hwmon: W83627THF VID fixes
PATCH 1/1 hwmon: W83627THF VID fixes
[PATCH] hwmon: W83627THF VID fixes
This patch fixes the VID reading; no cpu0_vid and vrm files created if the chip is w83627thf and GPIO5 not enabled.
Signed-off-by Yuan Mu <ymu at winbond.com.tw>
Signed-off-by Jean Delvare <khali at linux-fr.org>
Signed-off-by Greg Kroah-Hartman <gregkh at suse.de>
---
commit dd149c52223cfb05cdefb0755d3c2793e8d33ede
tree 78b0b51586442c66b0d4b948564a6d4863b29766
parent 9c516ef496c857aa4b1b41dc313010f11d39c496
author Yuan Mu <ymu at winbond.com.tw> Sat, 26 Nov 2005 20:13:18 +0100 committer Greg Kroah-Hartman <gregkh at suse.de> Thu, 05 Jan 2006 22:16:20 -0800
drivers/hwmon/w83627hf.c | 16 +++++++--------- 1 files changed, 7 insertions(+), 9 deletions(-)
drivers/hwmon/w83627hf.c +7 -9
@@ -1122,11 +1122,10 @@ static int w83627hf_detect(struct i2c_adif (kind != w83697hf)device_create_file_temp (new_client,3 ); -if (kind != w83697hf) +if (kind != w83697hf && data->vid !=0xff ) {device_create_file_vid (new_client); - -if (kind != w83697hf)device_create_file_vrm (new_client); + }device_create_file_fan_div (new_client,1 );device_create_file_fan_div (new_client,2 );
@@ -1232,7 +1231,7 @@ static int w83627thf_read_gpio5(struct i/* Make sure the pins are configured for input There must be at least five (VRM 9), and possibly 6 (VRM 10) */ - sel =superio_inb (W83627THF_GPIO5_IOSR ); + sel =superio_inb (W83627THF_GPIO5_IOSR ) &0x3f ;if ((sel &0x1f ) !=0x1f ) {dev_dbg (&client->dev,"GPIO5 not configured for VID " "function\n" );
@@ -1323,19 +1322,18 @@ static void w83627hf_init_client(structint hi =w83627hf_read_value (client,W83781D_REG_CHIPID ); data->vid = (lo &0x0f ) | ((hi &0x01 ) <<4 ); }else if (w83627thf = data->type) { - data->vid =w83627thf_read_gpio5 (client) &0x3f ; + data->vid =w83627thf_read_gpio5 (client); }/* Read VRM & OVT Config only once */ if (w83627thf = data->type || w83637hf = data->type) { data->vrm_ovt =w83627hf_read_value (client,W83627THF_REG_VRM_OVT_CFG ); - data->vrm = (data->vrm_ovt &0x01 ) ?90 :82 ; - }else { -/* Convert VID to voltage based on default VRM */ - data->vrm =vid_which_vrm (); } +/* Convert VID to voltage based on VRM */ + data->vrm =vid_which_vrm (); + tmp =w83627hf_read_value (client,W83781D_REG_SCFG1 );for (i =1 ; i <=3 ; i++) {if (!(tmp &BIT_SCFG1 [i -1 ])) {