Skip to contentSkip to conversation

RaLink rt2500 wireless local area network

DISCUSSION Tommi Tapani Piirainen 2 participants 3 messages May 29, 2006 – Jun 5, 2006

lore
Share & tools
lore
#0 lore raw

Hello,

I have tried to install modules for rt2500 some time now with rt2500 or rt2x00 module. I have managed to compile the module and install it, but after loading the module with insmod error occure "-1, File don't exist" some thing like that. Modprobe though don't give error and I can see module loaded with lsmod, but iwconfig don't show any wireless devices:(

Error loading the module can be generic, because I can't load other modules I compile eather. So if some one can help me with procedure neccessary to install modules?

Now I have tried to compile the module and then install it and load it with modprobe or insmod.

#make
#make install
#insmod $module

Where the $module is a name for the module installed.

give error "-1, File don't exist"

#emerge net-wireless/rt2500
#insmod $module

don't work, same error "-1, File don't exist"

Some times compiling give me errors other times not, I am confused. Error is usually "RT2500_DBG not set" if I can remember right. Any suggestions?

I am tried to install the module too long so I will try use windows drivers if I don't manage to use rt2x00. Is this right way to go?

I currently change my operating system to Gentoo and I'm not really familiar with it:( My recent compiled kernel is (gentoo-sources) 2.6.16-r7.

I have pcmcia and amateur radio compiled in the kernel.

Signature · 8 lines
*********************
[email protected]
**********************
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
#1 lore raw
Quoted 20 lines · Tommi Tapani Piirainen

Hello,

I have tried to install modules for rt2500 some time now with rt2500 or rt2x00 module. I have managed to compile the module and install it, but after loading the module with insmod error occure "-1, File don't exist" some thing like that. Modprobe though don't give error and I can see module loaded with lsmod, but iwconfig don't show any wireless devices:(

Error loading the module can be generic, because I can't load other modules I compile eather. So if some one can help me with procedure neccessary to install modules?

Now I have tried to compile the module and then install it and load it with modprobe or insmod.

#make #make install
#insmod $module

Where the $module is a name for the module installed.

give error "-1, File don't exist"

#emerge net-wireless/rt2500
#insmod $module

don't work, same error "-1, File don't exist"

Quoted 10 lines

Some times compiling give me errors other times not, I am confused. Error is usually "RT2500_DBG not set" if I can remember right. Any suggestions?

I am tried to install the module too long so I will try use windows drivers if I don't manage to use rt2x00. Is this right way to go?

I currently change my operating system to Gentoo and I'm not really familiar with it:( My recent compiled kernel is (gentoo-sources) 2.6.16-r7.

I have pcmcia and amateur radio compiled in the kernel.

Hi, Tommi:

Please always give the exact command and the exact error message.
I 'googled' and found some comments about problems with using rt2500 module(s). Probably, you should mention your linux distribution (with version) and kernel (2.?.?). I see where someone was having a problem with ndiswrapper and a rt2500 device notbeing able to specify 'b/g' [802.11b/802.11g].

The wireless device in my laptop is a Broadcom 94306 and I got it to work by using ndiswrapper. If you try ndiswrapper, perhaps my setup will be similar to yours:
http://gelm.net/2005/zv5410us/wireless.html

"-1, File don't exist"

Did you run 'depmod -a' after installing the module? Is the module where your kernel expects to find it? (where the other modules are)
My system runs 'depmod -a' with every boot.

I am not familiar with the command 'emerge'. :-|

In your example "#insmod $module", we do not know, for sure, what '$module' is equal to. !?! Please specify module name in command line.

'insmod' does not assume any parameters, perhaps you need some parameters or arguments in the 'insmod' command line.

'modprobe' will try to assume some parameters or arguments and if it assumes correctly all is well.

However, you mention:
"Error loading the module can be generic, because I can't load other modules I compile eather. So if some one can help me with procedure neccessary to install modules?"

Yes, Show us how, exactly, you are trying to load modules and the exact error messages.

Which distribution and kernel?
Which module version and source ? (http://download.blahblah.org/pub/rt2500-2.1.23.tar.gz)

Perhaps some messages are appearing in /var/log/messages. Watch tail -f /var/log/messages
while you insert the device.

HTH, Chuck

-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

#2 lore raw

Re: RaLink rt2500 wireless local area network SOLVED

Quoted 113 lines · On Mon, 29 May 2006 07:50:26 -0400 chuck gelm <[email protected]> wrote:
Quoted 3 lines · Tommi Tapani Piirainen

Hello,

I have tried to install modules for rt2500 some time now with rt2500

or rt2x00

Quoted 1 line

module. I have managed to compile the module and install it, but after

loading

Quoted 1 line

the module with insmod error occure "-1, File don't exist" some thing

like

Quoted 1 line

that. Modprobe though don't give error and I can see module loaded

with lsmod,

Quoted 3 lines

but iwconfig don't show any wireless devices:(

Error loading the module can be generic, because I can't load other

modules I

Quoted 1 line

compile eather. So if some one can help me with procedure neccessary

to install

Quoted 3 lines

modules?

Now I have tried to compile the module and then install it and load it

with

Quoted 8 lines

modprobe or insmod.

#make
#make install
#insmod $module

Where the $module is a name for the module installed.

Quoted 8 lines

give error "-1, File don't exist"

#emerge net-wireless/rt2500
#insmod $module

don't work, same error "-1, File don't exist"

Some times compiling give me errors other times not, I am confused.

Error is

Quoted 3 lines

usually "RT2500_DBG not set" if I can remember right. Any suggestions?

I am tried to install the module too long so I will try use windows

drivers if

Quoted 3 lines

I don't manage to use rt2x00. Is this right way to go?

I currently change my operating system to Gentoo and I'm not really

familiar

Quoted 6 lines

with it:( My recent compiled kernel is (gentoo-sources) 2.6.16-r7.

I have pcmcia and amateur radio compiled in the kernel.

Hi, Tommi:

Please always give the exact command and the exact error message.
I 'googled' and found some comments about problems with using rt2500 module(s).
Probably, you should mention your linux distribution (with version) and

kernel (2.?.?).
I see where someone was having a problem with ndiswrapper and a rt2500 device
notbeing able to specify 'b/g' [802.11b/802.11g].

The wireless device in my laptop is a Broadcom 94306 and I got it to
work by using
ndiswrapper. If you try ndiswrapper, perhaps my setup will be similar to yours:
http://gelm.net/2005/zv5410us/wireless.html

"-1, File don't exist"

Did you run 'depmod -a' after installing the module?
Is the module where your kernel expects to find it?
(where the other modules are)
My system runs 'depmod -a' with every boot.

I am not familiar with the command 'emerge'. :-|

In your example "#insmod $module", we do not know, for sure, what
'$module' is equal to. !?!
Please specify module name in command line.

'insmod' does not assume any parameters, perhaps you need some
parameters or arguments
in the 'insmod' command line.

'modprobe' will try to assume some parameters or arguments and if it
assumes correctly
all is well.

However, you mention:
"Error loading the module can be generic, because I can't load other modules I
compile eather. So if some one can help me with procedure neccessary to install
modules?"

Yes, Show us how, exactly, you are trying to load modules and
the exact error messages.

Which distribution and kernel?
Which module version and source ?
(http://download.blahblah.org/pub/rt2500-2.1.23.tar.gz)

Perhaps some messages are appearing in /var/log/messages. Watch
tail -f /var/log/messages
while you insert the device.

HTH, Chuck

Quoted 7 lines

-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

Hi,

I just wanted to reply that I solved the problem. Actually my chip was rt61. So I downloaded drivers from the ralink site "http://www.ralinktech.com/supp- 1.htm" and compiled it. I got few warnings during compilation and I get warning when I load the module, but it seems to work:)

Signature · 7 lines
******
Tommi 
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs