Skip to contentSkip to conversation

New dock patches

PATCH In review Kristen Accardi 3 participants 5 messages Feb 22, 2006 – Feb 23, 2006 ACPI

lore
Share & tools
lore
#0 lore raw

cover New dock patches

Hello, this is a new set of docking station patches which replaces the old docking station patches. It applies to 2.6.16-rc4-mm1. It is new and improved over the old version, in that it can now handle laptops which define docking stations outside of the scope of PCI.

Thanks to everyone who provided feedback on the original patches, and especially to Pavel who is the only brave soul to test these patches out so far :). As always, I would appreciate feedback on these patches.

Kristen

#1 lore raw

Hi!

Quoted 9 lines

Hello, this is a new set of docking station patches which replaces the old docking station patches. It applies to 2.6.16-rc4-mm1. It is new and improved over the old version, in that it can now handle laptops which define docking stations outside of the scope of PCI.

Thanks to everyone who provided feedback on the original patches, and especially to Pavel who is the only brave soul to test these patches out so far :). As always, I would appreciate feedback on these patches.

I tested the new version from today... it works okay. It produces some weird messages:

acpiphp: Slot [4294967295] registered
ACPI Exception (acpi_bus-0072): AE_NOT_FOUND, No context for object [c1d081e8] [20060210]
PCI: Found IBM Dock II Cardbus Bridge applying quirk
PCI: Found IBM Dock II Cardbus Bridge applying quirk
PCI: Transparent bridge - 0000:02:03.0
PCI: Bus #0c (-#0f) is hidden behind transparent bridge #02 (-#0b) Please report the result to linux-kernel to fix this permanently
PCI: Bus #10 (-#13) is hidden behind transparent bridge #02 (-#0b) Please report the result to linux-kernel to fix this permanently ACPI Exception (acpi_bus-0072): AE_NOT_FOUND, No context for object [c1d02368] [20060210]

Could the code be fixed not to start numbering slots from -1?

Pavel

Signature · 1 line
Web maintainer for suspend.sf.net (www.sf.net/projects/suspend) wanted...
#2 lore raw
Quoted 28 lines · Pavel Machek

Hi!

Quoted 9 lines

Hello, this is a new set of docking station patches which replaces the old docking station patches. It applies to 2.6.16-rc4-mm1. It is new and improved over the old version, in that it can now handle laptops which define docking stations outside of the scope of PCI.

Thanks to everyone who provided feedback on the original patches, and especially to Pavel who is the only brave soul to test these patches out so far :). As always, I would appreciate feedback on these patches.

I tested the new version from today... it works okay. It produces some weird messages:

acpiphp: Slot [4294967295] registered
ACPI Exception (acpi_bus-0072): AE_NOT_FOUND, No context for object [c1d081e8] [20060210]
PCI: Found IBM Dock II Cardbus Bridge applying quirk
PCI: Found IBM Dock II Cardbus Bridge applying quirk
PCI: Transparent bridge - 0000:02:03.0
PCI: Bus #0c (-#0f) is hidden behind transparent bridge #02 (-#0b) Please report the result to linux-kernel to fix this permanently
PCI: Bus #10 (-#13) is hidden behind transparent bridge #02 (-#0b) Please report the result to linux-kernel to fix this permanently ACPI Exception (acpi_bus-0072): AE_NOT_FOUND, No context for object [c1d02368] [20060210]

Quoted 3 lines

Could the code be fixed not to start numbering slots from -1?

Pavel

Yeah, the problem is that laptops don't implement _SUN, which is used for the slot numbering by the existing acpiphp code. So the slot number will read -1 if _SUN is missing. I'm not sure if 0 is a valid slot number, and I wasn't sure if that would make sense either. I think that I'm going to have to provide a separate user space interface to the dock anyway, since we now know that it's possible to have a dock station that has no pci slots at all.

#3 lore raw
Quoted 21 lines
Quoted 17 lines

I tested the new version from today... it works okay. It produces some weird messages:

acpiphp: Slot [4294967295] registered
ACPI Exception (acpi_bus-0072): AE_NOT_FOUND, No context for object [c1d081e8] [20060210]
PCI: Found IBM Dock II Cardbus Bridge applying quirk
PCI: Found IBM Dock II Cardbus Bridge applying quirk
PCI: Transparent bridge - 0000:02:03.0
PCI: Bus #0c (-#0f) is hidden behind transparent bridge #02 (-#0b) Please report the result to linux-kernel to fix this permanently
PCI: Bus #10 (-#13) is hidden behind transparent bridge #02 (-#0b) Please report the result to linux-kernel to fix this permanently ACPI Exception (acpi_bus-0072): AE_NOT_FOUND, No context for object [c1d02368] [20060210]

Quoted 3 lines

Could the code be fixed not to start numbering slots from -1?

Pavel

Quoted 7 lines

Yeah, the problem is that laptops don't implement _SUN, which is used for the slot numbering by the existing acpiphp code. So the slot number will read -1 if _SUN is missing. I'm not sure if 0 is a valid slot number, and I wasn't sure if that would make sense either. I think that I'm going to have to provide a separate user space interface to the dock anyway, since we now know that it's possible to have a dock station that has no pci slots at all.

I'd certainly say that 0 is better slot number then -1... If it is easy to make it 0 instead of -1, please change it.
Pavel

Signature · 1 line
Web maintainer for suspend.sf.net (www.sf.net/projects/suspend) wanted...
#4 lore raw
In reply to Pavel Machek
Quoted 15 lines · Pavel Machek

Hi!

Quoted 9 lines

Hello, this is a new set of docking station patches which replaces the old docking station patches. It applies to 2.6.16-rc4-mm1. It is new and improved over the old version, in that it can now handle laptops which define docking stations outside of the scope of PCI.

Thanks to everyone who provided feedback on the original patches, and especially to Pavel who is the only brave soul to test these patches out so far :). As always, I would appreciate feedback on these patches.

I tested the new version from today... it works okay. It produces some weird messages:

Quoted 13 lines

acpiphp: Slot [4294967295] registered
ACPI Exception (acpi_bus-0072): AE_NOT_FOUND, No context for object [c1d081e8] [20060210]
PCI: Found IBM Dock II Cardbus Bridge applying quirk
PCI: Found IBM Dock II Cardbus Bridge applying quirk
PCI: Transparent bridge - 0000:02:03.0
PCI: Bus #0c (-#0f) is hidden behind transparent bridge #02 (-#0b) Please report the result to linux-kernel to fix this permanently
PCI: Bus #10 (-#13) is hidden behind transparent bridge #02 (-#0b) Please report the result to linux-kernel to fix this permanently ACPI Exception (acpi_bus-0072): AE_NOT_FOUND, No context for object [c1d02368] [20060210]

The ACPI exceptions are ok, it just means that we are looking for an object that doesn't exist yet - which is expected since we are hotplugging it. The PCI warnings I also get on my system - but I think they are not relevant, because if I look at lspci after docking, the bus numbers for the dock bridge do not hide the new cardbus bus numbers - I think the subordinate bus numbers for the parent bus are fixed up after this message. Can you send your lspci -vv output so we can make sure that your bridge bus number is being done correctly? I also assume you are still using pci=assign-busses as well.

Here's my error message:

[  262.092000] PCI: Bus #0c (-#0f) is hidden behind transparent bridge #02 (-#0b) 
[  262.092000] PCI: Bus #10 (-#13) is hidden behind transparent bridge #02 (-#0b) 

But then, the output of lspci after docking shows the bus numbers are ok:

***** Dock Bridge's Parent - Note subordinate bus number *****

0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 81) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+
Latency: 0
Bus: primary=00, secondary=02, subordinate=13, sec-latency=64
I/O behind bridge: 00004000-00008fff
Memory behind bridge: c0200000-cfffffff
Prefetchable memory behind bridge: e8000000-efffffff
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-

**** Dock Bridge + new cardbus controllers on dock station ******

0000:02:03.0 PCI bridge: Texas Instruments PCI2032 PCI Docking Bridge (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 0x10 (64 bytes)
Bus: primary=02, secondary=0b, subordinate=13, sec-latency=64
I/O behind bridge: 00005000-00005fff
Memory behind bridge: ca000000-ceffffff
Prefetchable memory behind bridge: c6000000-c9ffffff
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [80] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+

0000:0b:02.0 CardBus bridge: Texas Instruments PCI1420
Subsystem: IBM: Unknown device 0148
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 168, Cache Line Size: 0x20 (128 bytes)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at ce000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=0b, secondary=0c, subordinate=0f, sec-latency=176
Memory window 0: c6000000-c7fff000 (prefetchable)
Memory window 1: ca000000-cbfff000
I/O window 0: 00005000-000050ff
I/O window 1: 00005400-000054ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+
16-bit legacy interface ports at 0001

0000:0b:02.1 CardBus bridge: Texas Instruments PCI1420

	Subsystem: IBM: Unknown device 0148
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 168, Cache Line Size: 0x20 (128 bytes)
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at ce001000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=0b, secondary=10, subordinate=13, sec-latency=176
	Memory window 0: c8000000-c9fff000 (prefetchable)
	Memory window 1: cc000000-cdfff000
	I/O window 0: 00005800-000058ff
	I/O window 1: 00005c00-00005cff
	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
	16-bit legacy interface ports at 0001

0000:0c:00.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 09)
Subsystem: Intel Corp. EtherExpress PRO/100 Cardbus
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 11
Region 0: Memory at ca020000 (32-bit, non-prefetchable) [disabled] [size=4K] Region 1: I/O ports at 5000 [disabled] [size=64]
Region 2: Memory at ca000000 (32-bit, non-prefetchable) [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-