Typo in drivers/net/e1000/e1000_hw.c
PATCH 1/1 Typo in drivers/net/e1000/e1000_hw.c
hi,
spotted by coverity (id #539), we should use the define with which the array is defined. We use min_agc as index for e1000_igp_2_cable_length_table[IGP02E1000_AGC_LENGTH_TABLE_SIZE] This patch also adds the -1 to make it safe so that we dont read past the end of the array.
drivers/net/e1000/e1000_hw.c renamed from drivers/net/e1000/e1000_hw.c.orig +1 -1
@@ -6012,7 +6012,7 @@ e1000_get_cable_length(struct e1000_hw * {int32_t ret_val;uint16_t agc_value =0 ; -uint16_t cur_agc, min_agc =IGP01E1000_AGC_LENGTH_TABLE_SIZE ; +uint16_t cur_agc, min_agc =IGP02E1000_AGC_LENGTH_TABLE_SIZE -1 ;uint16_t max_agc =0 ;uint16_t i, phy_data;uint16_t cable_length;
Quoted 24 lines · Eric Sesterhenn
hi,
spotted by coverity (id #539), we should use the define with which the array is defined. We use
min_agcas index for e1000_igp_2_cable_length_table[IGP02E1000_AGC_LENGTH_TABLE_SIZE] This patch also adds the -1 to make it safe so that we dont read past the end of the array.Signed-off-by Eric Sesterhenn <[email protected]>drivers/net/e1000/e1000_hw.c 2006-06-28 21:47:07.000000000 +0200 renamed from drivers/net/e1000/e1000_hw.c.orig 2006-06-28 21:46:55.000000000 +0200 +1
-2@@ -6012,7 +6012,7 @@ e1000_get_cable_length(struct e1000_hw * { int32_t ret_val; uint16_t agc_value = 0; - uint16_t cur_agc, min_agc = IGP01E1000_AGC_LENGTH_TABLE_SIZE; + uint16_t cur_agc, min_agc = IGP02E1000_AGC_LENGTH_TABLE_SIZE - 1; uint16_t max_agc = 0; uint16_t i, phy_data; uint16_t cable_length; -
Quoted 5 lines
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
NACK. This is corrected in the latest patch series that Auke submitted to the kernel. The correction is in [PATCH 18/21] e1000:
integrate ich8 support into driver.
Signature · 2 lines
Cheers, Jeff