Machine Check Exception !
Hello,
I get the following message under 2.4.21 from RedHat:
CPU 3: Machine Check Exception: 0000000000000004
<Bank 0: b20000001040080f
and the box is dead.
When i use parsemce, it said:
Status: (4) Machine Check in progress.
Restart IP invalid.
parsebank(0): b20000001040080f @ 3
External tag parity error
CPU state corrupt. Restart not possible Error enabled in control register
Error not corrected.
Bus and interconnect error
Participation: Local processor originated request
Timeout: Request did not timeout
Request: Generic error
Transaction type : Invalid
Memory/IO : Other
Can anybody please enlighten me what this means or what a possible problem behind might be?
Thank you in advance
PS: my box has dual Xeon 2.8G CPU
Quoted 24 lines · Legend W.
Hello,
I get the following message under 2.4.21 from RedHat:
CPU 3: Machine Check Exception: 0000000000000004
<Bank 0:b20000001040080fand the box is dead.
When i use parsemce, it said:
Status: (4) Machine Check in progress.
Restart IP invalid.
parsebank(0):b20000001040080f@ 3
External tag parity error
CPU state corrupt. Restart not possible Error enabled in control register
Error not corrected.
Bus and interconnect error
Participation: Local processor originated request
Timeout: Request did not timeout
Request: Generic error
Transaction type : Invalid
Memory/IO : Other
Quoted 6 lines
Can anybody please enlighten me what this means or what a possible problem behind might be?
Thank you in advance
PS: my box has dual Xeon 2.8G CPU
if you want to make your machine run any way use "nomce" at boot prompt against your respective grub entry.
Quoted 6 lines
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Quoted 28 lines · Nauman Tahir
Quoted 27 lines · Legend W.
Hello,
I get the following message under 2.4.21 from RedHat:
CPU 3: Machine Check Exception: 0000000000000004
<Bank 0:b20000001040080fand the box is dead.
When i use parsemce, it said:
Status: (4) Machine Check in progress.
Restart IP invalid.
parsebank(0):b20000001040080f@ 3
External tag parity error
CPU state corrupt. Restart not possible Error enabled in control register
Error not corrected.
Bus and interconnect error
Participation: Local processor originated request
Timeout: Request did not timeout
Request: Generic error
Transaction type : Invalid
Memory/IO : OtherCan anybody please enlighten me what this means or what a possible problem behind might be?
Quoted 6 lines
Quoted 3 lines
Thank you in advance
PS: my box has dual Xeon 2.8G CPU
if you want to make your machine run any way use "nomce" at boot prompt against your respective grub entry.
This is a terrible idea. MCEs indicate some kind of hardware problem, it would be idiotic to just ignore that.
Figure out the hardware problem and fix it (bad RAM, overheating, poorly seated card, etc).
Lee
Quoted 12 lines · Legend W.
parsebank(0):
b20000001040080f@ 3
External tag parity error
CPU state corrupt. Restart not possible Error enabled in control register
Error not corrected.
Bus and interconnect error
Participation: Local processor originated request
Timeout: Request did not timeout
Request: Generic error
Transaction type : Invalid
Memory/IO : Other
Quoted 2 lines
Can anybody please enlighten me what this means or what a possible problem behind might be?
Executive summary - your hardware is broken. In this case its reporting a parity error on external tag bits - presumably cache bits. "Contact your system vendor for advice" as they say 8)