Skip to contentSkip to conversation

PROBLEM: PCI WiFi card works with livecd's but not with HD install with Ali mobo.

DISCUSSION Matthew Marshall 3 participants 6 messages Jan 14, 2006

lore
Share & tools
lore
#0 lore raw

I am having problems using a DWL-G510 PCI 802.11g card (Atheros chipset) with my ASROCK 939Dual-SATA2. The really strange thing is that it works perfectly fine with every live-cd I have tried, but always fails from a hd install.

The problem is that, instead of flashing, one of the lights on the card is held constant, while the other remains off. This happens with both ndiswrapper and madwifi. Both of these drivers work fine without a hitch in both knoppix and slax.

This seems to be a bug with the driver for the southbridge (ULi M1567) as I had the card working fine with another mobo (with the same distro.)

Here is my hardware setup:
ASROCK 939Dual-SATA2 (with ULi M1567 southbridge) AMD64 3000+ (running in 32 bit mode)
ATI Radeon 9200 AGP (probably not relevent)
DWL-G510 PCI 802.11g
Lite-On DVD Burner (on Primary IDE)
Seagate Barracuda 7200RPM 80GB (on SATA; possibly problematic?)

I am currently running kernel 2.6.15. However, I have also tried a number of other versions, including the -mm tree, and using the kernel and modules from the Slax livecd. There wasn't any difference. pci=routeirq and noacip doesn't seem to change anything either.

dmesg output (with autoloading ath_pci):
http://pastebin.com/505478

lspci -v output:
http://pastebin.com/505481

Some more observations:
ath_pci (madwifi) loads and unloads without reporting any errors. However modprobe ndiswrapper shows the following in dmesg:
http://pastebin.com/505525
modprobe -r ndiswraper segfaults.

I would really appreciate some help here. Please let me know if there is anything more I can do. It seems that using a new/uncommon/weird chipset like this is almost begging for trouble :D

Thanks for reading,
Matthew Marshall

#1 lore raw
Quoted 8 lines · Matthew Marshall

I am having problems using a DWL-G510 PCI 802.11g card (Atheros chipset) with my ASROCK 939Dual-SATA2. The really strange thing is that it works perfectly fine with every live-cd I have tried, but always fails from a hd install.

The problem is that, instead of flashing, one of the lights on the card is held constant, while the other remains off. This happens with both ndiswrapper and madwifi. Both of these drivers work fine without a hitch in both knoppix and slax.

We can't help you with proprietary drivers on this list. Can you reproduce the problem with no proprietary drivers loaded?

Lee

#2 lore raw
Quoted 2 lines · you

We can't help you with proprietary drivers on this list. Can you reproduce the problem with no proprietary drivers loaded?

I have a PCI Ethernet card I'll try with.

Since bother drivers had the same result, and they both worked fine with another mobo, I thought it was a problem with the drivers for the mobo. But, I'll see if I get the same result with an untainted kernel.

Thanks,
Matthew Marshall

#3 lore raw
Quoted 9 lines · Matthew Marshall
Quoted 2 lines · you

We can't help you with proprietary drivers on this list. Can you reproduce the problem with no proprietary drivers loaded?

I have a PCI Ethernet card I'll try with.

Since bother drivers had the same result, and they both worked fine with another mobo, I thought it was a problem with the drivers for the mobo. But, I'll see if I get the same result with an untainted kernel.

OK.

Anyone know why the MadWifi site does not say up front in big letters that it's just a GPL'ed wrapper around a proprietary HAL? To read the Wiki you would think it's open source...

Lee

#4 lore raw
Quoted 10 lines · you
Quoted 9 lines · Matthew Marshall
Quoted 2 lines · you

We can't help you with proprietary drivers on this list. Can you reproduce the problem with no proprietary drivers loaded?

I have a PCI Ethernet card I'll try with.

Since bother drivers had the same result, and they both worked fine with another mobo, I thought it was a problem with the drivers for the mobo. But, I'll see if I get the same result with an untainted kernel.

I tried it with both an Ethernet adapter (realtek) and a pci sound card (Creative SoundBlaster.) The Ethernet adapter works fine with both live-cd (slax) and hd-install (archlinux) but I can't get the the soundcard to work with alsa on archlinux. However, as it does play when using /dev/dsp2 strait, this is possibly a different problem.

I guess I'll go ask on the madwifi mailing list. Sorry about the noise...

Quoted 3 lines

Anyone know why the MadWifi site does not say up front in big letters that it's just a GPL'ed wrapper around a proprietary HAL? To read the Wiki you would think it's open source...

My guess is that they're not to proud of that detail...

Any way, I had forgotten about that. I suppose my 'same results with two different drivers' reasoning melts away with that.

Thanks,
Matthew Marshall

#5 lore raw
Quoted 2 lines · Matthew Marshall

I tried it with both an Ethernet adapter (realtek) and a pci sound card (Creative SoundBlaster.)

Unfortunately "Creative PCI Soundblaster" is no longer enough information for us to identify the chipset, since Creative started marketing the (inferior) CA0106 devices as "SoundBlaster Live!" as well.

Please report your soundcard problem to the alsa-user list and include the output of "lspci -vn | grep -A1 0401".

Lee