Skip to contentSkip to conversation

powerpc: restore eeh_add_device_late() prototype

PATCH In review Mark Fasheh 2 participants 5 messages Mar 1, 2006

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 powerpc: restore eeh_add_device_late() prototype

A search on the linux-kernel, linuxppc-dev mailing lists and the git tree at
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc didn't show
this issue fixed or reported. If I missed something please ignore :)

I get a compile failure trying to build a powerpc kernel:

arch/powerpc/platforms/pseries/eeh.c: In function `eeh_add_device_tree_late':
arch/powerpc/platforms/pseries/eeh.c:901: warning: implicit declaration of function `eeh_add_device_late' arch/powerpc/platforms/pseries/eeh.c: At top level:
arch/powerpc/platforms/pseries/eeh.c:918: error: conflicting types for 'eeh_add_device_late' arch/powerpc/platforms/pseries/eeh.c:901: error: previous implicit declaration of 'eeh_add_device_late' was here make[2]: *** [arch/powerpc/platforms/pseries/eeh.o] Error 1

It seems commit 827c1a6c1a5dcb2902fecfb648f9af6a532934eb removed this prototype from eeh.h. The following patch restores it.

	--Mark
include/asm-powerpc/eeh.h +3 -0
index 7dfb408..4250fa1 100644
@@ -62,6 +62,7 @@ void __init pci_addr_cache_build(void);
  */
 void eeh_add_device_early(struct device_node *);
 void eeh_add_device_tree_early(struct device_node *);
+void eeh_add_device_late(struct pci_dev *);
 void eeh_add_device_tree_late(struct pci_bus *);
 
 /**
@@ -117,6 +118,8 @@ static inline void pci_addr_cache_build(
 
 static inline void eeh_add_device_early(struct device_node *dn) { }
 
+static inline void eeh_add_device_late(struct pci_dev *dev) { }
+
 static inline void eeh_remove_device(struct pci_dev *dev) { }
 
 static inline void eeh_add_device_tree_early(struct device_node *dn) { }
#1 lore raw

Sigh, I forgot to actually CC [email protected], and I also left off my signed-off-by line (added below). Sorry about that.

On Tue, Feb 28, 2006 at 04:19:09PM -0800, Mark Fasheh wrote:
A search on the linux-kernel, linuxppc-dev mailing lists and the git tree at
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc didn't show
this issue fixed or reported. If I missed something please ignore :)

I get a compile failure trying to build a powerpc kernel:

arch/powerpc/platforms/pseries/eeh.c: In function `eeh_add_device_tree_late':
arch/powerpc/platforms/pseries/eeh.c:901: warning: implicit declaration of function `eeh_add_device_late' arch/powerpc/platforms/pseries/eeh.c: At top level:
arch/powerpc/platforms/pseries/eeh.c:918: error: conflicting types for 'eeh_add_device_late' arch/powerpc/platforms/pseries/eeh.c:901: error: previous implicit declaration of 'eeh_add_device_late' was here make[2]: *** [arch/powerpc/platforms/pseries/eeh.o] Error 1

It seems commit 827c1a6c1a5dcb2902fecfb648f9af6a532934eb removed this prototype from eeh.h. The following patch restores it.

include/asm-powerpc/eeh.h +3 -0
index 7dfb408..4250fa1 100644
@@ -62,6 +62,7 @@ void __init pci_addr_cache_build(void);
  */
 void eeh_add_device_early(struct device_node *);
 void eeh_add_device_tree_early(struct device_node *);
+void eeh_add_device_late(struct pci_dev *);
 void eeh_add_device_tree_late(struct pci_bus *);
 
 /**
@@ -117,6 +118,8 @@ static inline void pci_addr_cache_build(
 
 static inline void eeh_add_device_early(struct device_node *dn) { }
 
+static inline void eeh_add_device_late(struct pci_dev *dev) { }
+
 static inline void eeh_remove_device(struct pci_dev *dev) { }
 
 static inline void eeh_add_device_tree_early(struct device_node *dn) { }
#2 lore raw

PATCH 1/1 move eeh_add_device_tree_late()

Good catch, Mark.

Commit 827c1a6c1a5dcb2902fecfb648f9af6a532934eb introduced a new function that calls eeh_add_device_late() implicitly. This patch reorders the two functions in question to fix the compile error. This might be preferable to exposing eeh_add_device_late() in eeh.h.

Apologies Paul/everyone, please don't kill me.

Thanks-
John

arch/powerpc/platforms/pseries/eeh.c renamed from arch/powerpc/platforms/pseries/eeh.c~fix_eeh_bb +14 -14
diff -puN arch/powerpc/platforms/pseries/eeh.c~fix_eeh_bb arch/powerpc/platforms/pseries/eeh.c
@@ -893,20 +893,6 @@ void eeh_add_device_tree_early(struct de
 }
 EXPORT_SYMBOL_GPL(eeh_add_device_tree_early);
 
-void eeh_add_device_tree_late(struct pci_bus *bus)
-{
-	struct pci_dev *dev;
-
-	list_for_each_entry(dev, &bus->devices, bus_list) {
- 		eeh_add_device_late(dev);
- 		if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
- 			struct pci_bus *subbus = dev->subordinate;
- 			if (subbus)
- 				eeh_add_device_tree_late(subbus);
- 		}
-	}
-}
-
 /**
  * eeh_add_device_late - perform EEH initialization for the indicated pci device
  * @dev: pci device for which to set up EEH
@@ -935,6 +921,20 @@ void eeh_add_device_late(struct pci_dev 
 }
 EXPORT_SYMBOL_GPL(eeh_add_device_late);
 
+void eeh_add_device_tree_late(struct pci_bus *bus)
+{
+	struct pci_dev *dev;
+
+	list_for_each_entry(dev, &bus->devices, bus_list) {
+ 		eeh_add_device_late(dev);
+ 		if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
+ 			struct pci_bus *subbus = dev->subordinate;
+ 			if (subbus)
+ 				eeh_add_device_tree_late(subbus);
+ 		}
+	}
+}
+
 /**
  * eeh_remove_device - undo EEH setup for the indicated pci device
  * @dev: pci device to be removed

_

#3 lore raw

Re: [PATCH] move eeh_add_device_tree_late()

Quoted 1 line · John Rose

Good catch, Mark.

Heh, thanks.

Quoted 4 lines

Commit 827c1a6c1a5dcb2902fecfb648f9af6a532934eb introduced a new function that calls eeh_add_device_late() implicitly. This patch reorders the two functions in question to fix the compile error. This might be preferable to exposing eeh_add_device_late() in eeh.h.

Hmm, you still left the EXPORT_SYMBOL(eeh_add_device_late) and you didn't make eeh_add_device_late() static. Shouldn't you do that if you don't want to make it accessible outside of eeh.c?

	--Mark

--
Mark Fasheh
Senior Software Developer, Oracle
[email protected]

#4 lore raw

PATCH 1/1 move eeh_add_device_tree_late()

Quoted 4 lines

Hmm, you still left the EXPORT_SYMBOL(eeh_add_device_late) and you didn't make eeh_add_device_late() static. Shouldn't you do that if you don't want to make it accessible outside of eeh.c?

	--Mark

Again, good points. Ever have one of those days? Take 2.

Commit 827c1a6c1a5dcb2902fecfb648f9af6a532934eb introduced a new function that calls eeh_add_device_late() implicitly. This patch reorders the two functions in question to fix the compile error. This might be preferable to exposing eeh_add_device_late() in eeh.h.

Thanks-
John

arch/powerpc/platforms/pseries/eeh.c renamed from arch/powerpc/platforms/pseries/eeh.c~fix_eeh_bb +15 -16
diff -puN arch/powerpc/platforms/pseries/eeh.c~fix_eeh_bb arch/powerpc/platforms/pseries/eeh.c
@@ -893,20 +893,6 @@ void eeh_add_device_tree_early(struct de
 }
 EXPORT_SYMBOL_GPL(eeh_add_device_tree_early);
 
-void eeh_add_device_tree_late(struct pci_bus *bus)
-{
-	struct pci_dev *dev;
-
-	list_for_each_entry(dev, &bus->devices, bus_list) {
- 		eeh_add_device_late(dev);
- 		if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
- 			struct pci_bus *subbus = dev->subordinate;
- 			if (subbus)
- 				eeh_add_device_tree_late(subbus);
- 		}
-	}
-}
-
 /**
  * eeh_add_device_late - perform EEH initialization for the indicated pci device
  * @dev: pci device for which to set up EEH
@@ -914,7 +900,7 @@ void eeh_add_device_tree_late(struct pci
  * This routine must be used to complete EEH initialization for PCI
  * devices that were added after system boot (e.g. hotplug, dlpar).
  */
-void eeh_add_device_late(struct pci_dev *dev)
+static void eeh_add_device_late(struct pci_dev *dev)
 {
 	struct device_node *dn;
 	struct pci_dn *pdn;
@@ -933,7 +919,20 @@ void eeh_add_device_late(struct pci_dev 
 
 	pci_addr_cache_insert_device (dev);
 }
-EXPORT_SYMBOL_GPL(eeh_add_device_late);
+
+void eeh_add_device_tree_late(struct pci_bus *bus)
+{
+	struct pci_dev *dev;
+
+	list_for_each_entry(dev, &bus->devices, bus_list) {
+ 		eeh_add_device_late(dev);
+ 		if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
+ 			struct pci_bus *subbus = dev->subordinate;
+ 			if (subbus)
+ 				eeh_add_device_tree_late(subbus);
+ 		}
+	}
+}
 
 /**
  * eeh_remove_device - undo EEH setup for the indicated pci device

_