Why didn't the lv extension go through even if lvdisplay says so?
Hi all,
I want to allocate 140G of the free space in my VG and use it to extend /var (/dev/Volume00/LogVol01) from 97G to 240G. After I unmounted /var (which was impossible until I used a lazy 'umount - l /var'), I ran
# lvextend -L 240G /dev/Volume00/LogVol01 (unfortunately I was in single-user mode and wasn't able to save the output, but it basically said 'extension successful). I then re- mounted /var:
# mount /dev/mapper/Volume00-LogVol01 /var/ kjournald starting. Commit interval 5 seconds EXT3 FS on dm-2, internal journal EXT3-fs: mounted filesystem with ordered data mode.
and ran a df to check:
# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/cciss/c0d0p2 49G 19G 27G 42% /
/dev/cciss/c0d0p1 99M 9.8M 84M 11% /boot
/dev/mapper/Volume00-LogVol00
97G 84G 8.1G 92% /home
none 2.9G 0 2.9G 0% /dev/shm
/dev/mapper/Volume00-LogVol02
20G 11G 8.4G 56% /usr/local
sunrpc 97G 88G 3.6G 97% /var/lib/nfs/rpc_pipefs
/dev/mapper/Volume00-LogVol01
97G 88G 3.6G 97% /varTo my surprise /var hadn't been extended at all and a new sunrpc device had also been mounted! The lvm info is now:
# vgdisplay --- Volume group --- VG Name Volume00 System ID localhost.localdomain1077884666 Format lvm1 VG Access read/write VG Status resizable MAX LV 256 Cur LV 3 Open LV 3 Max PV 256 Cur PV 1 Act PV 1 VG Size 496.02 GB PE Size 4.00 MB Total PE 126981 Alloc PE / Size 91560 / 357.66 GB Free PE / Size 35421 / 138.36 GB VG UUID H0hRDH-Ud2L-fYSG-j1mE-3QfB-5xMo-3Sb6Mf
Thus 240G has been used up.
# lvdisplay --- Logical volume --- LV Name /dev/Volume00/LogVol01 VG Name Volume00 LV UUID 000000-0000-0000-0000-0000-0000-000002 LV Write Access read/write LV Status available # open 1 LV Size 240.00 GB Current LE 61440 Segments 1 Allocation normal Read ahead sectors 10000 Block device 253:2
Thus new size as it should be.
Also, the difference between the current and old VG is:
# diff /etc/lvm/backup/Volume00 /etc/lvm/archive/Volume00_00004.vg 1c1 < # Generated by LVM2: Tue May 16 12:27:42 2006 ---
Quoted 1 line
# Generated by LVM2: Tue May 16 12:24:15 2006
6c6
< description = "Created *after* executing 'vgdisplay'"
---
Quoted 1 line
description = "Created *before* executing 'lvextend -L 240G -
v /dev/Volume00/LogVol01'"
9c9
< creation_time = 1147778862 # Tue May 16 12:27:42 2006
---
Quoted 1 line
creation_time= 1147778655 # Tue May 16 12:24:15 2006
83c83
< extent_count = 61440 # 240 Gigabytes
---
Quoted 1 line
extent_count = 25000 # 97.6562
Gigabytes
The whole new /etc/lvm/backup/Volume00 is
# cat /etc/lvm/backup/Volume00 # Generated by LVM2: Tue May 16 12:27:42 2006
contents = "Text Format Volume Group"
version = 1
description = "Created *after* executing 'vgdisplay'"
creation_host = "neo.ucc.ie" # Linux neo.ucc.ie 2.6.9-34.ELsmp #1 SMP
Fri Feb 24 16:54:53 EST 2006 i686creation_time = 1147778862 # Tue May 16 12:27:42 2006
Volume00 {
id = "H0hRDH-Ud2L-fYSG-j1mE-3QfB-5xMo-3Sb6Mf"
seqno = 0
status = ["RESIZEABLE", "READ", "WRITE"]
system_id = "localhost.localdomain1077884666"
extent_size = 8192 # 4 Megabytes
max_lv = 256
max_pv = 256
physical_volumes {
pv0 {
id = "xXbxiu-uog2-xSRe-dI2z-y2ZQ-9weE-ftY6YL"
device = "/dev/cciss/c0d0p5" # Hint only
status = ["ALLOCATABLE"]
pe_start = 9472
pe_count = 126981 # 496.02 Gigabytes
}
}
logical_volumes {
LogVol00 {
id = "000000-0000-0000-0000-0000-0000-000000"
status = ["READ", "WRITE", "VISIBLE"]
allocation_policy = "normal"
read_ahead = 10000
segment_count = 1
segment1 {
start_extent = 0
extent_count = 25000 # 97.6562Gigabytes
type = "striped"
stripe_count = 1 # linear
stripes = [
"pv0", 0
]
}
}
LogVol02 {
id = "000000-0000-0000-0000-0000-0000-000001"
status = ["READ", "WRITE", "VISIBLE"]
allocation_policy = "normal"
read_ahead = 10000
segment_count = 1
segment1 {
start_extent = 0
extent_count = 5120 # 20 Gigabytes
type = "striped"
stripe_count = 1 # linear
stripes = [
"pv0", 25000
]
}
}
LogVol01 {
id = "000000-0000-0000-0000-0000-0000-000002"
status = ["READ", "WRITE", "VISIBLE"]
allocation_policy = "normal"
read_ahead = 10000
segment_count = 1
segment1 {
start_extent = 0
extent_count = 61440 # 240 Gigabytes
type = "striped"
stripe_count = 1 # linear
stripes = [
"pv0", 50000
]
}
}
}
}How come the size extension didn't go through?
Any hints are much appreciated!
Regards,
Marcus
Quoted 197 lines · Marcus Claesson
Hi all,
I want to allocate 140G of the free space in my VG and use it to extend /var (
/dev/Volume00/LogVol01) from 97G to 240G. After I unmounted /var (which was impossible until I used a lazy 'umount - l /var'), I ran# lvextend -L 240G /dev/Volume00/LogVol01 (unfortunately I was in single-user mode and wasn't able to save the output, but it basically said 'extension successful). I then re- mounted /var:# mount /dev/mapper/Volume00-LogVol01 /var/ kjournald starting. Commit interval 5 seconds EXT3 FS on dm-2, internal journal EXT3-fs: mounted filesystem with ordered data mode.and ran a df to check:
# df -h Filesystem Size Used Avail Use% Mounted on /dev/cciss/c0d0p2 49G 19G 27G 42% / /dev/cciss/c0d0p1 99M 9.8M 84M 11% /boot /dev/mapper/Volume00-LogVol00 97G 84G 8.1G 92% /home none 2.9G 0 2.9G 0% /dev/shm /dev/mapper/Volume00-LogVol02 20G 11G 8.4G 56% /usr/local sunrpc 97G 88G 3.6G 97% /var/lib/nfs/rpc_pipefs /dev/mapper/Volume00-LogVol01 97G 88G 3.6G 97% /varTo my surprise /var hadn't been extended at all and a new sunrpc device had also been mounted! The lvm info is now:
# vgdisplay --- Volume group --- VG Name Volume00 System ID localhost.localdomain1077884666 Format lvm1 VG Access read/write VG Status resizable MAX LV 256 Cur LV 3 Open LV 3 Max PV 256 Cur PV 1 Act PV 1 VG Size 496.02 GB PE Size 4.00 MB Total PE 126981 Alloc PE / Size 91560 / 357.66 GB Free PE / Size 35421 / 138.36 GB VG UUID H0hRDH-Ud2L-fYSG-j1mE-3QfB-5xMo-3Sb6MfThus 240G has been used up.
# lvdisplay --- Logical volume --- LV Name /dev/Volume00/LogVol01 VG Name Volume00 LV UUID 000000-0000-0000-0000-0000-0000-000002 LV Write Access read/write LV Status available # open 1 LV Size 240.00 GB Current LE 61440 Segments 1 Allocation normal Read ahead sectors 10000 Block device 253:2Thus new size as it should be.
Also, the difference between the current and old VG is:
# diff /etc/lvm/backup/Volume00 /etc/lvm/archive/Volume00_00004.vg 1c1 < # Generated by LVM2: Tue May 16 12:27:42 2006 ---Quoted 1 line
# Generated by LVM2: Tue May 16 12:24:15 2006
6c6
< description = "Created *after* executing 'vgdisplay'"
---Quoted 1 line
description = "Created *before* executing 'lvextend -L 240G -
v
/dev/Volume00/LogVol01'"
9c9
<creation_time= 1147778862 # Tue May 16 12:27:42 2006
---Quoted 1 line
creation_time= 1147778655 # Tue May 16 12:24:15 200683c83
<extent_count= 61440 # 240 Gigabytes
---Quoted 1 line
extent_count = 25000 # 97.6562Gigabytes
The whole new
/etc/lvm/backup/Volume00is# cat /etc/lvm/backup/Volume00 # Generated by LVM2: Tue May 16 12:27:42 2006contents = "Text Format Volume Group"
version = 1description = "Created *after* executing 'vgdisplay'"
creation_host= "neo.ucc.ie" # Linux neo.ucc.ie 2.6.9-34.ELsmp #1 SMP
Fri Feb 24 16:54:53 EST 2006 i686creation_time= 1147778862 # Tue May 16 12:27:42 2006Volume00 { id = "H0hRDH-Ud2L-fYSG-j1mE-3QfB-5xMo-3Sb6Mf" seqno = 0 status = ["RESIZEABLE", "READ", "WRITE"] system_id = "localhost.localdomain1077884666" extent_size = 8192 # 4 Megabytes max_lv = 256 max_pv = 256 physical_volumes { pv0 { id = "xXbxiu-uog2-xSRe-dI2z-y2ZQ-9weE-ftY6YL" device = "/dev/cciss/c0d0p5" # Hint only status = ["ALLOCATABLE"] pe_start = 9472 pe_count = 126981 # 496.02 Gigabytes } } logical_volumes { LogVol00 { id = "000000-0000-0000-0000-0000-0000-000000" status = ["READ", "WRITE", "VISIBLE"] allocation_policy = "normal" read_ahead = 10000 segment_count = 1 segment1 { start_extent = 0 extent_count = 25000 # 97.6562Gigabytes
type = "striped" stripe_count = 1 # linear stripes = [ "pv0", 0 ] } } LogVol02 { id = "000000-0000-0000-0000-0000-0000-000001" status = ["READ", "WRITE", "VISIBLE"] allocation_policy = "normal" read_ahead = 10000 segment_count = 1 segment1 { start_extent = 0 extent_count = 5120 # 20 Gigabytes type = "striped" stripe_count = 1 # linear stripes = [ "pv0", 25000 ] } } LogVol01 { id = "000000-0000-0000-0000-0000-0000-000002" status = ["READ", "WRITE", "VISIBLE"] allocation_policy = "normal" read_ahead = 10000 segment_count = 1 segment1 { start_extent = 0 extent_count = 61440 # 240 Gigabytes type = "striped" stripe_count = 1 # linear stripes = [ "pv0", 50000 ] } } } }
Quoted 3 lines
How come the size extension didn't go through?
Any hints are much appreciated!
It has been extended, you need to extend the filesystem too:
See the LVM HOWTO at
http://www.tldp.org/HOWTO/LVM-HOWTO/extendlv.html
Signature · 1 line
patrick