Skip to contentSkip to conversation

powerpc: Add of_parse_dma_window()

PATCH In review Jeremy Kerr 5 participants 9 messages May 18, 2006 – May 31, 2006 PowerPC

lore
Share & tools
lore
#0 lore raw

PATCH 1/2 powerpc: Add of_parse_dma_window()

Add a function for generic parsing of dma-window properties (ie, ibm,dma-window and ibm,my-dma-window) of pci and virtual device nodes.

This function will also be used by cell.

 arch/powerpc/kernel/prom_parse.c |   23 +++++++++++++++++++++++
 include/asm-powerpc/prom.h       |    6 ++++++
 2 files changed, 29 insertions(+)
arch/powerpc/kernel/prom_parse.c +23 -0
Index: linux-2.6/arch/powerpc/kernel/prom_parse.c
===================================================================
@@ -548,3 +548,26 @@ int of_pci_address_to_resource(struct de
 	return __of_address_to_resource(dev, addrp, size, flags, r);
 }
 EXPORT_SYMBOL_GPL(of_pci_address_to_resource);
+
+void of_parse_dma_window(struct device_node *dn, unsigned char *dma_window_prop,
+		unsigned long *busno, unsigned long *phys, unsigned long *size)
+{
+	u32 *dma_window, cells;
+	unsigned char *prop;
+
+	dma_window = (u32 *)dma_window_prop;
+
+	/* busno is always one cell */
+	*busno = *(dma_window++);
+
+	prop = get_property(dn, "ibm,#dma-address-cells", NULL);
+	cells = prop ? *(u32 *)prop : prom_n_addr_cells(dn);
+	*phys = of_read_addr(dma_window, cells);
+
+	dma_window += cells;
+
+	prop = get_property(dn, "ibm,#dma-size-cells", NULL);
+	cells = prop ? *(u32 *)prop : prom_n_size_cells(dn);
+	*size = of_read_addr(dma_window, cells);
+}
+EXPORT_SYMBOL_GPL(of_parse_dma_window);
include/asm-powerpc/prom.h +6 -0
Index: linux-2.6/include/asm-powerpc/prom.h
===================================================================
@@ -230,6 +230,12 @@ extern int of_address_to_resource(struct
 extern int of_pci_address_to_resource(struct device_node *dev, int bar,
 				      struct resource *r);
 
+/* Parse the ibm,dma-window property of an OF node into the busno, phys and
+ * size parameters.
+ */
+void of_parse_dma_window(struct device_node *dn, unsigned char *dma_window_prop,
+		unsigned long *busno, unsigned long *phys, unsigned long *size);
+
 extern void kdump_move_device_tree(void);
 
 #endif /* __KERNEL__ */

To: [email protected]
From: Jeremy Kerr <[email protected]>
Date: Thu, 18 May 2006 16:20:51 +1000
Subject: [PATCH 2/2] powerpc: pseries: Use generic dma-window parsing function
Message-Id: <1147933251.472945.297063284077.qpush@pokey>

Change the pseries iommu init code to use the new of_parse_dma_window() to parse the ibm,dma-window and ibm,my-dma-window properties of pci and virtual device nodes.

Also, clean up vio_build_iommu_table() a little.

Tested on pseries, with both vio and pci devices.

 arch/powerpc/platforms/pseries/iommu.c |   29 ++++++++++-------------------
 arch/powerpc/platforms/pseries/vio.c   |   32 ++++++++++++++------------------
 2 files changed, 24 insertions(+), 37 deletions(-)
arch/powerpc/platforms/pseries/iommu.c +10 -19
Index: linux-2.6/arch/powerpc/platforms/pseries/iommu.c
===================================================================
@@ -299,30 +299,22 @@ static void iommu_table_setparms(struct 
  * iommu_table_setparms_lpar
  *
  * Function: On pSeries LPAR systems, return TCE table info, given a pci bus.
- *
- * ToDo: properly interpret the ibm,dma-window property.  The definition is:
- *	logical-bus-number	(1 word)
- *	phys-address		(#address-cells words)
- *	size			(#cell-size words)
- *
- * Currently we hard code these sizes (more or less).
  */
 static void iommu_table_setparms_lpar(struct pci_controller *phb,
 				      struct device_node *dn,
 				      struct iommu_table *tbl,
-				      unsigned int *dma_window)
+				      unsigned char *dma_window)
 {
+	unsigned long offset, size;
+
 	tbl->it_busno  = PCI_DN(dn)->bussubno;
+	of_parse_dma_window(dn, dma_window, &tbl->it_index, &offset, &size);
 
-	/* TODO: Parse field size properties properly. */
-	tbl->it_size   = (((unsigned long)dma_window[4] << 32) |
-			   (unsigned long)dma_window[5]) >> PAGE_SHIFT;
-	tbl->it_offset = (((unsigned long)dma_window[2] << 32) |
-			   (unsigned long)dma_window[3]) >> PAGE_SHIFT;
 	tbl->it_base   = 0;
-	tbl->it_index  = dma_window[0];
 	tbl->it_blocksize  = 16;
 	tbl->it_type = TCE_PCI;
+	tbl->it_offset = offset >> PAGE_SHIFT;
+	tbl->it_size = size >> PAGE_SHIFT;
 }
 
 static void iommu_bus_setup_pSeries(struct pci_bus *bus)
@@ -414,7 +406,7 @@ static void iommu_bus_setup_pSeriesLP(st
 	struct iommu_table *tbl;
 	struct device_node *dn, *pdn;
 	struct pci_dn *ppci;
-	unsigned int *dma_window = NULL;
+	unsigned char *dma_window = NULL;
 
 	DBG("iommu_bus_setup_pSeriesLP, bus %p, bus->self %p\n", bus, bus->self);
 
@@ -422,7 +414,7 @@ static void iommu_bus_setup_pSeriesLP(st
 
 	/* Find nearest ibm,dma-window, walking up the device tree */
 	for (pdn = dn; pdn != NULL; pdn = pdn->parent) {
-		dma_window = (unsigned int *)get_property(pdn, "ibm,dma-window", NULL);
+		dma_window = get_property(pdn, "ibm,dma-window", NULL);
 		if (dma_window != NULL)
 			break;
 	}
@@ -516,7 +508,7 @@ static void iommu_dev_setup_pSeriesLP(st
 {
 	struct device_node *pdn, *dn;
 	struct iommu_table *tbl;
-	int *dma_window = NULL;
+	unsigned char *dma_window = NULL;
 	struct pci_dn *pci;
 
 	DBG("iommu_dev_setup_pSeriesLP, dev %p (%s)\n", dev, pci_name(dev));
@@ -531,8 +523,7 @@ static void iommu_dev_setup_pSeriesLP(st
 
 	for (pdn = dn; pdn && PCI_DN(pdn) && !PCI_DN(pdn)->iommu_table;
 	     pdn = pdn->parent) {
-		dma_window = (unsigned int *)
-			get_property(pdn, "ibm,dma-window", NULL);
+		dma_window = get_property(pdn, "ibm,dma-window", NULL);
 		if (dma_window)
 			break;
 	}
arch/powerpc/platforms/pseries/vio.c +14 -18
Index: linux-2.6/arch/powerpc/platforms/pseries/vio.c
===================================================================
@@ -108,32 +108,28 @@ __initcall(vio_bus_init_pseries);
 */
 static struct iommu_table *vio_build_iommu_table(struct vio_dev *dev)
 {
-	unsigned int *dma_window;
-	struct iommu_table *newTceTable;
-	unsigned long offset;
-	int dma_window_property_size;
+	unsigned char *dma_window;
+	struct iommu_table *tbl;
+	unsigned long offset, size;
 
-	dma_window = (unsigned int *) get_property(dev->dev.platform_data, "ibm,my-dma-window", &dma_window_property_size);
-	if(!dma_window) {
+	dma_window = get_property(dev->dev.platform_data,
+			"ibm,my-dma-window", NULL);
+	if (!dma_window)
 		return NULL;
-	}
 
-	newTceTable = (struct iommu_table *) kmalloc(sizeof(struct iommu_table), GFP_KERNEL);
+	tbl = (struct iommu_table *)kmalloc(sizeof(*tbl), GFP_KERNEL);
 
-	/*  There should be some code to extract the phys-encoded offset
-		using prom_n_addr_cells(). However, according to a comment
-		on earlier versions, it's always zero, so we don't bother */
-	offset = dma_window[1] >>  PAGE_SHIFT;
+	of_parse_dma_window(dev->dev.platform_data, dma_window,
+			&tbl->it_index, &offset, &size);
 
 	/* TCE table size - measured in tce entries */
-	newTceTable->it_size		= dma_window[4] >> PAGE_SHIFT;
+	tbl->it_size	= size >> PAGE_SHIFT;
 	/* offset for VIO should always be 0 */
-	newTceTable->it_offset		= offset;
-	newTceTable->it_busno		= 0;
-	newTceTable->it_index		= (unsigned long)dma_window[0];
-	newTceTable->it_type		= TCE_VB;
+	tbl->it_offset	= offset >> PAGE_SHIFT;
+	tbl->it_busno	= 0;
+	tbl->it_type	= TCE_VB;
 
-	return iommu_init_table(newTceTable);
+	return iommu_init_table(tbl);
 }
 
 /**
#1 lore raw

Whoa, looks like two mails got merged into one. A re-send is coming..

Jeremy

Acked-by on v1 1/2
#2 lore raw
In reply to Jeremy Kerr
Quoted 6 lines · Jeremy Kerr

Add a function for generic parsing of dma-window properties (ie, ibm,dma-window and ibm,my-dma-window) of pci and virtual device nodes.

This function will also be used by cell.

(I'm assuming you've booted it on POWER4 LPAR and JS20, I don't have access to either to make sure it doesn't break there. Main worry would be if it lacked ibm,#dma*-properties for some reason.)

Quoted 208 lines
 arch/powerpc/kernel/prom_parse.c |   23 +++++++++++++++++++++++
 include/asm-powerpc/prom.h       |    6 ++++++
 2 files changed, 29 insertions(+)

Index: linux-2.6/arch/powerpc/kernel/prom_parse.c
===================================================================

arch/powerpc/kernel/prom_parse.c +23 -0
@@ -548,3 +548,26 @@ int of_pci_address_to_resource(struct de
 	return __of_address_to_resource(dev, addrp, size, flags, r);
 }
 EXPORT_SYMBOL_GPL(of_pci_address_to_resource);
+
+void of_parse_dma_window(struct device_node *dn, unsigned char *dma_window_prop,
+		unsigned long *busno, unsigned long *phys, unsigned long *size)
+{
+	u32 *dma_window, cells;
+	unsigned char *prop;
+
+	dma_window = (u32 *)dma_window_prop;
+
+	/* busno is always one cell */
+	*busno = *(dma_window++);
+
+	prop = get_property(dn, "ibm,#dma-address-cells", NULL);
+	cells = prop ? *(u32 *)prop : prom_n_addr_cells(dn);
+	*phys = of_read_addr(dma_window, cells);
+
+	dma_window += cells;
+
+	prop = get_property(dn, "ibm,#dma-size-cells", NULL);
+	cells = prop ? *(u32 *)prop : prom_n_size_cells(dn);
+	*size = of_read_addr(dma_window, cells);
+}
+EXPORT_SYMBOL_GPL(of_parse_dma_window);

Index: linux-2.6/include/asm-powerpc/prom.h
===================================================================

include/asm-powerpc/prom.h +6 -0
@@ -230,6 +230,12 @@ extern int of_address_to_resource(struct
 extern int of_pci_address_to_resource(struct device_node *dev, int bar,
 				      struct resource *r);
 
+/* Parse the ibm,dma-window property of an OF node into the busno, phys and
+ * size parameters.
+ */
+void of_parse_dma_window(struct device_node *dn, unsigned char *dma_window_prop,
+		unsigned long *busno, unsigned long *phys, unsigned long *size);
+
 extern void kdump_move_device_tree(void);
 
 #endif /* __KERNEL__ */

To: [email protected]
From: Jeremy Kerr <[email protected]>
Date: Thu, 18 May 2006 16:20:51 +1000
Subject: [PATCH 2/2] powerpc: pseries: Use generic dma-window parsing function
Message-Id: <1147933251.472945.297063284077.qpush@pokey>

Change the pseries iommu init code to use the new of_parse_dma_window() to parse the ibm,dma-window and ibm,my-dma-window properties of pci and virtual device nodes.

Also, clean up vio_build_iommu_table() a little.

Tested on pseries, with both vio and pci devices.

 arch/powerpc/platforms/pseries/iommu.c |   29 ++++++++++-------------------
 arch/powerpc/platforms/pseries/vio.c   |   32 ++++++++++++++------------------
 2 files changed, 24 insertions(+), 37 deletions(-)

Index: linux-2.6/arch/powerpc/platforms/pseries/iommu.c
===================================================================

arch/powerpc/platforms/pseries/iommu.c +10 -19
@@ -299,30 +299,22 @@ static void iommu_table_setparms(struct 
  * iommu_table_setparms_lpar
  *
  * Function: On pSeries LPAR systems, return TCE table info, given a pci bus.
- *
- * ToDo: properly interpret the ibm,dma-window property.  The definition is:
- *	logical-bus-number	(1 word)
- *	phys-address		(#address-cells words)
- *	size			(#cell-size words)
- *
- * Currently we hard code these sizes (more or less).
  */
 static void iommu_table_setparms_lpar(struct pci_controller *phb,
 				      struct device_node *dn,
 				      struct iommu_table *tbl,
-				      unsigned int *dma_window)
+				      unsigned char *dma_window)
 {
+	unsigned long offset, size;
+
 	tbl->it_busno  = PCI_DN(dn)->bussubno;
+	of_parse_dma_window(dn, dma_window, &tbl->it_index, &offset, &size);
 
-	/* TODO: Parse field size properties properly. */
-	tbl->it_size   = (((unsigned long)dma_window[4] << 32) |
-			   (unsigned long)dma_window[5]) >> PAGE_SHIFT;
-	tbl->it_offset = (((unsigned long)dma_window[2] << 32) |
-			   (unsigned long)dma_window[3]) >> PAGE_SHIFT;
 	tbl->it_base   = 0;
-	tbl->it_index  = dma_window[0];
 	tbl->it_blocksize  = 16;
 	tbl->it_type = TCE_PCI;
+	tbl->it_offset = offset >> PAGE_SHIFT;
+	tbl->it_size = size >> PAGE_SHIFT;
 }
 
 static void iommu_bus_setup_pSeries(struct pci_bus *bus)
@@ -414,7 +406,7 @@ static void iommu_bus_setup_pSeriesLP(st
 	struct iommu_table *tbl;
 	struct device_node *dn, *pdn;
 	struct pci_dn *ppci;
-	unsigned int *dma_window = NULL;
+	unsigned char *dma_window = NULL;
 
 	DBG("iommu_bus_setup_pSeriesLP, bus %p, bus->self %p\n", bus, bus->self);
 
@@ -422,7 +414,7 @@ static void iommu_bus_setup_pSeriesLP(st
 
 	/* Find nearest ibm,dma-window, walking up the device tree */
 	for (pdn = dn; pdn != NULL; pdn = pdn->parent) {
-		dma_window = (unsigned int *)get_property(pdn, "ibm,dma-window", NULL);
+		dma_window = get_property(pdn, "ibm,dma-window", NULL);
 		if (dma_window != NULL)
 			break;
 	}
@@ -516,7 +508,7 @@ static void iommu_dev_setup_pSeriesLP(st
 {
 	struct device_node *pdn, *dn;
 	struct iommu_table *tbl;
-	int *dma_window = NULL;
+	unsigned char *dma_window = NULL;
 	struct pci_dn *pci;
 
 	DBG("iommu_dev_setup_pSeriesLP, dev %p (%s)\n", dev, pci_name(dev));
@@ -531,8 +523,7 @@ static void iommu_dev_setup_pSeriesLP(st
 
 	for (pdn = dn; pdn && PCI_DN(pdn) && !PCI_DN(pdn)->iommu_table;
 	     pdn = pdn->parent) {
-		dma_window = (unsigned int *)
-			get_property(pdn, "ibm,dma-window", NULL);
+		dma_window = get_property(pdn, "ibm,dma-window", NULL);
 		if (dma_window)
 			break;
 	}

Index: linux-2.6/arch/powerpc/platforms/pseries/vio.c
===================================================================

arch/powerpc/platforms/pseries/vio.c +14 -18
@@ -108,32 +108,28 @@ __initcall(vio_bus_init_pseries);
 */
 static struct iommu_table *vio_build_iommu_table(struct vio_dev *dev)
 {
-	unsigned int *dma_window;
-	struct iommu_table *newTceTable;
-	unsigned long offset;
-	int dma_window_property_size;
+	unsigned char *dma_window;
+	struct iommu_table *tbl;
+	unsigned long offset, size;
 
-	dma_window = (unsigned int *) get_property(dev->dev.platform_data, "ibm,my-dma-window", &dma_window_property_size);
-	if(!dma_window) {
+	dma_window = get_property(dev->dev.platform_data,
+			"ibm,my-dma-window", NULL);
+	if (!dma_window)
 		return NULL;
-	}
 
-	newTceTable = (struct iommu_table *) kmalloc(sizeof(struct iommu_table), GFP_KERNEL);
+	tbl = (struct iommu_table *)kmalloc(sizeof(*tbl), GFP_KERNEL);
 
-	/*  There should be some code to extract the phys-encoded offset
-		using prom_n_addr_cells(). However, according to a comment
-		on earlier versions, it's always zero, so we don't bother */
-	offset = dma_window[1] >>  PAGE_SHIFT;
+	of_parse_dma_window(dev->dev.platform_data, dma_window,
+			&tbl->it_index, &offset, &size);
 
 	/* TCE table size - measured in tce entries */
-	newTceTable->it_size		= dma_window[4] >> PAGE_SHIFT;
+	tbl->it_size	= size >> PAGE_SHIFT;
 	/* offset for VIO should always be 0 */
-	newTceTable->it_offset		= offset;
-	newTceTable->it_busno		= 0;
-	newTceTable->it_index		= (unsigned long)dma_window[0];
-	newTceTable->it_type		= TCE_VB;
+	tbl->it_offset	= offset >> PAGE_SHIFT;
+	tbl->it_busno	= 0;
+	tbl->it_type	= TCE_VB;
 
-	return iommu_init_table(newTceTable);
+	return iommu_init_table(tbl);
 }
 
 /**

_______________________________________________
Linuxppc-dev mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-dev

#3 lore raw
Quoted 5 lines

(I'm assuming you've booted it on POWER4 LPAR and JS20, I don't have access to either to make sure it doesn't break there. Main worry would be if it lacked ibm,#dma*-properties for some reason.)

The code seems to be resilient against that. Haven't tested though.

Segher

#4 lore raw
Quoted 7 lines · Segher Boessenkool
Quoted 5 lines

(I'm assuming you've booted it on POWER4 LPAR and JS20, I don't have access to either to make sure it doesn't break there. Main worry would be if it lacked ibm,#dma*-properties for some reason.)

The code seems to be resilient against that. Haven't tested though.

Well, yes. I should have said: if it lacks the ibm,#dma- and the normal addr-cells properties aren't the same as we assumed before.

-Olof

#5 lore raw
Quoted 4 lines
Quoted 1 line

The code seems to be resilient against that. Haven't tested though.

Well, yes. I should have said: if it lacks the ibm,#dma- and the normal addr-cells properties aren't the same as we assumed before.

Missing #addr-cells means it's 2; does our code handle that correctly? Sorry, too tired to check it myself :-)

Segher

#6 lore raw

PATCH 1/1 fix of_parse_dma_window. was: Re: [PATCH 1/2] powerpc: Add of_parse_dma_window()

In reply to Olof Johansson
Quoted 11 lines · Olof Johansson
Quoted 7 lines · Segher Boessenkool
Quoted 5 lines

(I'm assuming you've booted it on POWER4 LPAR and JS20, I don't have access to either to make sure it doesn't break there. Main worry would be if it lacked ibm,#dma*-properties for some reason.)

The code seems to be resilient against that. Haven't tested though.

Well, yes. I should have said: if it lacks the ibm,#dma- and the normal addr-cells properties aren't the same as we assumed before.

My js20 appears to lack the ibm,#dma- properties, and boot fails with a "Kernel panic - not syncing: iommu_init_table: Can't allocate 0 bytes" message.

This adds a fallback to the "#address-cells" property in case the
"#ibm,dma-address-cells" property is missing. Tested on js20 and
power5 lpar.

Unless there is a more elegant solution... :-)

arch/powerpc/kernel/prom_parse.c +3 -0
index 23bb060..45df420 100644
@@ -561,6 +561,9 @@ void of_parse_dma_window(struct device_n
 	*busno = *(dma_window++);
 
 	prop = get_property(dn, "ibm,#dma-address-cells", NULL);
+	if (!prop)
+		prop = get_property(dn, "#address-cells", NULL);
+
 	cells = prop ? *(u32 *)prop : prom_n_addr_cells(dn);
 	*phys = of_read_addr(dma_window, cells);
 
#7 lore raw

Re: [PATCH] fix of_parse_dma_window. was: Re: [PATCH 1/2] powerpc: Add of_parse_dma_window()

Quoted 4 lines

Unless there is a more elegant solution... :-)

Ack, for a temporary fix. I'm working on a nicer solution at the moment.

Jeremy

#8 lore raw
In reply to Jeremy Kerr
Quoted 4 lines · Jeremy Kerr

Add a function for generic parsing of dma-window properties (ie, ibm,dma-window and ibm,my-dma-window) of pci and virtual device nodes.

This function will also be used by cell.

Any possibly of renaming this to of_parse_ibm_dma_window() since it handle an IBM specific attribute?

- kumar

Quoted 222 lines
 arch/powerpc/kernel/prom_parse.c |   23 +++++++++++++++++++++++
 include/asm-powerpc/prom.h       |    6 ++++++
 2 files changed, 29 insertions(+)

Index: linux-2.6/arch/powerpc/kernel/prom_parse.c
===================================================================

arch/powerpc/kernel/prom_parse.c +2 -0
@@ -548,3 +548,26 @@ int of_pci_address_to_resource(struct de
 	return __of_address_to_resource(dev, addrp, size, flags, r);
 }
 EXPORT_SYMBOL_GPL(of_pci_address_to_resource);
+
+void of_parse_dma_window(struct device_node *dn, unsigned char  

*dma_window_prop,

arch/powerpc/kernel/prom_parse.c +21 -0
+		unsigned long *busno, unsigned long *phys, unsigned long *size)
+{
+	u32 *dma_window, cells;
+	unsigned char *prop;
+
+	dma_window = (u32 *)dma_window_prop;
+
+	/* busno is always one cell */
+	*busno = *(dma_window++);
+
+	prop = get_property(dn, "ibm,#dma-address-cells", NULL);
+	cells = prop ? *(u32 *)prop : prom_n_addr_cells(dn);
+	*phys = of_read_addr(dma_window, cells);
+
+	dma_window += cells;
+
+	prop = get_property(dn, "ibm,#dma-size-cells", NULL);
+	cells = prop ? *(u32 *)prop : prom_n_size_cells(dn);
+	*size = of_read_addr(dma_window, cells);
+}
+EXPORT_SYMBOL_GPL(of_parse_dma_window);

Index: linux-2.6/include/asm-powerpc/prom.h
===================================================================

include/asm-powerpc/prom.h +1 -0
@@ -230,6 +230,12 @@ extern int of_address_to_resource(struct
 extern int of_pci_address_to_resource(struct device_node *dev, int  
 bar,
 				      struct resource *r);
 
+/* Parse the ibm,dma-window property of an OF node into the busno,  

phys and
+ * size parameters.
+ */
+void of_parse_dma_window(struct device_node *dn, unsigned char *dma_window_prop,

include/asm-powerpc/prom.h +2 -0
+		unsigned long *busno, unsigned long *phys, unsigned long *size);
+
 extern void kdump_move_device_tree(void);
 
 #endif /* __KERNEL__ */

To: [email protected]
From: Jeremy Kerr <[email protected]>
Date: Thu, 18 May 2006 16:20:51 +1000
Subject: [PATCH 2/2] powerpc: pseries: Use generic dma-window parsing function
Message-Id: <1147933251.472945.297063284077.qpush@pokey>

Change the pseries iommu init code to use the new of_parse_dma_window() to parse the ibm,dma-window and ibm,my-dma-window properties of pci and virtual device nodes.

Also, clean up vio_build_iommu_table() a little.

Tested on pseries, with both vio and pci devices.

 arch/powerpc/platforms/pseries/iommu.c |   29 +++++++++ 
+-------------------
 arch/powerpc/platforms/pseries/vio.c   |   32 +++++++++++++ 
+------------------
 2 files changed, 24 insertions(+), 37 deletions(-)

Index: linux-2.6/arch/powerpc/platforms/pseries/iommu.c
===================================================================

arch/powerpc/platforms/pseries/iommu.c +0 -0
@@ -299,30 +299,22 @@ static void iommu_table_setparms(struct
  * iommu_table_setparms_lpar
  *
  * Function: On pSeries LPAR systems, return TCE table info, given  

a pci bus.
- *
- * ToDo: properly interpret the ibm,dma-window property. The definition is:
- * logical-bus-number (1 word)
- * phys-address (#address-cells words)
- * size (#cell-size words)
- *
- * Currently we hard code these sizes (more or less). */
static void iommu_table_setparms_lpar(struct pci_controller *phb,

arch/powerpc/platforms/pseries/iommu.c +8 -9
 				      struct device_node *dn,
 				      struct iommu_table *tbl,
-				      unsigned int *dma_window)
+				      unsigned char *dma_window)
 {
+	unsigned long offset, size;
+
 	tbl->it_busno  = PCI_DN(dn)->bussubno;
+	of_parse_dma_window(dn, dma_window, &tbl->it_index, &offset, &size);
 
-	/* TODO: Parse field size properties properly. */
-	tbl->it_size   = (((unsigned long)dma_window[4] << 32) |
-			   (unsigned long)dma_window[5]) >> PAGE_SHIFT;
-	tbl->it_offset = (((unsigned long)dma_window[2] << 32) |
-			   (unsigned long)dma_window[3]) >> PAGE_SHIFT;
 	tbl->it_base   = 0;
-	tbl->it_index  = dma_window[0];
 	tbl->it_blocksize  = 16;
 	tbl->it_type = TCE_PCI;
+	tbl->it_offset = offset >> PAGE_SHIFT;
+	tbl->it_size = size >> PAGE_SHIFT;
 }
 
 static void iommu_bus_setup_pSeries(struct pci_bus *bus)
@@ -414,7 +406,7 @@ static void iommu_bus_setup_pSeriesLP(st
 	struct iommu_table *tbl;
 	struct device_node *dn, *pdn;
 	struct pci_dn *ppci;
-	unsigned int *dma_window = NULL;
+	unsigned char *dma_window = NULL;
 
 	DBG("iommu_bus_setup_pSeriesLP, bus %p, bus->self %p\n", bus, bus- 
 >self);
@@ -422,7 +414,7 @@ static void iommu_bus_setup_pSeriesLP(st
 
 	/* Find nearest ibm,dma-window, walking up the device tree */
 	for (pdn = dn; pdn != NULL; pdn = pdn->parent) {
-		dma_window = (unsigned int *)get_property(pdn, "ibm,dma-window",  
 NULL);
+		dma_window = get_property(pdn, "ibm,dma-window", NULL);
 		if (dma_window != NULL)
 			break;
arch/powerpc/platforms/pseries/iommu.c +2 -3
 	}
@@ -516,7 +508,7 @@ static void iommu_dev_setup_pSeriesLP(st
 {
 	struct device_node *pdn, *dn;
 	struct iommu_table *tbl;
-	int *dma_window = NULL;
+	unsigned char *dma_window = NULL;
 	struct pci_dn *pci;
 
 	DBG("iommu_dev_setup_pSeriesLP, dev %p (%s)\n", dev, pci_name(dev));
@@ -531,8 +523,7 @@ static void iommu_dev_setup_pSeriesLP(st
 
 	for (pdn = dn; pdn && PCI_DN(pdn) && !PCI_DN(pdn)->iommu_table;
 	     pdn = pdn->parent) {
-		dma_window = (unsigned int *)
-			get_property(pdn, "ibm,dma-window", NULL);
+		dma_window = get_property(pdn, "ibm,dma-window", NULL);
 		if (dma_window)
 			break;
 	}

Index: linux-2.6/arch/powerpc/platforms/pseries/vio.c
===================================================================

arch/powerpc/platforms/pseries/vio.c +14 -18
@@ -108,32 +108,28 @@ __initcall(vio_bus_init_pseries);
 */
 static struct iommu_table *vio_build_iommu_table(struct vio_dev *dev)
 {
-	unsigned int *dma_window;
-	struct iommu_table *newTceTable;
-	unsigned long offset;
-	int dma_window_property_size;
+	unsigned char *dma_window;
+	struct iommu_table *tbl;
+	unsigned long offset, size;
 
-	dma_window = (unsigned int *) get_property(dev- 
 >dev.platform_data, "ibm,my-dma-window", &dma_window_property_size);
-	if(!dma_window) {
+	dma_window = get_property(dev->dev.platform_data,
+			"ibm,my-dma-window", NULL);
+	if (!dma_window)
 		return NULL;
-	}
 
-	newTceTable = (struct iommu_table *) kmalloc(sizeof(struct  
 iommu_table), GFP_KERNEL);
+	tbl = (struct iommu_table *)kmalloc(sizeof(*tbl), GFP_KERNEL);
 
-	/*  There should be some code to extract the phys-encoded offset
-		using prom_n_addr_cells(). However, according to a comment
-		on earlier versions, it's always zero, so we don't bother */
-	offset = dma_window[1] >>  PAGE_SHIFT;
+	of_parse_dma_window(dev->dev.platform_data, dma_window,
+			&tbl->it_index, &offset, &size);
 
 	/* TCE table size - measured in tce entries */
-	newTceTable->it_size		= dma_window[4] >> PAGE_SHIFT;
+	tbl->it_size	= size >> PAGE_SHIFT;
 	/* offset for VIO should always be 0 */
-	newTceTable->it_offset		= offset;
-	newTceTable->it_busno		= 0;
-	newTceTable->it_index		= (unsigned long)dma_window[0];
-	newTceTable->it_type		= TCE_VB;
+	tbl->it_offset	= offset >> PAGE_SHIFT;
+	tbl->it_busno	= 0;
+	tbl->it_type	= TCE_VB;
 
-	return iommu_init_table(newTceTable);
+	return iommu_init_table(tbl);
 }

/**

_______________________________________________
Linuxppc-dev mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-dev