Skip to contentSkip to conversation

CF card support issue

U-Boot-Users tqiu 1 participant 1 message Apr 10, 2006

lore
Share & tools
lore

tqiu

author
#0 lore raw

Hello all,

I support the CF card in u-boot, and met this issue:
I used the memory mapped addressing.
When set 0xE0(use LBA) to the Drive/Head Register, then read it, it was set 0xE0 correctly.
Then I need check the status of the CF card, read the STATUS
Register, It always 0x51(ready to accept cmd, card ready, something error).
Then I read the Error Register it always 0x04(cmd aborted or invalid
cmd). But that configuration was not a cmd.

Why it always got this error? Does someone ever seed this? Some
suggests?

Thank you very much!

Terry