Skip to contentSkip to conversation

New way of setting keycodes to scancodes

DISCUSSION Marvin Raaijmakers 1 participant 1 message Jun 9, 2006

lore
Share & tools
lore
#0 lore raw

Hello,

Currently it isn't possible to assign keycodes to keys of USB keyboards by usign a userspace application. This is because USB keyboards do not send scancodes, but HID usage codes. I have modified the hid-input driver so that keycodes can be set to HID usage codes in exactly the same way as keycodes are set to scancodes.
To make this possible I had to modify the input_dev structure (in <linux/input.h>) by adding a "setkeycodes" member to it. This member is a pointer to a function that sets the keycodes to scancodes (and HID usage codes). Each driver has its own "setkeycodes" function and if a driver does not provide the functionality to set keycodes, the pointer will be NULL. The evdev_ioctl function will call the "setkeycode" function if its cmd parameter is equal to EVIOCSKEYCODE.
All keyboard drivers now have a setkeycode function, including the hid-input driver. Note that hid-usage codes are handled the same way as scancodes.
The keycodemax, keycodesize and keycode member are not removed from the input_dev structure so that the old way of setting a keycode (by using the setkeycodes program) can still be used.
The files I modified can be downloaded from:
http://marvin.linux-box.nl/files/kernel_mod.tar.gz (note that I used the source files from kernel 2.6.15)

Below you can see a simple application for setting keycodes:
----------------
#include <linux/input.h>
#include <fcntl.h>
#include <stdio.h>
#include <stdlib.h>

int
main (int argc, char **argv)

{
	int fd;
	struct input_keycode2scancode scan2key;
	
	if (argc < 4)
	{
		printf ("Usage: %s /dev/input/eventX scancode keycode\n", argv[0]);
		printf ("Where X = input device number\n");
		return 1;
	}
	
	if ((fd = open(argv[1], O_RDONLY)) < 0)
	{
		perror (argv[0]);
		return 1;
	}
	
	scan2key.scancode = (unsigned) strtol(argv[2], NULL, 0);
	scan2key.keycode = (unsigned) strtol(argv[3], NULL, 0);
	ioctl (fd, EVIOCSKEYCODE, &scan2key);
	
	return 0;
}

----------------

I hope my code will be implemented in the kernel, because with the current code a lot of extra function keys on USB keyboards do not work because they do not have a keycode. My code makes it possible to set a keycode to such key, so that it will work.

Regards,
Marvin Raaijmakers