bootm sets wrong Machine ID for at91rm9200dk
After bootm (u-boot 1.1.4), kernel 2.6.15.6 hangs. The reason is the Machine Id (in r1) is 0xfb, but the kernel expects 0x106 (at91rm9200dk). Which file should be edited in u-boot?
Note: I'm not the only one who face the problem.
Regards
Andrew Zhukov
Quoted 5 lines
After bootm (u-boot 1.1.4), kernel 2.6.15.6 hangs. The reason is the Machine Id (in r1) is
0xfb, but the kernel expects0x106(at91rm9200dk). Which file should be edited in u-boot?
Note: I'm not the only one who face the problem.
Andrew
take a look atboard/at91rm9200dk/at91rm9200dk.c
function board_init()MACH_TYPE_AT91RM9200
Signature · 4 lines
Marco Cavallini Koan s.a.s. - Bergamo - ITALIA Embedded and Real-Time Software Engineering www.koansoftware.com | www.klinux.org
Quoted 10 lines · Marco Cavallini
Quoted 5 lines
After bootm (u-boot 1.1.4), kernel 2.6.15.6 hangs. The reason is the Machine Id (in r1) is
0xfb, but the kernel expects0x106(at91rm9200dk). Which file should be edited in u-boot?
Note: I'm not the only one who face the problem.Andrew
take a look atboard/at91rm9200dk/at91rm9200dk.c
functionboard_init()MACH_TYPE_AT91RM9200
Thanks! I changed the line 60 in board/at91rm9200dk/at91rm9200dk.c and the kernel starts all right.
The change is:
/* arch number of AT91RM9200DK-Board */
- gd->bd->bi_arch_number = MACH_TYPE_AT91RM9200;
+ gd->bd->bi_arch_number = MACH_TYPE_AT91RM9200DK;
Thanks to all who replied!
Quoted 2 lines · In message <[email protected]> you wrote:
The change is:
So will you please submit a proper patch? See the README for instructions!
Best regards,
Wolfgang Denk
Signature · 4 lines
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Wenn Du ein' weise Antwort verlangst, Mu?t Du vern?nftig fragen.
-- Goethe, Invektiven