PAN with DLink Access Point DBT-900AP

Bluez-devel Maximilian Michel 2 participants 2 messages Jan 26, 2006 Bluetooth drivers

Share & tools

Maximilian Michel

author

2006-01-26 10:19 UTC #0 lore raw

I think now it's a PIN problem.

as i can see from hcidump
< HCI Command: Create Connection (0x01|0x0005) plen 13
bdaddr 00:0D:88:9F:38:A5 ptype 0xcc18 rswitch 0x01 clkoffset 0x0000 Packet type: DM1 DM3 DM5 DH1 DH3 DH5

Quoted 3 lines

HCI Event: Command Status (0x0f) plen 4
HCI Event: Role Change (0x12) plen 8
HCI Event: PIN Code Request (0x16) plen 6

the establishment of the connection requires a PIN, but no pin_helper or anything else is opened. What do i have to change?

Thanks,

Maximilian

-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&dat=121642
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel

Marcel Holtmann

maintainer

2006-01-26 11:21 UTC #1 lore raw

Hi Maximilian,

Quoted 6 lines

I think now it's a PIN problem.
as i can see from hcidump
< HCI Command: Create Connection (0x01|0x0005) plen 13
bdaddr 00:0D:88:9F:38:A5 ptype 0xcc18 rswitch 0x01 clkoffset 0x0000 Packet type: DM1 DM3 DM5 DH1 DH3 DH5

Quoted 6 lines

Quoted 3 lines
HCI Event: Command Status (0x0f) plen 4
HCI Event: Role Change (0x12) plen 8
HCI Event: PIN Code Request (0x16) plen 6
the establishment of the connection requires a PIN, but no pin_helper or anything else is opened. What do i have to change?

make sure that hcid is running and then check the syslog messages.

Regards

Marcel