Skip to contentSkip to conversation

tg3: Add reset_phy parameter to chip reset functions

PATCH Applied Michael Chan 2 participants 3 messages Apr 29, 2006 – May 1, 2006

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 4/6 tg3: Add reset_phy parameter to chip reset functions

Add a reset_phy parameter to tg3_reset_hw() and tg3_init_hw(). With the full chip reset during MAC address change, the automatic PHY reset during chip reset will cause a link down and bonding will not work properly as a result. With this reset_phy parameter, we can do a chip reset without link down when changing MAC address or MTU.

drivers/net/tg3.c +17 -17
index 0ccfb63..97e27d8 100644
@@ -3544,7 +3544,7 @@ static irqreturn_t tg3_test_isr(int irq,
 	return IRQ_RETVAL(0);
 }
 
-static int tg3_init_hw(struct tg3 *);
+static int tg3_init_hw(struct tg3 *, int);
 static int tg3_halt(struct tg3 *, int, int);
 
 #ifdef CONFIG_NET_POLL_CONTROLLER
@@ -3580,7 +3580,7 @@ static void tg3_reset_task(void *_data)
 	tp->tg3_flags2 &= ~TG3_FLG2_RESTART_TIMER;
 
 	tg3_halt(tp, RESET_KIND_SHUTDOWN, 0);
-	tg3_init_hw(tp);
+	tg3_init_hw(tp, 1);
 
 	tg3_netif_start(tp);
 
@@ -4055,7 +4055,7 @@ static int tg3_change_mtu(struct net_dev
 
 	tg3_set_mtu(dev, tp, new_mtu);
 
-	tg3_init_hw(tp);
+	tg3_init_hw(tp, 0);
 
 	tg3_netif_start(tp);
 
@@ -5740,7 +5740,7 @@ static int tg3_set_mac_addr(struct net_d
 		tg3_full_lock(tp, 1);
 
 		tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
-		tg3_init_hw(tp);
+		tg3_init_hw(tp, 0);
 
 		tg3_netif_start(tp);
 		tg3_full_unlock(tp);
@@ -5798,7 +5798,7 @@ static void __tg3_set_coalesce(struct tg
 }
 
 /* tp->lock is held. */
-static int tg3_reset_hw(struct tg3 *tp)
+static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
 {
 	u32 val, rdmac_mode;
 	int i, err, limit;
@@ -5813,7 +5813,7 @@ static int tg3_reset_hw(struct tg3 *tp)
 		tg3_abort_hw(tp, 1);
 	}
 
-	if (tp->tg3_flags2 & TG3_FLG2_MII_SERDES)
+	if ((tp->tg3_flags2 & TG3_FLG2_MII_SERDES) && reset_phy)
 		tg3_phy_reset(tp);
 
 	err = tg3_chip_reset(tp);
@@ -6354,7 +6354,7 @@ static int tg3_reset_hw(struct tg3 *tp)
 		tw32(GRC_LOCAL_CTRL, tp->grc_local_ctrl);
 	}
 
-	err = tg3_setup_phy(tp, 1);
+	err = tg3_setup_phy(tp, reset_phy);
 	if (err)
 		return err;
 
@@ -6427,7 +6427,7 @@ static int tg3_reset_hw(struct tg3 *tp)
 /* Called at device open time to get the chip ready for
  * packet processing.  Invoked with tp->lock held.
  */
-static int tg3_init_hw(struct tg3 *tp)
+static int tg3_init_hw(struct tg3 *tp, int reset_phy)
 {
 	int err;
 
@@ -6440,7 +6440,7 @@ static int tg3_init_hw(struct tg3 *tp)
 
 	tw32(TG3PCI_MEM_WIN_BASE_ADDR, 0);
 
-	err = tg3_reset_hw(tp);
+	err = tg3_reset_hw(tp, reset_phy);
 
 out:
 	return err;
@@ -6710,7 +6710,7 @@ static int tg3_test_msi(struct tg3 *tp)
 	tg3_full_lock(tp, 1);
 
 	tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
-	err = tg3_init_hw(tp);
+	err = tg3_init_hw(tp, 1);
 
 	tg3_full_unlock(tp);
 
@@ -6775,7 +6775,7 @@ static int tg3_open(struct net_device *d
 
 	tg3_full_lock(tp, 0);
 
-	err = tg3_init_hw(tp);
+	err = tg3_init_hw(tp, 1);
 	if (err) {
 		tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
 		tg3_free_rings(tp);
@@ -7866,7 +7866,7 @@ static int tg3_set_ringparam(struct net_
 
 	if (netif_running(dev)) {
 		tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
-		tg3_init_hw(tp);
+		tg3_init_hw(tp, 1);
 		tg3_netif_start(tp);
 	}
 
@@ -7911,7 +7911,7 @@ static int tg3_set_pauseparam(struct net
 
 	if (netif_running(dev)) {
 		tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
-		tg3_init_hw(tp);
+		tg3_init_hw(tp, 1);
 		tg3_netif_start(tp);
 	}
 
@@ -8549,7 +8549,7 @@ static int tg3_test_loopback(struct tg3 
 	if (!netif_running(tp->dev))
 		return TG3_LOOPBACK_FAILED;
 
-	tg3_reset_hw(tp);
+	tg3_reset_hw(tp, 1);
 
 	if (tg3_run_loopback(tp, TG3_MAC_LOOPBACK))
 		err |= TG3_MAC_LOOPBACK_FAILED;
@@ -8623,7 +8623,7 @@ static void tg3_self_test(struct net_dev
 		tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
 		if (netif_running(dev)) {
 			tp->tg3_flags |= TG3_FLAG_INIT_COMPLETE;
-			tg3_init_hw(tp);
+			tg3_init_hw(tp, 1);
 			tg3_netif_start(tp);
 		}
 
@@ -11599,7 +11599,7 @@ static int tg3_suspend(struct pci_dev *p
 		tg3_full_lock(tp, 0);
 
 		tp->tg3_flags |= TG3_FLAG_INIT_COMPLETE;
-		tg3_init_hw(tp);
+		tg3_init_hw(tp, 1);
 
 		tp->timer.expires = jiffies + tp->timer_offset;
 		add_timer(&tp->timer);
@@ -11633,7 +11633,7 @@ static int tg3_resume(struct pci_dev *pd
 	tg3_full_lock(tp, 0);
 
 	tp->tg3_flags |= TG3_FLAG_INIT_COMPLETE;
-	tg3_init_hw(tp);
+	tg3_init_hw(tp, 1);
 
 	tp->timer.expires = jiffies + tp->timer_offset;
 	add_timer(&tp->timer);
maintainer Applied
#1 lore raw

From: "Michael Chan" <[email protected]>
Date: Fri, 28 Apr 2006 16:36:08 -0700

Quoted 8 lines

Add a reset_phy parameter to tg3_reset_hw() and tg3_init_hw(). With the full chip reset during MAC address change, the automatic PHY reset during chip reset will cause a link down and bonding will not work properly as a result. With this reset_phy parameter, we can do a chip reset without link down when changing MAC address or MTU.

Applied.

Doesn't the signalling interface between the MAC and the PHY get reset during a chip reset and couldn't that cause problems if we bypass the PHY reset?

Thanks.

#2 lore raw
Quoted 9 lines · David S. Miller

From: "Michael Chan" <[email protected]>
Date: Fri, 28 Apr 2006 16:36:08 -0700

Quoted 6 lines

Add a reset_phy parameter to tg3_reset_hw() and tg3_init_hw(). With the full chip reset during MAC address change, the automatic PHY reset during chip reset will cause a link down and bonding will not work properly as a result. With this reset_phy parameter, we can do a chip reset without link down when changing MAC address or MTU.

Quoted 8 lines
Quoted 2 lines

Applied.

Doesn't the signalling interface between the MAC and the PHY get reset during a chip reset and couldn't that cause problems if we bypass the PHY reset?

The PHY reset is needed if the PHY was previously put into low power mode. In the cases where we reset the chip due to MTU or MAC address changes, the power settings are not changed and therefore PHY reset is not needed.