Fix a NO_IDLE_HZ timer bug
PATCH 1/1 Fix a NO_IDLE_HZ timer bug
This bug affects at least s390, Xen, and occurred during testing of NO_IDLE_HZ with our VMI patches. The bug is rather subtle and rare. Jiffies can be advanced by other CPUs, but if the current CPU has not processed timer softirqs in a while, the timer wheel can be behind jiffies, causing an overflow when comparing the next timer wheel expiration with the default high resolution timeout (no timeout), which is relative to jiffies.
It also looks like s390 has another bug. When compiling the 32-bit kernel, doesn't this computation overflow:
arch/s390/kernel/time.c, stop_hz_timer:274
/*
* This cpu is going really idle. Set up the clock comparator
* for the next event.
*/
next = next_timer_interrupt();
do {
seq = read_seqbegin_irqsave(&xtime_lock, flags);
timer = (__u64)(next - jiffies) + jiffies_64;
} while (read_seqretry_irqrestore(&xtime_lock, seq, flags));Since jiffies can advance between next_timer_interrupt and the read under xtime lock, next-jiffies could be negative. I would think you want to cast that to signed long instead of __u64, but I'm not totally qualified to talk about s390.
Zach
Under certain timing conditions, a race during boot occurs where timer ticks are being processed on remote CPUs. The remote timer ticks can increment jiffies, and if this happens during a window when a timeout is very close to expiring but a local tick has not yet been delivered, you can end up with
1) No softirq pending
2) A local timer wheel which is not synced to jiffies
3) No high resolution timer active
4) A local timer which is supposed to fire before the current jiffies value.
In this circumstance, the comparison in next_timer_interrupt overflows, because the base of the comparison for high resolution timers is jiffies, but for the softirq timer wheel, it is relative the the current base of the wheel (jiffies_base).
kernel/timer.c +16 -0
@@ -541,6 +541,22 @@ found: }spin_unlock (&base->lock); +/* +* It can happen that other CPUs service timer IRQs and increment +* jiffies, but we have not yet got a local timer tick to process +* the timer wheels. In that case, the expiry time can be before +* jiffies, but since the high-resolution timer here is relative to +* jiffies, the default expression when high-resolution timers are +* not active, +* +* time_before(MAX_JIFFY_OFFSET + jiffies, expires) +* +* would falsely evaluate to true. If that is the case, just +* return jiffies so that we can immediately fire the local timer +*/ +if (time_before (expires, jiffies)) +return jiffies; +if (time_before (hr_expires, expires))return hr_expires;
_______________________________________________
Xen-devel mailing list
[email protected]
http://lists.xensource.com/xen-devel
Quoted 16 lines · Zachary Amsden
It also looks like s390 has another bug. When compiling the 32-bit kernel, doesn't this computation overflow:
arch/s390/kernel/time.c, stop_hz_timer:274/* * This cpu is going really idle. Set up the clock comparator * for the next event. */ next = next_timer_interrupt(); do { seq = read_seqbegin_irqsave(&xtime_lock, flags); timer = (__u64)(next - jiffies) + jiffies_64; } while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
Quoted 4 lines
Since jiffies can advance between
next_timer_interruptand the read under xtime lock, next-jiffies could be negative. I would think you want to cast that to signed long instead of__u64, but I'm not totally qualified to talk about s390.
Seems like you are qualified to talk about s390 in this case. The extension of (next - jiffies) to a 64 bit value needs to be done as a signed extension, follow by a cast to u64. Blech. I think to cast next and jiffies to u64 before subtracting them is cleaner. It takes a few more cycles because we now do two 64 bit adds/subtracts but the code is used for going idle so it doesn't matter. Patch attached, thanks Zach.
Signature · 40 lines
blue skies, Martin. Martin Schwidefsky Linux for zSeries Development & Services IBM Deutschland Entwicklung GmbH "Reality continues to ruin my life." - Calvin. -- From: Martin Schwidefsky <[email protected]> [patch] s390: next_timer_interrupt overflow in stop_hz_timer. The 32 bit unsigned substraction (next - jiffies) in stop_hz_timer can overflow if jiffies gets advanced between next_timer_interrupt and the read under the xtime lock. The cast to a u64 then results in a large value which causes the cpu to wait too long. Fix this by casting next and jiffies independently to u64 before subtracting them. Signed-off-by: Martin Schwidefsky <[email protected]> --- arch/s390/kernel/time.c | 2 +- 1 files changed, 1 insertion(+), 1 deletion(-) diff -urpN linux-2.6/arch/s390/kernel/time.c linux-2.6-patched/arch/s390/kernel/time.c --- linux-2.6/arch/s390/kernel/time.c 2006-05-16 09:44:29.000000000 +0200 +++ linux-2.6-patched/arch/s390/kernel/time.c 2006-05-19 11:04:04.000000000 +0200 @@ -272,7 +272,7 @@ static inline void stop_hz_timer(void) next = next_timer_interrupt(); do { seq = read_seqbegin_irqsave(&xtime_lock, flags); - timer = (__u64)(next - jiffies) + jiffies_64; + timer = (__u64 next) - (__u64 jiffies) + jiffies_64; } while (read_seqretry_irqrestore(&xtime_lock, seq, flags)); todval = -1ULL; /* Be careful about overflows. */