Skip to contentSkip to conversation

pci hotplug: add common acpi functions to core

PATCH In review Kristen Accardi 4 participants 10 messages Mar 1, 2006 – Mar 3, 2006

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 pci hotplug: add common acpi functions to core

shpchprm_acpi.c and pciehprm_acpi.c are nearly identical.
In addition, there are functions in both these files that
are also in acpiphp_glue.c. This patch will remove duplicate functions from shpchp, pciehp, and acpiphp and move this functionality to pci_hotplug, as it is not hardware specific. Get rid of shpchprm* and pciehprm* files since they are no longer needed. shpchprm_nonacpi.c and pciehprm_nonacpi.c are identical, as well as shpchprm_legacy.c and can be replaced with a macro.

---

 dev/null                               |binary
 dev/null                               |binary
 drivers/pci/hotplug/pciehprm_acpi.c    |  257 ---------------------------------
 drivers/pci/hotplug/pciehprm_nonacpi.c |   47 ------
 drivers/pci/hotplug/shpchprm_acpi.c    |  186 -----------------------
 drivers/pci/hotplug/shpchprm_legacy.c  |   54 ------
 drivers/pci/hotplug/shpchprm_nonacpi.c |   57 -------
 drivers/pci/hotplug/Makefile           |   17 --
 drivers/pci/hotplug/acpi_pcihp.c       |  201 +++++++++++++++++++++++++
 drivers/pci/hotplug/acpiphp_glue.c     |   28 ---
 drivers/pci/hotplug/pci_hotplug.h      |   17 ++
 drivers/pci/hotplug/pciehp.h           |   19 +-
 drivers/pci/hotplug/pciehp_hpc.c       |   69 ++++++++
 drivers/pci/hotplug/shpchp.h           |   25 +--
 drivers/pci/hotplug/shpchp_core.c      |   17 ++
 13 files changed, 331 insertions(+), 663 deletions(-)
drivers/pci/hotplug/Makefile +3 -14
@@ -22,6 +22,9 @@ ifdef CONFIG_HOTPLUG_PCI_CPCI
 pci_hotplug-objs	+=	cpci_hotplug_core.o	\
 				cpci_hotplug_pci.o
 endif
+ifdef CONFIG_ACPI
+pci_hotplug-objs 	+= 	acpi_pcihp.o
+endif
 
 cpqphp-objs		:=	cpqphp_core.o	\
 				cpqphp_ctrl.o	\
@@ -51,23 +54,9 @@ pciehp-objs		:=	pciehp_core.o	\
 				pciehp_ctrl.o	\
 				pciehp_pci.o	\
 				pciehp_hpc.o
-ifdef CONFIG_ACPI
-	pciehp-objs += pciehprm_acpi.o
-else
-	pciehp-objs += pciehprm_nonacpi.o
-endif
 
 shpchp-objs		:=	shpchp_core.o	\
 				shpchp_ctrl.o	\
 				shpchp_pci.o	\
 				shpchp_sysfs.o	\
 				shpchp_hpc.o
-ifdef CONFIG_ACPI
-	shpchp-objs += shpchprm_acpi.o
-else
-	ifdef CONFIG_HOTPLUG_PCI_SHPC_PHPRM_LEGACY
-		shpchp-objs += shpchprm_legacy.o
-	else
-		shpchp-objs += shpchprm_nonacpi.o
-	endif
-endif
drivers/pci/hotplug/acpi_pcihp.c new file +201 -0

201 lines not on this page · raw message

drivers/pci/hotplug/acpiphp_glue.c +0 -28
@@ -1408,34 +1408,6 @@ void handle_hotplug_event_func(acpi_hand
 	}
 }
 
-static int is_root_bridge(acpi_handle handle)
-{
-	acpi_status status;
-	struct acpi_device_info *info;
-	struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
-	int i;
-
-	status = acpi_get_object_info(handle, &buffer);
-	if (ACPI_SUCCESS(status)) {
-		info = buffer.pointer;
-		if ((info->valid & ACPI_VALID_HID) &&
-			!strcmp(PCI_ROOT_HID_STRING,
-					info->hardware_id.value)) {
-			acpi_os_free(buffer.pointer);
-			return 1;
-		}
-		if (info->valid & ACPI_VALID_CID) {
-			for (i=0; i < info->compatibility_id.count; i++) {
-				if (!strcmp(PCI_ROOT_HID_STRING,
-					info->compatibility_id.id[i].value)) {
-					acpi_os_free(buffer.pointer);
-					return 1;
-				}
-			}
-		}
-	}
-	return 0;
-}
 
 static acpi_status
 find_root_bridges(acpi_handle handle, u32 lvl, void *context, void **rv)
drivers/pci/hotplug/pci_hotplug.h +17 -0
@@ -176,5 +176,22 @@ extern int pci_hp_change_slot_info	(stru
 					 struct hotplug_slot_info *info);
 extern struct subsystem pci_hotplug_slots_subsys;
 
+struct hotplug_params {
+	u8 cache_line_size;
+	u8 latency_timer;
+	u8 enable_serr;
+	u8 enable_perr;
+};
+
+#ifdef CONFIG_ACPI
+#include <acpi/acpi.h>
+#include <acpi/acpi_bus.h>
+#include <acpi/actypes.h>
+extern acpi_status acpi_run_oshp(acpi_handle handle);
+extern void acpi_get_hp_params_from_firmware(struct pci_dev *dev,
+		struct hotplug_params *hpp);
+extern u8 * acpi_path_name( acpi_handle	handle);
+int is_root_bridge(acpi_handle handle);
+#endif
 #endif
 
drivers/pci/hotplug/pciehp.h +10 -9
@@ -50,12 +50,6 @@ extern int pciehp_force;
 #define info(format, arg...) printk(KERN_INFO "%s: " format, MY_NAME , ## arg)
 #define warn(format, arg...) printk(KERN_WARNING "%s: " format, MY_NAME , ## arg)
 
-struct hotplug_params {
-	u8 cache_line_size;
-	u8 latency_timer;
-	u8 enable_serr;
-	u8 enable_perr;
-};
 
 struct slot {
 	struct slot *next;
@@ -192,9 +186,6 @@ extern u8	pciehp_handle_power_fault	(u8 
 /* pci functions */
 extern int	pciehp_configure_device		(struct slot *p_slot);
 extern int	pciehp_unconfigure_device	(struct slot *p_slot);
-extern int	pciehp_get_hp_hw_control_from_firmware(struct pci_dev *dev);
-extern void	pciehp_get_hp_params_from_firmware(struct pci_dev *dev,
-	       	struct hotplug_params *hpp);
 
 
 
@@ -286,4 +277,14 @@ struct hpc_ops {
 	int	(*check_lnk_status)	(struct controller *ctrl);
 };
 
+
+#ifdef CONFIG_ACPI
+#define pciehp_get_hp_hw_control_from_firmware(dev) \
+	pciehp_acpi_get_hp_hw_control_from_firmware(dev)
+#define pciehp_get_hp_params_from_firmware(dev, hpp) \
+	acpi_get_hp_params_from_firmware(dev, hpp)
+#else
+#define pciehp_get_hp_hw_control_from_firmware(dev) 	0
+#define acpi_get_hp_params_from_firmware(dev, hpp)
+#endif 				/* CONFIG_ACPI */
 #endif				/* _PCIEHP_H */
drivers/pci/hotplug/pciehp_hpc.c +69 -0

81 lines not on this page · raw message

drivers/pci/hotplug/pciehprm_acpi.c deleted +0 -257

257 lines not on this page · raw message

drivers/pci/hotplug/pciehprm_nonacpi.c deleted +0 -47

47 lines not on this page · raw message

drivers/pci/hotplug/shpchp.h +14 -11
@@ -106,12 +106,6 @@ struct controller {
 	volatile int cmd_busy;
 };
 
-struct hotplug_params {
-	u8	cache_line_size;
-	u8	latency_timer;
-	u8	enable_serr;
-	u8	enable_perr;
-};
 
 /* Define AMD SHPC ID  */
 #define PCI_DEVICE_ID_AMD_GOLAM_7450	0x7450 
@@ -193,15 +187,24 @@ extern u8	shpchp_handle_power_fault(u8 h
 extern int	shpchp_save_config(struct controller *ctrl, int busnumber, int num_ctlr_slots, int first_device_num);
 extern int	shpchp_configure_device(struct slot *p_slot);
 extern int	shpchp_unconfigure_device(struct slot *p_slot);
-extern void	get_hp_hw_control_from_firmware(struct pci_dev *dev);
-extern void	get_hp_params_from_firmware(struct pci_dev *dev,
-		struct hotplug_params *hpp);
-extern int	shpchprm_get_physical_slot_number(struct controller *ctrl,
-		u32 *sun, u8 busnum, u8 devnum);
 extern void	shpchp_remove_ctrl_files(struct controller *ctrl);
 extern void	cleanup_slots(struct controller *ctrl);
 extern void	queue_pushbutton_work(void *data);
 
+
+#ifdef CONFIG_ACPI
+#define get_hp_params_from_firmware(dev, hpp) \
+	acpi_get_hp_params_from_firmware(dev, hpp)
+#define get_hp_hw_control_from_firmware(pdev) \
+	do { \
+		if (DEVICE_ACPI_HANDLE(&(pdev->dev))) \
+			acpi_run_oshp(DEVICE_ACPI_HANDLE(&(pdev->dev))); \
+	} while (0)
+#else
+#define get_hp_params_from_firmware(dev, hpp)
+#define get_hp_hw_control_from_firmware(dev)
+#endif
+
 struct ctrl_reg {
 	volatile u32 base_offset;
 	volatile u32 slot_avail1;
drivers/pci/hotplug/shpchp_core.c +17 -0
@@ -104,6 +104,23 @@ static void make_slot_name(struct slot *
 		 slot->bus, slot->number);
 }
 
+
+
+
+static int
+shpchprm_get_physical_slot_number(struct controller *ctrl, u32 *sun,
+				u8 busnum, u8 devnum)
+{
+	int offset = devnum - ctrl->slot_device_offset;
+
+	dbg("%s: ctrl->slot_num_inc %d, offset %d\n", __FUNCTION__,
+			ctrl->slot_num_inc, offset);
+	*sun = (u8) (ctrl->first_slot + ctrl->slot_num_inc *offset);
+	return 0;
+}
+
+
+
 static int init_slots(struct controller *ctrl)
 {
 	struct slot *slot;
drivers/pci/hotplug/shpchprm_acpi.c deleted +0 -186

186 lines not on this page · raw message

drivers/pci/hotplug/shpchprm_legacy.c deleted +0 -54

54 lines not on this page · raw message

drivers/pci/hotplug/shpchprm_nonacpi.c deleted +0 -57

57 lines not on this page · raw message

#1 lore raw
Quoted 8 lines · Kristen Accardi

shpchprm_acpi.c and pciehprm_acpi.c are nearly identical.
In addition, there are functions in both these files that
are also in acpiphp_glue.c. This patch will remove duplicate functions from shpchp, pciehp, and acpiphp and move this functionality to pci_hotplug, as it is not hardware specific. Get rid of shpchprm* and pciehprm* files since they are no longer needed. shpchprm_nonacpi.c and pciehprm_nonacpi.c are identical, as well as shpchprm_legacy.c and can be replaced with a macro.

Looks good, only a minor comment:

Quoted 1 line

+u8 * acpi_path_name( acpi_handle handle)

Funky spacing here.

Quoted 19 lines
drivers/pci/hotplug/acpi_pcihp.c new file +19 -0
+int is_root_bridge(acpi_handle handle)
+{
+	acpi_status status;
+	struct acpi_device_info *info;
+	struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
+	int i;
+
+	status = acpi_get_object_info(handle, &buffer);
+	if (ACPI_SUCCESS(status)) {
+		info = buffer.pointer;
+		if ((info->valid & ACPI_VALID_HID) &&
+			!strcmp(PCI_ROOT_HID_STRING,
+					info->hardware_id.value)) {
+			acpi_os_free(buffer.pointer);
+			return 1;
+		}
+		if (info->valid & ACPI_VALID_CID) {
+			for (i=0; i < info->compatibility_id.count; i++) {
+				if (!strcmp(PCI_ROOT_HID_STRING,

drivers/pci/hotplug/acpi_pcihp.c line 201

Quoted 10 lines
drivers/pci/hotplug/acpi_pcihp.c new file +10 -0
+					info->compatibility_id.id[i].value)) {
+					acpi_os_free(buffer.pointer);
+					return 1;
+				}
+			}
+		}
+	}
+	return 0;
+}
+EXPORT_SYMBOL_GPL(is_root_bridge);

The name "is_root_bridge" is pretty generic. Especially as it wants an acpi handle. "acpi_is_root_bridge" perhaps?

thanks,

greg k-h

#2 lore raw
In reply to Kristen Accardi
Quoted 31 lines · On Tue, 28 Feb 2006 16:46:57 -0800 Kristen Accardi wrote:

shpchprm_acpi.c and pciehprm_acpi.c are nearly identical.
In addition, there are functions in both these files that
are also in acpiphp_glue.c. This patch will remove duplicate functions from shpchp, pciehp, and acpiphp and move this functionality to pci_hotplug, as it is not hardware specific. Get rid of shpchprm* and pciehprm* files since they are no longer needed. shpchprm_nonacpi.c and pciehprm_nonacpi.c are identical, as well as shpchprm_legacy.c and can be replaced with a macro.

---

 13 files changed, 331 insertions(+), 663 deletions(-)
drivers/pci/hotplug/acpi_pcihp.c new file +15 -0
@@ -0,0 +1,201 @@
+/*
+ * ACPI related functions for PCI hotplug drivers
+ *
+ * Copyright (C) 2006 Intel Corporation
+ *
+ * All rights reserved.
+ *
+ * Send feedback to <[email protected]>
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/pci.h>

drivers/pci/hotplug/acpi_pcihp.c line 25

Quoted 10 lines
drivers/pci/hotplug/acpi_pcihp.c new file +10 -0
+#include <acpi/acpi.h>
+#include <acpi/acpi_bus.h>
+#include <acpi/actypes.h>
+#include "pci_hotplug.h"
+
+#define	METHOD_NAME__SUN	"_SUN"
+#define	METHOD_NAME__HPP	"_HPP"
+#define	METHOD_NAME_OSHP	"OSHP"
+
+u8 * acpi_path_name( acpi_handle	handle)

odd spacing.

Quoted 4 lines
drivers/pci/hotplug/acpi_pcihp.c new file +4 -0
+{
+	acpi_status		status;
+	static u8	path_name[ACPI_PATHNAME_MAX];
+	struct acpi_buffer		ret_buf = { ACPI_PATHNAME_MAX, path_name };

drivers/pci/hotplug/acpi_pcihp.c line 54

Quoted 10 lines
drivers/pci/hotplug/acpi_pcihp.c new file +10 -0
+
+	memset(path_name, 0, sizeof (path_name));
+	status = acpi_get_name(handle, ACPI_FULL_PATHNAME, &ret_buf);
+
+	if (ACPI_FAILURE(status))
+		return NULL;
+	else
+		return path_name;
+}
+EXPORT_SYMBOL_GPL(acpi_path_name);

Can acpi_path_name() be used safely by more than 1 caller? Previously it was duplicated, so the return <path_name> was duplicated, which made it multiple-caller safe. Now it seems that in a worst-case scenario, one caller's path could be clobbered by another. ? or maybe (probably) caller 1 is finished with it before caller 2 can ever run. ?

drivers/pci/hotplug/acpi_pcihp.c line 138

Quoted 12 lines
drivers/pci/hotplug/acpi_pcihp.c new file +12 -0
+acpi_status acpi_run_oshp(acpi_handle handle)
+{
+	acpi_status		status;
+	u8			*path_name = acpi_path_name(handle);
+
+	/* run OSHP */
+	status = acpi_evaluate_object(handle, METHOD_NAME_OSHP, NULL, NULL);
+	if (ACPI_FAILURE(status)) {
+		printk(KERN_ERR "%s:%s OSHP fails=0x%x\n", __FUNCTION__,
+			path_name, status);
+	} else {
+		pr_debug("%s:%s OSHP passes\n", __FUNCTION__, path_name);

{} braces not needed here (on the if nor the else).

drivers/pci/hotplug/acpi_pcihp.c line 142

Quoted 4 lines
drivers/pci/hotplug/acpi_pcihp.c new file +4 -0
+	}
+	return status;
+}
+EXPORT_SYMBOL_GPL(acpi_run_oshp);

A little kernel-doc for non-static (non-private) functions would be a good thing.

Quoted 32 lines
drivers/pci/hotplug/acpi_pcihp.c new file +29 -0
+int is_root_bridge(acpi_handle handle)
+{
+	acpi_status status;
+	struct acpi_device_info *info;
+	struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
+	int i;
+
+	status = acpi_get_object_info(handle, &buffer);
+	if (ACPI_SUCCESS(status)) {
+		info = buffer.pointer;
+		if ((info->valid & ACPI_VALID_HID) &&
+			!strcmp(PCI_ROOT_HID_STRING,
+					info->hardware_id.value)) {
+			acpi_os_free(buffer.pointer);
+			return 1;
+		}
+		if (info->valid & ACPI_VALID_CID) {
+			for (i=0; i < info->compatibility_id.count; i++) {
+				if (!strcmp(PCI_ROOT_HID_STRING,
+					info->compatibility_id.id[i].value)) {
+					acpi_os_free(buffer.pointer);
+					return 1;
+				}
+			}
+		}
+	}
+	return 0;
+}
+EXPORT_SYMBOL_GPL(is_root_bridge);

drivers/pci/hotplug/pci_hotplug.h extern int pci_hp_change_slot_info (stru · line 184

Quoted 9 lines
drivers/pci/hotplug/pci_hotplug.h +9 -0
@@ -176,5 +176,22 @@ extern int pci_hp_change_slot_info	(stru
+
+#ifdef CONFIG_ACPI
+#include <acpi/acpi.h>
+#include <acpi/acpi_bus.h>
+#include <acpi/actypes.h>
+extern acpi_status acpi_run_oshp(acpi_handle handle);
+extern void acpi_get_hp_params_from_firmware(struct pci_dev *dev,
+		struct hotplug_params *hpp);
+extern u8 * acpi_path_name( acpi_handle	handle);

odd spacing (again).

drivers/pci/hotplug/pciehp_hpc.c line 43

Quoted 13 lines
drivers/pci/hotplug/pci_hotplug.h +2 -0
+int is_root_bridge(acpi_handle handle);
+#endif
 #endif
 
drivers/pci/hotplug/pciehp_hpc.c +3 -0
@@ -38,6 +38,9 @@
 
 #include "../pci.h"
 #include "pciehp.h"
+#ifdef CONFIG_ACPI
+#include <linux/pci-acpi.h>
+#endif

Does this driver work with or without ACPI, depending on CONFIG_ACPI?

We don't usually bracket #includes in .c files with ifdef/endif.

Quoted 6 lines
drivers/pci/hotplug/shpchp.h +2 -0
@@ -193,15 +187,24 @@ extern u8	shpchp_handle_power_fault(u8 h
 
+
+#ifdef CONFIG_ACPI

drivers/pci/hotplug/shpchp.h extern u8 shpchp_handle_power_fault(u8 h · line 199

Quoted 10 lines
drivers/pci/hotplug/shpchp.h +10 -0
+#define get_hp_params_from_firmware(dev, hpp) \
+	acpi_get_hp_params_from_firmware(dev, hpp)
+#define get_hp_hw_control_from_firmware(pdev) \
+	do { \
+		if (DEVICE_ACPI_HANDLE(&(pdev->dev))) \
+			acpi_run_oshp(DEVICE_ACPI_HANDLE(&(pdev->dev))); \
+	} while (0)
+#else
+#define get_hp_params_from_firmware(dev, hpp)
+#define get_hp_hw_control_from_firmware(dev)

usually empty macros are like so in Linux:
#define foo(bar) do { } while(0)

drivers/pci/hotplug/shpchp.h extern u8 shpchp_handle_power_fault(u8 h · line 201

Quoted 2 lines
drivers/pci/hotplug/shpchp.h +2 -0
+#endif
+

---
~Randy

#3 lore raw
In reply to Kristen Accardi

Hi Kristen,

This looks very nice to me!

Here is one comment.

Quoted 19 lines
drivers/pci/hotplug/acpi_pcihp.c new file +19 -0
+int is_root_bridge(acpi_handle handle)
+{
+	acpi_status status;
+	struct acpi_device_info *info;
+	struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
+	int i;
+
+	status = acpi_get_object_info(handle, &buffer);
+	if (ACPI_SUCCESS(status)) {
+		info = buffer.pointer;
+		if ((info->valid & ACPI_VALID_HID) &&
+			!strcmp(PCI_ROOT_HID_STRING,
+					info->hardware_id.value)) {
+			acpi_os_free(buffer.pointer);
+			return 1;
+		}
+		if (info->valid & ACPI_VALID_CID) {
+			for (i=0; i < info->compatibility_id.count; i++) {
+				if (!strcmp(PCI_ROOT_HID_STRING,

drivers/pci/hotplug/acpi_pcihp.c line 201

Quoted 10 lines
drivers/pci/hotplug/acpi_pcihp.c new file +10 -0
+					info->compatibility_id.id[i].value)) {
+					acpi_os_free(buffer.pointer);
+					return 1;
+				}
+			}
+		}
+	}
+	return 0;
+}
+EXPORT_SYMBOL_GPL(is_root_bridge);

I think this seems to leak memory (buffer.pointer), though I guess you just copy and paste from the original code. I think we need to free buffer.pointer whenever acpi_get_object_info() returns as success.

Thanks,
Kenji Kaneshige

Quoted 1,155 lines · Kristen Accardi

shpchprm_acpi.c and pciehprm_acpi.c are nearly identical.
In addition, there are functions in both these files that
are also in acpiphp_glue.c. This patch will remove duplicate functions from shpchp, pciehp, and acpiphp and move this functionality to pci_hotplug, as it is not hardware specific. Get rid of shpchprm* and pciehprm* files since they are no longer needed. shpchprm_nonacpi.c and pciehprm_nonacpi.c are identical, as well as shpchprm_legacy.c and can be replaced with a macro.

---

 dev/null                               |binary
 dev/null                               |binary
 drivers/pci/hotplug/pciehprm_acpi.c    |  257 ---------------------------------
 drivers/pci/hotplug/pciehprm_nonacpi.c |   47 ------
 drivers/pci/hotplug/shpchprm_acpi.c    |  186 -----------------------
 drivers/pci/hotplug/shpchprm_legacy.c  |   54 ------
 drivers/pci/hotplug/shpchprm_nonacpi.c |   57 -------
 drivers/pci/hotplug/Makefile           |   17 --
 drivers/pci/hotplug/acpi_pcihp.c       |  201 +++++++++++++++++++++++++
 drivers/pci/hotplug/acpiphp_glue.c     |   28 ---
 drivers/pci/hotplug/pci_hotplug.h      |   17 ++
 drivers/pci/hotplug/pciehp.h           |   19 +-
 drivers/pci/hotplug/pciehp_hpc.c       |   69 ++++++++
 drivers/pci/hotplug/shpchp.h           |   25 +--
 drivers/pci/hotplug/shpchp_core.c      |   17 ++
 13 files changed, 331 insertions(+), 663 deletions(-)
drivers/pci/hotplug/Makefile +3 -14
@@ -22,6 +22,9 @@ ifdef CONFIG_HOTPLUG_PCI_CPCI
 pci_hotplug-objs	+=	cpci_hotplug_core.o	\
 				cpci_hotplug_pci.o
 endif
+ifdef CONFIG_ACPI
+pci_hotplug-objs 	+= 	acpi_pcihp.o
+endif
 
 cpqphp-objs		:=	cpqphp_core.o	\
 				cpqphp_ctrl.o	\
@@ -51,23 +54,9 @@ pciehp-objs		:=	pciehp_core.o	\
 				pciehp_ctrl.o	\
 				pciehp_pci.o	\
 				pciehp_hpc.o
-ifdef CONFIG_ACPI
-	pciehp-objs += pciehprm_acpi.o
-else
-	pciehp-objs += pciehprm_nonacpi.o
-endif
 
 shpchp-objs		:=	shpchp_core.o	\
 				shpchp_ctrl.o	\
 				shpchp_pci.o	\
 				shpchp_sysfs.o	\
 				shpchp_hpc.o
-ifdef CONFIG_ACPI
-	shpchp-objs += shpchprm_acpi.o
-else
-	ifdef CONFIG_HOTPLUG_PCI_SHPC_PHPRM_LEGACY
-		shpchp-objs += shpchprm_legacy.o
-	else
-		shpchp-objs += shpchprm_nonacpi.o
-	endif
-endif
drivers/pci/hotplug/acpi_pcihp.c new file +201 -0
@@ -0,0 +1,201 @@
+/*
+ * ACPI related functions for PCI hotplug drivers
+ *
+ * Copyright (C) 2006 Intel Corporation
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Send feedback to <[email protected]>
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <acpi/acpi.h>
+#include <acpi/acpi_bus.h>
+#include <acpi/actypes.h>
+#include "pci_hotplug.h"
+
+#define	METHOD_NAME__SUN	"_SUN"
+#define	METHOD_NAME__HPP	"_HPP"
+#define	METHOD_NAME_OSHP	"OSHP"
+
+u8 * acpi_path_name( acpi_handle	handle)
+{
+	acpi_status		status;
+	static u8	path_name[ACPI_PATHNAME_MAX];
+	struct acpi_buffer		ret_buf = { ACPI_PATHNAME_MAX, path_name };
+
+	memset(path_name, 0, sizeof (path_name));
+	status = acpi_get_name(handle, ACPI_FULL_PATHNAME, &ret_buf);
+
+	if (ACPI_FAILURE(status))
+		return NULL;
+	else
+		return path_name;
+}
+EXPORT_SYMBOL_GPL(acpi_path_name);
+
+static acpi_status
+acpi_run_hpp(acpi_handle handle, struct hotplug_params *hpp)
+{
+	acpi_status		status;
+	u8			nui[4];
+	struct acpi_buffer	ret_buf = { 0, NULL};
+	union acpi_object	*ext_obj, *package;
+	u8			*path_name = acpi_path_name(handle);
+	int			i, len = 0;
+
+	/* get _hpp */
+	status = acpi_evaluate_object(handle, METHOD_NAME__HPP, NULL, &ret_buf);
+	switch (status) {
+	case AE_BUFFER_OVERFLOW:
+		ret_buf.pointer = kmalloc (ret_buf.length, GFP_KERNEL);
+		if (!ret_buf.pointer) {
+			printk(KERN_ERR "%s:%s alloc for _HPP fail\n",
+				__FUNCTION__, path_name);
+			return AE_NO_MEMORY;
+		}
+		status = acpi_evaluate_object(handle, METHOD_NAME__HPP,
+				NULL, &ret_buf);
+		if (ACPI_SUCCESS(status))
+			break;
+	default:
+		if (ACPI_FAILURE(status)) {
+			pr_debug("%s:%s _HPP fail=0x%x\n", __FUNCTION__,
+					path_name, status);
+			return status;
+		}
+	}
+
+	ext_obj = (union acpi_object *) ret_buf.pointer;
+	if (ext_obj->type != ACPI_TYPE_PACKAGE) {
+		printk(KERN_ERR "%s:%s _HPP obj not a package\n", __FUNCTION__,
+				path_name);
+		status = AE_ERROR;
+		goto free_and_return;
+	}
+
+	len = ext_obj->package.count;
+	package = (union acpi_object *) ret_buf.pointer;
+	for ( i = 0; (i < len) || (i < 4); i++) {
+		ext_obj = (union acpi_object *) &package->package.elements[i];
+		switch (ext_obj->type) {
+		case ACPI_TYPE_INTEGER:
+			nui[i] = (u8)ext_obj->integer.value;
+			break;
+		default:
+			printk(KERN_ERR "%s:%s _HPP obj type incorrect\n",
+				__FUNCTION__, path_name);
+			status = AE_ERROR;
+			goto free_and_return;
+		}
+	}
+
+	hpp->cache_line_size = nui[0];
+	hpp->latency_timer = nui[1];
+	hpp->enable_serr = nui[2];
+	hpp->enable_perr = nui[3];
+
+	pr_debug("  _HPP: cache_line_size=0x%x\n", hpp->cache_line_size);
+	pr_debug("  _HPP: latency timer  =0x%x\n", hpp->latency_timer);
+	pr_debug("  _HPP: enable SERR    =0x%x\n", hpp->enable_serr);
+	pr_debug("  _HPP: enable PERR    =0x%x\n", hpp->enable_perr);
+
+free_and_return:
+	kfree(ret_buf.pointer);
+	return status;
+}
+
+acpi_status acpi_run_oshp(acpi_handle handle)
+{
+	acpi_status		status;
+	u8			*path_name = acpi_path_name(handle);
+
+	/* run OSHP */
+	status = acpi_evaluate_object(handle, METHOD_NAME_OSHP, NULL, NULL);
+	if (ACPI_FAILURE(status)) {
+		printk(KERN_ERR "%s:%s OSHP fails=0x%x\n", __FUNCTION__,
+			path_name, status);
+	} else {
+		pr_debug("%s:%s OSHP passes\n", __FUNCTION__, path_name);
+	}
+	return status;
+}
+EXPORT_SYMBOL_GPL(acpi_run_oshp);
+
+
+
+void acpi_get_hp_params_from_firmware(struct pci_dev *dev,
+		struct hotplug_params *hpp)
+{
+	acpi_status status = AE_NOT_FOUND;
+	struct pci_dev *pdev = dev;
+
+	/*
+	 * _HPP settings apply to all child buses, until another _HPP is
+	 * encountered. If we don't find an _HPP for the input pci dev,
+	 * look for it in the parent device scope since that would apply to
+	 * this pci dev. If we don't find any _HPP, use hardcoded defaults
+	 */
+	while (pdev && (ACPI_FAILURE(status))) {
+		acpi_handle handle = DEVICE_ACPI_HANDLE(&(pdev->dev));
+		if (!handle)
+			break;
+		status = acpi_run_hpp(handle, hpp);
+		if (!(pdev->bus->parent))
+			break;
+		/* Check if a parent object supports _HPP */
+		pdev = pdev->bus->parent->self;
+	}
+}
+EXPORT_SYMBOL_GPL(acpi_get_hp_params_from_firmware);
+
+
+
+int is_root_bridge(acpi_handle handle)
+{
+	acpi_status status;
+	struct acpi_device_info *info;
+	struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
+	int i;
+
+	status = acpi_get_object_info(handle, &buffer);
+	if (ACPI_SUCCESS(status)) {
+		info = buffer.pointer;
+		if ((info->valid & ACPI_VALID_HID) &&
+			!strcmp(PCI_ROOT_HID_STRING,
+					info->hardware_id.value)) {
+			acpi_os_free(buffer.pointer);
+			return 1;
+		}
+		if (info->valid & ACPI_VALID_CID) {
+			for (i=0; i < info->compatibility_id.count; i++) {
+				if (!strcmp(PCI_ROOT_HID_STRING,
+					info->compatibility_id.id[i].value)) {
+					acpi_os_free(buffer.pointer);
+					return 1;
+				}
+			}
+		}
+	}
+	return 0;
+}
+EXPORT_SYMBOL_GPL(is_root_bridge);
drivers/pci/hotplug/acpiphp_glue.c +0 -28
@@ -1408,34 +1408,6 @@ void handle_hotplug_event_func(acpi_hand
 	}
 }
 
-static int is_root_bridge(acpi_handle handle)
-{
-	acpi_status status;
-	struct acpi_device_info *info;
-	struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
-	int i;
-
-	status = acpi_get_object_info(handle, &buffer);
-	if (ACPI_SUCCESS(status)) {
-		info = buffer.pointer;
-		if ((info->valid & ACPI_VALID_HID) &&
-			!strcmp(PCI_ROOT_HID_STRING,
-					info->hardware_id.value)) {
-			acpi_os_free(buffer.pointer);
-			return 1;
-		}
-		if (info->valid & ACPI_VALID_CID) {
-			for (i=0; i < info->compatibility_id.count; i++) {
-				if (!strcmp(PCI_ROOT_HID_STRING,
-					info->compatibility_id.id[i].value)) {
-					acpi_os_free(buffer.pointer);
-					return 1;
-				}
-			}
-		}
-	}
-	return 0;
-}
 
 static acpi_status
 find_root_bridges(acpi_handle handle, u32 lvl, void *context, void **rv)
drivers/pci/hotplug/pci_hotplug.h +17 -0
@@ -176,5 +176,22 @@ extern int pci_hp_change_slot_info	(stru
 					 struct hotplug_slot_info *info);
 extern struct subsystem pci_hotplug_slots_subsys;
 
+struct hotplug_params {
+	u8 cache_line_size;
+	u8 latency_timer;
+	u8 enable_serr;
+	u8 enable_perr;
+};
+
+#ifdef CONFIG_ACPI
+#include <acpi/acpi.h>
+#include <acpi/acpi_bus.h>
+#include <acpi/actypes.h>
+extern acpi_status acpi_run_oshp(acpi_handle handle);
+extern void acpi_get_hp_params_from_firmware(struct pci_dev *dev,
+		struct hotplug_params *hpp);
+extern u8 * acpi_path_name( acpi_handle	handle);
+int is_root_bridge(acpi_handle handle);
+#endif
 #endif
 
drivers/pci/hotplug/pciehp.h +10 -9
@@ -50,12 +50,6 @@ extern int pciehp_force;
 #define info(format, arg...) printk(KERN_INFO "%s: " format, MY_NAME , ## arg)
 #define warn(format, arg...) printk(KERN_WARNING "%s: " format, MY_NAME , ## arg)
 
-struct hotplug_params {
-	u8 cache_line_size;
-	u8 latency_timer;
-	u8 enable_serr;
-	u8 enable_perr;
-};
 
 struct slot {
 	struct slot *next;
@@ -192,9 +186,6 @@ extern u8	pciehp_handle_power_fault	(u8 
 /* pci functions */
 extern int	pciehp_configure_device		(struct slot *p_slot);
 extern int	pciehp_unconfigure_device	(struct slot *p_slot);
-extern int	pciehp_get_hp_hw_control_from_firmware(struct pci_dev *dev);
-extern void	pciehp_get_hp_params_from_firmware(struct pci_dev *dev,
-	       	struct hotplug_params *hpp);
 
 
 
@@ -286,4 +277,14 @@ struct hpc_ops {
 	int	(*check_lnk_status)	(struct controller *ctrl);
 };
 
+
+#ifdef CONFIG_ACPI
+#define pciehp_get_hp_hw_control_from_firmware(dev) \
+	pciehp_acpi_get_hp_hw_control_from_firmware(dev)
+#define pciehp_get_hp_params_from_firmware(dev, hpp) \
+	acpi_get_hp_params_from_firmware(dev, hpp)
+#else
+#define pciehp_get_hp_hw_control_from_firmware(dev) 	0
+#define acpi_get_hp_params_from_firmware(dev, hpp)
+#endif 				/* CONFIG_ACPI */
 #endif				/* _PCIEHP_H */
drivers/pci/hotplug/pciehp_hpc.c +69 -0
@@ -38,6 +38,9 @@
 
 #include "../pci.h"
 #include "pciehp.h"
+#ifdef CONFIG_ACPI
+#include <linux/pci-acpi.h>
+#endif
 
 #ifdef DEBUG
 #define DBG_K_TRACE_ENTRY      ((unsigned int)0x00000001)	/* On function entry */
@@ -1236,6 +1239,72 @@ static struct hpc_ops pciehp_hpc_ops = {
 	.check_lnk_status		= hpc_check_lnk_status,
 };
 
+#ifdef CONFIG_ACPI
+int pciehp_acpi_get_hp_hw_control_from_firmware(struct pci_dev *dev)
+{
+	acpi_status status;
+	acpi_handle chandle, handle = DEVICE_ACPI_HANDLE(&(dev->dev));
+	struct pci_dev *pdev = dev;
+	struct pci_bus *parent;
+	u8 *path_name;
+
+	/*
+	 * Per PCI firmware specification, we should run the ACPI _OSC
+	 * method to get control of hotplug hardware before using it.
+	 * If an _OSC is missing, we look for an OSHP to do the same thing.
+	 * To handle different BIOS behavior, we look for _OSC and OSHP
+	 * within the scope of the hotplug controller and its parents, upto
+	 * the host bridge under which this controller exists.
+	 */
+	while (!handle) {
+		/*
+		 * This hotplug controller was not listed in the ACPI name
+		 * space at all. Try to get acpi handle of parent pci bus.
+		 */
+		if (!pdev || !pdev->bus->parent)
+			break;
+		parent = pdev->bus->parent;
+		dbg("Could not find %s in acpi namespace, trying parent\n",
+				pci_name(pdev));
+		if (!parent->self)
+			/* Parent must be a host bridge */
+			handle = acpi_get_pci_rootbridge_handle(
+					pci_domain_nr(parent),
+					parent->number);
+		else
+			handle = DEVICE_ACPI_HANDLE(
+					&(parent->self->dev));
+		pdev = parent->self;
+	}
+
+	while (handle) {
+		path_name = acpi_path_name(handle);
+		dbg("Trying to get hotplug control for %s \n", path_name);
+		status = pci_osc_control_set(handle,
+				OSC_PCI_EXPRESS_NATIVE_HP_CONTROL);
+		if (status == AE_NOT_FOUND)
+			status = acpi_run_oshp(handle);
+		if (ACPI_SUCCESS(status)) {
+			dbg("Gained control for hotplug HW for pci %s (%s)\n",
+				pci_name(dev), path_name);
+			return 0;
+		}
+		if (is_root_bridge(handle))
+			break;
+		chandle = handle;
+		status = acpi_get_parent(chandle, &handle);
+		if (ACPI_FAILURE(status))
+			break;
+	}
+
+	err("Cannot get control of hotplug hardware for pci %s\n",
+			pci_name(dev));
+	return -1;
+}
+#endif
+
+
+
 int pcie_init(struct controller * ctrl, struct pcie_device *dev)
 {
 	struct php_ctlr_state_s *php_ctlr, *p;
drivers/pci/hotplug/pciehprm_acpi.c deleted +0 -257
@@ -1,257 +0,0 @@
-/*
- * PCIEHPRM ACPI: PHP Resource Manager for ACPI platform
- *
- * Copyright (C) 2003-2004 Intel Corporation
- *
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT.  See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Send feedback to <[email protected]>
- *
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/acpi.h>
-#include <linux/pci-acpi.h>
-#include <acpi/acpi_bus.h>
-#include <acpi/actypes.h>
-#include "pciehp.h"
-
-#define	METHOD_NAME__SUN	"_SUN"
-#define	METHOD_NAME__HPP	"_HPP"
-#define	METHOD_NAME_OSHP	"OSHP"
-
-static u8 * acpi_path_name( acpi_handle	handle)
-{
-	acpi_status		status;
-	static u8		path_name[ACPI_PATHNAME_MAX];
-	struct acpi_buffer	ret_buf = { ACPI_PATHNAME_MAX, path_name };
-
-	memset(path_name, 0, sizeof (path_name));
-	status = acpi_get_name(handle, ACPI_FULL_PATHNAME, &ret_buf);
-
-	if (ACPI_FAILURE(status))
-		return NULL;
-	else
-		return path_name;	
-}
-
-static acpi_status
-acpi_run_hpp(acpi_handle handle, struct hotplug_params *hpp)
-{
-	acpi_status		status;
-	u8			nui[4];
-	struct acpi_buffer	ret_buf = { 0, NULL};
-	union acpi_object	*ext_obj, *package;
-	u8			*path_name = acpi_path_name(handle);
-	int			i, len = 0;
-
-	/* get _hpp */
-	status = acpi_evaluate_object(handle, METHOD_NAME__HPP, NULL, &ret_buf);
-	switch (status) {
-	case AE_BUFFER_OVERFLOW:
-		ret_buf.pointer = kmalloc (ret_buf.length, GFP_KERNEL);
-		if (!ret_buf.pointer) {
-			err ("%s:%s alloc for _HPP fail\n", __FUNCTION__,
-					path_name);
-			return AE_NO_MEMORY;
-		}
-		status = acpi_evaluate_object(handle, METHOD_NAME__HPP,
-				NULL, &ret_buf);
-		if (ACPI_SUCCESS(status))
-			break;
-	default:
-		if (ACPI_FAILURE(status)) {
-			dbg("%s:%s _HPP fail=0x%x\n", __FUNCTION__,
-					path_name, status);
-			return status;
-		}
-	}
-
-	ext_obj = (union acpi_object *) ret_buf.pointer;
-	if (ext_obj->type != ACPI_TYPE_PACKAGE) {
-		err ("%s:%s _HPP obj not a package\n", __FUNCTION__,
-				path_name);
-		status = AE_ERROR;
-		goto free_and_return;
-	}
-
-	len = ext_obj->package.count;
-	package = (union acpi_object *) ret_buf.pointer;
-	for ( i = 0; (i < len) || (i < 4); i++) {
-		ext_obj = (union acpi_object *) &package->package.elements[i];
-		switch (ext_obj->type) {
-		case ACPI_TYPE_INTEGER:
-			nui[i] = (u8)ext_obj->integer.value;
-			break;
-		default:
-			err ("%s:%s _HPP obj type incorrect\n", __FUNCTION__,
-					path_name);
-			status = AE_ERROR;
-			goto free_and_return;
-		}
-	}
-
-	hpp->cache_line_size = nui[0];
-	hpp->latency_timer = nui[1];
-	hpp->enable_serr = nui[2];
-	hpp->enable_perr = nui[3];
-
-	dbg("  _HPP: cache_line_size=0x%x\n", hpp->cache_line_size);
-	dbg("  _HPP: latency timer  =0x%x\n", hpp->latency_timer);
-	dbg("  _HPP: enable SERR    =0x%x\n", hpp->enable_serr);
-	dbg("  _HPP: enable PERR    =0x%x\n", hpp->enable_perr);
-
-free_and_return:
-	kfree(ret_buf.pointer);
-	return status;
-}
-
-static acpi_status acpi_run_oshp(acpi_handle handle)
-{
-	acpi_status		status;
-	u8			*path_name = acpi_path_name(handle);
-
-	/* run OSHP */
-	status = acpi_evaluate_object(handle, METHOD_NAME_OSHP, NULL, NULL);
-	if (ACPI_FAILURE(status)) {
-		dbg("%s:%s OSHP fails=0x%x\n", __FUNCTION__, path_name,
-				status);
-	} else {
-		dbg("%s:%s OSHP passes\n", __FUNCTION__, path_name);
-	}
-	return status;
-}
-
-static int is_root_bridge(acpi_handle handle)
-{
-	acpi_status status;
-	struct acpi_device_info *info;
-	struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
-	int i;
-
-	status = acpi_get_object_info(handle, &buffer);
-	if (ACPI_SUCCESS(status)) {
-		info = buffer.pointer;
-		if ((info->valid & ACPI_VALID_HID) &&
-			!strcmp(PCI_ROOT_HID_STRING,
-					info->hardware_id.value)) {
-			acpi_os_free(buffer.pointer);
-			return 1;
-		}
-		if (info->valid & ACPI_VALID_CID) {
-			for (i=0; i < info->compatibility_id.count; i++) {
-				if (!strcmp(PCI_ROOT_HID_STRING,
-					info->compatibility_id.id[i].value)) {
-					acpi_os_free(buffer.pointer);
-					return 1;
-				}
-			}
-		}
-	}
-	return 0;
-}
-
-int pciehp_get_hp_hw_control_from_firmware(struct pci_dev *dev)
-{
-	acpi_status status;
-	acpi_handle chandle, handle = DEVICE_ACPI_HANDLE(&(dev->dev));
-	struct pci_dev *pdev = dev;
-	struct pci_bus *parent;
-	u8 *path_name;
-
-	/*
-	 * Per PCI firmware specification, we should run the ACPI _OSC
-	 * method to get control of hotplug hardware before using it.
-	 * If an _OSC is missing, we look for an OSHP to do the same thing.
-	 * To handle different BIOS behavior, we look for _OSC and OSHP
-	 * within the scope of the hotplug controller and its parents, upto
-	 * the host bridge under which this controller exists.
-	 */
-	while (!handle) {
-		/*
-		 * This hotplug controller was not listed in the ACPI name
-		 * space at all. Try to get acpi handle of parent pci bus.
-		 */
-		if (!pdev || !pdev->bus->parent)
-			break;
-		parent = pdev->bus->parent;
-		dbg("Could not find %s in acpi namespace, trying parent\n",
-				pci_name(pdev));
-		if (!parent->self)
-			/* Parent must be a host bridge */
-			handle = acpi_get_pci_rootbridge_handle(
-					pci_domain_nr(parent),
-					parent->number);
-		else
-			handle = DEVICE_ACPI_HANDLE(
-					&(parent->self->dev));
-		pdev = parent->self;
-	}
-
-	while (handle) {
-		path_name = acpi_path_name(handle);
-		dbg("Trying to get hotplug control for %s \n", path_name);
-		status = pci_osc_control_set(handle,
-				OSC_PCI_EXPRESS_NATIVE_HP_CONTROL);
-		if (status == AE_NOT_FOUND)
-			status = acpi_run_oshp(handle);
-		if (ACPI_SUCCESS(status)) {
-			dbg("Gained control for hotplug HW for pci %s (%s)\n",
-				pci_name(dev), path_name);
-			return 0;
-		}
-		if (is_root_bridge(handle))
-			break;
-		chandle = handle;
-		status = acpi_get_parent(chandle, &handle);
-		if (ACPI_FAILURE(status))
-			break;
-	}
-
-	err("Cannot get control of hotplug hardware for pci %s\n",
-			pci_name(dev));
-	return -1;
-}
-
-void pciehp_get_hp_params_from_firmware(struct pci_dev *dev,
-		struct hotplug_params *hpp)
-{
-	acpi_status status = AE_NOT_FOUND;
-	struct pci_dev *pdev = dev;
-
-	/*
-	 * _HPP settings apply to all child buses, until another _HPP is
-	 * encountered. If we don't find an _HPP for the input pci dev,
-	 * look for it in the parent device scope since that would apply to
-	 * this pci dev. If we don't find any _HPP, use hardcoded defaults
-	 */
-	while (pdev && (ACPI_FAILURE(status))) {
-		acpi_handle handle = DEVICE_ACPI_HANDLE(&(pdev->dev));
-		if (!handle)
-			break;
-		status = acpi_run_hpp(handle, hpp);
-		if (!(pdev->bus->parent))
-			break;
-		/* Check if a parent object supports _HPP */
-		pdev = pdev->bus->parent->self;
-	}
-}
-
drivers/pci/hotplug/pciehprm_nonacpi.c deleted +0 -47
@@ -1,47 +0,0 @@
-/*
- * PCIEHPRM NONACPI: PHP Resource Manager for Non-ACPI/Legacy platform
- *
- * Copyright (C) 1995,2001 Compaq Computer Corporation
- * Copyright (C) 2001 Greg Kroah-Hartman ([email protected])
- * Copyright (C) 2001 IBM Corp.
- * Copyright (C) 2003-2004 Intel Corporation
- *
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT.  See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Send feedback to <[email protected]>, <[email protected]>
- *
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/sched.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include "pciehp.h"
-
-void pciehp_get_hp_params_from_firmware(struct pci_dev *dev,
-		struct hotplug_params *hpp)
-{
-	return;
-}
-
-int pciehp_get_hp_hw_control_from_firmware(struct pci_dev *dev)
-{
-	return 0;
-}
drivers/pci/hotplug/shpchp.h +14 -11
@@ -106,12 +106,6 @@ struct controller {
 	volatile int cmd_busy;
 };
 
-struct hotplug_params {
-	u8	cache_line_size;
-	u8	latency_timer;
-	u8	enable_serr;
-	u8	enable_perr;
-};
 
 /* Define AMD SHPC ID  */
 #define PCI_DEVICE_ID_AMD_GOLAM_7450	0x7450 
@@ -193,15 +187,24 @@ extern u8	shpchp_handle_power_fault(u8 h
 extern int	shpchp_save_config(struct controller *ctrl, int busnumber, int num_ctlr_slots, int first_device_num);
 extern int	shpchp_configure_device(struct slot *p_slot);
 extern int	shpchp_unconfigure_device(struct slot *p_slot);
-extern void	get_hp_hw_control_from_firmware(struct pci_dev *dev);
-extern void	get_hp_params_from_firmware(struct pci_dev *dev,
-		struct hotplug_params *hpp);
-extern int	shpchprm_get_physical_slot_number(struct controller *ctrl,
-		u32 *sun, u8 busnum, u8 devnum);
 extern void	shpchp_remove_ctrl_files(struct controller *ctrl);
 extern void	cleanup_slots(struct controller *ctrl);
 extern void	queue_pushbutton_work(void *data);
 
+
+#ifdef CONFIG_ACPI
+#define get_hp_params_from_firmware(dev, hpp) \
+	acpi_get_hp_params_from_firmware(dev, hpp)
+#define get_hp_hw_control_from_firmware(pdev) \
+	do { \
+		if (DEVICE_ACPI_HANDLE(&(pdev->dev))) \
+			acpi_run_oshp(DEVICE_ACPI_HANDLE(&(pdev->dev))); \
+	} while (0)
+#else
+#define get_hp_params_from_firmware(dev, hpp)
+#define get_hp_hw_control_from_firmware(dev)
+#endif
+
 struct ctrl_reg {
 	volatile u32 base_offset;
 	volatile u32 slot_avail1;
drivers/pci/hotplug/shpchp_core.c +17 -0
@@ -104,6 +104,23 @@ static void make_slot_name(struct slot *
 		 slot->bus, slot->number);
 }
 
+
+
+
+static int
+shpchprm_get_physical_slot_number(struct controller *ctrl, u32 *sun,
+				u8 busnum, u8 devnum)
+{
+	int offset = devnum - ctrl->slot_device_offset;
+
+	dbg("%s: ctrl->slot_num_inc %d, offset %d\n", __FUNCTION__,
+			ctrl->slot_num_inc, offset);
+	*sun = (u8) (ctrl->first_slot + ctrl->slot_num_inc *offset);
+	return 0;
+}
+
+
+
 static int init_slots(struct controller *ctrl)
 {
 	struct slot *slot;
drivers/pci/hotplug/shpchprm_acpi.c deleted +0 -186
@@ -1,186 +0,0 @@
-/*
- * SHPCHPRM ACPI: PHP Resource Manager for ACPI platform
- *
- * Copyright (C) 2003-2004 Intel Corporation
- *
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT.  See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Send feedback to <[email protected]>
- *
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <acpi/acpi.h>
-#include <acpi/acpi_bus.h>
-#include <acpi/actypes.h>
-#include "shpchp.h"
-
-#define	METHOD_NAME__SUN	"_SUN"
-#define	METHOD_NAME__HPP	"_HPP"
-#define	METHOD_NAME_OSHP	"OSHP"
-
-static u8 * acpi_path_name( acpi_handle	handle)
-{
-	acpi_status		status;
-	static u8	path_name[ACPI_PATHNAME_MAX];
-	struct acpi_buffer		ret_buf = { ACPI_PATHNAME_MAX, path_name };
-
-	memset(path_name, 0, sizeof (path_name));
-	status = acpi_get_name(handle, ACPI_FULL_PATHNAME, &ret_buf);
-
-	if (ACPI_FAILURE(status))
-		return NULL;
-	else
-		return path_name;	
-}
-
-static acpi_status
-acpi_run_hpp(acpi_handle handle, struct hotplug_params *hpp)
-{
-	acpi_status		status;
-	u8			nui[4];
-	struct acpi_buffer	ret_buf = { 0, NULL};
-	union acpi_object	*ext_obj, *package;
-	u8			*path_name = acpi_path_name(handle);
-	int			i, len = 0;
-
-	/* get _hpp */
-	status = acpi_evaluate_object(handle, METHOD_NAME__HPP, NULL, &ret_buf);
-	switch (status) {
-	case AE_BUFFER_OVERFLOW:
-		ret_buf.pointer = kmalloc (ret_buf.length, GFP_KERNEL);
-		if (!ret_buf.pointer) {
-			err ("%s:%s alloc for _HPP fail\n", __FUNCTION__,
-					path_name);
-			return AE_NO_MEMORY;
-		}
-		status = acpi_evaluate_object(handle, METHOD_NAME__HPP,
-				NULL, &ret_buf);
-		if (ACPI_SUCCESS(status))
-			break;
-	default:
-		if (ACPI_FAILURE(status)) {
-			dbg("%s:%s _HPP fail=0x%x\n", __FUNCTION__,
-					path_name, status);
-			return status;
-		}
-	}
-
-	ext_obj = (union acpi_object *) ret_buf.pointer;
-	if (ext_obj->type != ACPI_TYPE_PACKAGE) {
-		err ("%s:%s _HPP obj not a package\n", __FUNCTION__,
-				path_name);
-		status = AE_ERROR;
-		goto free_and_return;
-	}
-
-	len = ext_obj->package.count;
-	package = (union acpi_object *) ret_buf.pointer;
-	for ( i = 0; (i < len) || (i < 4); i++) {
-		ext_obj = (union acpi_object *) &package->package.elements[i];
-		switch (ext_obj->type) {
-		case ACPI_TYPE_INTEGER:
-			nui[i] = (u8)ext_obj->integer.value;
-			break;
-		default:
-			err ("%s:%s _HPP obj type incorrect\n", __FUNCTION__,
-					path_name);
-			status = AE_ERROR;
-			goto free_and_return;
-		}
-	}
-
-	hpp->cache_line_size = nui[0];
-	hpp->latency_timer = nui[1];
-	hpp->enable_serr = nui[2];
-	hpp->enable_perr = nui[3];
-
-	dbg("  _HPP: cache_line_size=0x%x\n", hpp->cache_line_size);
-	dbg("  _HPP: latency timer  =0x%x\n", hpp->latency_timer);
-	dbg("  _HPP: enable SERR    =0x%x\n", hpp->enable_serr);
-	dbg("  _HPP: enable PERR    =0x%x\n", hpp->enable_perr);
-
-free_and_return:
-	kfree(ret_buf.pointer);
-	return status;
-}
-
-static void acpi_run_oshp(acpi_handle handle)
-{
-	acpi_status		status;
-	u8			*path_name = acpi_path_name(handle);
-
-	/* run OSHP */
-	status = acpi_evaluate_object(handle, METHOD_NAME_OSHP, NULL, NULL);
-	if (ACPI_FAILURE(status)) {
-		err("%s:%s OSHP fails=0x%x\n", __FUNCTION__, path_name,
-				status);
-	} else {
-		dbg("%s:%s OSHP passes\n", __FUNCTION__, path_name);
-	}
-}
-
-int shpchprm_get_physical_slot_number(struct controller *ctrl, u32 *sun, u8 busnum, u8 devnum)
-{
-	int offset = devnum - ctrl->slot_device_offset;
-
-	dbg("%s: ctrl->slot_num_inc %d, offset %d\n", __FUNCTION__, ctrl->slot_num_inc, offset);
-	*sun = (u8) (ctrl->first_slot + ctrl->slot_num_inc *offset);
-	return 0;
-}
-
-void get_hp_hw_control_from_firmware(struct pci_dev *dev)
-{
-	/*
-	 * OSHP is an optional ACPI firmware control method. If present,
-	 * we need to run it to inform BIOS that we will control SHPC
-	 * hardware from now on.
-	 */
-	acpi_handle handle = DEVICE_ACPI_HANDLE(&(dev->dev));
-	if (!handle)
-		return;
-	acpi_run_oshp(handle);
-}
-
-void get_hp_params_from_firmware(struct pci_dev *dev,
-		struct hotplug_params *hpp)
-{
-	acpi_status status = AE_NOT_FOUND;
-	struct pci_dev *pdev = dev;
-
-	/*
-	 * _HPP settings apply to all child buses, until another _HPP is
-	 * encountered. If we don't find an _HPP for the input pci dev,
-	 * look for it in the parent device scope since that would apply to
-	 * this pci dev. If we don't find any _HPP, use hardcoded defaults
-	 */
-	while (pdev && (ACPI_FAILURE(status))) {
-		acpi_handle handle = DEVICE_ACPI_HANDLE(&(pdev->dev));
-		if (!handle)
-			break;
-		status = acpi_run_hpp(handle, hpp);
-		if (!(pdev->bus->parent))
-			break;
-		/* Check if a parent object supports _HPP */
-		pdev = pdev->bus->parent->self;
-	}
-}
-
drivers/pci/hotplug/shpchprm_legacy.c deleted +0 -54
@@ -1,54 +0,0 @@
-/*
- * SHPCHPRM Legacy: PHP Resource Manager for Non-ACPI/Legacy platform
- *
- * Copyright (C) 1995,2001 Compaq Computer Corporation
- * Copyright (C) 2001 Greg Kroah-Hartman ([email protected])
- * Copyright (C) 2001 IBM Corp.
- * Copyright (C) 2003-2004 Intel Corporation
- *
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT.  See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Send feedback to <[email protected]>,<[email protected]>
- *
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include "shpchp.h"
-
-int shpchprm_get_physical_slot_number(struct controller *ctrl, u32 *sun, u8 busnum, u8 devnum)
-{
-	int	offset = devnum - ctrl->slot_device_offset;
-
-	*sun = (u8) (ctrl->first_slot + ctrl->slot_num_inc * offset);
-	return 0;
-}
-
-void get_hp_params_from_firmware(struct pci_dev *dev,
-		struct hotplug_params *hpp)
-{
-	return;
-}
-
-void get_hp_hw_control_from_firmware(struct pci_dev *dev)
-{
-	return;
-}
-
drivers/pci/hotplug/shpchprm_nonacpi.c deleted +0 -58
@@ -1,57 +0,0 @@
-/*
- * SHPCHPRM NONACPI: PHP Resource Manager for Non-ACPI/Legacy platform
- *
- * Copyright (C) 1995,2001 Compaq Computer Corporation
- * Copyright (C) 2001 Greg Kroah-Hartman ([email protected])
- * Copyright (C) 2001 IBM Corp.
- * Copyright (C) 2003-2004 Intel Corporation
- *
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT.  See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Send feedback to <[email protected]>, <[email protected]>
- *
- */
-
-#include <linux/config.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-
-#include "shpchp.h"
-
-int shpchprm_get_physical_slot_number(struct controller *ctrl, u32 *sun, u8 busnum, u8 devnum)
-{
-	int	offset = devnum - ctrl->slot_device_offset;
-
-	dbg("%s: ctrl->slot_num_inc %d, offset %d\n", __FUNCTION__, ctrl->slot_num_inc, offset);
-	*sun = (u8) (ctrl->first_slot + ctrl->slot_num_inc * offset);
-	return 0;
-}
-
-void get_hp_params_from_firmware(struct pci_dev *dev,
-		struct hotplug_params *hpp)
-{
-	return;
-}
-
-void get_hp_hw_control_from_firmware(struct pci_dev *dev)
-{
-	return;
-}
 
 
 
-------------------------------------------------------

This SF.Net email is sponsored by xPML, a groundbreaking scripting language that extends applications into web and mobile media. Attend the live webcast and join the prime developer group breaking into this new coding territory!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642
_______________________________________________
Pcihpd-discuss mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/pcihpd-discuss

#4 lore raw
Quoted 41 lines · Kenji Kaneshige

Hi Kristen,

This looks very nice to me!

Here is one comment.

Quoted 19 lines
drivers/pci/hotplug/acpi_pcihp.c new file +19 -0
+int is_root_bridge(acpi_handle handle)
+{
+	acpi_status status;
+	struct acpi_device_info *info;
+	struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
+	int i;
+
+	status = acpi_get_object_info(handle, &buffer);
+	if (ACPI_SUCCESS(status)) {
+		info = buffer.pointer;
+		if ((info->valid & ACPI_VALID_HID) &&
+			!strcmp(PCI_ROOT_HID_STRING,
+					info->hardware_id.value)) {
+			acpi_os_free(buffer.pointer);
+			return 1;
+		}
+		if (info->valid & ACPI_VALID_CID) {
+			for (i=0; i < info->compatibility_id.count; i++) {
+				if (!strcmp(PCI_ROOT_HID_STRING,

drivers/pci/hotplug/acpi_pcihp.c line 201

Quoted 10 lines
drivers/pci/hotplug/acpi_pcihp.c new file +10 -0
+					info->compatibility_id.id[i].value)) {
+					acpi_os_free(buffer.pointer);
+					return 1;
+				}
+			}
+		}
+	}
+	return 0;
+}
+EXPORT_SYMBOL_GPL(is_root_bridge);

I think this seems to leak memory (buffer.pointer), though I guess you just copy and paste from the original code. I think we need to free buffer.pointer whenever acpi_get_object_info() returns as success.

Quoted 2 lines

Thanks,
Kenji Kaneshige

Ah hah, you are right. Yes, I did just cut and paste the original code
- and this just makes me happy I'm doing this because this bug is currently duplicated in 2 drivers since they all cut and pasted the same buggy code. Soon we will just share the same 1 piece of buggy code.

#5 lore raw
In reply to Kristen Accardi

Hi Kristen,

Here is one more comment.

Quoted 14 lines
drivers/pci/hotplug/acpi_pcihp.c new file +14 -0
+void acpi_get_hp_params_from_firmware(struct pci_dev *dev,
+		struct hotplug_params *hpp)
+{
+	acpi_status status = AE_NOT_FOUND;
+	struct pci_dev *pdev = dev;
+
+	/*
+	 * _HPP settings apply to all child buses, until another _HPP is
+	 * encountered. If we don't find an _HPP for the input pci dev,
+	 * look for it in the parent device scope since that would apply to
+	 * this pci dev. If we don't find any _HPP, use hardcoded defaults
+	 */
+	while (pdev && (ACPI_FAILURE(status))) {
+		acpi_handle handle = DEVICE_ACPI_HANDLE(&(pdev->dev));

drivers/pci/hotplug/acpi_pcihp.c line 169

Quoted 10 lines
drivers/pci/hotplug/acpi_pcihp.c new file +10 -0
+		if (!handle)
+			break;
+		status = acpi_run_hpp(handle, hpp);
+		if (!(pdev->bus->parent))
+			break;
+		/* Check if a parent object supports _HPP */
+		pdev = pdev->bus->parent->self;
+	}
+}
+EXPORT_SYMBOL_GPL(acpi_get_hp_params_from_firmware);

I think the acpi_get_hp_params_from_firmware() function assumes that users set default hpp parameters into *hpp before calling this function. I think it is very hard for new users of the function to notice it, so I think this assumption should be removed.

Thanks,
Kenji Kaneshige

Quoted 1,155 lines · Kristen Accardi

shpchprm_acpi.c and pciehprm_acpi.c are nearly identical.
In addition, there are functions in both these files that
are also in acpiphp_glue.c. This patch will remove duplicate functions from shpchp, pciehp, and acpiphp and move this functionality to pci_hotplug, as it is not hardware specific. Get rid of shpchprm* and pciehprm* files since they are no longer needed. shpchprm_nonacpi.c and pciehprm_nonacpi.c are identical, as well as shpchprm_legacy.c and can be replaced with a macro.

---

 dev/null                               |binary
 dev/null                               |binary
 drivers/pci/hotplug/pciehprm_acpi.c    |  257 ---------------------------------
 drivers/pci/hotplug/pciehprm_nonacpi.c |   47 ------
 drivers/pci/hotplug/shpchprm_acpi.c    |  186 -----------------------
 drivers/pci/hotplug/shpchprm_legacy.c  |   54 ------
 drivers/pci/hotplug/shpchprm_nonacpi.c |   57 -------
 drivers/pci/hotplug/Makefile           |   17 --
 drivers/pci/hotplug/acpi_pcihp.c       |  201 +++++++++++++++++++++++++
 drivers/pci/hotplug/acpiphp_glue.c     |   28 ---
 drivers/pci/hotplug/pci_hotplug.h      |   17 ++
 drivers/pci/hotplug/pciehp.h           |   19 +-
 drivers/pci/hotplug/pciehp_hpc.c       |   69 ++++++++
 drivers/pci/hotplug/shpchp.h           |   25 +--
 drivers/pci/hotplug/shpchp_core.c      |   17 ++
 13 files changed, 331 insertions(+), 663 deletions(-)
drivers/pci/hotplug/Makefile +3 -14
@@ -22,6 +22,9 @@ ifdef CONFIG_HOTPLUG_PCI_CPCI
 pci_hotplug-objs	+=	cpci_hotplug_core.o	\
 				cpci_hotplug_pci.o
 endif
+ifdef CONFIG_ACPI
+pci_hotplug-objs 	+= 	acpi_pcihp.o
+endif
 
 cpqphp-objs		:=	cpqphp_core.o	\
 				cpqphp_ctrl.o	\
@@ -51,23 +54,9 @@ pciehp-objs		:=	pciehp_core.o	\
 				pciehp_ctrl.o	\
 				pciehp_pci.o	\
 				pciehp_hpc.o
-ifdef CONFIG_ACPI
-	pciehp-objs += pciehprm_acpi.o
-else
-	pciehp-objs += pciehprm_nonacpi.o
-endif
 
 shpchp-objs		:=	shpchp_core.o	\
 				shpchp_ctrl.o	\
 				shpchp_pci.o	\
 				shpchp_sysfs.o	\
 				shpchp_hpc.o
-ifdef CONFIG_ACPI
-	shpchp-objs += shpchprm_acpi.o
-else
-	ifdef CONFIG_HOTPLUG_PCI_SHPC_PHPRM_LEGACY
-		shpchp-objs += shpchprm_legacy.o
-	else
-		shpchp-objs += shpchprm_nonacpi.o
-	endif
-endif
drivers/pci/hotplug/acpi_pcihp.c new file +201 -0
@@ -0,0 +1,201 @@
+/*
+ * ACPI related functions for PCI hotplug drivers
+ *
+ * Copyright (C) 2006 Intel Corporation
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Send feedback to <[email protected]>
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <acpi/acpi.h>
+#include <acpi/acpi_bus.h>
+#include <acpi/actypes.h>
+#include "pci_hotplug.h"
+
+#define	METHOD_NAME__SUN	"_SUN"
+#define	METHOD_NAME__HPP	"_HPP"
+#define	METHOD_NAME_OSHP	"OSHP"
+
+u8 * acpi_path_name( acpi_handle	handle)
+{
+	acpi_status		status;
+	static u8	path_name[ACPI_PATHNAME_MAX];
+	struct acpi_buffer		ret_buf = { ACPI_PATHNAME_MAX, path_name };
+
+	memset(path_name, 0, sizeof (path_name));
+	status = acpi_get_name(handle, ACPI_FULL_PATHNAME, &ret_buf);
+
+	if (ACPI_FAILURE(status))
+		return NULL;
+	else
+		return path_name;
+}
+EXPORT_SYMBOL_GPL(acpi_path_name);
+
+static acpi_status
+acpi_run_hpp(acpi_handle handle, struct hotplug_params *hpp)
+{
+	acpi_status		status;
+	u8			nui[4];
+	struct acpi_buffer	ret_buf = { 0, NULL};
+	union acpi_object	*ext_obj, *package;
+	u8			*path_name = acpi_path_name(handle);
+	int			i, len = 0;
+
+	/* get _hpp */
+	status = acpi_evaluate_object(handle, METHOD_NAME__HPP, NULL, &ret_buf);
+	switch (status) {
+	case AE_BUFFER_OVERFLOW:
+		ret_buf.pointer = kmalloc (ret_buf.length, GFP_KERNEL);
+		if (!ret_buf.pointer) {
+			printk(KERN_ERR "%s:%s alloc for _HPP fail\n",
+				__FUNCTION__, path_name);
+			return AE_NO_MEMORY;
+		}
+		status = acpi_evaluate_object(handle, METHOD_NAME__HPP,
+				NULL, &ret_buf);
+		if (ACPI_SUCCESS(status))
+			break;
+	default:
+		if (ACPI_FAILURE(status)) {
+			pr_debug("%s:%s _HPP fail=0x%x\n", __FUNCTION__,
+					path_name, status);
+			return status;
+		}
+	}
+
+	ext_obj = (union acpi_object *) ret_buf.pointer;
+	if (ext_obj->type != ACPI_TYPE_PACKAGE) {
+		printk(KERN_ERR "%s:%s _HPP obj not a package\n", __FUNCTION__,
+				path_name);
+		status = AE_ERROR;
+		goto free_and_return;
+	}
+
+	len = ext_obj->package.count;
+	package = (union acpi_object *) ret_buf.pointer;
+	for ( i = 0; (i < len) || (i < 4); i++) {
+		ext_obj = (union acpi_object *) &package->package.elements[i];
+		switch (ext_obj->type) {
+		case ACPI_TYPE_INTEGER:
+			nui[i] = (u8)ext_obj->integer.value;
+			break;
+		default:
+			printk(KERN_ERR "%s:%s _HPP obj type incorrect\n",
+				__FUNCTION__, path_name);
+			status = AE_ERROR;
+			goto free_and_return;
+		}
+	}
+
+	hpp->cache_line_size = nui[0];
+	hpp->latency_timer = nui[1];
+	hpp->enable_serr = nui[2];
+	hpp->enable_perr = nui[3];
+
+	pr_debug("  _HPP: cache_line_size=0x%x\n", hpp->cache_line_size);
+	pr_debug("  _HPP: latency timer  =0x%x\n", hpp->latency_timer);
+	pr_debug("  _HPP: enable SERR    =0x%x\n", hpp->enable_serr);
+	pr_debug("  _HPP: enable PERR    =0x%x\n", hpp->enable_perr);
+
+free_and_return:
+	kfree(ret_buf.pointer);
+	return status;
+}
+
+acpi_status acpi_run_oshp(acpi_handle handle)
+{
+	acpi_status		status;
+	u8			*path_name = acpi_path_name(handle);
+
+	/* run OSHP */
+	status = acpi_evaluate_object(handle, METHOD_NAME_OSHP, NULL, NULL);
+	if (ACPI_FAILURE(status)) {
+		printk(KERN_ERR "%s:%s OSHP fails=0x%x\n", __FUNCTION__,
+			path_name, status);
+	} else {
+		pr_debug("%s:%s OSHP passes\n", __FUNCTION__, path_name);
+	}
+	return status;
+}
+EXPORT_SYMBOL_GPL(acpi_run_oshp);
+
+
+
+void acpi_get_hp_params_from_firmware(struct pci_dev *dev,
+		struct hotplug_params *hpp)
+{
+	acpi_status status = AE_NOT_FOUND;
+	struct pci_dev *pdev = dev;
+
+	/*
+	 * _HPP settings apply to all child buses, until another _HPP is
+	 * encountered. If we don't find an _HPP for the input pci dev,
+	 * look for it in the parent device scope since that would apply to
+	 * this pci dev. If we don't find any _HPP, use hardcoded defaults
+	 */
+	while (pdev && (ACPI_FAILURE(status))) {
+		acpi_handle handle = DEVICE_ACPI_HANDLE(&(pdev->dev));
+		if (!handle)
+			break;
+		status = acpi_run_hpp(handle, hpp);
+		if (!(pdev->bus->parent))
+			break;
+		/* Check if a parent object supports _HPP */
+		pdev = pdev->bus->parent->self;
+	}
+}
+EXPORT_SYMBOL_GPL(acpi_get_hp_params_from_firmware);
+
+
+
+int is_root_bridge(acpi_handle handle)
+{
+	acpi_status status;
+	struct acpi_device_info *info;
+	struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
+	int i;
+
+	status = acpi_get_object_info(handle, &buffer);
+	if (ACPI_SUCCESS(status)) {
+		info = buffer.pointer;
+		if ((info->valid & ACPI_VALID_HID) &&
+			!strcmp(PCI_ROOT_HID_STRING,
+					info->hardware_id.value)) {
+			acpi_os_free(buffer.pointer);
+			return 1;
+		}
+		if (info->valid & ACPI_VALID_CID) {
+			for (i=0; i < info->compatibility_id.count; i++) {
+				if (!strcmp(PCI_ROOT_HID_STRING,
+					info->compatibility_id.id[i].value)) {
+					acpi_os_free(buffer.pointer);
+					return 1;
+				}
+			}
+		}
+	}
+	return 0;
+}
+EXPORT_SYMBOL_GPL(is_root_bridge);
drivers/pci/hotplug/acpiphp_glue.c +0 -28
@@ -1408,34 +1408,6 @@ void handle_hotplug_event_func(acpi_hand
 	}
 }
 
-static int is_root_bridge(acpi_handle handle)
-{
-	acpi_status status;
-	struct acpi_device_info *info;
-	struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
-	int i;
-
-	status = acpi_get_object_info(handle, &buffer);
-	if (ACPI_SUCCESS(status)) {
-		info = buffer.pointer;
-		if ((info->valid & ACPI_VALID_HID) &&
-			!strcmp(PCI_ROOT_HID_STRING,
-					info->hardware_id.value)) {
-			acpi_os_free(buffer.pointer);
-			return 1;
-		}
-		if (info->valid & ACPI_VALID_CID) {
-			for (i=0; i < info->compatibility_id.count; i++) {
-				if (!strcmp(PCI_ROOT_HID_STRING,
-					info->compatibility_id.id[i].value)) {
-					acpi_os_free(buffer.pointer);
-					return 1;
-				}
-			}
-		}
-	}
-	return 0;
-}
 
 static acpi_status
 find_root_bridges(acpi_handle handle, u32 lvl, void *context, void **rv)
drivers/pci/hotplug/pci_hotplug.h +17 -0
@@ -176,5 +176,22 @@ extern int pci_hp_change_slot_info	(stru
 					 struct hotplug_slot_info *info);
 extern struct subsystem pci_hotplug_slots_subsys;
 
+struct hotplug_params {
+	u8 cache_line_size;
+	u8 latency_timer;
+	u8 enable_serr;
+	u8 enable_perr;
+};
+
+#ifdef CONFIG_ACPI
+#include <acpi/acpi.h>
+#include <acpi/acpi_bus.h>
+#include <acpi/actypes.h>
+extern acpi_status acpi_run_oshp(acpi_handle handle);
+extern void acpi_get_hp_params_from_firmware(struct pci_dev *dev,
+		struct hotplug_params *hpp);
+extern u8 * acpi_path_name( acpi_handle	handle);
+int is_root_bridge(acpi_handle handle);
+#endif
 #endif
 
drivers/pci/hotplug/pciehp.h +10 -9
@@ -50,12 +50,6 @@ extern int pciehp_force;
 #define info(format, arg...) printk(KERN_INFO "%s: " format, MY_NAME , ## arg)
 #define warn(format, arg...) printk(KERN_WARNING "%s: " format, MY_NAME , ## arg)
 
-struct hotplug_params {
-	u8 cache_line_size;
-	u8 latency_timer;
-	u8 enable_serr;
-	u8 enable_perr;
-};
 
 struct slot {
 	struct slot *next;
@@ -192,9 +186,6 @@ extern u8	pciehp_handle_power_fault	(u8 
 /* pci functions */
 extern int	pciehp_configure_device		(struct slot *p_slot);
 extern int	pciehp_unconfigure_device	(struct slot *p_slot);
-extern int	pciehp_get_hp_hw_control_from_firmware(struct pci_dev *dev);
-extern void	pciehp_get_hp_params_from_firmware(struct pci_dev *dev,
-	       	struct hotplug_params *hpp);
 
 
 
@@ -286,4 +277,14 @@ struct hpc_ops {
 	int	(*check_lnk_status)	(struct controller *ctrl);
 };
 
+
+#ifdef CONFIG_ACPI
+#define pciehp_get_hp_hw_control_from_firmware(dev) \
+	pciehp_acpi_get_hp_hw_control_from_firmware(dev)
+#define pciehp_get_hp_params_from_firmware(dev, hpp) \
+	acpi_get_hp_params_from_firmware(dev, hpp)
+#else
+#define pciehp_get_hp_hw_control_from_firmware(dev) 	0
+#define acpi_get_hp_params_from_firmware(dev, hpp)
+#endif 				/* CONFIG_ACPI */
 #endif				/* _PCIEHP_H */
drivers/pci/hotplug/pciehp_hpc.c +69 -0
@@ -38,6 +38,9 @@
 
 #include "../pci.h"
 #include "pciehp.h"
+#ifdef CONFIG_ACPI
+#include <linux/pci-acpi.h>
+#endif
 
 #ifdef DEBUG
 #define DBG_K_TRACE_ENTRY      ((unsigned int)0x00000001)	/* On function entry */
@@ -1236,6 +1239,72 @@ static struct hpc_ops pciehp_hpc_ops = {
 	.check_lnk_status		= hpc_check_lnk_status,
 };
 
+#ifdef CONFIG_ACPI
+int pciehp_acpi_get_hp_hw_control_from_firmware(struct pci_dev *dev)
+{
+	acpi_status status;
+	acpi_handle chandle, handle = DEVICE_ACPI_HANDLE(&(dev->dev));
+	struct pci_dev *pdev = dev;
+	struct pci_bus *parent;
+	u8 *path_name;
+
+	/*
+	 * Per PCI firmware specification, we should run the ACPI _OSC
+	 * method to get control of hotplug hardware before using it.
+	 * If an _OSC is missing, we look for an OSHP to do the same thing.
+	 * To handle different BIOS behavior, we look for _OSC and OSHP
+	 * within the scope of the hotplug controller and its parents, upto
+	 * the host bridge under which this controller exists.
+	 */
+	while (!handle) {
+		/*
+		 * This hotplug controller was not listed in the ACPI name
+		 * space at all. Try to get acpi handle of parent pci bus.
+		 */
+		if (!pdev || !pdev->bus->parent)
+			break;
+		parent = pdev->bus->parent;
+		dbg("Could not find %s in acpi namespace, trying parent\n",
+				pci_name(pdev));
+		if (!parent->self)
+			/* Parent must be a host bridge */
+			handle = acpi_get_pci_rootbridge_handle(
+					pci_domain_nr(parent),
+					parent->number);
+		else
+			handle = DEVICE_ACPI_HANDLE(
+					&(parent->self->dev));
+		pdev = parent->self;
+	}
+
+	while (handle) {
+		path_name = acpi_path_name(handle);
+		dbg("Trying to get hotplug control for %s \n", path_name);
+		status = pci_osc_control_set(handle,
+				OSC_PCI_EXPRESS_NATIVE_HP_CONTROL);
+		if (status == AE_NOT_FOUND)
+			status = acpi_run_oshp(handle);
+		if (ACPI_SUCCESS(status)) {
+			dbg("Gained control for hotplug HW for pci %s (%s)\n",
+				pci_name(dev), path_name);
+			return 0;
+		}
+		if (is_root_bridge(handle))
+			break;
+		chandle = handle;
+		status = acpi_get_parent(chandle, &handle);
+		if (ACPI_FAILURE(status))
+			break;
+	}
+
+	err("Cannot get control of hotplug hardware for pci %s\n",
+			pci_name(dev));
+	return -1;
+}
+#endif
+
+
+
 int pcie_init(struct controller * ctrl, struct pcie_device *dev)
 {
 	struct php_ctlr_state_s *php_ctlr, *p;
drivers/pci/hotplug/pciehprm_acpi.c deleted +0 -257
@@ -1,257 +0,0 @@
-/*
- * PCIEHPRM ACPI: PHP Resource Manager for ACPI platform
- *
- * Copyright (C) 2003-2004 Intel Corporation
- *
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT.  See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Send feedback to <[email protected]>
- *
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/acpi.h>
-#include <linux/pci-acpi.h>
-#include <acpi/acpi_bus.h>
-#include <acpi/actypes.h>
-#include "pciehp.h"
-
-#define	METHOD_NAME__SUN	"_SUN"
-#define	METHOD_NAME__HPP	"_HPP"
-#define	METHOD_NAME_OSHP	"OSHP"
-
-static u8 * acpi_path_name( acpi_handle	handle)
-{
-	acpi_status		status;
-	static u8		path_name[ACPI_PATHNAME_MAX];
-	struct acpi_buffer	ret_buf = { ACPI_PATHNAME_MAX, path_name };
-
-	memset(path_name, 0, sizeof (path_name));
-	status = acpi_get_name(handle, ACPI_FULL_PATHNAME, &ret_buf);
-
-	if (ACPI_FAILURE(status))
-		return NULL;
-	else
-		return path_name;	
-}
-
-static acpi_status
-acpi_run_hpp(acpi_handle handle, struct hotplug_params *hpp)
-{
-	acpi_status		status;
-	u8			nui[4];
-	struct acpi_buffer	ret_buf = { 0, NULL};
-	union acpi_object	*ext_obj, *package;
-	u8			*path_name = acpi_path_name(handle);
-	int			i, len = 0;
-
-	/* get _hpp */
-	status = acpi_evaluate_object(handle, METHOD_NAME__HPP, NULL, &ret_buf);
-	switch (status) {
-	case AE_BUFFER_OVERFLOW:
-		ret_buf.pointer = kmalloc (ret_buf.length, GFP_KERNEL);
-		if (!ret_buf.pointer) {
-			err ("%s:%s alloc for _HPP fail\n", __FUNCTION__,
-					path_name);
-			return AE_NO_MEMORY;
-		}
-		status = acpi_evaluate_object(handle, METHOD_NAME__HPP,
-				NULL, &ret_buf);
-		if (ACPI_SUCCESS(status))
-			break;
-	default:
-		if (ACPI_FAILURE(status)) {
-			dbg("%s:%s _HPP fail=0x%x\n", __FUNCTION__,
-					path_name, status);
-			return status;
-		}
-	}
-
-	ext_obj = (union acpi_object *) ret_buf.pointer;
-	if (ext_obj->type != ACPI_TYPE_PACKAGE) {
-		err ("%s:%s _HPP obj not a package\n", __FUNCTION__,
-				path_name);
-		status = AE_ERROR;
-		goto free_and_return;
-	}
-
-	len = ext_obj->package.count;
-	package = (union acpi_object *) ret_buf.pointer;
-	for ( i = 0; (i < len) || (i < 4); i++) {
-		ext_obj = (union acpi_object *) &package->package.elements[i];
-		switch (ext_obj->type) {
-		case ACPI_TYPE_INTEGER:
-			nui[i] = (u8)ext_obj->integer.value;
-			break;
-		default:
-			err ("%s:%s _HPP obj type incorrect\n", __FUNCTION__,
-					path_name);
-			status = AE_ERROR;
-			goto free_and_return;
-		}
-	}
-
-	hpp->cache_line_size = nui[0];
-	hpp->latency_timer = nui[1];
-	hpp->enable_serr = nui[2];
-	hpp->enable_perr = nui[3];
-
-	dbg("  _HPP: cache_line_size=0x%x\n", hpp->cache_line_size);
-	dbg("  _HPP: latency timer  =0x%x\n", hpp->latency_timer);
-	dbg("  _HPP: enable SERR    =0x%x\n", hpp->enable_serr);
-	dbg("  _HPP: enable PERR    =0x%x\n", hpp->enable_perr);
-
-free_and_return:
-	kfree(ret_buf.pointer);
-	return status;
-}
-
-static acpi_status acpi_run_oshp(acpi_handle handle)
-{
-	acpi_status		status;
-	u8			*path_name = acpi_path_name(handle);
-
-	/* run OSHP */
-	status = acpi_evaluate_object(handle, METHOD_NAME_OSHP, NULL, NULL);
-	if (ACPI_FAILURE(status)) {
-		dbg("%s:%s OSHP fails=0x%x\n", __FUNCTION__, path_name,
-				status);
-	} else {
-		dbg("%s:%s OSHP passes\n", __FUNCTION__, path_name);
-	}
-	return status;
-}
-
-static int is_root_bridge(acpi_handle handle)
-{
-	acpi_status status;
-	struct acpi_device_info *info;
-	struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
-	int i;
-
-	status = acpi_get_object_info(handle, &buffer);
-	if (ACPI_SUCCESS(status)) {
-		info = buffer.pointer;
-		if ((info->valid & ACPI_VALID_HID) &&
-			!strcmp(PCI_ROOT_HID_STRING,
-					info->hardware_id.value)) {
-			acpi_os_free(buffer.pointer);
-			return 1;
-		}
-		if (info->valid & ACPI_VALID_CID) {
-			for (i=0; i < info->compatibility_id.count; i++) {
-				if (!strcmp(PCI_ROOT_HID_STRING,
-					info->compatibility_id.id[i].value)) {
-					acpi_os_free(buffer.pointer);
-					return 1;
-				}
-			}
-		}
-	}
-	return 0;
-}
-
-int pciehp_get_hp_hw_control_from_firmware(struct pci_dev *dev)
-{
-	acpi_status status;
-	acpi_handle chandle, handle = DEVICE_ACPI_HANDLE(&(dev->dev));
-	struct pci_dev *pdev = dev;
-	struct pci_bus *parent;
-	u8 *path_name;
-
-	/*
-	 * Per PCI firmware specification, we should run the ACPI _OSC
-	 * method to get control of hotplug hardware before using it.
-	 * If an _OSC is missing, we look for an OSHP to do the same thing.
-	 * To handle different BIOS behavior, we look for _OSC and OSHP
-	 * within the scope of the hotplug controller and its parents, upto
-	 * the host bridge under which this controller exists.
-	 */
-	while (!handle) {
-		/*
-		 * This hotplug controller was not listed in the ACPI name
-		 * space at all. Try to get acpi handle of parent pci bus.
-		 */
-		if (!pdev || !pdev->bus->parent)
-			break;
-		parent = pdev->bus->parent;
-		dbg("Could not find %s in acpi namespace, trying parent\n",
-				pci_name(pdev));
-		if (!parent->self)
-			/* Parent must be a host bridge */
-			handle = acpi_get_pci_rootbridge_handle(
-					pci_domain_nr(parent),
-					parent->number);
-		else
-			handle = DEVICE_ACPI_HANDLE(
-					&(parent->self->dev));
-		pdev = parent->self;
-	}
-
-	while (handle) {
-		path_name = acpi_path_name(handle);
-		dbg("Trying to get hotplug control for %s \n", path_name);
-		status = pci_osc_control_set(handle,
-				OSC_PCI_EXPRESS_NATIVE_HP_CONTROL);
-		if (status == AE_NOT_FOUND)
-			status = acpi_run_oshp(handle);
-		if (ACPI_SUCCESS(status)) {
-			dbg("Gained control for hotplug HW for pci %s (%s)\n",
-				pci_name(dev), path_name);
-			return 0;
-		}
-		if (is_root_bridge(handle))
-			break;
-		chandle = handle;
-		status = acpi_get_parent(chandle, &handle);
-		if (ACPI_FAILURE(status))
-			break;
-	}
-
-	err("Cannot get control of hotplug hardware for pci %s\n",
-			pci_name(dev));
-	return -1;
-}
-
-void pciehp_get_hp_params_from_firmware(struct pci_dev *dev,
-		struct hotplug_params *hpp)
-{
-	acpi_status status = AE_NOT_FOUND;
-	struct pci_dev *pdev = dev;
-
-	/*
-	 * _HPP settings apply to all child buses, until another _HPP is
-	 * encountered. If we don't find an _HPP for the input pci dev,
-	 * look for it in the parent device scope since that would apply to
-	 * this pci dev. If we don't find any _HPP, use hardcoded defaults
-	 */
-	while (pdev && (ACPI_FAILURE(status))) {
-		acpi_handle handle = DEVICE_ACPI_HANDLE(&(pdev->dev));
-		if (!handle)
-			break;
-		status = acpi_run_hpp(handle, hpp);
-		if (!(pdev->bus->parent))
-			break;
-		/* Check if a parent object supports _HPP */
-		pdev = pdev->bus->parent->self;
-	}
-}
-
drivers/pci/hotplug/pciehprm_nonacpi.c deleted +0 -47
@@ -1,47 +0,0 @@
-/*
- * PCIEHPRM NONACPI: PHP Resource Manager for Non-ACPI/Legacy platform
- *
- * Copyright (C) 1995,2001 Compaq Computer Corporation
- * Copyright (C) 2001 Greg Kroah-Hartman ([email protected])
- * Copyright (C) 2001 IBM Corp.
- * Copyright (C) 2003-2004 Intel Corporation
- *
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT.  See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Send feedback to <[email protected]>, <[email protected]>
- *
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/sched.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include "pciehp.h"
-
-void pciehp_get_hp_params_from_firmware(struct pci_dev *dev,
-		struct hotplug_params *hpp)
-{
-	return;
-}
-
-int pciehp_get_hp_hw_control_from_firmware(struct pci_dev *dev)
-{
-	return 0;
-}
drivers/pci/hotplug/shpchp.h +14 -11
@@ -106,12 +106,6 @@ struct controller {
 	volatile int cmd_busy;
 };
 
-struct hotplug_params {
-	u8	cache_line_size;
-	u8	latency_timer;
-	u8	enable_serr;
-	u8	enable_perr;
-};
 
 /* Define AMD SHPC ID  */
 #define PCI_DEVICE_ID_AMD_GOLAM_7450	0x7450 
@@ -193,15 +187,24 @@ extern u8	shpchp_handle_power_fault(u8 h
 extern int	shpchp_save_config(struct controller *ctrl, int busnumber, int num_ctlr_slots, int first_device_num);
 extern int	shpchp_configure_device(struct slot *p_slot);
 extern int	shpchp_unconfigure_device(struct slot *p_slot);
-extern void	get_hp_hw_control_from_firmware(struct pci_dev *dev);
-extern void	get_hp_params_from_firmware(struct pci_dev *dev,
-		struct hotplug_params *hpp);
-extern int	shpchprm_get_physical_slot_number(struct controller *ctrl,
-		u32 *sun, u8 busnum, u8 devnum);
 extern void	shpchp_remove_ctrl_files(struct controller *ctrl);
 extern void	cleanup_slots(struct controller *ctrl);
 extern void	queue_pushbutton_work(void *data);
 
+
+#ifdef CONFIG_ACPI
+#define get_hp_params_from_firmware(dev, hpp) \
+	acpi_get_hp_params_from_firmware(dev, hpp)
+#define get_hp_hw_control_from_firmware(pdev) \
+	do { \
+		if (DEVICE_ACPI_HANDLE(&(pdev->dev))) \
+			acpi_run_oshp(DEVICE_ACPI_HANDLE(&(pdev->dev))); \
+	} while (0)
+#else
+#define get_hp_params_from_firmware(dev, hpp)
+#define get_hp_hw_control_from_firmware(dev)
+#endif
+
 struct ctrl_reg {
 	volatile u32 base_offset;
 	volatile u32 slot_avail1;
drivers/pci/hotplug/shpchp_core.c +17 -0
@@ -104,6 +104,23 @@ static void make_slot_name(struct slot *
 		 slot->bus, slot->number);
 }
 
+
+
+
+static int
+shpchprm_get_physical_slot_number(struct controller *ctrl, u32 *sun,
+				u8 busnum, u8 devnum)
+{
+	int offset = devnum - ctrl->slot_device_offset;
+
+	dbg("%s: ctrl->slot_num_inc %d, offset %d\n", __FUNCTION__,
+			ctrl->slot_num_inc, offset);
+	*sun = (u8) (ctrl->first_slot + ctrl->slot_num_inc *offset);
+	return 0;
+}
+
+
+
 static int init_slots(struct controller *ctrl)
 {
 	struct slot *slot;
drivers/pci/hotplug/shpchprm_acpi.c deleted +0 -186
@@ -1,186 +0,0 @@
-/*
- * SHPCHPRM ACPI: PHP Resource Manager for ACPI platform
- *
- * Copyright (C) 2003-2004 Intel Corporation
- *
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT.  See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Send feedback to <[email protected]>
- *
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <acpi/acpi.h>
-#include <acpi/acpi_bus.h>
-#include <acpi/actypes.h>
-#include "shpchp.h"
-
-#define	METHOD_NAME__SUN	"_SUN"
-#define	METHOD_NAME__HPP	"_HPP"
-#define	METHOD_NAME_OSHP	"OSHP"
-
-static u8 * acpi_path_name( acpi_handle	handle)
-{
-	acpi_status		status;
-	static u8	path_name[ACPI_PATHNAME_MAX];
-	struct acpi_buffer		ret_buf = { ACPI_PATHNAME_MAX, path_name };
-
-	memset(path_name, 0, sizeof (path_name));
-	status = acpi_get_name(handle, ACPI_FULL_PATHNAME, &ret_buf);
-
-	if (ACPI_FAILURE(status))
-		return NULL;
-	else
-		return path_name;	
-}
-
-static acpi_status
-acpi_run_hpp(acpi_handle handle, struct hotplug_params *hpp)
-{
-	acpi_status		status;
-	u8			nui[4];
-	struct acpi_buffer	ret_buf = { 0, NULL};
-	union acpi_object	*ext_obj, *package;
-	u8			*path_name = acpi_path_name(handle);
-	int			i, len = 0;
-
-	/* get _hpp */
-	status = acpi_evaluate_object(handle, METHOD_NAME__HPP, NULL, &ret_buf);
-	switch (status) {
-	case AE_BUFFER_OVERFLOW:
-		ret_buf.pointer = kmalloc (ret_buf.length, GFP_KERNEL);
-		if (!ret_buf.pointer) {
-			err ("%s:%s alloc for _HPP fail\n", __FUNCTION__,
-					path_name);
-			return AE_NO_MEMORY;
-		}
-		status = acpi_evaluate_object(handle, METHOD_NAME__HPP,
-				NULL, &ret_buf);
-		if (ACPI_SUCCESS(status))
-			break;
-	default:
-		if (ACPI_FAILURE(status)) {
-			dbg("%s:%s _HPP fail=0x%x\n", __FUNCTION__,
-					path_name, status);
-			return status;
-		}
-	}
-
-	ext_obj = (union acpi_object *) ret_buf.pointer;
-	if (ext_obj->type != ACPI_TYPE_PACKAGE) {
-		err ("%s:%s _HPP obj not a package\n", __FUNCTION__,
-				path_name);
-		status = AE_ERROR;
-		goto free_and_return;
-	}
-
-	len = ext_obj->package.count;
-	package = (union acpi_object *) ret_buf.pointer;
-	for ( i = 0; (i < len) || (i < 4); i++) {
-		ext_obj = (union acpi_object *) &package->package.elements[i];
-		switch (ext_obj->type) {
-		case ACPI_TYPE_INTEGER:
-			nui[i] = (u8)ext_obj->integer.value;
-			break;
-		default:
-			err ("%s:%s _HPP obj type incorrect\n", __FUNCTION__,
-					path_name);
-			status = AE_ERROR;
-			goto free_and_return;
-		}
-	}
-
-	hpp->cache_line_size = nui[0];
-	hpp->latency_timer = nui[1];
-	hpp->enable_serr = nui[2];
-	hpp->enable_perr = nui[3];
-
-	dbg("  _HPP: cache_line_size=0x%x\n", hpp->cache_line_size);
-	dbg("  _HPP: latency timer  =0x%x\n", hpp->latency_timer);
-	dbg("  _HPP: enable SERR    =0x%x\n", hpp->enable_serr);
-	dbg("  _HPP: enable PERR    =0x%x\n", hpp->enable_perr);
-
-free_and_return:
-	kfree(ret_buf.pointer);
-	return status;
-}
-
-static void acpi_run_oshp(acpi_handle handle)
-{
-	acpi_status		status;
-	u8			*path_name = acpi_path_name(handle);
-
-	/* run OSHP */
-	status = acpi_evaluate_object(handle, METHOD_NAME_OSHP, NULL, NULL);
-	if (ACPI_FAILURE(status)) {
-		err("%s:%s OSHP fails=0x%x\n", __FUNCTION__, path_name,
-				status);
-	} else {
-		dbg("%s:%s OSHP passes\n", __FUNCTION__, path_name);
-	}
-}
-
-int shpchprm_get_physical_slot_number(struct controller *ctrl, u32 *sun, u8 busnum, u8 devnum)
-{
-	int offset = devnum - ctrl->slot_device_offset;
-
-	dbg("%s: ctrl->slot_num_inc %d, offset %d\n", __FUNCTION__, ctrl->slot_num_inc, offset);
-	*sun = (u8) (ctrl->first_slot + ctrl->slot_num_inc *offset);
-	return 0;
-}
-
-void get_hp_hw_control_from_firmware(struct pci_dev *dev)
-{
-	/*
-	 * OSHP is an optional ACPI firmware control method. If present,
-	 * we need to run it to inform BIOS that we will control SHPC
-	 * hardware from now on.
-	 */
-	acpi_handle handle = DEVICE_ACPI_HANDLE(&(dev->dev));
-	if (!handle)
-		return;
-	acpi_run_oshp(handle);
-}
-
-void get_hp_params_from_firmware(struct pci_dev *dev,
-		struct hotplug_params *hpp)
-{
-	acpi_status status = AE_NOT_FOUND;
-	struct pci_dev *pdev = dev;
-
-	/*
-	 * _HPP settings apply to all child buses, until another _HPP is
-	 * encountered. If we don't find an _HPP for the input pci dev,
-	 * look for it in the parent device scope since that would apply to
-	 * this pci dev. If we don't find any _HPP, use hardcoded defaults
-	 */
-	while (pdev && (ACPI_FAILURE(status))) {
-		acpi_handle handle = DEVICE_ACPI_HANDLE(&(pdev->dev));
-		if (!handle)
-			break;
-		status = acpi_run_hpp(handle, hpp);
-		if (!(pdev->bus->parent))
-			break;
-		/* Check if a parent object supports _HPP */
-		pdev = pdev->bus->parent->self;
-	}
-}
-
drivers/pci/hotplug/shpchprm_legacy.c deleted +0 -54
@@ -1,54 +0,0 @@
-/*
- * SHPCHPRM Legacy: PHP Resource Manager for Non-ACPI/Legacy platform
- *
- * Copyright (C) 1995,2001 Compaq Computer Corporation
- * Copyright (C) 2001 Greg Kroah-Hartman ([email protected])
- * Copyright (C) 2001 IBM Corp.
- * Copyright (C) 2003-2004 Intel Corporation
- *
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT.  See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Send feedback to <[email protected]>,<[email protected]>
- *
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include "shpchp.h"
-
-int shpchprm_get_physical_slot_number(struct controller *ctrl, u32 *sun, u8 busnum, u8 devnum)
-{
-	int	offset = devnum - ctrl->slot_device_offset;
-
-	*sun = (u8) (ctrl->first_slot + ctrl->slot_num_inc * offset);
-	return 0;
-}
-
-void get_hp_params_from_firmware(struct pci_dev *dev,
-		struct hotplug_params *hpp)
-{
-	return;
-}
-
-void get_hp_hw_control_from_firmware(struct pci_dev *dev)
-{
-	return;
-}
-
drivers/pci/hotplug/shpchprm_nonacpi.c deleted +0 -58
@@ -1,57 +0,0 @@
-/*
- * SHPCHPRM NONACPI: PHP Resource Manager for Non-ACPI/Legacy platform
- *
- * Copyright (C) 1995,2001 Compaq Computer Corporation
- * Copyright (C) 2001 Greg Kroah-Hartman ([email protected])
- * Copyright (C) 2001 IBM Corp.
- * Copyright (C) 2003-2004 Intel Corporation
- *
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT.  See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Send feedback to <[email protected]>, <[email protected]>
- *
- */
-
-#include <linux/config.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-
-#include "shpchp.h"
-
-int shpchprm_get_physical_slot_number(struct controller *ctrl, u32 *sun, u8 busnum, u8 devnum)
-{
-	int	offset = devnum - ctrl->slot_device_offset;
-
-	dbg("%s: ctrl->slot_num_inc %d, offset %d\n", __FUNCTION__, ctrl->slot_num_inc, offset);
-	*sun = (u8) (ctrl->first_slot + ctrl->slot_num_inc * offset);
-	return 0;
-}
-
-void get_hp_params_from_firmware(struct pci_dev *dev,
-		struct hotplug_params *hpp)
-{
-	return;
-}
-
-void get_hp_hw_control_from_firmware(struct pci_dev *dev)
-{
-	return;
-}
 
 
 
-------------------------------------------------------

This SF.Net email is sponsored by xPML, a groundbreaking scripting language that extends applications into web and mobile media. Attend the live webcast and join the prime developer group breaking into this new coding territory!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642
_______________________________________________
Pcihpd-discuss mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/pcihpd-discuss

#6 lore raw
Quoted 34 lines · Kenji Kaneshige

Hi Kristen,

Here is one more comment.

Quoted 14 lines
drivers/pci/hotplug/acpi_pcihp.c new file +14 -0
+void acpi_get_hp_params_from_firmware(struct pci_dev *dev,
+		struct hotplug_params *hpp)
+{
+	acpi_status status = AE_NOT_FOUND;
+	struct pci_dev *pdev = dev;
+
+	/*
+	 * _HPP settings apply to all child buses, until another _HPP is
+	 * encountered. If we don't find an _HPP for the input pci dev,
+	 * look for it in the parent device scope since that would apply to
+	 * this pci dev. If we don't find any _HPP, use hardcoded defaults
+	 */
+	while (pdev && (ACPI_FAILURE(status))) {
+		acpi_handle handle = DEVICE_ACPI_HANDLE(&(pdev->dev));

drivers/pci/hotplug/acpi_pcihp.c line 169

Quoted 10 lines
drivers/pci/hotplug/acpi_pcihp.c new file +10 -0
+		if (!handle)
+			break;
+		status = acpi_run_hpp(handle, hpp);
+		if (!(pdev->bus->parent))
+			break;
+		/* Check if a parent object supports _HPP */
+		pdev = pdev->bus->parent->self;
+	}
+}
+EXPORT_SYMBOL_GPL(acpi_get_hp_params_from_firmware);

I think the acpi_get_hp_params_from_firmware() function assumes that users set default hpp parameters into *hpp before calling this function. I think it is very hard for new users of the function to notice it, so I think this assumption should be removed.

Quoted 3 lines

Thanks,
Kenji Kaneshige

Are you suggesting that we have the defaults set within this function? I would like to change acpiphp to use the same functions to get hpp values eventually (in a different patch), but I notice that acpiphp sets the default cache line size to 8, while shpchp sets the default cache line size to 16. So it seems like it would be better to allow drivers to set the default themselves, unless one of these drivers is doing the wrong thing and using the wrong default value.

#7 lore raw
Quoted 42 lines · Kristen Accardi
Quoted 35 lines · Kenji Kaneshige

Hi Kristen,

Here is one more comment.

Quoted 14 lines
(quoted diff) +14 -0
+void acpi_get_hp_params_from_firmware(struct pci_dev *dev,
+		struct hotplug_params *hpp)
+{
+	acpi_status status = AE_NOT_FOUND;
+	struct pci_dev *pdev = dev;
+
+	/*
+	 * _HPP settings apply to all child buses, until another _HPP is
+	 * encountered. If we don't find an _HPP for the input pci dev,
+	 * look for it in the parent device scope since that would apply to
+	 * this pci dev. If we don't find any _HPP, use hardcoded defaults
+	 */
+	while (pdev && (ACPI_FAILURE(status))) {
+		acpi_handle handle = DEVICE_ACPI_HANDLE(&(pdev->dev));

Review

Quoted 10 lines
(quoted diff) +10 -0
+		if (!handle)
+			break;
+		status = acpi_run_hpp(handle, hpp);
+		if (!(pdev->bus->parent))
+			break;
+		/* Check if a parent object supports _HPP */
+		pdev = pdev->bus->parent->self;
+	}
+}
+EXPORT_SYMBOL_GPL(acpi_get_hp_params_from_firmware);

I think the acpi_get_hp_params_from_firmware() function assumes that users set default hpp parameters into *hpp before calling this function. I think it is very hard for new users of the function to notice it, so I think this assumption should be removed.

Quoted 3 lines

Thanks,
Kenji Kaneshige

Quoted 8 lines

Are you suggesting that we have the defaults set within this function? I would like to change acpiphp to use the same functions to get hpp values eventually (in a different patch), but I notice that acpiphp sets the default cache line size to 8, while shpchp sets the default cache line size to 16. So it seems like it would be better to allow drivers to set the default themselves, unless one of these drivers is doing the wrong thing and using the wrong default value.

The other options are:

(a) Leave the code as it is, and put the comments to indicate users how to use this function. That is, users have to set defaults before calling this function, otherwise the parameters returned from the function would be undefined.

(b) Change the return value to let users know whether _HPP parameters were successfully parsed.

I'd prefer (b).
I'm attaching the sample patch for (b), though I've not tested it at all. This patch is against 2.6.16-rc5-mm1 with the following patches applied

- shpchp: cleanup bus speed handling
- acpiphp: Scan slots under the nested P2P bridge
- Your set of patches

Thanks,
Kenji Kaneshige

---
 drivers/pci/hotplug/acpi_pcihp.c  |    4 +++-
 drivers/pci/hotplug/pci_hotplug.h |    2 +-
 drivers/pci/hotplug/pciehp.h      |    9 +++++++++
 drivers/pci/hotplug/shpchp.h      |   12 +++++++++---
 drivers/pci/hotplug/shpchp_pci.c  |   15 +++++++++++++--
 5 files changed, 35 insertions(+), 7 deletions(-)
drivers/pci/hotplug/acpi_pcihp.c +3 -1
Index: linux-2.6.16-rc5-mm1/drivers/pci/hotplug/acpi_pcihp.c
===================================================================
@@ -143,7 +143,7 @@
 
 
 
-void acpi_get_hp_params_from_firmware(struct pci_dev *dev,
+acpi_status acpi_get_hp_params_from_firmware(struct pci_dev *dev,
 		struct hotplug_params *hpp)
 {
 	acpi_status status = AE_NOT_FOUND;
@@ -165,6 +165,8 @@
 		/* Check if a parent object supports _HPP */
 		pdev = pdev->bus->parent->self;
 	}
+
+	return status;
 }
 EXPORT_SYMBOL_GPL(acpi_get_hp_params_from_firmware);
 
drivers/pci/hotplug/pci_hotplug.h +1 -1
Index: linux-2.6.16-rc5-mm1/drivers/pci/hotplug/pci_hotplug.h
===================================================================
@@ -188,7 +188,7 @@
 #include <acpi/acpi_bus.h>
 #include <acpi/actypes.h>
 extern acpi_status acpi_run_oshp(acpi_handle handle);
-extern void acpi_get_hp_params_from_firmware(struct pci_dev *dev,
+extern acpi_status acpi_get_hp_params_from_firmware(struct pci_dev *dev,
 		struct hotplug_params *hpp);
 extern u8 * acpi_path_name( acpi_handle	handle);
 int is_root_bridge(acpi_handle handle);
drivers/pci/hotplug/shpchp.h +9 -3
Index: linux-2.6.16-rc5-mm1/drivers/pci/hotplug/shpchp.h
===================================================================
@@ -193,15 +193,21 @@
 
 
 #ifdef CONFIG_ACPI
-#define get_hp_params_from_firmware(dev, hpp) \
-	acpi_get_hp_params_from_firmware(dev, hpp)
+static inline int get_hp_params_from_firmware(struct pci_dev *dev,
+					      struct hotplug_params *hpp)
+{
+	acpi_status status = acpi_get_hp_params_from_firmware(dev, hpp);
+	if (ACPI_FAILURE(status))
+		return -ENODEV;
+	return 0;
+}
 #define get_hp_hw_control_from_firmware(pdev) \
 	do { \
 		if (DEVICE_ACPI_HANDLE(&(pdev->dev))) \
 			acpi_run_oshp(DEVICE_ACPI_HANDLE(&(pdev->dev))); \
 	} while (0)
 #else
-#define get_hp_params_from_firmware(dev, hpp)
+#define get_hp_params_from_firmware(dev, hpp)		(-ENODEV)
 #define get_hp_hw_control_from_firmware(dev)
 #endif
 
drivers/pci/hotplug/shpchp_pci.c +13 -2
Index: linux-2.6.16-rc5-mm1/drivers/pci/hotplug/shpchp_pci.c
===================================================================
@@ -38,7 +38,8 @@
 {
 	u16 pci_cmd, pci_bctl;
 	struct pci_dev *cdev;
-	struct hotplug_params hpp = {0x8, 0x40, 0, 0}; /* defaults */
+	struct hotplug_params hpp;
+	int rc;
 
 	/* Program hpp values for this device */
 	if (!(dev->hdr_type == PCI_HEADER_TYPE_NORMAL ||
@@ -46,7 +47,17 @@
 			(dev->class >> 8) == PCI_CLASS_BRIDGE_PCI)))
 		return;
 
-	get_hp_params_from_firmware(dev, &hpp);
+	rc = get_hp_params_from_firmware(dev, &hpp);
+	if (rc) {
+		/*
+		 * If we could not get hotplug parameters from
+		 * firmware, use hardcoded defaults.
+		 */
+		hpp.cache_line_size = 0x8;
+		hpp.latency_timer = 0x40;
+		hpp.enable_serr = 0;
+		hpp.enable_perr = 0;
+	}
 
 	pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, hpp.cache_line_size);
 	pci_write_config_byte(dev, PCI_LATENCY_TIMER, hpp.latency_timer);
drivers/pci/hotplug/pciehp.h +9 -0
Index: linux-2.6.16-rc5-mm1/drivers/pci/hotplug/pciehp.h
===================================================================
@@ -281,10 +281,19 @@
 #ifdef CONFIG_ACPI
 #define pciehp_get_hp_hw_control_from_firmware(dev) \
 	pciehp_acpi_get_hp_hw_control_from_firmware(dev)
+static inline int pciehp_get_hp_params_from_firmware(struct pci_dev *dev,
+						struct hotplug_params *hpp)
+{
+	acpi_status status = acpi_get_hp_params_from_firmware(dev, hpp);
+	if (ACPI_FAILURE(status))
+		return -ENODEV;
+	return 0;
+}
 #define pciehp_get_hp_params_from_firmware(dev, hpp) \
 	acpi_get_hp_params_from_firmware(dev, hpp)
 #else
 #define pciehp_get_hp_hw_control_from_firmware(dev) 	0
 #define acpi_get_hp_params_from_firmware(dev, hpp)
+#define pciehp_get_hp_params_from_firmware(dev, hpp)	(-ENODEV)
 #endif 				/* CONFIG_ACPI */
 #endif				/* _PCIEHP_H */
#8 lore raw
Quoted 66 lines · Kenji Kaneshige
Quoted 42 lines · Kristen Accardi
Quoted 35 lines · Kenji Kaneshige

Hi Kristen,

Here is one more comment.

Quoted 14 lines
(quoted diff) +14 -0
+void acpi_get_hp_params_from_firmware(struct pci_dev *dev,
+		struct hotplug_params *hpp)
+{
+	acpi_status status = AE_NOT_FOUND;
+	struct pci_dev *pdev = dev;
+
+	/*
+	 * _HPP settings apply to all child buses, until another _HPP is
+	 * encountered. If we don't find an _HPP for the input pci dev,
+	 * look for it in the parent device scope since that would apply to
+	 * this pci dev. If we don't find any _HPP, use hardcoded defaults
+	 */
+	while (pdev && (ACPI_FAILURE(status))) {
+		acpi_handle handle = DEVICE_ACPI_HANDLE(&(pdev->dev));

Review

Quoted 10 lines
(quoted diff) +10 -0
+		if (!handle)
+			break;
+		status = acpi_run_hpp(handle, hpp);
+		if (!(pdev->bus->parent))
+			break;
+		/* Check if a parent object supports _HPP */
+		pdev = pdev->bus->parent->self;
+	}
+}
+EXPORT_SYMBOL_GPL(acpi_get_hp_params_from_firmware);

I think the acpi_get_hp_params_from_firmware() function assumes that users set default hpp parameters into *hpp before calling this function. I think it is very hard for new users of the function to notice it, so I think this assumption should be removed.

Quoted 3 lines

Thanks,
Kenji Kaneshige

Quoted 8 lines

Are you suggesting that we have the defaults set within this function? I would like to change acpiphp to use the same functions to get hpp values eventually (in a different patch), but I notice that acpiphp sets the default cache line size to 8, while shpchp sets the default cache line size to 16. So it seems like it would be better to allow drivers to set the default themselves, unless one of these drivers is doing the wrong thing and using the wrong default value.

The other options are:

(a) Leave the code as it is, and put the comments to indicate users how to use this function. That is, users have to set defaults before calling this function, otherwise the parameters returned from the function would be undefined.

(b) Change the return value to let users know whether _HPP parameters were successfully parsed.

I'd prefer (b).
I'm attaching the sample patch for (b), though I've not tested it at all. This patch is against 2.6.16-rc5-mm1 with the following patches applied

Quoted 7 lines

- shpchp: cleanup bus speed handling
- acpiphp: Scan slots under the nested P2P bridge
- Your set of patches

Thanks,
Kenji Kaneshige

Kenji,
Thanks for the feedback, I will implement (b) as part of my next patch which also incorporates all the other feedback I've gotten - coming hopefully tomorrow or so.

Kristen

#9 lore raw

PATCH 1/1 pci hotplug: add common acpi functions to core v2

In reply to Kristen Accardi

shpchprm_acpi.c and pciehprm_acpi.c are nearly identical.
In addition, there are functions in both these files that
are also in acpiphp_glue.c. This patch will remove duplicate functions from shpchp, pciehp, and acpiphp and move this functionality to pci_hotplug, as it is not hardware specific. Get rid of shpchprm* and pciehprm* files since they are no longer needed. shpchprm_nonacpi.c and pciehprm_nonacpi.c are identical, as well as shpchprm_legacy.c and can be replaced with a macro.

This patch also changes acpiphp to use the common hpp code.

---

 dev/null                               |binary
 dev/null                               |binary
 drivers/pci/hotplug/pciehprm_acpi.c    |  257 ---------------------------------
 drivers/pci/hotplug/pciehprm_nonacpi.c |   47 ------
 drivers/pci/hotplug/shpchprm_acpi.c    |  186 -----------------------
 drivers/pci/hotplug/shpchprm_legacy.c  |   54 ------
 drivers/pci/hotplug/shpchprm_nonacpi.c |   57 -------
 drivers/pci/hotplug/Makefile           |   17 --
 drivers/pci/hotplug/acpi_pcihp.c       |  227 +++++++++++++++++++++++++++++
 drivers/pci/hotplug/acpiphp.h          |   15 -
 drivers/pci/hotplug/acpiphp_glue.c     |   91 +----------
 drivers/pci/hotplug/pci_hotplug.h      |   17 ++
 drivers/pci/hotplug/pciehp.h           |   24 +--
 drivers/pci/hotplug/pciehp_hpc.c       |   74 +++++++++
 drivers/pci/hotplug/shpchp.h           |   30 ++-
 drivers/pci/hotplug/shpchp_core.c      |   17 ++
 drivers/pci/hotplug/shpchp_pci.c       |   10 +
 15 files changed, 393 insertions(+), 730 deletions(-)
drivers/pci/hotplug/Makefile +3 -14
@@ -22,6 +22,9 @@ ifdef CONFIG_HOTPLUG_PCI_CPCI
 pci_hotplug-objs	+=	cpci_hotplug_core.o	\
 				cpci_hotplug_pci.o
 endif
+ifdef CONFIG_ACPI
+pci_hotplug-objs 	+= 	acpi_pcihp.o
+endif
 
 cpqphp-objs		:=	cpqphp_core.o	\
 				cpqphp_ctrl.o	\
@@ -51,23 +54,9 @@ pciehp-objs		:=	pciehp_core.o	\
 				pciehp_ctrl.o	\
 				pciehp_pci.o	\
 				pciehp_hpc.o
-ifdef CONFIG_ACPI
-	pciehp-objs += pciehprm_acpi.o
-else
-	pciehp-objs += pciehprm_nonacpi.o
-endif
 
 shpchp-objs		:=	shpchp_core.o	\
 				shpchp_ctrl.o	\
 				shpchp_pci.o	\
 				shpchp_sysfs.o	\
 				shpchp_hpc.o
-ifdef CONFIG_ACPI
-	shpchp-objs += shpchprm_acpi.o
-else
-	ifdef CONFIG_HOTPLUG_PCI_SHPC_PHPRM_LEGACY
-		shpchp-objs += shpchprm_legacy.o
-	else
-		shpchp-objs += shpchprm_nonacpi.o
-	endif
-endif
drivers/pci/hotplug/acpi_pcihp.c new file +227 -0

227 lines not on this page · raw message

drivers/pci/hotplug/acpiphp_glue.c +13 -78

139 lines not on this page · raw message

drivers/pci/hotplug/pci_hotplug.h +17 -0
@@ -176,5 +176,22 @@ extern int pci_hp_change_slot_info	(stru
 					 struct hotplug_slot_info *info);
 extern struct subsystem pci_hotplug_slots_subsys;
 
+struct hotplug_params {
+	u8 cache_line_size;
+	u8 latency_timer;
+	u8 enable_serr;
+	u8 enable_perr;
+};
+
+#ifdef CONFIG_ACPI
+#include <acpi/acpi.h>
+#include <acpi/acpi_bus.h>
+#include <acpi/actypes.h>
+extern acpi_status acpi_run_oshp(acpi_handle handle);
+extern acpi_status acpi_get_hp_params_from_firmware(struct pci_dev *dev,
+				struct hotplug_params *hpp);
+extern u8 * acpi_path_name(acpi_handle handle);
+int acpi_root_bridge(acpi_handle handle);
+#endif
 #endif
 
drivers/pci/hotplug/pciehp.h +15 -9
@@ -50,12 +50,6 @@ extern int pciehp_force;
 #define info(format, arg...) printk(KERN_INFO "%s: " format, MY_NAME , ## arg)
 #define warn(format, arg...) printk(KERN_WARNING "%s: " format, MY_NAME , ## arg)
 
-struct hotplug_params {
-	u8 cache_line_size;
-	u8 latency_timer;
-	u8 enable_serr;
-	u8 enable_perr;
-};
 
 struct slot {
 	struct slot *next;
@@ -192,9 +186,6 @@ extern u8	pciehp_handle_power_fault	(u8 
 /* pci functions */
 extern int	pciehp_configure_device		(struct slot *p_slot);
 extern int	pciehp_unconfigure_device	(struct slot *p_slot);
-extern int	pciehp_get_hp_hw_control_from_firmware(struct pci_dev *dev);
-extern void	pciehp_get_hp_params_from_firmware(struct pci_dev *dev,
-	       	struct hotplug_params *hpp);
 
 
 
@@ -286,4 +277,19 @@ struct hpc_ops {
 	int	(*check_lnk_status)	(struct controller *ctrl);
 };
 
+
+#ifdef CONFIG_ACPI
+#define pciehp_get_hp_hw_control_from_firmware(dev) \
+	pciehp_acpi_get_hp_hw_control_from_firmware(dev)
+static inline int pciehp_get_hp_params_from_firmware(struct pci_dev *dev,
+			struct hotplug_params *hpp)
+{
+	if (ACPI_FAILURE(acpi_get_hp_params_from_firmware(dev, hpp)))
+		return -ENODEV;
+	return 0;
+}
+#else
+#define pciehp_get_hp_hw_control_from_firmware(dev) 	0
+#define pciehp_get_hp_params_from_firmware(dev, hpp)    (-ENODEV)
+#endif 				/* CONFIG_ACPI */
 #endif				/* _PCIEHP_H */
drivers/pci/hotplug/pciehp_hpc.c +73 -1

86 lines not on this page · raw message

drivers/pci/hotplug/pciehprm_acpi.c deleted +0 -257

257 lines not on this page · raw message

drivers/pci/hotplug/pciehprm_nonacpi.c deleted +0 -47

47 lines not on this page · raw message

drivers/pci/hotplug/shpchp.h +19 -11
@@ -106,12 +106,6 @@ struct controller {
 	volatile int cmd_busy;
 };
 
-struct hotplug_params {
-	u8	cache_line_size;
-	u8	latency_timer;
-	u8	enable_serr;
-	u8	enable_perr;
-};
 
 /* Define AMD SHPC ID  */
 #define PCI_DEVICE_ID_AMD_GOLAM_7450	0x7450 
@@ -193,15 +187,29 @@ extern u8	shpchp_handle_power_fault(u8 h
 extern int	shpchp_save_config(struct controller *ctrl, int busnumber, int num_ctlr_slots, int first_device_num);
 extern int	shpchp_configure_device(struct slot *p_slot);
 extern int	shpchp_unconfigure_device(struct slot *p_slot);
-extern void	get_hp_hw_control_from_firmware(struct pci_dev *dev);
-extern void	get_hp_params_from_firmware(struct pci_dev *dev,
-		struct hotplug_params *hpp);
-extern int	shpchprm_get_physical_slot_number(struct controller *ctrl,
-		u32 *sun, u8 busnum, u8 devnum);
 extern void	shpchp_remove_ctrl_files(struct controller *ctrl);
 extern void	cleanup_slots(struct controller *ctrl);
 extern void	queue_pushbutton_work(void *data);
 
+
+#ifdef CONFIG_ACPI
+static inline int get_hp_params_from_firmware(struct pci_dev *dev,
+			struct hotplug_params *hpp)
+{
+	if (ACPI_FAILURE(acpi_get_hp_params_from_firmware(dev, hpp)))
+			return -ENODEV;
+	return 0;
+}
+#define get_hp_hw_control_from_firmware(pdev) \
+	do { \
+		if (DEVICE_ACPI_HANDLE(&(pdev->dev))) \
+			acpi_run_oshp(DEVICE_ACPI_HANDLE(&(pdev->dev))); \
+	} while (0)
+#else
+#define get_hp_params_from_firmware(dev, hpp) (-ENODEV)
+#define get_hp_hw_control_from_firmware(dev) do { } while (0)
+#endif
+
 struct ctrl_reg {
 	volatile u32 base_offset;
 	volatile u32 slot_avail1;
drivers/pci/hotplug/shpchp_core.c +17 -0
@@ -104,6 +104,23 @@ static void make_slot_name(struct slot *
 		 slot->bus, slot->number);
 }
 
+
+
+
+static int
+shpchprm_get_physical_slot_number(struct controller *ctrl, u32 *sun,
+				u8 busnum, u8 devnum)
+{
+	int offset = devnum - ctrl->slot_device_offset;
+
+	dbg("%s: ctrl->slot_num_inc %d, offset %d\n", __FUNCTION__,
+			ctrl->slot_num_inc, offset);
+	*sun = (u8) (ctrl->first_slot + ctrl->slot_num_inc *offset);
+	return 0;
+}
+
+
+
 static int init_slots(struct controller *ctrl)
 {
 	struct slot *slot;
drivers/pci/hotplug/shpchprm_acpi.c deleted +0 -186

186 lines not on this page · raw message

drivers/pci/hotplug/shpchprm_legacy.c deleted +0 -54

54 lines not on this page · raw message

drivers/pci/hotplug/shpchprm_nonacpi.c deleted +0 -57

57 lines not on this page · raw message

drivers/pci/hotplug/shpchp_pci.c +8 -2
@@ -38,7 +38,7 @@ static void program_fw_provided_values(s
 {
 	u16 pci_cmd, pci_bctl;
 	struct pci_dev *cdev;
-	struct hotplug_params hpp = {0x8, 0x40, 0, 0}; /* defaults */
+	struct hotplug_params hpp;
 
 	/* Program hpp values for this device */
 	if (!(dev->hdr_type == PCI_HEADER_TYPE_NORMAL ||
@@ -46,7 +46,13 @@ static void program_fw_provided_values(s
 			(dev->class >> 8) == PCI_CLASS_BRIDGE_PCI)))
 		return;
 
-	get_hp_params_from_firmware(dev, &hpp);
+	/* use default values if we can't get them from firmware */
+	if (get_hp_params_from_firmware(dev, &hpp)) {
+		hpp.cache_line_size = 8;
+		hpp.latency_timer = 0x40;
+		hpp.enable_serr = 0;
+		hpp.enable_perr = 0;
+	}
 
 	pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, hpp.cache_line_size);
 	pci_write_config_byte(dev, PCI_LATENCY_TIMER, hpp.latency_timer);
drivers/pci/hotplug/acpiphp.h +1 -14
@@ -64,19 +64,6 @@ struct slot {
 	struct acpiphp_slot	*acpi_slot;
 };
 
-/**
- * struct hpp_param - ACPI 2.0 _HPP Hot Plug Parameters
- * @cache_line_size in DWORD
- * @latency_timer in PCI clock
- * @enable_SERR 0 or 1
- * @enable_PERR 0 or 1
- */
-struct hpp_param {
-	u8 cache_line_size;
-	u8 latency_timer;
-	u8 enable_SERR;
-	u8 enable_PERR;
-};
 
 
 /**
@@ -100,7 +87,7 @@ struct acpiphp_bridge {
 	struct pci_dev *pci_dev;
 
 	/* ACPI 2.0 _HPP parameters */
-	struct hpp_param hpp;
+	struct hotplug_params hpp;
 
 	spinlock_t res_lock;
 };