2.6.16-rt11 and low-latency audio xruns (interrupt latency problem?)
Hi,
I'm getting xruns while trying to do low-latency capture/playback of audio. After enabling the alsa debug options, I'm seeing errors like these in my logs:
[66205.003000] Unexpected hw_pointer value [1] (stream = 0, delta: -3, max jitter = 16): wrong interrupt acknowledge? [66205.003000] [<f0ae2ec1>] snd_pcm_period_elapsed+0x136/0x27a [snd_pcm] (8) [66205.003000] [<f0af7780>] snd_intel8x0_interrupt+0x18d/0x1e5 [snd_intel8x0] (20) [66205.003000] [<b013495b>] handle_IRQ_event+0x4e/0xb6 (44) [66205.003000] [<b0135443>] thread_edge_irq+0x6f/0xc4 (48) [66205.003000] [<b0135519>] do_irqd+0x0/0x8a (16) [66205.003000] [<b01354d8>] do_hardirq+0x40/0x81 (4) [66205.003000] [<b0135575>] do_irqd+0x5c/0x8a (16) [66205.003000] [<b01261f6>] kthread+0x79/0xa3 (16) [66205.003000] [<b012617d>] kthread+0x0/0xa3 (24) [66205.003000] [<b0101319>] kernel_thread_helper+0x5/0xb (16) [66205.004000] XRUN: pcmC0D0p [66205.004000] [<f0ae2f72>] snd_pcm_period_elapsed+0x1e7/0x27a [snd_pcm] (8) [66205.004000] [<f0af7780>] snd_intel8x0_interrupt+0x18d/0x1e5 [snd_intel8x0] (24) [66205.004000] [<b013495b>] handle_IRQ_event+0x4e/0xb6 (44) [66205.004000] [<b0135443>] thread_edge_irq+0x6f/0xc4 (48) [66205.004000] [<b0135519>] do_irqd+0x0/0x8a (16) [66205.004000] [<b01354d8>] do_hardirq+0x40/0x81 (4) [66205.004000] [<b0135575>] do_irqd+0x5c/0x8a (16) [66205.004000] [<b01261f6>] kthread+0x79/0xa3 (16) [66205.004000] [<b012617d>] kthread+0x0/0xa3 (24) [66205.004000] [<b0101319>] kernel_thread_helper+0x5/0xb (16)
The only info I could get after searching for a while is that the "Unexpected hw_pointer value" *could* be related to the audio interrupt being serviced too late
(http://www.ussg.iu.edu/hypermail/linux/kernel/0407.1/1613.html).
However, I'm running the audio IRQ (IRQ 16) at priority 99 and my app at 98 (I also tried the opposite and get the same result). In this case, I'm running with two periods of 16 samples each (48 kHz), but I've seen that error occur with periods up to 64 samples.
Any idea how to fix/further investigate that? My machine is a Dell D600 laptop with a Pentium-M 2.13 GHz, which I'm running at full-speed (performance governor). Kernel is stock 2.6.16 + rt11 patch. Distro is Ubuntu 5.10, kernel is not tainted.
Thanks,
Jean-Marc
P.S. Please include me in CC since I'm not subscribed to lkml.
Quoted 4 lines · Marsfield)
In this case,
I'm running with two periods of 16 samples each (48 kHz), but I've seen
that error occur with periods up to 64 samples.
It's possible that your hardware simply isn't capable of this and you'll have to get a multichannel soundcard (more channels means you can use a smaller buffer before hitting the lower limit of a PCI transfer) or use a period of 128 samples or more.
Lee
Quoted 6 lines
It's possible that your hardware simply isn't capable of this and you'll have to get a multichannel soundcard (more channels means you can use a smaller buffer before hitting the lower limit of a PCI transfer) or use a period of 128 samples or more.
From the ALSA verbose mode, I can see that the hardware does accept as
low as 8 samples per period -- and it actually works outside of the few xruns per minute.
Jean-Marc
Quoted 4 lines · Marsfield)
Quoted 4 lines
It's possible that your hardware simply isn't capable of this and you'll have to get a multichannel soundcard (more channels means you can use a smaller buffer before hitting the lower limit of a PCI transfer) or use a period of 128 samples or more.
Could you give me more info on that PCI transfer limit? I couldn't find any reference to that on the web. Also, any way to see if that's the real cause of the problem. I've been doing some experiments and noticed that the percentage or xruns I get is almost independent of the period size, which is a little odd. Any idea?
Jean-Marc