Can not mount compact flash drive hda (ext3) with 2.6.16
Hello List,
i am booting a linux box via NFS.
When it boot it with a 2.4.32 kernel i CAN mount my compact flash drive hda.
If i boot a 2.6.16 kernel i CAN NOT.
hdaX is ext3 and ext3 is compiled into the kernel. Am i missing a kernel option?
More infos:
~# fdisk -l
Disk /dev/hda: 1024 MB, 1024450560 bytes
32 heads, 63 sectors/track, 992 cylinders
Units = cylinders of 2016 * 512 = 1032192 bytes
Device Boot Start End Blocks Id System /dev/hda1 * 1 73 73552+ 83 Linux /dev/hda2 74 751 683424 83 Linux /dev/hda3 752 799 48384 83 Linux /dev/hda4 800 992 194544 83 Linux
~# mount
rootfs on / type rootfs (rw)/dev/root on / type nfs (rw,v2,rsize=4096,wsize=4096,hard,nolock,proto=udp,addr=192.168.1.252) proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
usbfs on /proc/bus/usb type usbfs (rw)/dev/root on /dev/.static/dev type nfs (rw,v2,rsize=4096,wsize=4096,hard,nolock,proto=udp,addr=192.168.1.252) none on /dev type tmpfs (rw)
tmpfs on /tmp type tmpfs (rw)
devpts on /dev/pts type devpts (rw)
tmpfs on /dev/shm type tmpfs (rw)
~# cat /proc/mounts
rootfs / rootfs rw 0 0/dev/root / nfs rw,v2,rsize=4096,wsize=4096,hard,nolock,proto=udp,addr=192.168.1.252 0 0 proc /proc proc rw 0 0
sysfs /sys sysfs rw 0 0
usbfs /proc/bus/usb usbfs rw 0 0/dev/root /dev/.static/dev nfs rw,v2,rsize=4096,wsize=4096,hard,nolock,proto=udp,addr=192.168.1.252 0 0 none /dev tmpfs rw 0 0
tmpfs /tmp tmpfs rw 0 0
devpts /dev/pts devpts rw 0 0
tmpfs /dev/shm tmpfs rw 0 0
~# lsof | grep hda
<no result>
~# dmesg | grep hda
ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:pio, hdb:pio
hda: TOSHIBA THNCF1G02PG, CFA DISK drive
hda: max request size: 128KiB
hda: 2000880 sectors (1024 MB) w/2KiB Cache, CHS=1985/16/63
hda: hda1 hda2 hda3 hda4
~# mount -t ext3 /dev/hda1 /mnt/
mount: /dev/hda1 already mounted or /mnt/ busy
~# mkfs.ext3 /dev/hda1
mke2fs 1.38 (30-Jun-2005)/dev/hda1 is apparently in use by the system; will not make a filesystem here!
Attachted is my kernel config of the 2.6.16 kernel.
Do you need more infos?
Thanks, Mario
Has nobody got an idea or hint?
Quoted 90 lines
Hello List,
i am booting a linux box via NFS.
When it boot it with a 2.4.32 kernel i CAN mount my compact flash drive hda.If i boot a 2.6.16 kernel i CAN NOT.
hdaX is ext3 and ext3 is compiled into the kernel. Am i missing a kernel option?
More infos:
~# fdisk -l
Disk
/dev/hda: 1024 MB, 1024450560 bytes
32 heads, 63 sectors/track, 992 cylinders
Units = cylinders of 2016 * 512 = 1032192 bytesDevice Boot Start End Blocks Id System /dev/hda1 * 1 73 73552+ 83 Linux /dev/hda2 74 751 683424 83 Linux /dev/hda3 752 799 48384 83 Linux /dev/hda4 800 992 194544 83 Linux~# mount
rootfs on / type rootfs (rw)/dev/rooton / type nfs (rw,v2,rsize=4096,wsize=4096,hard,nolock,proto=udp,addr=192.168.1.252) proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
usbfs on/proc/bus/usbtype usbfs (rw)/dev/rooton/dev/.static/devtype nfs (rw,v2,rsize=4096,wsize=4096,hard,nolock,proto=udp,addr=192.168.1.252) none on /dev type tmpfs (rw)
tmpfs on /tmp type tmpfs (rw)
devpts on/dev/ptstype devpts (rw)
tmpfs on/dev/shmtype tmpfs (rw)~# cat
/proc/mounts
rootfs / rootfs rw 0 0/dev/root/ nfs rw,v2,rsize=4096,wsize=4096,hard,nolock,proto=udp,addr=192.168.1.252 0 0 proc /proc proc rw 0 0
sysfs /sys sysfs rw 0 0
usbfs/proc/bus/usbusbfs rw 0 0/dev/root/dev/.static/devnfs rw,v2,rsize=4096,wsize=4096,hard,nolock,proto=udp,addr=192.168.1.252 0 0 none /dev tmpfs rw 0 0
tmpfs /tmp tmpfs rw 0 0
devpts/dev/ptsdevpts rw 0 0
tmpfs/dev/shmtmpfs rw 0 0~# lsof | grep hda
<no result>~# dmesg | grep hda
ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:pio, hdb:piohda: TOSHIBA THNCF1G02PG, CFA DISK drive
hda: max request size: 128KiB
hda: 2000880 sectors (1024 MB) w/2KiB Cache, CHS=1985/16/63
hda: hda1 hda2 hda3 hda4~# mount -t ext3
/dev/hda1/mnt/
mount:/dev/hda1already mounted or/mnt/busy~# mkfs.ext3
/dev/hda1
mke2fs 1.38 (30-Jun-2005)/dev/hda1is apparently in use by the system; will not make a filesystem here!Attachted is my kernel config of the 2.6.16 kernel.
Do you need more infos?
Thanks, Mario
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Quoted 25 lines · Mario Ohnewald
Hello List,
i am booting a linux box via NFS. When it boot it with a 2.4.32 kernel i CAN mount my compact flash drive hda.
If i boot a 2.6.16 kernel i CAN NOT.
hdaX is ext3 and ext3 is compiled into the kernel. Am i missing a kernel option?
More infos:
~# fdisk -l
Disk
/dev/hda: 1024 MB, 1024450560 bytes
32 heads, 63 sectors/track, 992 cylinders
Units = cylinders of 2016 * 512 = 1032192 bytesDevice Boot Start End Blocks Id System
/dev/hda1 * 1 73 73552+ 83 Linux /dev/hda2 74 751 683424 83 Linux /dev/hda3 752 799 48384 83 Linux /dev/hda4 800 992 194544 83 Linux
Quoted 17 lines
~# mount
rootfs on / type rootfs (rw)/dev/rooton / type nfs (rw,v2,rsize=4096,wsize=4096,hard,nolock,proto=udp,addr=192.168.1.252) proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
usbfs on/proc/bus/usbtype usbfs (rw)/dev/rooton/dev/.static/devtype nfs (rw,v2,rsize=4096,wsize=4096,hard,nolock,proto=udp,addr=192.168.1.252) none on /dev type tmpfs (rw)
tmpfs on /tmp type tmpfs (rw)
devpts on/dev/ptstype devpts (rw)
tmpfs on/dev/shmtype tmpfs (rw)
proc/mounts is the interesting one - the "mount" command gives you /etc/mtab which may be wrong.
Quoted 5 lines
~# cat
/proc/mounts
rootfs / rootfs rw 0 0/dev/root/ nfs rw,v2,rsize=4096,wsize=4096,hard,nolock,proto=udp,addr=192.168.1.252 0 0 proc /proc proc rw 0 0
Quoted 11 lines
sysfs /sys sysfs rw 0 0
usbfs/proc/bus/usbusbfs rw 0 0/dev/root/dev/.static/devnfs rw,v2,rsize=4096,wsize=4096,hard,nolock,proto=udp,addr=192.168.1.252 0 0 none /dev tmpfs rw 0 0
tmpfs /tmp tmpfs rw 0 0
devpts/dev/ptsdevpts rw 0 0
tmpfs/dev/shmtmpfs rw 0 0
no hda in use here
Quoted 11 lines
~# lsof | grep hda
<no result>~# dmesg | grep hda
ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:pio, hdb:pio
hda: TOSHIBA THNCF1G02PG, CFA DISK drive
hda: max request size: 128KiB
hda: 2000880 sectors (1024 MB) w/2KiB Cache, CHS=1985/16/63
hda: hda1 hda2 hda3 hda4
Quoted 4 lines
~# mount -t ext3
/dev/hda1/mnt/
mount:/dev/hda1already mounted or/mnt/busy
There is a hda, it is a 1GB disk, and it has four partitions. The four partitions are correct?
There are other ways hda1 could be busy, such as used for swap or member of a RAID array. But I guess this is not the case here?
Quoted 7 lines
~# mkfs.ext3
/dev/hda1
mke2fs 1.38 (30-Jun-2005)/dev/hda1is apparently in use by the system; will not make a filesystem here!
Well, you could try the -F (force) option and see what happens. Just make sure "hda1" doesn't somehow refer to another device in the system.
You may also want to try
cfdisk /dev/hda
and see that the partition layout is the same as with 2.4, and you might want to check if cat /dev/hda > /dev/null works. This is all very strange, but more data might get more people interested.
Helge Hafting