Skip to contentSkip to conversation

CompactFlash TrueIDE with 1 chip select

U-Boot-Users Ben Warren 2 participants 2 messages May 9, 2006

lore
Share & tools
lore

Ben Warren

author
#0 lore raw

Hello,

I'm planning on using Compact Flash on an MPC8349 in True IDE mode, but only have one chip select line available. The local bus on this chip is for all intents and purposes the same as all of the 8xx/82xx chips that came before it. The plan is do some address decoding magic in a CPLD to provide two indirect chip selects.

Browsing through the U-boot code and some other boards using True IDE, I think this should work without much drama. Does anyone have comments or suggestions?

thanks,
Ben

#1 lore raw

This AN provides some useful information

http://www.toshiba.com/taec/components/ApplNote/TSB_CF-IBM_PPC405GP_030523.pdf

Regards,
llandre

DAVE Electronics System House - R&D Department

web:   http://www.dave-tech.it
email: r&d2 at dave-tech.it
Quoted 14 lines

Hello,

I'm planning on using Compact Flash on an MPC8349 in True IDE mode, but only have one chip select line available. The local bus on this chip is for all intents and purposes the same as all of the 8xx/82xx chips that came before it. The plan is do some address decoding magic in a CPLD to provide two indirect chip selects.

Browsing through the U-boot code and some other boards using True IDE, I think this should work without much drama. Does anyone have comments or suggestions?

thanks,
Ben