Skip to contentSkip to conversation

Fix bugzilla # 674 by changing the xm-test Console.py to wait for the command prompt.

PATCH In review Harry Butterworth 2 participants 5 messages Jun 16, 2006 – Jun 19, 2006

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Fix bugzilla # 674 by changing the xm-test Console.py to wait for the command prompt.

Lots of xm-test tests are failing with console timeouts on some machines at the moment. I reproduced the problem and found it was due to some probing activity in the boot process of the -xen kernel. The behaviour of the current xm-test code is to assume that the boot process has finished after performing three one-second waits for input---when the probing activity introduces more than three one-second delays the test suite breaks.

The patch below changes the test suite to wait for the command prompt before attempting to submit a command. The timeout is increased from 3 seconds to 3 minutes but the wait exits early when the prompt is found so the test suite doesn't take any longer to run.

DO NOT APPLY. This patch is FOR REVIEW ONLY at this stage since my python skills are pretty lame and it really needs to get some testing from people who have actually been experiencing problems. For me, xm-test works the same on my machine with and without this patch.

Signed-off-by Harry Butterworth <[email protected]>

tools/xm-test/lib/XmTestLib/Console.py +40 -30
diff -r ee3d10828937 -r 2dcc3cc7118e tools/xm-test/lib/XmTestLib/Console.py
@@ -82,9 +82,6 @@
 
         tty.setraw(self.consoleFd, termios.TCSANOW)
 
-        self.__chewall(self.consoleFd)
-
-
     def __addToHistory(self, line):
         self.historyBuffer.append(line)
         self.historyLines += 1
@@ -120,34 +117,47 @@
         output"""
         self.PROMPT = prompt
 
-
-    def __chewall(self, fd):
+    def __getprompt(self, fd):
         timeout = 0
-        bytes   = 0
-        
-        while timeout < 3:
-            i, o, e = select.select([fd], [], [], 1)
-            if fd in i:
-                try:
-                    foo = os.read(fd, 1)
-                    if self.debugMe:
-                        sys.stdout.write(foo)
-                    bytes += 1
-                except Exception, exn:
-                    raise ConsoleError(str(exn))
-
-            else:
-                timeout += 1
-
-            if self.limit and bytes >= self.limit:
+        bytes = 0
+        while timeout < 180:
+            # eat anything while total bytes less than limit else raise RUNAWAY
+            while (not self.limit) or (bytes < self.limit):
+                i, o, e = select.select([fd], [], [], 1)
+                if fd in i:
+                    try:
+                        foo = os.read(fd, 1)
+                        if self.debugMe:
+                            sys.stdout.write(foo)
+                        bytes += 1
+                    except Exception, exn:
+                        raise ConsoleError(str(exn))
+                else:
+                    break
+            else:
                 raise ConsoleError("Console run-away (exceeded %i bytes)"
                                    % self.limit, RUNAWAY)
-
-        if self.debugMe:
-            print "Ignored %i bytes of miscellaneous console output" % bytes
-        
-        return bytes
-
+            # press enter
+            os.write(self.consoleFd, "\n")
+            # look for prompt
+            for prompt_char in "\r\n" + self.PROMPT:
+                i, o, e = select.select([fd], [], [], 1)
+                if fd in i:
+                    try:
+                        foo = os.read(fd, 1)
+                        if self.debugMe:
+                            sys.stdout.write(foo)
+                        if foo != prompt_char:
+                            break
+                    except Exception, exn:
+                        raise ConsoleError(str(exn))
+                else:
+                    timeout += 1
+                    break
+            else:
+                break
+        else:
+            raise ConsoleError("Timed out waiting for console prompt")
 
     def __runCmd(self, command, saveHistory=True):
         output = ""
@@ -155,7 +165,7 @@
         lines  = 0
         bytes  = 0
 
-        self.__chewall(self.consoleFd)
+        self.__getprompt(self.consoleFd)
 
         if verbose:
             print "[%s] Sending `%s'" % (self.domain, command)
@@ -176,7 +186,7 @@
                         "Failed to read from console (fd=%i): %s" %
                         (self.consoleFd, exn))
             else:
-                raise ConsoleError("Timed out waiting for console")
+                raise ConsoleError("Timed out waiting for console command")
 
             if self.limit and bytes >= self.limit:
                 raise ConsoleError("Console run-away (exceeded %i bytes)"

_______________________________________________
Xen-devel mailing list
[email protected]
http://lists.xensource.com/xen-devel

#1 lore raw

Harry,

I tested your patch on two machines--lots of failures, not sure related to your changes. Attached are the logs.

Quoted 127 lines · Harry Butterworth

Lots of xm-test tests are failing with console timeouts on some machines at the moment. I reproduced the problem and found it was due to some probing activity in the boot process of the -xen kernel. The behaviour of the current xm-test code is to assume that the boot process has finished after performing three one-second waits for input---when the probing activity introduces more than three one-second delays the test suite breaks.

The patch below changes the test suite to wait for the command prompt before attempting to submit a command. The timeout is increased from 3 seconds to 3 minutes but the wait exits early when the prompt is found so the test suite doesn't take any longer to run.

DO NOT APPLY. This patch is FOR REVIEW ONLY at this stage since my python skills are pretty lame and it really needs to get some testing from people who have actually been experiencing problems. For me, xm-test works the same on my machine with and without this patch.

Signed-off-by Harry Butterworth <[email protected]>

------------------------------------------------------------------------

diff -r ee3d10828937 -r 2dcc3cc7118e tools/xm-test/lib/XmTestLib/Console.py

tools/xm-test/lib/XmTestLib/Console.py +40 -30
@@ -82,9 +82,6 @@
 
         tty.setraw(self.consoleFd, termios.TCSANOW)
 
-        self.__chewall(self.consoleFd)
-
-
     def __addToHistory(self, line):
         self.historyBuffer.append(line)
         self.historyLines += 1
@@ -120,34 +117,47 @@
         output"""
         self.PROMPT = prompt
 
-
-    def __chewall(self, fd):
+    def __getprompt(self, fd):
         timeout = 0
-        bytes   = 0
-        
-        while timeout < 3:
-            i, o, e = select.select([fd], [], [], 1)
-            if fd in i:
-                try:
-                    foo = os.read(fd, 1)
-                    if self.debugMe:
-                        sys.stdout.write(foo)
-                    bytes += 1
-                except Exception, exn:
-                    raise ConsoleError(str(exn))
-
-            else:
-                timeout += 1
-
-            if self.limit and bytes >= self.limit:
+        bytes = 0
+        while timeout < 180:
+            # eat anything while total bytes less than limit else raise RUNAWAY
+            while (not self.limit) or (bytes < self.limit):
+                i, o, e = select.select([fd], [], [], 1)
+                if fd in i:
+                    try:
+                        foo = os.read(fd, 1)
+                        if self.debugMe:
+                            sys.stdout.write(foo)
+                        bytes += 1
+                    except Exception, exn:
+                        raise ConsoleError(str(exn))
+                else:
+                    break
+            else:
                 raise ConsoleError("Console run-away (exceeded %i bytes)"
                                    % self.limit, RUNAWAY)
-
-        if self.debugMe:
-            print "Ignored %i bytes of miscellaneous console output" % bytes
-        
-        return bytes
-
+            # press enter
+            os.write(self.consoleFd, "\n")
+            # look for prompt
+            for prompt_char in "\r\n" + self.PROMPT:
+                i, o, e = select.select([fd], [], [], 1)
+                if fd in i:
+                    try:
+                        foo = os.read(fd, 1)
+                        if self.debugMe:
+                            sys.stdout.write(foo)
+                        if foo != prompt_char:
+                            break
+                    except Exception, exn:
+                        raise ConsoleError(str(exn))
+                else:
+                    timeout += 1
+                    break
+            else:
+                break
+        else:
+            raise ConsoleError("Timed out waiting for console prompt")
 
     def __runCmd(self, command, saveHistory=True):
         output = ""
@@ -155,7 +165,7 @@
         lines  = 0
         bytes  = 0
 
-        self.__chewall(self.consoleFd)
+        self.__getprompt(self.consoleFd)
 
         if verbose:
             print "[%s] Sending `%s'" % (self.domain, command)
@@ -176,7 +186,7 @@
                         "Failed to read from console (fd=%i): %s" %
                         (self.consoleFd, exn))
             else:
-                raise ConsoleError("Timed out waiting for console")
+                raise ConsoleError("Timed out waiting for console command")
 
             if self.limit and bytes >= self.limit:
                 raise ConsoleError("Console run-away (exceeded %i bytes)"
Signature · 9 lines
Regards,

David F Barrera
Linux Technology Center
Systems and Technology Group, IBM

"The wisest men follow their own direction. "
	
                         Euripides

_______________________________________________
Xen-devel mailing list
[email protected]
http://lists.xensource.com/xen-devel

#2 lore raw
Quoted 4 lines · David F Barrera

Harry,

I tested your patch on two machines--lots of failures, not sure related to your changes. Attached are the logs.

Quite a lot of the failures are from Thursday which was before I wrote the patch so I think there is a good chance that those are not related. Of the remainder, I there is one instance of a "timed out waiting for console prompt" which is the new timeout in my patch but this is for the memset_random test which fails for me for a different reason so the timeout is probably correct in this case.

The remainder seem to be completely unrelated. So, I think my patch is probably good and the rest of your problems are probably just more issues in the xm-test code or possibly real bugs.

Harry

#3 lore raw
In reply to Harry Butterworth

Harry,

I tested your patch. I would like you to look at the logs as there are lots of failures. Please contact me and I will tell you where to get the logs (I tried sending them, but the file is probably too big).

Quoted 134 lines · Harry Butterworth

Lots of xm-test tests are failing with console timeouts on some machines at the moment. I reproduced the problem and found it was due to some probing activity in the boot process of the -xen kernel. The behaviour of the current xm-test code is to assume that the boot process has finished after performing three one-second waits for input---when the probing activity introduces more than three one-second delays the test suite breaks.

The patch below changes the test suite to wait for the command prompt before attempting to submit a command. The timeout is increased from 3 seconds to 3 minutes but the wait exits early when the prompt is found so the test suite doesn't take any longer to run.

DO NOT APPLY. This patch is FOR REVIEW ONLY at this stage since my python skills are pretty lame and it really needs to get some testing from people who have actually been experiencing problems. For me, xm-test works the same on my machine with and without this patch.

Signed-off-by Harry Butterworth <[email protected]>

------------------------------------------------------------------------

diff -r ee3d10828937 -r 2dcc3cc7118e tools/xm-test/lib/XmTestLib/Console.py

tools/xm-test/lib/XmTestLib/Console.py +40 -31
@@ -82,9 +82,6 @@
 
         tty.setraw(self.consoleFd, termios.TCSANOW)
 
-        self.__chewall(self.consoleFd)
-
-
     def __addToHistory(self, line):
         self.historyBuffer.append(line)
         self.historyLines += 1
@@ -120,34 +117,47 @@
         output"""
         self.PROMPT = prompt
 
-
-    def __chewall(self, fd):
+    def __getprompt(self, fd):
         timeout = 0
-        bytes   = 0
-        
-        while timeout < 3:
-            i, o, e = select.select([fd], [], [], 1)
-            if fd in i:
-                try:
-                    foo = os.read(fd, 1)
-                    if self.debugMe:
-                        sys.stdout.write(foo)
-                    bytes += 1
-                except Exception, exn:
-                    raise ConsoleError(str(exn))
-
-            else:
-                timeout += 1
-
-            if self.limit and bytes >= self.limit:
+        bytes = 0
+        while timeout < 180:
+            # eat anything while total bytes less than limit else raise RUNAWAY
+            while (not self.limit) or (bytes < self.limit):
+                i, o, e = select.select([fd], [], [], 1)
+                if fd in i:
+                    try:
+                        foo = os.read(fd, 1)
+                        if self.debugMe:
+                            sys.stdout.write(foo)
+                        bytes += 1
+                    except Exception, exn:
+                        raise ConsoleError(str(exn))
+                else:
+                    break
+            else:
                 raise ConsoleError("Console run-away (exceeded %i bytes)"
                                    % self.limit, RUNAWAY)
-
-        if self.debugMe:
-            print "Ignored %i bytes of miscellaneous console output" % bytes
-        
-        return bytes
-
+            # press enter
+            os.write(self.consoleFd, "\n")
+            # look for prompt
+            for prompt_char in "\r\n" + self.PROMPT:
+                i, o, e = select.select([fd], [], [], 1)
+                if fd in i:
+                    try:
+                        foo = os.read(fd, 1)
+                        if self.debugMe:
+                            sys.stdout.write(foo)
+                        if foo != prompt_char:
+                            break
+                    except Exception, exn:
+                        raise ConsoleError(str(exn))
+                else:
+                    timeout += 1
+                    break
+            else:
+                break
+        else:
+            raise ConsoleError("Timed out waiting for console prompt")
 
     def __runCmd(self, command, saveHistory=True):
         output = ""
@@ -155,7 +165,7 @@
         lines  = 0
         bytes  = 0
 
-        self.__chewall(self.consoleFd)
+        self.__getprompt(self.consoleFd)
 
         if verbose:
             print "[%s] Sending `%s'" % (self.domain, command)
@@ -176,7 +186,7 @@
                         "Failed to read from console (fd=%i): %s" %
                         (self.consoleFd, exn))
             else:
-                raise ConsoleError("Timed out waiting for console")
+                raise ConsoleError("Timed out waiting for console command")
 
             if self.limit and bytes >= self.limit:
                 raise ConsoleError("Console run-away (exceeded %i bytes)"
 
------------------------------------------------------------------------

_______________________________________________
Xen-devel mailing list
[email protected]
http://lists.xensource.com/xen-devel

Signature · 9 lines
Regards,

David F Barrera
Linux Technology Center
Systems and Technology Group, IBM

"The wisest men follow their own direction. "
	
                         Euripides
#4 lore raw
In reply to Harry Butterworth

Harry,

I tested your patch against the same code base as with the xm-test ran without your patch. The results look much better. Attached are the xm-test reports from both runs, with and without your patch, on two machines, one a SLES 9 based x335, and the other a RHEL 4 based HS20 Blade running a 32-bit OS.

Quoted 134 lines · Harry Butterworth

Lots of xm-test tests are failing with console timeouts on some machines at the moment. I reproduced the problem and found it was due to some probing activity in the boot process of the -xen kernel. The behaviour of the current xm-test code is to assume that the boot process has finished after performing three one-second waits for input---when the probing activity introduces more than three one-second delays the test suite breaks.

The patch below changes the test suite to wait for the command prompt before attempting to submit a command. The timeout is increased from 3 seconds to 3 minutes but the wait exits early when the prompt is found so the test suite doesn't take any longer to run.

DO NOT APPLY. This patch is FOR REVIEW ONLY at this stage since my python skills are pretty lame and it really needs to get some testing from people who have actually been experiencing problems. For me, xm-test works the same on my machine with and without this patch.

Signed-off-by Harry Butterworth <[email protected]>

------------------------------------------------------------------------

diff -r ee3d10828937 -r 2dcc3cc7118e tools/xm-test/lib/XmTestLib/Console.py

tools/xm-test/lib/XmTestLib/Console.py +40 -31
@@ -82,9 +82,6 @@
 
         tty.setraw(self.consoleFd, termios.TCSANOW)
 
-        self.__chewall(self.consoleFd)
-
-
     def __addToHistory(self, line):
         self.historyBuffer.append(line)
         self.historyLines += 1
@@ -120,34 +117,47 @@
         output"""
         self.PROMPT = prompt
 
-
-    def __chewall(self, fd):
+    def __getprompt(self, fd):
         timeout = 0
-        bytes   = 0
-        
-        while timeout < 3:
-            i, o, e = select.select([fd], [], [], 1)
-            if fd in i:
-                try:
-                    foo = os.read(fd, 1)
-                    if self.debugMe:
-                        sys.stdout.write(foo)
-                    bytes += 1
-                except Exception, exn:
-                    raise ConsoleError(str(exn))
-
-            else:
-                timeout += 1
-
-            if self.limit and bytes >= self.limit:
+        bytes = 0
+        while timeout < 180:
+            # eat anything while total bytes less than limit else raise RUNAWAY
+            while (not self.limit) or (bytes < self.limit):
+                i, o, e = select.select([fd], [], [], 1)
+                if fd in i:
+                    try:
+                        foo = os.read(fd, 1)
+                        if self.debugMe:
+                            sys.stdout.write(foo)
+                        bytes += 1
+                    except Exception, exn:
+                        raise ConsoleError(str(exn))
+                else:
+                    break
+            else:
                 raise ConsoleError("Console run-away (exceeded %i bytes)"
                                    % self.limit, RUNAWAY)
-
-        if self.debugMe:
-            print "Ignored %i bytes of miscellaneous console output" % bytes
-        
-        return bytes
-
+            # press enter
+            os.write(self.consoleFd, "\n")
+            # look for prompt
+            for prompt_char in "\r\n" + self.PROMPT:
+                i, o, e = select.select([fd], [], [], 1)
+                if fd in i:
+                    try:
+                        foo = os.read(fd, 1)
+                        if self.debugMe:
+                            sys.stdout.write(foo)
+                        if foo != prompt_char:
+                            break
+                    except Exception, exn:
+                        raise ConsoleError(str(exn))
+                else:
+                    timeout += 1
+                    break
+            else:
+                break
+        else:
+            raise ConsoleError("Timed out waiting for console prompt")
 
     def __runCmd(self, command, saveHistory=True):
         output = ""
@@ -155,7 +165,7 @@
         lines  = 0
         bytes  = 0
 
-        self.__chewall(self.consoleFd)
+        self.__getprompt(self.consoleFd)
 
         if verbose:
             print "[%s] Sending `%s'" % (self.domain, command)
@@ -176,7 +186,7 @@
                         "Failed to read from console (fd=%i): %s" %
                         (self.consoleFd, exn))
             else:
-                raise ConsoleError("Timed out waiting for console")
+                raise ConsoleError("Timed out waiting for console command")
 
             if self.limit and bytes >= self.limit:
                 raise ConsoleError("Console run-away (exceeded %i bytes)"
 
------------------------------------------------------------------------

_______________________________________________
Xen-devel mailing list
[email protected]
http://lists.xensource.com/xen-devel

Signature · 9 lines
Regards,

David F Barrera
Linux Technology Center
Systems and Technology Group, IBM

"The wisest men follow their own direction. "
	
                         Euripides

Xm-test execution summary:
PASS: 99
FAIL: 18
XPASS: 0
XFAIL: 3

Details:

FAIL: 01_block_attach_device_pos
block-attach failed device did not switch to Connected state

FAIL: 02_block_attach_file_device_pos
block-attach failed device did not switch to Connected state

FAIL: 04_block_attach_device_repeatedly_pos
Device is not actually attached to domU

FAIL: 05_block_attach_and_dettach_device_repeatedly_pos
block-attach failed device did not switch to Connected state

FAIL: 09_block_attach_and_dettach_device_check_data_pos

	 xm block-attach returned invalid 256 != 0

FAIL: 12_block_attach_shared_domU
Unable to start domain

FAIL: 01_block-destroy_btblock_pos
Unable to create domain

FAIL: 02_block-destroy_rtblock_pos

	 xm block-attach returned invalid 256 != 0

FAIL: 05_block-destroy_byname_pos
Unable to create domain

FAIL: 13_create_multinic_pos
(0 nics) Failed to create domain

FAIL: 14_create_blockroot_pos
Failed to create domain

FAIL: 03_memset_random_pos
Timed out waiting for console prompt

FAIL: 01_migrate_localhost_pos

	 xm migrate returned invalid 256 != 0

XFAIL: 02_network_local_ping_pos
ping loopback failed for size 65507. ping eth0 failed for size 65507.

XFAIL: 05_network_dom0_ping_pos
Ping to dom0 failed for size 65507.

XFAIL: 11_network_domU_ping_pos

	 Ping failed for size 1 48 64 512 1440 1500 1505 4096 4192 32767 65507.

FAIL: 12_network_domU_tcp_pos

	 TCP hping2 failed for size 16384 24567 32767 65495.

FAIL: 13_network_domU_udp_pos

	 UDP hping2 failed for size 32767 65495.

Xm-test execution summary:
PASS: 69
FAIL: 48
XPASS: 0
XFAIL: 3

Details:

FAIL: 01_block_attach_device_pos

FAIL: 02_block_attach_file_device_pos
Unknown reason

FAIL: 04_block_attach_device_repeatedly_pos
Unknown reason

FAIL: 05_block_attach_and_dettach_device_repeatedly_pos
Unknown reason

FAIL: 07_block_attach_baddevice_neg
Unknown reason

FAIL: 08_block_attach_bad_filedevice_neg
Unknown reason

FAIL: 09_block_attach_and_dettach_device_check_data_pos
Unknown reason

FAIL: 12_block_attach_shared_domU
Unknown reason

FAIL: 01_block-destroy_btblock_pos
Unknown reason

FAIL: 02_block-destroy_rtblock_pos
Unknown reason

FAIL: 06_block-destroy_check_list_pos
Unknown reason

FAIL: 01_block-list_pos
Unknown reason

FAIL: 03_block-list_anotherbd_pos
Unknown reason

FAIL: 06_block-list_checkremove_pos
block-detach failed device did not disappear

FAIL: 01_block_device_read_verify
Unknown reason

FAIL: 02_block_device_write_verify
Unknown reason

FAIL: 01_create_basic_pos
Unknown reason

FAIL: 11_create_concurrent_pos
Unknown reason

FAIL: 12_create_concurrent_stress_pos
Unknown reason

FAIL: 13_create_multinic_pos
Unknown reason

FAIL: 14_create_blockroot_pos
Unknown reason

FAIL: 15_create_smallmem_pos
Unknown reason

FAIL: 01_destroy_basic_pos
Unknown reason

FAIL: 07_destroy_stale_pos
Unknown reason

FAIL: 04_list_goodparm_pos
Unknown reason

FAIL: 03_memset_random_pos
Unknown reason

FAIL: 04_memset_smallmem_pos
Unknown reason

FAIL: 01_migrate_localhost_pos

	 xm migrate returned invalid 256 != 0

XFAIL: 02_network_local_ping_pos
Failed to create domain

FAIL: 03_network_local_tcp_pos
Failed to create domain

FAIL: 04_network_local_udp_pos
Unknown reason

XFAIL: 05_network_dom0_ping_pos
Ping to dom0 failed for size 65507.

FAIL: 06_network_dom0_tcp_pos
Unknown reason

FAIL: 07_network_dom0_udp_pos
Failed to create domain

XFAIL: 11_network_domU_ping_pos
Failed to create domain

FAIL: 12_network_domU_tcp_pos
Failed to create domain

FAIL: 13_network_domU_udp_pos
Failed to create domain

FAIL: 01_network_attach_pos
Unknown reason

FAIL: 02_network_attach_detach_pos
Unknown reason

FAIL: 03_network_attach_detach_multiple_pos

	 xm network-attach returned invalid 256 != 0

FAIL: 01_pause_basic_pos
Unknown reason

FAIL: 01_reboot_basic_pos
Unknown reason

FAIL: 01_restore_basic_pos
Unknown reason

FAIL: 04_restore_withdevices_pos
Failed to create domain

FAIL: 01_save_basic_pos
Unknown reason

FAIL: 03_save_bogusfile_neg
Unknown reason

FAIL: 03_sysrq_withreboot_pos
Unknown reason

FAIL: 01_unpause_basic_pos
Unknown reason

Xm-test execution summary:
PASS: 105
FAIL: 11
XPASS: 0
XFAIL: 3

Details:

FAIL: 01_block_attach_device_pos
block-attach failed device did not switch to Connected state

FAIL: 02_block_attach_file_device_pos
block-attach failed device did not switch to Connected state

FAIL: 04_block_attach_device_repeatedly_pos
Device is not actually attached to domU

FAIL: 05_block_attach_and_dettach_device_repeatedly_pos
block-attach failed device did not switch to Connected state

XFAIL: 02_network_local_ping_pos
ping loopback failed for size 65507. ping eth0 failed for size 65507.

XFAIL: 05_network_dom0_ping_pos

	 Ping to dom0 failed for size 1440 1500 1505 4096 65507.

FAIL: 06_network_dom0_tcp_pos

	 TCP hping2 to dom0 failed for size 4096 4192 32767.

FAIL: 07_network_dom0_udp_pos

	 UDP hping2 to dom0 failed for size 64 512 1440 1500 1505 4096 32767 65495.

XFAIL: 11_network_domU_ping_pos

	 Ping failed for size 1 48 64 512 1440 1500 1505 4096 4192 32767 65507.

FAIL: 12_network_domU_tcp_pos

	 TCP hping2 failed for size 16384 24567 32767 65495.

FAIL: 13_network_domU_udp_pos

	 UDP hping2 failed for size 32767 65495.

Xm-test execution summary:
PASS: 68
FAIL: 48
XPASS: 0
XFAIL: 3

Details:

FAIL: 01_block_attach_device_pos

FAIL: 02_block_attach_file_device_pos
block-attach failed device did not switch to Connected state

FAIL: 04_block_attach_device_repeatedly_pos
Unknown reason

FAIL: 05_block_attach_and_dettach_device_repeatedly_pos
Unknown reason

FAIL: 07_block_attach_baddevice_neg
Unknown reason

FAIL: 09_block_attach_and_dettach_device_check_data_pos
Unknown reason

FAIL: 12_block_attach_shared_domU
Unknown reason

FAIL: 01_block-destroy_btblock_pos
Unknown reason

FAIL: 02_block-destroy_rtblock_pos
Unknown reason

FAIL: 05_block-destroy_byname_pos
Unknown reason

FAIL: 06_block-destroy_check_list_pos
Unknown reason

FAIL: 01_block-list_pos
Unknown reason

FAIL: 02_block-list_attachbd_pos
Unknown reason

FAIL: 03_block-list_anotherbd_pos
Unknown reason

FAIL: 01_block_device_read_verify
Unknown reason

FAIL: 02_block_device_write_verify
Unknown reason

FAIL: 01_create_basic_pos
Unknown reason

FAIL: 11_create_concurrent_pos
Unknown reason

FAIL: 12_create_concurrent_stress_pos
Unknown reason

FAIL: 13_create_multinic_pos
Unknown reason

FAIL: 14_create_blockroot_pos
Unknown reason

FAIL: 15_create_smallmem_pos
Unknown reason

FAIL: 01_destroy_basic_pos
Unknown reason

FAIL: 07_destroy_stale_pos
Unknown reason

FAIL: 04_list_goodparm_pos
Unknown reason

FAIL: 01_memset_basic_pos
Unknown reason

FAIL: 03_memset_random_pos
Unknown reason

FAIL: 04_memset_smallmem_pos
Unknown reason

FAIL: 01_migrate_localhost_pos
Unknown reason

XFAIL: 02_network_local_ping_pos
ping loopback failed for size 65507. ping eth0 failed for size 65507.

FAIL: 03_network_local_tcp_pos
Unknown reason

XFAIL: 05_network_dom0_ping_pos
Unknown reason

FAIL: 06_network_dom0_tcp_pos
Unknown reason

FAIL: 07_network_dom0_udp_pos
Unknown reason

XFAIL: 11_network_domU_ping_pos

	 Ping failed for size 1 48 64 512 1440 1500 1505 4096 4192 32767 65507.

FAIL: 12_network_domU_tcp_pos
Unknown reason

FAIL: 13_network_domU_udp_pos

	 UDP hping2 failed for size 32767 65495.

FAIL: 01_network_attach_pos
Unknown reason

FAIL: 03_network_attach_detach_multiple_pos
Unknown reason

FAIL: 01_pause_basic_pos
Unknown reason

FAIL: 01_reboot_basic_pos
Unknown reason

FAIL: 01_restore_basic_pos
Unknown reason

FAIL: 04_restore_withdevices_pos
Unknown reason

FAIL: 03_save_bogusfile_neg
Unknown reason

FAIL: 01_shutdown_basic_pos
Unknown reason

FAIL: 02_sysrq_sync_pos
Unknown reason

FAIL: 03_sysrq_withreboot_pos
Unknown reason

FAIL: 01_unpause_basic_pos
Unknown reason

_______________________________________________
Xen-devel mailing list
[email protected]
http://lists.xensource.com/xen-devel