serial8250: set divisor register correctly for AMD Alchemy SoC uart
Subsystems (2)
PATCH 1/1 serial8250: set divisor register correctly for AMD Alchemy SoC uart
Alchemy SoC uart have got a non-standard divisor register that needs some special handling.
This patch adds divisor read/write functions with test and special handling for Alchemy internal uart.
---
drivers/serial/8250.c renamed from drivers/serial/8250.c.orig +48 -21
@@ -362,6 +362,40 @@ serial_out(struct uart_8250_port *up, in#define serial_inp (up, offset) serial_in(up, offset)#define serial_outp (up, offset, value) serial_out(up, offset, value) +/* Uart divisor latch read */ +static inline int _serial_dl_read (struct uart_8250_port *up) +{ +return serial_inp (up,UART_DLL ) |serial_inp (up,UART_DLM ) <<8 ; +} + +/* Uart divisor latch write */ +static inline void _serial_dl_write (struct uart_8250_port *up,int value) +{ +serial_outp (up,UART_DLL , value &0xff ); +serial_outp (up,UART_DLM , value >>8 &0xff ); +} + +#ifdef CONFIG_SERIAL_8250_AU1X00 +/* Au1x00 haven't got a standard divisor latch */ +static int serial_dl_read (struct uart_8250_port *up) +{ +if (up->port.iotype ==UPIO_AU ) +return __raw_readl (up->port.membase +0x28 ); +else +return _serial_dl_read (up); +} + +static void serial_dl_write (struct uart_8250_port *up,int value) +{ +if (up->port.iotype ==UPIO_AU ) +__raw_writel (value, up->port.membase +0x28 ); +else +_serial_dl_write (up, value); +} +#else +#define serial_dl_read (up) _serial_dl_read(up) +#define serial_dl_write (up, value) _serial_dl_write(up, value) +#endif /* * For the 16C950
@@ -494,7 +528,8 @@ static void disable_rsa(struct uart_8250*/ static int size_fifo (struct uart_8250_port *up) { -unsigned char old_fcr, old_mcr, old_dll, old_dlm, old_lcr; +unsigned char old_fcr, old_mcr, old_lcr; +unsigned short old_dl;int count; old_lcr =serial_inp (up,UART_LCR );
@@ -505,10 +540,8 @@ static int size_fifo(struct uart_8250_po UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);serial_outp (up,UART_MCR ,UART_MCR_LOOP );serial_outp (up,UART_LCR ,UART_LCR_DLAB ); - old_dll =serial_inp (up,UART_DLL ); - old_dlm =serial_inp (up,UART_DLM ); -serial_outp (up,UART_DLL ,0x01 ); -serial_outp (up,UART_DLM ,0x00 ); + old_dl =serial_dl_read (up); +serial_dl_write (up,0x0001 );serial_outp (up,UART_LCR ,0x03 );for (count =0 ; count <256 ; count++)serial_outp (up,UART_TX , count);
@@ -519,8 +552,7 @@ static int size_fifo(struct uart_8250_poserial_outp (up,UART_FCR , old_fcr);serial_outp (up,UART_MCR , old_mcr);serial_outp (up,UART_LCR ,UART_LCR_DLAB ); -serial_outp (up,UART_DLL , old_dll); -serial_outp (up,UART_DLM , old_dlm); +serial_dl_write (up, old_dl);serial_outp (up,UART_LCR , old_lcr);return count;
@@ -533,22 +565,20 @@ static int size_fifo(struct uart_8250_po*/ static unsigned int autoconfig_read_divisor_id (struct uart_8250_port *p) { -unsigned char old_dll, old_dlm, old_lcr; +unsigned char old_lcr;unsigned int id; +unsigned short old_dl; old_lcr =serial_inp (p,UART_LCR );serial_outp (p,UART_LCR ,UART_LCR_DLAB ); - old_dll =serial_inp (p,UART_DLL ); - old_dlm =serial_inp (p,UART_DLM ); + old_dl =serial_dl_read (p); -serial_outp (p,UART_DLL ,0 ); -serial_outp (p,UART_DLM ,0 ); +serial_dl_write (p,0 ); - id =serial_inp (p,UART_DLL ) |serial_inp (p,UART_DLM ) <<8 ; + id =serial_dl_read (p); -serial_outp (p,UART_DLL , old_dll); -serial_outp (p,UART_DLM , old_dlm); +serial_dl_write (p, old_dl);serial_outp (p,UART_LCR , old_lcr);return id;
@@ -750,8 +780,7 @@ static void autoconfig_16550a(struct uarserial_outp (up,UART_LCR ,0xE0 ); - quot =serial_inp (up,UART_DLM ) <<8 ; - quot +=serial_inp (up,UART_DLL ); + quot =serial_dl_read (up); quot <<=3 ; status1 =serial_in (up,0x04 );/* EXCR1 */
@@ -759,8 +788,7 @@ static void autoconfig_16550a(struct uar status1 |=0x10 ;/* 1.625 divisor for baud_base --> 921600 */ serial_outp (up,0x04 , status1); -serial_outp (up,UART_DLL , quot &0xff ); -serial_outp (up,UART_DLM , quot >>8 ); +serial_dl_write (up, quot);serial_outp (up,UART_LCR ,0 );
@@ -1862,8 +1890,7 @@ serial8250_set_termios(struct uart_portserial_outp (up,UART_LCR , cval |UART_LCR_DLAB );/* set DLAB */ } -serial_outp (up,UART_DLL , quot &0xff );/* LS of divisor */ -serial_outp (up,UART_DLM , quot >>8 );/* MS of divisor */ +serial_dl_write (up, quot);/* * LCR DLAB must be set to enable 64-byte FIFO mode. If the FCR
Quoted 5 lines · Jon Anders Haugum
Alchemy SoC uart have got a non-standard divisor register that needs some special handling.
This patch adds divisor read/write functions with test and special handling for Alchemy internal uart.
This doesn't apply to mainline anymore.
patching file drivers/serial/8250.c
Hunk #1 succeeded at 362 with fuzz 2.
Hunk #2 FAILED at 528.
Hunk #3 FAILED at 540.
Hunk #4 FAILED at 552.
Hunk #5 FAILED at 565.
Hunk #6 FAILED at 780.
Hunk #7 FAILED at 788.
Hunk #8 succeeded at 1890 with fuzz 2.
6 out of 8 hunks FAILED -- saving rejects to file drivers/serial/8250.c.rej
Please resend.
Signature · 3 lines
Russell King Linux kernel 2.6 ARM Linux - http://www.arm.linux.org.uk/ maintainer of: 2.6 Serial core
socket error
Hi all ,
Below iam trying to run ftp server daemon ,
it gave below message ,
# ./ftpd 421 Cannot getsockname( STDIN ), errno=95 May 6 05:55:54 in.ftpd[48]: Cannot getsockname( STDIN ): Socket operation on nt#
any idea about this error .
Regards
Gowri
Re: socket error
Quoted 10 lines · Gowri Satish Adimulam
Hi all ,
Below iam trying to run ftp server daemon ,
it gave below message ,# ./ftpd 421 Cannot getsockname( STDIN ), errno=95 May 6 05:55:54 in.ftpd[48]: Cannot getsockname( STDIN ): Socket operation on nt#any idea about this error .
Yes... two suggestions:
(1) You'll get _much_ better support if you ask the right people -- try reading the documentation for that FTP daemon -- it should mention who to contact regarding bugs there.
(2) It looks like it's expecting to be run from inetd/xinetd -- perhaps that's worth a try?
This list has nothing to do with FTP daemons -- unless you're having problems getting to ftp.linux-mips.org -- then we might have something to do with it. But otherwise, it's really not our issue.
Signature · 7 lines
Stuart Longland (aka Redhatter) .'''. Gentoo Linux/MIPS Cobalt and Docs Developer '.'` : . . . . . . . . . . . . . . . . . . . . . . .'.' http://dev.gentoo.org/~redhatter :.' International Asperger's Year (1906 ~ 2006) http://dev.gentoo.org/~redhatter/iay