[Bluez-users] No device listing under hciconfig on Lifebook E8020

Mick Wever

author

2006-02-09 19:37 UTC #0 lore raw

I cannot get any device listed using hciconfig.
Trying both the internal bluetooth to the Fujitsu-Siemens Lifebook E8020

cat /proc/bus/usb/devices | grep -e^[TPD] | grep -e Cls=e0 -B1 -A1

T:  Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=e0(unk. ) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=044e ProdID=3001 Rev=11.68

And a external Bluetooth USB dongle:

T:  Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=e0(unk. ) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0a12 ProdID=0001 Rev= 5.25

I'm running Gentoo GNU/Linux: 2.6.14-gentoo-r5
Using bluez-libs-2.25 and bluez-utils-2.25

Most frustrating is I cannot find any errors anywhere (dmesg).

Can anybody help me?

mck

-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&dat=121642
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

Marcel Holtmann

maintainer

2006-02-10 00:56 UTC #1 lore raw

Hi Mick,

Quoted 16 lines

I cannot get any device listed using hciconfig.
Trying both the internal bluetooth to the Fujitsu-Siemens Lifebook E8020
cat /proc/bus/usb/devices | grep -e^[TPD] | grep -e Cls=e0 -B1 -A1
T:  Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=e0(unk. ) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=044e ProdID=3001 Rev=11.68
And a external Bluetooth USB dongle:
T:  Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=e0(unk. ) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0a12 ProdID=0001 Rev= 5.25

Quoted 4 lines

I'm running Gentoo GNU/Linux: 2.6.14-gentoo-r5
Using bluez-libs-2.25 and bluez-utils-2.25
Most frustrating is I cannot find any errors anywhere (dmesg).

show us the complete devices entry for these two adapters. And make sure that hci_usb is loaded.

Regards

Marcel

-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&dat=121642
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users

Mick Wever

author

2006-02-10 09:31 UTC #2 lore raw

Quoted 3 lines

.... And make sure
that hci_usb is loaded.

A combination of kernel upgrade to 2.6.15 and loading hci_usb fixed the problem.
Thanks the the immediate help!
mck

-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&dat=121642
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users