cmd64x not happy about being hotplugged, 2.6.17
I have a thinkpad dock 2 which includes a Silicon Image CMD648 IDE controller (1095:0648 (rev 01)) for the UltraBay2000 slot. The dock now works as an acpiphp PCI hotplug device, and the PCI devs get detected safely and removed more or less safely when undocking. The cmd64x doesn't seem to handle the hotplugging as well. When it is attached, it doesn't enumerate the CDRW device that is connected to it (although the drive works if it is inserted at boot time.). When the laptop is undocked, cmd64x seems not to notice at all. Any further access to it, such as "cat /proc/ide/cmd64x", will cause a segfault as seen here:
http://downloads.emperorlinux.com/support/misc/bug.txt
Let me know if there's any further information I can provide. Thanks!
Signature · 1 line
Josh Litherland ([email protected])
Ar Gwe, 2006-06-23 am 11:35 -0400, ysgrifennodd Josh Litherland:
Quoted 3 lines
I have a thinkpad dock 2 which includes a Silicon Image CMD648 IDE controller (1095:0648 (rev 01)) for the UltraBay2000 slot. The dock now works as an acpiphp PCI hotplug device, and the PCI devs get detected
drivers/ide does not support hotplug except in 2.4-ac and sort-of (if the device is closed entirely) in Red Hat Enterprise Linux 4. You'll have to ask Bartlomiej if he has any plans to fix that for 2.6 proper.
The new libata layer has hotplug work afoot which should deal with this, although the CMD648 driver for it is very experimental as the 648 is pretty rare nowdays
Alan