ide-cd.c, "MEDIUM_ERROR" handling
I recently bought a DVD drive which appears to not retry enough when it's having trouble reading a disc - I'm requesting an option (or changing the default behavior) so that this drive is actually usable with the Linux ide-cd drivers - specificly, the code:
} else if (sense_key == MEDIUM_ERROR) {
/* No point in re-trying a zillion times on a bad
* sector... If we got here the error is not correctable */
ide_dump_status (drive, "media error (bad sector)", stat);
do_end_request = 1;
}needs to be disabled for my drive to read CDs properly.
With this code enabled, no retries are made, and the kernel sees medium errors and returns bad data to the application reading; without it, the kernel retries transparently and reads the data perfectly. So, I think the comment is assuming decent hardware, which unfortunately isn't always what we have :/
I can make the patch for conditionally enabling/disabling it if needed. I think it may make more sense to retry by default, but I don't know the general state of modern cheap CD/DVD drives either. It seems like it's a corner case on hardware that does re-try a zillion times, though, so probably won't greatly affect that hardware like it does the hardware that doesn't re-try a zillion times.
I'm not on the list currently, so please CC me with any replies.
Signature · 1 line
Zinx Verituse http://zinx.xmms.org/
Quoted 2 lines · Zinx Verituse
I recently bought a DVD drive which appears to not retry enough when it's having trouble reading a disc
Different to everything else I've ever met. You might want to check if its got PC firmware or is actually from a set of drives that were meant to be supplied in DVD players and similar.
Quoted 4 lines
With this code enabled, no retries are made, and the kernel sees medium errors and returns bad data to the application reading; without it, the kernel retries transparently and reads the data perfectly. So, I think the comment is assuming decent hardware, which unfortunately isn't always what we have :/
Use ide-scsi or the new libata drivers, either will do retries on medium errors.
Alan
Quoted 10 lines · Zinx Verituse
I recently bought a DVD drive which appears to not retry enough when it's having trouble reading a disc - I'm requesting an option (or changing the default behavior) so that this drive is actually usable with the Linux ide-cd drivers - specificly, the code:
} else if (sense_key == MEDIUM_ERROR) { /* No point in re-trying a zillion times on a bad * sector... If we got here the error is not correctable */ ide_dump_status (drive, "media error (bad sector)", stat); do_end_request = 1; }
Quoted 5 lines
needs to be disabled for my drive to read CDs properly.
With this code enabled, no retries are made, and the kernel sees medium errors and returns bad data to the application reading;
It would be a kernel bug if it returns bad data. It should return an error code to the application.
- The device should implement a decent retry strategy.
- There are special forensic applications which can be tuned to re-read bad sectors multiple times if needed.
Quoted 11 lines · Zinx Verituse
I recently bought a DVD drive which appears to not retry enough when it's having trouble reading a disc - I'm requesting an option (or changing the default behavior) so that this drive is actually usable with the Linux ide-cd drivers - specificly, the code:
} else if (sense_key == MEDIUM_ERROR) { /* No point in re-trying a zillion times on a bad * sector... If we got here the error is not correctable */ ide_dump_status (drive, "media error (bad sector)", stat); do_end_request = 1; }needs to be disabled for my drive to read CDs properly.
When I originally added this code, the problem I was seeing was the ide layer was doing 8 retires before it returned to ide-cd, which then did 8 retries itself. Thus processing a bad sector caused no less than 64 reads of the bad sector, all of which failed, and each of which took a fair amount of time, thereby keeping user space stuck in D state for over 10 minutes on a single syscall, which seemed rather bad form...
When I added this code, I was relying on the ide layer to continue to do its ritualistic 8 retries, after which I assumed that no further retries would be likely to help and there was no reason for ide-cd to keep thrashing on the already proven to be dead sector. For my purposes, this helped considerably reduce the amount of time stuck in D state while processing CDs with bad sectors (such as trying to recover the data off my kid's massively scratched up game CDs).
-Erik
--
Erik B. Andersen http://codepoet-consulting.com/
--This message was written using 73% post-consumer electrons--