lm83: Add LM82 support
Subsystems (3)
PATCH 1/44 lm83: Add LM82 support
From: Jordan Crouse <jordan.crouse at amd.com>
Add LM82 temperature sensor support (similar to the LM83, but less featureful).
Signed-off-by Jordan Crouse <jordan.crouse at amd.com>
Signed-off-by Jean Delvare <khali at linux-fr.org>
Signed-off-by Greg Kroah-Hartman <gregkh at suse.de>
--- Documentation/hwmon/lm83 | 16 +++++++++++---- drivers/hwmon/Kconfig | 4 ++-- drivers/hwmon/lm83.c | 50 ++++++++++++++++++++++++++++++++++------------ 3 files changed, 51 insertions(+), 19 deletions(-)
Documentation/hwmon/lm83 +12 -4
@@ -7,6 +7,10 @@ Supported chips: Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e Datasheet: Publicly available at the National Semiconductor website http://www.national.com/pf/LM/LM83.html + * National Semiconductor LM82 + Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e + Datasheet: Publicly available at the National Semiconductor website + http://www.national.com/pf/LM/LM82.html Author: Jean Delvare <khali at linux-fr.org>
@@ -15,10 +19,11 @@ Description ----------- The LM83 is a digital temperature sensor. It senses its own temperature as -well as the temperature of up to three external diodes. It is compatible -with many other devices such as the LM84 and all other ADM1021 clones. -The main difference between the LM83 and the LM84 in that the later can -only sense the temperature of one external diode. +well as the temperature of up to three external diodes. The LM82 is +a stripped down version of the LM83 that only supports one external diode. +Both are compatible with many other devices such as the LM84 and all +other ADM1021 clones. The main difference between the LM83 and the LM84 +in that the later can only sense the temperature of one external diode. Using the adm1021 driver for a LM83 should work, but only two temperatures will be reported instead of four.
@@ -36,6 +41,9 @@ Unconfirmed motherboards: Iwill MPX2 Soltek SL-75DRV5 +The LM82 is confirmed to have been found on most AMD Geode reference +designs and test platforms. + The driver has been successfully tested by Magnus Forsstr?m, who I'd like to thank here. More testers will be of course welcome.
drivers/hwmon/Kconfig +2 -2
@@ -236,11 +236,11 @@ config SENSORS_LM80 will be called lm80. config SENSORS_LM83 - tristate "National Semiconductor LM83" + tristate "National Semiconductor LM83 and compatibles" depends on HWMON && I2C help If you say yes here you get support for National Semiconductor - LM83 sensor chips. + LM82 and LM83 sensor chips. This driver can also be built as a module. If so, the module will be called lm83.
drivers/hwmon/lm83.c +37 -13
94 lines not on this page · raw message
Signature · 1 line
1.4.0