ISDN: mark as 32-bit only
PATCH 1/1 ISDN: mark as 32-bit only
Tons of ISDN drivers cast pointers to/from 32-bit values, which just won't work on 64-bit.
drivers/isdn/Kconfig +1 -1
@@ -6,7 +6,7 @@ menu "ISDN subsystem" config ISDN tristate "ISDN support" - depends on NET + depends on NET && 32BIT ---help--- ISDN ("Integrated Services Digital Networks", called RNIS in France) is a special type of fully digital telephone service; it's mostly
Quoted 3 lines
Tons of ISDN drivers cast pointers to/from 32-bit values, which just won't work on 64-bit.
Should not that be fixed instead of restricting isdn to 32bit? Though this is probably the best temporary workaround until someone can fix up all the "tons".
Jan Engelhardt
Quoted 4 lines · Jan Engelhardt
Quoted 2 lines
Tons of ISDN drivers cast pointers to/from 32-bit values, which just won't work on 64-bit.
Should not that be fixed instead of restricting isdn to 32bit?
It hasn't been fixed in many years, and I don't see anyone stepping up to the plate, even with my current trolling... :)
Quoted 1 line
Though this is probably the best temporary workaround until someone can fix up all the "tons".
I have a better workaround, I think.
Jeff
From: Jeff Garzik <[email protected]>
Date: Sun, 01 Oct 2006 23:54:42 -0400
Quoted 6 lines
Quoted 4 lines · Jan Engelhardt
Quoted 2 lines
Tons of ISDN drivers cast pointers to/from 32-bit values, which just won't work on 64-bit.
Should not that be fixed instead of restricting isdn to 32bit?
Quoted 7 lines
It hasn't been fixed in many years, and I don't see anyone stepping up to the plate, even with my current trolling... :)
Quoted 2 lines
Though this is probably the best temporary workaround until someone can fix up all the "tons".
I have a better workaround, I think.
I totally agree with Jeff. The ISDN layer is effectively unmaintained and the vast majority of the ISDN work that does actually occur is done out-of-tree.
If someone cares enough about the ISDN layer, they can make changes after Jeff's goes in to reduce the protection to a per-driver basis.
But right now, blocking this whole unmaintained pile of poo on 64-bit is the best starting point.
We're talking about effectively an 8 year old code base that hasn't been touched much at all during that time. Let's be honest about the situation. The only subsystem that is more unmaintained and gathering dust is probably the ftape layer :-)
Ar Llu, 2006-10-02 am 13:37 -0700, ysgrifennodd David Miller:
Quoted 3 lines
I totally agree with Jeff. The ISDN layer is effectively unmaintained and the vast majority of the ISDN work that does actually occur is done out-of-tree.
There are big chunks this is not true for. Also it work son x86-64 correctly, Jeff is barking up the wrong tree altogether.
Alan
Alan Cox
NAKAr Sul, 2006-10-01 am 11:21 -0400, ysgrifennodd Jeff Garzik:
Quoted 4 lines
Tons of ISDN drivers cast pointers to/from 32-bit values, which just won't work on 64-bit.
Signed-off-by Jeff Garzik <[email protected]>
NAK
I've actually been spending some time reviewing these and the warnings are for stupid things but not real 64/32 problems. I've got some diffs that clean it up just by tidying up casts etc if anyone actually still cares about the old ISDN code.
Alan
Some suggestions on doing it better
- Clean up warnings in drivers/isdn by using long not int for the values where we pass void * and cast to integer types. The code is ok (ok passing the stuff this way isn't pretty but the code is valid). In all the cases I checked out the right thing happens anyway but this removes all the warnings.
drivers/isdn/hisax/config.c +3 -3
@@ -1721,11 +1721,11 @@hisax_b_sched_event (bcs,B_RCVBUFREADY );break ;case PH_DATA |CONFIRM : - bcs->tx_cnt -= (int ) arg; + bcs->tx_cnt -= (long )arg;if (test_bit (FLG_LLI_L1WAKEUP ,&bcs->st->lli.flag)) {u_long flags;spin_lock_irqsave (&bcs->aclock, flags); - bcs->ackcnt += (int ) arg; + bcs->ackcnt += (long )arg;spin_unlock_irqrestore (&bcs->aclock, flags);schedule_event (bcs,B_ACKPENDING ); }
@@ -1789,7 +1789,7 @@switch (pr) {case PH_ACTIVATE |REQUEST : -B_L2L1 (b_if, pr, (void *) st->l1.mode); +B_L2L1 (b_if, pr, (void *)(unsigned long )st->l1.mode);break ;case PH_DATA |REQUEST :case PH_PULL |INDICATION :
drivers/isdn/hisax/hfc4s8s_l1.c +4 -3
@@ -424,7 +424,7 @@struct hfc4s8s_btype *bch = ifc->priv;struct hfc4s8s_l1 *l1 = bch->l1p;struct sk_buff *skb = (struct sk_buff *) arg; -int mode = (int ) arg; +long mode = (long ) arg;u_long flags;switch (pr) {
@@ -914,7 +914,7 @@struct sk_buff *skb;u_char f1, f2;u_char *cp; -int cnt; +long cnt;if (l1p->l1_state !=7 )return ;
@@ -980,7 +980,8 @@struct sk_buff *skb;struct hfc4s8s_l1 *l1 = bch->l1p;u_char *cp; -int cnt, max, hdlc_num, ack_len =0 ; +int cnt, max, hdlc_num; +long ack_len =0 ;if (!l1->enabled || (bch->mode ==L1_MODE_NULL ))return ;
drivers/isdn/hisax/hfc_sx.c +2 -2
@@ -970,7 +970,7 @@break ;case (HW_TESTLOOP |REQUEST ):spin_lock_irqsave (&cs->lock, flags); -switch ((int ) arg) { +switch ((long ) arg) {case (1 ):Write_hfc (cs,HFCSX_B1_SSL ,0x80 );/* tx slot */ Write_hfc (cs,HFCSX_B1_RSL ,0x80 );/* rx slot */
@@ -986,7 +986,7 @@default :spin_unlock_irqrestore (&cs->lock, flags);if (cs->debug &L1_DEB_WARN ) -debugl1 (cs,"hfcsx_l1hw loop invalid %4x" , (int ) arg); +debugl1 (cs,"hfcsx_l1hw loop invalid %4lx" , arg);return ; } cs->hw.hfcsx.trm |=0x80 ;/* enable IOM-loop */
drivers/isdn/hisax/hfc_usb.c +2 -2
@@ -696,7 +696,7 @@ fifo->delete_flg = TRUE; fifo->hif->l1l2 (fifo->hif,PH_DATA |CONFIRM , - (void *) fifo->skbuff-> + (void *) (unsigned long ) fifo->skbuff-> truesize);if (fifo->skbuff && fifo->delete_flg) {dev_kfree_skb_any (fifo->skbuff);
@@ -1144,7 +1144,7 @@set_hfcmode (hfc, (fifo->fifonum ==HFCUSB_B1_TX ) ?0 :1 , - (int ) arg); + (long ) arg); fifo->hif->l1l2 (fifo->hif,PH_ACTIVATE |INDICATION ,NULL );
drivers/isdn/hisax/hisax_fcpcipnp.c +7 -10
@@ -546,7 +546,7 @@ } bcs->tx_cnt =0 ; bcs->tx_skb =NULL ; -B_L1L2 (bcs,PH_DATA |CONFIRM , (void *) skb->truesize); +B_L1L2 (bcs,PH_DATA |CONFIRM , (void *)(unsigned long )skb->truesize);dev_kfree_skb_irq (skb); }
@@ -635,7 +635,7 @@hdlc_fill_fifo (bcs);break ;case PH_ACTIVATE |REQUEST : - mode = (int ) arg; + mode = (long ) arg;DBG (4 ,"B%d,PH_ACTIVATE_REQUEST %d" , bcs->channel +1 , mode);modehdlc (bcs, mode);B_L1L2 (bcs,PH_ACTIVATE |INDICATION ,NULL );
@@ -998,18 +998,15 @@ retval =pci_register_driver (&fcpci_driver);if (retval) - goto out; +return retval;#ifdef __ISAPNP__ retval =pnp_register_driver (&fcpnp_driver); -if (retval <0 ) - goto out_unregister_pci; +if (retval <0 ) { +pci_unregister_driver (&fcpci_driver); +return retval; + }#endif return 0 ; - - out_unregister_pci: -pci_unregister_driver (&fcpci_driver); - out: -return retval; } static void __exit hisax_fcpcipnp_exit(void)
drivers/isdn/hisax/st5481_b.c +4 -4
@@ -86,7 +86,7 @@if (!skb->len) {// Frame sent b_out->tx_skb =NULL ; -B_L1L2 (bcs,PH_DATA |CONFIRM , (void *) skb->truesize); +B_L1L2 (bcs,PH_DATA |CONFIRM , (void *)(unsigned long ) skb->truesize);dev_kfree_skb_any (skb);/* if (!(bcs->tx_skb = skb_dequeue(&bcs->sq))) { */
@@ -350,7 +350,7 @@ {struct st5481_bcs *bcs = ifc->priv;struct sk_buff *skb = arg; -int mode; +long mode;DBG (4 ,"" );
@@ -360,8 +360,8 @@ bcs->b_out.tx_skb = skb;break ;case PH_ACTIVATE |REQUEST : - mode = (int ) arg; -DBG (4 ,"B%d,PH_ACTIVATE_REQUEST %d" , bcs->channel +1 , mode); + mode = (long ) arg; +DBG (4 ,"B%d,PH_ACTIVATE_REQUEST %ld" , bcs->channel +1 , mode);st5481B_mode (bcs, mode);B_L1L2 (bcs,PH_ACTIVATE |INDICATION ,NULL );break ;
drivers/isdn/hisax/st5481_d.c +2 -2
@@ -374,7 +374,7 @@ {struct st5481_adapter *adapter = urb->context;struct st5481_d_out *d_out = &adapter->d_out; -int buf_nr; +long buf_nr;DBG (2 ,"" );
@@ -546,7 +546,7 @@static void dout_complete (struct FsmInst *fsm,int event,void *arg) {struct st5481_adapter *adapter = fsm->userdata; -int buf_nr = (int ) arg; +long buf_nr = (long ) arg;usb_d_out (adapter, buf_nr); }
Karsten Keil
Acked-byThanks.
Quoted 9 lines · Alan Cox
Some suggestions on doing it better
- Clean up warnings in
drivers/isdnby using long not int for the values where we pass void * and cast to integer types. The code is ok (ok passing the stuff this way isn't pretty but the code is valid). In all the cases I checked out the right thing happens anyway but this removes all the warnings.Signed-off-by Alan Cox <[email protected]>
Quoted 198 lines
diff -u --new-file --recursive --exclude-from
/usr/src/excludelinux.vanilla-2.6.18-mm2/drivers/isdn/hisax/config.clinux-2.6.18-mm2/drivers/isdn/hisax/config.cdrivers/isdn/hisax/config.c +3
-3@@ -1721,11 +1721,11 @@hisax_b_sched_event (bcs,B_RCVBUFREADY );break ;case PH_DATA |CONFIRM : - bcs->tx_cnt -= (int ) arg; + bcs->tx_cnt -= (long )arg;if (test_bit (FLG_LLI_L1WAKEUP ,&bcs->st->lli.flag)) {u_long flags;spin_lock_irqsave (&bcs->aclock, flags); - bcs->ackcnt += (int ) arg; + bcs->ackcnt += (long )arg;spin_unlock_irqrestore (&bcs->aclock, flags);schedule_event (bcs,B_ACKPENDING ); }@@ -1789,7 +1789,7 @@switch (pr) {case PH_ACTIVATE |REQUEST : -B_L2L1 (b_if, pr, (void *) st->l1.mode); +B_L2L1 (b_if, pr, (void *)(unsigned long )st->l1.mode);break ;case PH_DATA |REQUEST :case PH_PULL |INDICATION :diff -u --new-file --recursive --exclude-from
/usr/src/excludelinux.vanilla-2.6.18-mm2/drivers/isdn/hisax/hfc4s8s_l1.clinux-2.6.18-mm2/drivers/isdn/hisax/hfc4s8s_l1.cdrivers/isdn/hisax/hfc4s8s_l1.c +4
-3@@ -424,7 +424,7 @@struct hfc4s8s_btype *bch = ifc->priv;struct hfc4s8s_l1 *l1 = bch->l1p;struct sk_buff *skb = (struct sk_buff *) arg; -int mode = (int ) arg; +long mode = (long ) arg;u_long flags;switch (pr) {@@ -914,7 +914,7 @@struct sk_buff *skb;u_char f1, f2;u_char *cp; -int cnt; +long cnt;if (l1p->l1_state !=7 )return ;@@ -980,7 +980,8 @@struct sk_buff *skb;struct hfc4s8s_l1 *l1 = bch->l1p;u_char *cp; -int cnt, max, hdlc_num, ack_len =0 ; +int cnt, max, hdlc_num; +long ack_len =0 ;if (!l1->enabled || (bch->mode ==L1_MODE_NULL ))return ;diff -u --new-file --recursive --exclude-from
/usr/src/excludelinux.vanilla-2.6.18-mm2/drivers/isdn/hisax/hfc_sx.clinux-2.6.18-mm2/drivers/isdn/hisax/hfc_sx.cdrivers/isdn/hisax/hfc_sx.c +2
-2@@ -970,7 +970,7 @@break ;case (HW_TESTLOOP |REQUEST ):spin_lock_irqsave (&cs->lock, flags); -switch ((int ) arg) { +switch ((long ) arg) {case (1 ):Write_hfc (cs,HFCSX_B1_SSL ,0x80 );/* tx slot */ Write_hfc (cs,HFCSX_B1_RSL ,0x80 );/* rx slot */ @@ -986,7 +986,7 @@default :spin_unlock_irqrestore (&cs->lock, flags);if (cs->debug &L1_DEB_WARN ) -debugl1 (cs,"hfcsx_l1hw loop invalid %4x" , (int ) arg); +debugl1 (cs,"hfcsx_l1hw loop invalid %4lx" , arg);return ; } cs->hw.hfcsx.trm |=0x80 ;/* enable IOM-loop */ diff -u --new-file --recursive --exclude-from
/usr/src/excludelinux.vanilla-2.6.18-mm2/drivers/isdn/hisax/hfc_usb.clinux-2.6.18-mm2/drivers/isdn/hisax/hfc_usb.cdrivers/isdn/hisax/hfc_usb.c +2
-2@@ -696,7 +696,7 @@ fifo->delete_flg = TRUE; fifo->hif->l1l2 (fifo->hif,PH_DATA |CONFIRM , - (void *) fifo->skbuff-> + (void *) (unsigned long ) fifo->skbuff-> truesize);if (fifo->skbuff && fifo->delete_flg) {dev_kfree_skb_any (fifo->skbuff);@@ -1144,7 +1144,7 @@set_hfcmode (hfc, (fifo->fifonum ==HFCUSB_B1_TX ) ?0 :1 , - (int ) arg); + (long ) arg); fifo->hif->l1l2 (fifo->hif,PH_ACTIVATE |INDICATION ,NULL );diff -u --new-file --recursive --exclude-from
/usr/src/excludelinux.vanilla-2.6.18-mm2/drivers/isdn/hisax/hisax_fcpcipnp.clinux-2.6.18-mm2/drivers/isdn/hisax/hisax_fcpcipnp.cdrivers/isdn/hisax/hisax_fcpcipnp.c +7
-10@@ -546,7 +546,7 @@ } bcs->tx_cnt =0 ; bcs->tx_skb =NULL ; -B_L1L2 (bcs,PH_DATA |CONFIRM , (void *) skb->truesize); +B_L1L2 (bcs,PH_DATA |CONFIRM , (void *)(unsigned long )skb->truesize);dev_kfree_skb_irq (skb); }@@ -635,7 +635,7 @@hdlc_fill_fifo (bcs);break ;case PH_ACTIVATE |REQUEST : - mode = (int ) arg; + mode = (long ) arg;DBG (4 ,"B%d,PH_ACTIVATE_REQUEST %d" , bcs->channel +1 , mode);modehdlc (bcs, mode);B_L1L2 (bcs,PH_ACTIVATE |INDICATION ,NULL );@@ -998,18 +998,15 @@ retval =pci_register_driver (&fcpci_driver);if (retval) - goto out; +return retval;#ifdef __ISAPNP__ retval =pnp_register_driver (&fcpnp_driver); -if (retval <0 ) - goto out_unregister_pci; +if (retval <0 ) { +pci_unregister_driver (&fcpci_driver); +return retval; + }#endif return 0 ; - - out_unregister_pci: -pci_unregister_driver (&fcpci_driver); - out: -return retval; } static void __exit hisax_fcpcipnp_exit(void)diff -u --new-file --recursive --exclude-from
/usr/src/excludelinux.vanilla-2.6.18-mm2/drivers/isdn/hisax/st5481_b.clinux-2.6.18-mm2/drivers/isdn/hisax/st5481_b.cdrivers/isdn/hisax/st5481_b.c +4
-4@@ -86,7 +86,7 @@if (!skb->len) {// Frame sent b_out->tx_skb =NULL ; -B_L1L2 (bcs,PH_DATA |CONFIRM , (void *) skb->truesize); +B_L1L2 (bcs,PH_DATA |CONFIRM , (void *)(unsigned long ) skb->truesize);dev_kfree_skb_any (skb);/* if (!(bcs->tx_skb = skb_dequeue(&bcs->sq))) { */ @@ -350,7 +350,7 @@ {struct st5481_bcs *bcs = ifc->priv;struct sk_buff *skb = arg; -int mode; +long mode;DBG (4 ,"" );@@ -360,8 +360,8 @@ bcs->b_out.tx_skb = skb;break ;case PH_ACTIVATE |REQUEST : - mode = (int ) arg; -DBG (4 ,"B%d,PH_ACTIVATE_REQUEST %d" , bcs->channel +1 , mode); + mode = (long ) arg; +DBG (4 ,"B%d,PH_ACTIVATE_REQUEST %ld" , bcs->channel +1 , mode);st5481B_mode (bcs, mode);B_L1L2 (bcs,PH_ACTIVATE |INDICATION ,NULL );break ;diff -u --new-file --recursive --exclude-from
/usr/src/excludelinux.vanilla-2.6.18-mm2/drivers/isdn/hisax/st5481_d.clinux-2.6.18-mm2/drivers/isdn/hisax/st5481_d.cdrivers/isdn/hisax/st5481_d.c +2
-2@@ -374,7 +374,7 @@ {struct st5481_adapter *adapter = urb->context;struct st5481_d_out *d_out = &adapter->d_out; -int buf_nr; +long buf_nr;DBG (2 ,"" );@@ -546,7 +546,7 @@static void dout_complete (struct FsmInst *fsm,int event,void *arg) {struct st5481_adapter *adapter = fsm->userdata; -int buf_nr = (int ) arg; +long buf_nr = (long ) arg;usb_d_out (adapter, buf_nr); }
Signature · 3 lines
Karsten Keil SuSE Labs ISDN development
Karsten Keil
NAKQuoted 4 lines · Jeff Garzik
Tons of ISDN drivers cast pointers to/from 32-bit values, which just won't work on 64-bit.
NACK.
This is no problem for ISDN only some old HW drivers may not work (for most I do not have any hardware by myself).
I will compile all drivers again and if here are 64 bit issues I will disable the drivers, not ISDN.
ISDN works on 64 bits, at least with following protocols:
- transparent (audio/voice)
- X.75
- HDLC
- sync PPP
Maybe some other protocols need some 64 bit cleanup, but last time I audited the ISDN core code for 64 bit I did not saw any problems.
My main test machines are 64 bit (and SMP) and they are running ISDN servers for sync PPP and voice data processing on different ISDN HW and drivers (CAPI and Hisax) without any problem.
You will see still some warnings in the CAPI code, because the capi code has dual 64/32 bit protocol format for data packets (has 2 different pointer areas one for 64 bit one for32 bit), but this is OK.
Quoted 15 lines
Signed-off-by Jeff Garzik <[email protected]>drivers/isdn/Kconfig +1
-1@@ -6,7 +6,7 @@ menu "ISDN subsystem" config ISDN tristate "ISDN support" - depends on NET + depends on NET && 32BIT ---help--- ISDN ("Integrated Services Digital Networks", called RNIS in France) is a special type of fully digital telephone service; it's mostly
Signature · 3 lines
Karsten Keil SuSE Labs ISDN development
Quoted 2 lines · Jeff Garzik
Tons of ISDN drivers cast pointers to/from 32-bit values, which just won't work on 64-bit.
Actually AFAIK all ISDN drivers work on x86-64. However x86-64 doesn't support all of them because many depend on CONFIG_ISA.
-Andi