Add support for the MPC8349E-mITX
PATCH 2/2 Add support for the MPC8349E-mITX
Hello list,
inside the automatic U-Boot patch tracking system a new ticket [DNX#2006092142000024] was created:
<snip>
Quoted 99 lines
From: Timur Tabi <[email protected]>
PREREQUISITE PATCHES:
* This patch can only be applied after the following patches have been applied:
1) DNX#2006090742000024 "Add support for multiple I2C buses"
2) DNX#2006090742000033 "Multi-bus I2C implementation of MPC834x"
3) DNX#2006091242000041 "Additional MPC8349 support for multibus i2c"
4) DNX#2006091242000078 "Add support for variable flash memory sizes
on 83xx systems"
5) DNX#2006091242000069 "Add support for Errata DDR6 on MPC 834x
systems"CHANGELOG:
* Add support for the Freescale MPC8349E-mITX reference design platform. The second TSEC (Vitesse 7385 switch) is not supported at this time.
Signed-off-by Timur Tabi <[email protected]>--- CREDITS | 5 MAINTAINERS | 4 MAKEALL | 2 Makefile | 3 README | 4 cpu/mpc83xx/cpu.c | 81 ++++- cpu/mpc83xx/cpu_init.c | 31 ++ cpu/mpc83xx/i2c.c | 2 cpu/mpc83xx/spd_sdram.c | 21 + drivers/tsec.c | 4 include/asm-ppc/immap_83xx.h | 16 + include/configs/MPC8349ITX.h | 753 ++++++++++++++++++++++++++++++++++++++++++ 12 files changed, 918 insertions(+), 8 deletions(-)CREDITS +5
-0@@ -461,3 +461,8 @@ N: James MacAulay E: james.macaulay at amirix.com D: Suppport for Amirix AP1000 W: www.amirix.com + +N: Timur Tabi +E: timur at freescale.com +D: Support for MPC8349E-mITX +W: www.freescale.comMAINTAINERS +4
-0@@ -337,6 +337,10 @@ John Zhan <[email protected]> svm_sc8xx MPC8xx +Timur Tabi <[email protected]> + + MPC8349E-mITX MPC8349 + ------------------------------------------------------------------------- Unknown / orphaned boards:MAKEALL +1
-1@@ -130,7 +130,7 @@ ## MPC83xx Systems (includes 8349, etc.) ######################################################################### LIST_83xx=" \ - TQM834x MPC8349EMDS \ + TQM834x MPC8349EMDS MPC8349ITX \ "Makefile +3
-0@@ -1557,6 +1557,9 @@ TQM834x_config: unconfig MPC8349EMDS_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349emds +MPC8349ITX_config: unconfig + @$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349itx + ######################################################################### ## MPC85xx Systems #########################################################################README +0
-0@@ -2226,6 +2226,10 @@ Low Level (hardware related) configurati If SPD EEPROM is on an I2C bus other than the first one, specify
Quoted 1 line
here.
</snip>
Your U-Boot support team