md: Introduction
Subsystems (4)
PATCH 1/1 md: Introduction
Following are 6 bug fixes and minor improvements for md. Patches are against 2.6.18-mm2 and are all suitable for immediate inclusion in 2.6.19.
Thanks,
NeilBrown
[PATCH 001 of 6] md: Fix duplicity of levels in md.txt
[PATCH 002 of 6] md: Remove MAX_MD_DEVS which is an arbitrary limit. [PATCH 003 of 6] md: Remove 'experimental' classification from raid5 reshape. [PATCH 004 of 6] md: Use ffz instead of find_first_set to convert multiplier to shift. [PATCH 005 of 6] md: Allow SET_BITMAP_FILE to work on 64bit kernel with 32bit userspace. [PATCH 006 of 6] md: Add error reporting to superblock write failure
PATCH 1/1 md: Fix duplicity of levels in md.txt
md.txt has two sections describing the 'level' sysfs attribute, and some of the text is out-of-date. So make just one section, and make it right.
### Diffstat output
./Documentation/md.txt | 17 +++++------------ 1 file changed, 5 insertions(+), 12 deletions(-)
Documentation/md.txt +5 -12
@@ -154,11 +154,12 @@ contains further md-specific information All md devices contain: level - a text file indicating the 'raid level'. This may be a standard - numerical level prefixed by "RAID-" - e.g. "RAID-5", or some - other name such as "linear" or "multipath". + a text file indicating the 'raid level'. e.g. raid0, raid1, + raid5, linear, multipath, faulty. If no raid level has been set yet (array is still being - assembled), this file will be empty. + assembled), the value will reflect whatever has been written + to it, which may be a name like the above, or may be a number + such as '0', '5', etc. raid_disks a text file with a simple number indicating the number of devices
@@ -192,14 +193,6 @@ All md devices contain: 1.2 (newer format in varying locations) or "none" indicating that the kernel isn't managing metadata at all. - level - The raid 'level' for this array. The name will often (but not - always) be the same as the name of the module that implements the - level. To be auto-loaded the module must have an alias - md-$LEVEL e.g. md-raid5 - This can be written only while the array is being assembled, not - after it is started. - layout The "layout" for the array for the particular level. This is simply a number that is interpretted differently by different
PATCH 1/1 md: Remove MAX_MD_DEVS which is an arbitrary limit.
In reply to NeilBrownOnce upon a time we needed to fixed limit to the number of md devices, probably because we preallocated some array. This need no longer exists, but we still have an arbitrary limit.
So remove MAX_MD_DEVS and allow as many devices as we can fit into the 'minor' part of a device number.
Also remove some useless noise at init time (which reports MAX_MD_DEVS) and remove MD_THREAD_NAME_MAX which hasn't been used for a while.
### Diffstat output
./drivers/md/md.c | 33 +++++++++++++++------------------ ./include/linux/raid/md_k.h | 5 +---- ./init/do_mounts_md.c | 8 ++------ 3 files changed, 18 insertions(+), 28 deletions(-)
drivers/md/md.c +15 -18
@@ -3409,6 +3409,7 @@ static void autorun_devices(int part)printk (KERN_INFO "md: autorun ...\n" );while (!list_empty (&pending_raid_disks)) { +int unit;dev_t dev;LIST_HEAD (candidates); rdev0 = list_entry(pending_raid_disks.next,
@@ -3428,16 +3429,19 @@ static void autorun_devices(int part)* mostly sane superblocks. It's time to allocate the * mddev. */ -if (rdev0->preferred_minor <0 || rdev0->preferred_minor >=MAX_MD_DEVS ) { +if (part) { + dev =MKDEV (mdp_major, + rdev0->preferred_minor << MdpMinorShift); + unit =MINOR (dev) >> MdpMinorShift; + }else { + dev =MKDEV (MD_MAJOR , rdev0->preferred_minor); + unit =MINOR (dev); + } +if (rdev0->preferred_minor != unit) {printk (KERN_INFO "md: unit number in %s is bad: %d\n" ,bdevname (rdev0->bdev, b), rdev0->preferred_minor);break ; } -if (part) - dev =MKDEV (mdp_major, - rdev0->preferred_minor << MdpMinorShift); -else - dev =MKDEV (MD_MAJOR , rdev0->preferred_minor);md_probe (dev,NULL ,NULL ); mddev =mddev_find (dev);
@@ -5524,22 +5528,15 @@ static void md_geninit(void)static int __init md_init (void ) { -printk (KERN_INFO "md: md driver %d.%d.%d MAX_MD_DEVS=%d," -" MD_SB_DISKS=%d\n" , -MD_MAJOR_VERSION ,MD_MINOR_VERSION , -MD_PATCHLEVEL_VERSION ,MAX_MD_DEVS ,MD_SB_DISKS ); -printk (KERN_INFO "md: bitmap version %d.%d\n" ,BITMAP_MAJOR_HI , -BITMAP_MINOR ); -if (register_blkdev (MAJOR_NR ,"md" ))return -1 ;if ((mdp_major=register_blkdev (0 ,"mdp" ))<=0 ) {unregister_blkdev (MAJOR_NR ,"md" );return -1 ; } -blk_register_region (MKDEV (MAJOR_NR ,0 ),MAX_MD_DEVS ,THIS_MODULE , - md_probe,NULL ,NULL ); -blk_register_region (MKDEV (mdp_major,0 ),MAX_MD_DEVS <<MdpMinorShift,THIS_MODULE , +blk_register_region (MKDEV (MAJOR_NR ,0 ),1UL <<MINORBITS ,THIS_MODULE , + md_probe,NULL ,NULL ); +blk_register_region (MKDEV (mdp_major,0 ),1UL <<MINORBITS ,THIS_MODULE , md_probe,NULL ,NULL );register_reboot_notifier (&md_notifier);
@@ -5598,8 +5595,8 @@ static __exit void md_exit(void)mddev_t *mddev;struct list_head *tmp; -blk_unregister_region (MKDEV (MAJOR_NR ,0 ),MAX_MD_DEVS ); -blk_unregister_region (MKDEV (mdp_major,0 ),MAX_MD_DEVS << MdpMinorShift); +blk_unregister_region (MKDEV (MAJOR_NR ,0 ),1U <<MINORBITS ); +blk_unregister_region (MKDEV (mdp_major,0 ),1U <<MINORBITS );unregister_blkdev (MAJOR_NR ,"md" );unregister_blkdev (mdp_major,"mdp" );
include/linux/raid/md_k.h +1 -4
@@ -31,18 +31,15 @@#define LEVEL_NONE (-1000000)#define MaxSector (~(sector_t)0) -#define MD_THREAD_NAME_MAX 14typedef struct mddev_s mddev_t ;typedef struct mdk_rdev_s mdk_rdev_t ; -#define MAX_MD_DEVS 256/* Max number of md dev */ -/* * options passed in raidrun: */ -/* Currently this must fix in an 'int' */ +/* Currently this must fit in an 'int' */ #define MAX_CHUNK_SIZE (1<<30)/*
init/do_mounts_md.c +2 -6
@@ -20,7 +20,7 @@ static struct {int level;int chunk;char *device_names; -} md_setup_args[MAX_MD_DEVS ]__initdata ; +} md_setup_args[256 ]__initdata ;static int md_setup_ents__initdata ;
@@ -61,10 +61,6 @@ static int __init md_setup(char *str)return 0 ; } str1 = str; -if (minor >=MAX_MD_DEVS ) { -printk (KERN_WARNING "md: md=%d, Minor device number too high.\n" , minor); -return 0 ; - }for (ent=0 ; ent< md_setup_ents ; ent++)if (md_setup_args[ent].minor == minor && md_setup_args[ent].partitioned == partitioned) {
@@ -72,7 +68,7 @@ static int __init md_setup(char *str) "Replacing previous definition.\n", partitioned?"d":"", minor);break ; } -if (ent >=MAX_MD_DEVS ) { +if (ent >=ARRAY_SIZE (md_setup_args)) {printk (KERN_WARNING "md: md=%s%d - too many md initialisations\n" , partitioned?"d" :"" , minor);return 0 ; }
PATCH 1/1 md: Remove 'experimental' classification from raid5 reshape.
In reply to NeilBrownI have had enough success reports not to believe that this is safe for 2.6.19.
### Diffstat output
./drivers/md/Kconfig | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-)
drivers/md/Kconfig +6 -4
@@ -138,16 +138,16 @@ config MD_RAID456 If unsure, say Y. config MD_RAID5_RESHAPE - bool "Support adding drives to a raid-5 array (experimental)" - depends on MD_RAID456 && EXPERIMENTAL + bool "Support adding drives to a raid-5 array" + depends on MD_RAID456 + default y ---help--- A RAID-5 set can be expanded by adding extra drives. This requires "restriping" the array which means (almost) every block must be written to a different place. This option allows such restriping to be done while the array - is online. However it is still EXPERIMENTAL code. It should - work, but please be sure that you have backups. + is online. You will need mdadm version 2.4.1 or later to use this feature safely. During the early stage of reshape there is
@@ -164,6 +164,8 @@ config MD_RAID5_RESHAPE There should be enough spares already present to make the new array workable. + In unsure, say Y. + config MD_MULTIPATH tristate "Multipath I/O support" depends on BLK_DEV_MD
Re: [PATCH 003 of 6] md: Remove 'experimental' classification from raid5 reshape.
Typo in last line of this patch.
Quoted 1 line
drivers/md/Kconfig +1
-0+ In unsure, say Y.
Re: [PATCH 003 of 6] md: Remove 'experimental' classification from raid5 reshape.
In reply to NeilBrownTypo in first line of this patch :)
Quoted 2 lines
I have had enough success reports not^H^H^H to believe that this is safe for 2.6.19.
PATCH 1/1 md: Use ffz instead of find_first_set to convert multiplier to shift.
In reply to NeilBrownFrom: Paul Clements <[email protected]>
find_first_set doesn't find the least-significant bit on bigendian machines, so it is really wrong to use it.
ffs is closer, but takes an 'int' and we have a 'unsigned long'. So use ffz(~X) to convert a chunksize into a chunkshift.
### Diffstat output
./drivers/md/bitmap.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/md/bitmap.c +1 -2
@@ -1444,8 +1444,7 @@ int bitmap_create(mddev_t *mddev)if (err) goto error; - bitmap->chunkshift =find_first_bit (&bitmap->chunksize, -sizeof (bitmap->chunksize)); + bitmap->chunkshift =ffz (~bitmap->chunksize);/* now that chunksize and chunkshift are set, we can use these macros */ chunks = (blocks + CHUNK_BLOCK_RATIO(bitmap) - 1) /
PATCH 1/1 md: Allow SET_BITMAP_FILE to work on 64bit kernel with 32bit userspace.
In reply to NeilBrownFrom: Paul Clements <[email protected]>
### Diffstat output
./include/linux/compat_ioctl.h | 1 + 1 file changed, 1 insertion(+)
include/linux/compat_ioctl.h +1 -0
@@ -125,6 +125,7 @@ COMPATIBLE_IOCTL(RUN_ARRAY) COMPATIBLE_IOCTL(STOP_ARRAY) COMPATIBLE_IOCTL(STOP_ARRAY_RO) COMPATIBLE_IOCTL(RESTART_ARRAY_RW) +ULONG_IOCTL(SET_BITMAP_FILE) /* DM */ COMPATIBLE_IOCTL(DM_VERSION_32) COMPATIBLE_IOCTL(DM_REMOVE_ALL_32)
PATCH 1/1 md: Add error reporting to superblock write failure
In reply to NeilBrown### Diffstat output
./drivers/md/md.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/md/md.c +5 -1
@@ -389,8 +389,12 @@ static int super_written(struct bio *bioif (bio->bi_size)return 1 ; -if (error || !test_bit (BIO_UPTODATE , &bio->bi_flags)) +if (error || !test_bit (BIO_UPTODATE , &bio->bi_flags)) { +printk ("md: super_written gets error=%d, uptodate=%d\n" , + error,test_bit (BIO_UPTODATE , &bio->bi_flags)); +WARN_ON (test_bit (BIO_UPTODATE , &bio->bi_flags));md_error (mddev, rdev); + }if (atomic_dec_and_test (&mddev->pending_writes))wake_up (&mddev->sb_wait);