recover a pv from a disk with no partition table
I need to recover a PV from a disk with no partition table. I have a disk which gives EIO errors trying to read from the first few blocks of, so, no partition table.
Is there any way with LVM2, given that I have
the /etc/lvm/backup/<vgname> file that I can determine the offset into the disk where the partition starts, so that I could do:
# losetup -o <offset> /dev/loop2 /dev/hde
to get the PV on /dev/loop2 and then be able to activate it with vgchange and read it's LVs?
gpart tells me:
# losetup -o $((512*8)) /dev/loop2 /dev/hde # gpart -vg /dev/loop2
dev(/dev/loop2) mss(512)
* Warning: strange partition table magic 0x0000.
...
Begin scan...
Possible partition(Linux ext2), size(19mb), offset(0mb)
type: 131(0x83)(Linux ext2 filesystem)
size: 19mb #s(39248) s(55-39302)
chs: (1023/255/0)-(1023/255/0)d (0/0/0)-(0/0/0)r
hex: 00 FF C0 FF 83 FF C0 FF 37 00 00 00 50 99 00 00
Possible partition(Linux LVM physical volume), size(156315mb), offset(19mb)
type: 142(0x8E)(Linux LVM physical volume)
size: 156315mb #s(320133744) s(39304-320173047)
chs: (1023/255/0)-(1023/255/0)d (0/0/0)-(0/0/0)r
hex: 00 FF C0 FF 8E FF C0 FF 88 99 00 00 70 DA 14 13
Which looks right, but:
# losetup -o $((512*39304)) /dev/loop3 /dev/hde # vgscan
Yields no new volume groups. Neither does the above with 512*39303 or 512*39305 so it doesn't seem to be an off-by-one. Nor does any of 512*(39303-8), 512*(39304-8), 512*(39305-8) to account for the fact that loop2 (which the gpart was done on originally) is 8 blocks into /dev/hde already.
Am I missing something?
Thanx,
b.
Signature · 3 lines
My other computer is your Microsoft Windows server. Brian J. Murrell
Quoted 7 lines · Brian J. Murrell
I need to recover a PV from a disk with no partition table. I have a disk which gives EIO errors trying to read from the first few blocks of, so, no partition table.
Is there any way with LVM2, given that I have
the /etc/lvm/backup/<vgname> file that I can determine the offset into the disk where the partition starts, so that I could do:
The backup files don't list physical offsets. You'll have to figure that out yourself. But, you can see the id's for the partitions, and the lvm header is at offset 0x200 into the partition.
Dave
Quoted 10 lines · David Brown
Quoted 7 lines · Brian J. Murrell
I need to recover a PV from a disk with no partition table. I have a disk which gives EIO errors trying to read from the first few blocks of, so, no partition table.
Is there any way with LVM2, given that I have
the /etc/lvm/backup/<vgname> file that I can determine the offset into the disk where the partition starts, so that I could do:The backup files don't list physical offsets.
Indeed. That's why I used gpart, without success.
Quoted 2 lines
But, you can see the id's for the partitions, and the lvm header is at offset
0x200into the partition.
Yeah, I did notice that on another pv on the system:
# hexdump -C /dev/sda2 | less 00000000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 00000200 4c 41 42 45 4c 4f 4e 45 01 00 00 00 00 00 00 00 |LABELONE........| 00000210 ad 24 02 c2 20 00 00 00 4c 56 4d 32 20 30 30 31 |$. ...LVM2 001| 00000220 68 76 37 6b 4e 49 32 4e 72 5a 33 52 73 39 38 5a |hv7kNI2NrZ3Rs98Z| 00000230 42 65 73 33 53 76 4a 4c 75 68 61 4f 62 6a 53 36 |Bes3SvJLuhaObjS6|
Unfortunately, I am unable to find any "LABELONE" on the PV I am trying to recover. I'm getting a bad feeling that that means that the LVM (device mapper) mappings are gone. :-(
b.
Signature · 3 lines
My other computer is your Microsoft Windows server. Brian J. Murrell