Skip to contentSkip to conversation

"Can't deactivate volume group" on shutdown

linux-lvm Karl O. Pinc 1 participant 1 message Jan 10, 2006

lore
Share & tools
lore
#0 lore raw

Hi,

When I shutdown (or halt) on the console I get the message:

Can't deactivate volume group "vg00" with 1 open logical volume(s)

Which seems reasonable because my root partition is a logical volume, but I'm new to LVM2 and figure it's better to ask now than suffer wierd data corruption later.

Is this message normal? Do I have a problem?

Here's more detail:

Debian sarge. Fresh install. Linux 2.6 kernel. (2.8.8-2-686)

/dev/hda 300GB WD ATA drive. Only disk. /dev/hda1 400MB /boot
/dev/hda2 299.6GB Extended partition /dev/hda5 299.6GB Linux LVM
/dev/vg00 volume group with all of /dev/hda5 /dev/vg00/swap 400MB swap
/dev/vg00/root 5GB /
remainder of vg unused

All file systems ext3.

Drive: WDC WD3000JB-00KFA0
(Gnasty WD drive has all jumpers removed
to be lone master.)

System:
400MHz Celeron
IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)

Thanks.

Karl <[email protected]>
Free Software: "You don't pay back, you pay forward."
-- Robert A. Heinlein