No life from acpi-cpufreq, Pentium D 930, x86_64
I'm running the 2.6.17-1.2174_FC5 x86_64 kernel from FC5 updates on a Dell PowerEdge 830 server with a Pentium D 930 inside. I can modprobe acpi_cpufreq, but it doesn't do anything - there are no kernel log messages, no new sysfs files to look at, nothing in /proc/acpi.
cpufreq-info tells me that I have no cpufreq support, but I had kind of figured that out already :-(
Is there something more I should be doing?
<b
Quoted 9 lines · Bryan O'Sullivan
I'm running the 2.6.17-1.2174_FC5
x86_64kernel from FC5 updates on a Dell PowerEdge 830 server with a Pentium D 930 inside. I can modprobeacpi_cpufreq, but it doesn't do anything - there are no kernel log messages, no new sysfs files to look at, nothing in/proc/acpi.cpufreq-info tells me that I have no cpufreq support, but I had kind of figured that out already :-(
Is there something more I should be doing?
Does the CPU actually support frequency scaling?
What does /proc/cpuinfo say ?
Dave
Quoted 1 line · Dave Jones
Does the CPU actually support frequency scaling?
It would appear not (see below). How strange.
Quoted 1 line
What does
/proc/cpuinfosay ?
Very little:
power management:
I suppose there's not much I can do then.
Thanks,
<b
Quoted 6 lines · Bryan O'Sullivan
Quoted 1 line · Dave Jones
Does the CPU actually support frequency scaling?
It would appear not (see below). How strange.
Quoted 7 lines
Quoted 1 line
What does
/proc/cpuinfosay ?Very little:
power management:
I suppose there's not much I can do then.
The important line is 'flags'. Does that have eist ?
Dave
Quoted 1 line · Dave Jones
The important line is 'flags'. Does that have eist ?
Here's the flags line. No sign of eist, alas:
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall nx lm constant_tsc pni monitor ds_cpl vmx est cid cx16 xtpr lahf_lm
Thanks,
<b
Quoted 4 lines · Bryan O'Sullivan
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall nx lmconstant_tscpni monitords_cplvmx est cid cx16 xtprlahf_lm
EIST is listed as "est" here, so it is present. speedstep-centrino should be able to do something with this.
J