powerpc: Fix MPIC sense codes in doc

PATCH New Benjamin Herrenschmidt 1 participant 1 message Aug 29, 2006 Documentation

lore

Share & tools

lore

Benjamin Herrenschmidt

author

2006-08-29 22:58 UTC #0 lore raw

PATCH 1/1 powerpc: Fix MPIC sense codes in doc

The booting-without-of.txt had incorrect definition for the sense codes for an OpenPIC controller

Signed-off-by Benjamin Herrenschmidt <[email protected]>

Documentation/powerpc/booting-without-of.txt +3 -3

Index: linux-work/Documentation/powerpc/booting-without-of.txt
===================================================================
@@ -1136,10 +1136,10 @@
    Devices connected to openPIC-compatible controllers should encode
    sense and polarity as follows:
 
-	0 = high to low edge sensitive type enabled
+	0 = low to high edge sensitive type enabled
 	1 = active low level sensitive type enabled
-	2 = low to high edge sensitive type enabled
-	3 = active high level sensitive type enabled
+	2 = active high level sensitive type enabled
+	3 = high to low edge sensitive type enabled
 
    ISA PIC interrupt controllers should adhere to the ISA PIC
    encodings listed below: