BTTV broken on recent kernels
Hi. The last several kernel versions have led to broken bttv (up to 4 or 5 kernel versions ago, I could watch tv on either mplayer or xawtv), but lately bttv is broken. My card is an 'bt878 compatible built by ATI (ATI TV Wonder VE). I'm pretty certain it worked as late as 2.6.14-git7. I've peeked around /Changes and didn't see anything. I'm using the same build script as before, and a piece of lsmod shows
serial_core 14848 1 8250 rtc 9524 0 tuner 36908 0 bttv 148564 0 video_buf 15748 1 bttv compat_ioctl32 1152 1 bttv i2c_algo_bit 7432 1 bttv v4l2_common 6528 2 tuner,bttv btcx_risc 3720 1 bttv ir_common 7812 1 bttv tveeprom 12304 1 bttv i2c_core 14864 4 tuner,bttv,i2c_algo_bit,tveeprom videodev 6912 1 bttv snd_emu10k1 94628 2 snd_emu10k1_synth
..........also, a chunk of lspci shows:
0000:00:09.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 07) 0000:00:0b.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 02) 0000:00:0b.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 02)
....it's just that I get a blank (screen blanking due to no signal) screen when I start a tv application. I can try to change channels/tune frequencies, and it looks like the applications are trying, but nothing gets tuned in. To be fair, I must mention that I *ahem* taint the kernel with Nvidia stuff, and recently upgraded gcc (although it has always worked well with tainted kernel, and it broke before I upgraded gcc (to gcc version 4.0.2) on Debian Sarge. If you *really* want, I can revert XF86Config to use non-nvidia drivers (and revert back to the old version of gcc) and give a bug report from that, but I suspect things will remain broken. Mplayer compiles very well with the new version of gcc, and the new kernel (buit with the new version of gcc) does everything else (sound, firewire, cd/dvd/networking, disk I/O etc.) without problems.
Thanks in advance,
Bob
Quoted 5 lines · Bob Gill
Hi. The last several kernel versions have led to broken bttv (up to 4 or 5 kernel versions ago, I could watch tv on either mplayer or xawtv), but lately bttv is broken. My card is an 'bt878 compatible built by ATI (ATI TV Wonder VE). I'm pretty certain it worked as late as 2.6.14-git7.
You need to do a git bisect (check the list archives) to isolate the change that broke it.
Lee
Quoted 15 lines · Lee Revell
Quoted 3 lines · Bob Gill
Hi. The last several kernel versions have led to broken bttv (up to 4 or 5 kernel versions ago, I could watch tv on either mplayer or xawtv), but lately bttv is broken. My card is an 'bt878 compatible built by ATI (ATI TV Wonder VE). I'm pretty certain it worked as late as 2.6.14-git7.
You need to do a git bisect (check the list archives) to isolate the change that broke it.
Lee
OK. I will, but I will add a tiny bit of additional info first. dmesg shows bttv loading up like this:
Linux video capture interface: v1.00
bttv: driver version 0.9.16 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
bttv0: Bt878 (rev 2) at 0000:00:0b.0, irq: 5, latency: 32, mmio: 0xeb003000
bttv0: detected: ATI TV Wonder/VE [card=64], PCI subsystem ID is 1002:0003
bttv0: using: ATI TV-Wonder VE [card=64,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init]
bttv0: using tuner=19
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: i2c: checking for TDA9887 @ 0x86... not found
tuner 0-0060: All bytes are equal. It is not a TEA5767
tuner 0-0060: chip found @ 0xc0 (bt878 #0 [sw])
tuner 0-0060: type set to 19 (Temic PAL* auto (4006 FN5))
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: PLL: 28636363 => 35468950 .. ok
Real Time Clock Driver v1.12ac
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled .....and when trying to tune audio comes in, but dmsg shows video giving:
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
bttv0: PLL can sleep, using XTAL (28636363).
bttv0: PLL: 28636363 => 35468950 .. ok
bttv0: PLL can sleep, using XTAL (28636363).
bttv0: PLL: 28636363 => 35468950 .. ok
bttv0: PLL can sleep, using XTAL (28636363).
bttv0: SCERR @ 348ec014,bits: HSYNC OFLOW FBUS SCERR*
bttv0: SCERR @ 348ec000,bits: OFLOW FBUS SCERR*
.... I will do the git bisect and reply in a bit.
Thanks for your reply,
Bob
Quoted 20 lines · Bob Gill
Hi. The last several kernel versions have led to broken bttv (up to 4 or 5 kernel versions ago, I could watch tv on either mplayer or xawtv), but lately bttv is broken. My card is an 'bt878 compatible built by ATI (ATI TV Wonder VE). I'm pretty certain it worked as late as
2.6.14-git7. I've peeked around /Changes and didn't see anything. I'm
using the same build script as before, and a piece of lsmod showsserial_core 14848 1 8250 rtc 9524 0 tuner 36908 0 bttv 148564 0 video_buf 15748 1 bttv compat_ioctl32 1152 1 bttv i2c_algo_bit 7432 1 bttv v4l2_common 6528 2 tuner,bttv btcx_risc 3720 1 bttv ir_common 7812 1 bttv tveeprom 12304 1 bttv i2c_core 14864 4 tuner,bttv,i2c_algo_bit,tveeprom videodev 6912 1 bttv snd_emu10k1 94628 2 snd_emu10k1_synth
Quoted 14 lines
..........also, a chunk of lspci shows:
0000:00:09.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 07)
0000:00:0b.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 02)
0000:00:0b.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 02)
....it's just that I get a blank (screen blanking due to no signal) screen when I start a tv application. I can try to change channels/tune frequencies, and it looks like the applications are trying, but nothing
gets tuned in. To be fair, I must mention that I *ahem* taint the
kernel with Nvidia stuff, and recently upgraded gcc (although it has always worked well with tainted kernel, and it broke before I upgraded gcc (to gcc version 4.0.2) on Debian Sarge.
This problem sounds suspiciously like an overlay bug, known in the binary NVIDIA driver. Please try changing it to "nv" in XF86Config, then restarting your TV application..
Quoted 9 lines
If you *really* want, I can
revert XF86Config to use non-nvidia drivers (and revert back to the old version of gcc) and give a bug report from that, but I suspect things will remain broken. Mplayer compiles very well with the new version of gcc, and the new kernel (buit with the new version of gcc) does everything else (sound, firewire, cd/dvd/networking, disk I/O etc.) without problems.
Thanks in advance,
Bob
Signature · 6 lines
Cheers, Alistair. 'No sense being pessimistic, it probably wouldn't work anyway.' Third year Computer Science undergraduate. 1F2 55 South Clerk Street, Edinburgh, UK.
Quoted 40 lines · Alistair John Strachan
Quoted 20 lines · Bob Gill
Hi. The last several kernel versions have led to broken bttv (up to 4 or 5 kernel versions ago, I could watch tv on either mplayer or xawtv), but lately bttv is broken. My card is an 'bt878 compatible built by ATI (ATI TV Wonder VE). I'm pretty certain it worked as late as
2.6.14-git7. I've peeked around /Changes and didn't see anything. I'm
using the same build script as before, and a piece of lsmod showsserial_core 14848 1 8250 rtc 9524 0 tuner 36908 0 bttv 148564 0 video_buf 15748 1 bttv compat_ioctl32 1152 1 bttv i2c_algo_bit 7432 1 bttv v4l2_common 6528 2 tuner,bttv btcx_risc 3720 1 bttv ir_common 7812 1 bttv tveeprom 12304 1 bttv i2c_core 14864 4 tuner,bttv,i2c_algo_bit,tveeprom videodev 6912 1 bttv snd_emu10k1 94628 2 snd_emu10k1_synthQuoted 16 lines
..........also, a chunk of lspci shows:
0000:00:09.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 07)
0000:00:0b.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 02)
0000:00:0b.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 02)
....it's just that I get a blank (screen blanking due to no signal) screen when I start a tv application. I can try to change channels/tune frequencies, and it looks like the applications are trying, but nothing
gets tuned in. To be fair, I must mention that I *ahem* taint the
kernel with Nvidia stuff, and recently upgraded gcc (although it has always worked well with tainted kernel, and it broke before I upgraded gcc (to gcc version 4.0.2) on Debian Sarge.
Quoted 17 lines
This problem sounds suspiciously like an overlay bug, known in the binary NVIDIA driver. Please try changing it to "nv" in XF86Config, then restarting your TV application..
Quoted 10 lines
If you *really* want, I can revert XF86Config to use non-nvidia drivers (and revert back to the old version of gcc) and give a bug report from that, but I suspect things
will remain broken. Mplayer compiles very well with the new version of
gcc, and the new kernel (buit with the new version of gcc) does
everything else (sound, firewire, cd/dvd/networking, disk I/O etc.)
without problems.
Thanks in advance,
Bob
Alistair, Lee: thank you for your replies. Sadly the bug is in the Nvidia binary. Changing the driver to nv from nvidia did resolve the issue. Now I have to decide whether I like accelerated 3d more, or using the tv tuner more (till Nvidia fixes the driver). Thank you for your time. I won't waste any more LKML bandwidth on this (Nvidia bug). Thanks again. Bob
Quoted 58 lines · Bob Gill
Quoted 39 lines · Alistair John Strachan
Quoted 20 lines · Bob Gill
Hi. The last several kernel versions have led to broken bttv (up to 4 or 5 kernel versions ago, I could watch tv on either mplayer or xawtv), but lately bttv is broken. My card is an 'bt878 compatible built by ATI (ATI TV Wonder VE). I'm pretty certain it worked as late as
2.6.14-git7. I've peeked around /Changes and didn't see anything. I'm
using the same build script as before, and a piece of lsmod showsserial_core 14848 1 8250 rtc 9524 0 tuner 36908 0 bttv 148564 0 video_buf 15748 1 bttv compat_ioctl32 1152 1 bttv i2c_algo_bit 7432 1 bttv v4l2_common 6528 2 tuner,bttv btcx_risc 3720 1 bttv ir_common 7812 1 bttv tveeprom 12304 1 bttv i2c_core 14864 4 tuner,bttv,i2c_algo_bit,tveeprom videodev 6912 1 bttv snd_emu10k1 94628 2 snd_emu10k1_synthQuoted 14 lines
..........also, a chunk of lspci shows:
0000:00:09.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 07)
0000:00:0b.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 02)
0000:00:0b.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 02)
....it's just that I get a blank (screen blanking due to no signal) screen when I start a tv application. I can try to change channels/tune frequencies, and it looks like the applications are trying, but nothing
gets tuned in. To be fair, I must mention that I *ahem* taint the
kernel with Nvidia stuff, and recently upgraded gcc (although it has always worked well with tainted kernel, and it broke before I upgraded gcc (to gcc version 4.0.2) on Debian Sarge.Quoted 17 lines
This problem sounds suspiciously like an overlay bug, known in the binary NVIDIA driver. Please try changing it to "nv" in XF86Config, then restarting your TV application..
Quoted 9 lines
If you *really* want, I can revert XF86Config to use non-nvidia drivers (and revert back to the old version of gcc) and give a bug report from that, but I suspect things
will remain broken. Mplayer compiles very well with the new version of
gcc, and the new kernel (buit with the new version of gcc) does
everything else (sound, firewire, cd/dvd/networking, disk I/O etc.)
without problems.
Thanks in advance,
Bob
Quoted 2 lines
Alistair, Lee: thank you for your replies. Sadly the bug is in the Nvidia binary. Changing the driver to nv from nvidia did resolve the issue. Now I have to decide whether I like accelerated 3d more, or using the tv tuner more (till Nvidia fixes the driver). Thank you for your time. I won't waste any more LKML bandwidth on this (Nvidia bug). Thanks again. Bob
Not that I would recommend the binary nvidia driver, but:
You can probably get bttv to work despite this overlay bug by using "grabdisplay" mode instead. There is an option for it in xawtv. The difference is, in overlay mode, the capture card is writing directly to videoram. Using grabdisplay mode eliminates this optimization, and would be a decent workaround for you.
Hope this helps,
Michael
Signature · 1 line
Michael Krufky
Quoted 5 lines · Michael Krufky
Quoted 3 lines
Alistair, Lee: thank you for your replies. Sadly the bug is in the Nvidia binary. Changing the driver to nv from nvidia did resolve the issue. Now I have to decide whether I like accelerated 3d more, or using the tv tuner more (till Nvidia fixes the driver). Thank you for your time. I won't waste any more LKML bandwidth on this (Nvidia bug). Thanks again. Bob
Quoted 8 lines
Not that I would recommend the binary nvidia driver, but:
You can probably get bttv to work despite this overlay bug by using "grabdisplay" mode instead. There is an option for it in xawtv. The difference is, in overlay mode, the capture card is writing directly to videoram. Using grabdisplay mode eliminates this optimization, and would be a decent workaround for you.
Hope this helps,
Michael
I haven't tried using nv with grabdisplay instead of overlay, but I have recently run a large (nvidia...and no, I don't work for them) patch against the 81.78 driver (about 5 small patches all in one) and it works successfully on 2.6.16-rc1-git3 (in both grabdisplay and overlay modes). The only thing I noted is that the old nvidia binaries wanted a channel frequency offset of 108, but with the (heavily patched) 81.78 driver, you don't need an channel frequency offset (both xawtv and mplayer). Your test is simple to try though, and if it doesn't work, I'll reply and mention it. Thanks for your reply.
Bob