Core-iSCSI/Nokia770 binaries released!
Greetings all,
A Maemo formatted .deb binary for Core-iSCSI/Nokia770 has been released on the wiki-homepage at linux-iscsi.org:
http://www.linux-iscsi.org/index.php/Core-iSCSI/Nokia_770
The files can be located directly at:
http://www.linux-iscsi.org/files/core-iscsi-maemo/core-iscsi-maemo-v10_arm.deb
http://www.linux-iscsi.org/files/core-iscsi-maemo/README
The only two requirements that currently exist (as listed in the README) are 1) bash, and 2) obtaining superuser privledges on the device to be able to load kernel modules, mount iSCSI LUNs, etc.
The only two limitiations that currently exist are 1) Authentication is not supported in this release and 2) the 2.6.12.3-omap1 for the 770 does NOT ship with CONFIG_SCSI_MULTI_LUN=y, and hence we are only able to detect LUN 0 for each iSCSI Target Node. Unfortuately scsi_mod is complied directly the 2.6.12.3-omap1 kernel and the only method to get around this is recompiling the kernel. I would like to see scsi_mod built as a module in future kernel releases for the Nokia 770, and preferably with CONFIG_SCSI_MULTI_LUN=y enabled.
Also, now that the Core-iSCSI/Nokia770 project has made the first binary release, its now time to start discussion what the plans are for the iSCSI UI on the Nokia770. I will be writing down some ideas for this on the wiki homepage, and would be interested in getting some feedback on some of the possibilies for making iSCSI easy to use on small devices.
Have fun!
Signature · 1 line
Nicholas A. Bellinger <[email protected]>
Hi -
Quoted 7 lines · Nicholas A. Bellinger
not supported in this release and 2) the 2.6.12.3-omap1 for the 770 does NOT ship with
CONFIG_SCSI_MULTI_LUN=y, and hence we are only able to detect LUN 0 for each iSCSI Target Node. Unfortuatelyscsi_modis complied directly the 2.6.12.3-omap1 kernel and the only method to get around this is recompiling the kernel. I would like to seescsi_modbuilt as a module in future kernel releases for the Nokia 770, and preferably withCONFIG_SCSI_MULTI_LUN=yenabled.
You should be able to override that via
scsi_mod.max_luns=512
Or does it have a fixed boot command line?
-- Patrick Mansfield
A quick followup..
Quoted 10 lines · Nicholas A. Bellinger
The only two limitiations that currently exist are 1) Authentication is not supported in this release and 2) the 2.6.12.3-omap1 for the 770 does NOT ship with
CONFIG_SCSI_MULTI_LUN=y, and hence we are only able to detect LUN 0 for each iSCSI Target Node. Unfortuatelyscsi_modis complied directly the 2.6.12.3-omap1 kernel and the only method to get around this is recompiling the kernel. I would like to seescsi_modbuilt as a module in future kernel releases for the Nokia 770, and preferably withCONFIG_SCSI_MULTI_LUN=yenabled.
Patrick Mansfield mentioned that the following will fix limitiation #2 mentioned above:
echo 512 > /sys/module/scsi_mod/parameters/max_luns
This applies to other vendor's kernels as well, so I will go ahead and made sure that this is set correctly when /etc/init.d/initiator is started. I will put a new .deb up shortly, as well as include this into the next release of core-iscsi-tools.
Thanks again Patrick!
Signature · 1 line
Nicholas A. Bellinger <[email protected]>