2.6.18 suspend regression on Intel Macs
Subsystems (2)
Well, I'm not sure it qualifies as a regression, because AFAIK no official kernels can s2ram/resume Intel Macs correctly out of the box.
There has already been some discussion about the SCI_EN ACPI control bit not being set when the Mactel boxes come out of suspend to ram.
http://marc.theaimsgroup.com/?l=linux-acpi&m=114957637501557&w=2
http://marc.theaimsgroup.com/?l=linux-kernel&m=115005083610700&w=2
http://bugme.osdl.org/show_bug.cgi?id=6670
The symptom is:
irq 9: nobody cared (try booting with the "irqpoll" option) Disabling IRQ #9
when the system comes out of sleep, making ACPI non-functional.
Two days after having released 2.6.17, Linus commited a fix for this issue in his tree (commit 5603509137940f4cbc577281cee62110d4097b1b):
@@ -812,6 +812,9 @@ static int irqrouter_resume(struct sys_d
ACPI_FUNCTION_TRACE("irqrouter_resume");
+ /* Make sure SCI is enabled again (Apple firmware bug?) */
+ acpi_set_register(ACPI_BITREG_SCI_ENABLE, 1, ACPI_MTX_DO_NOT_LOCK); +
I since then used lightly patched 2.6.17 kernels on my MacMini without a problem. With the release of 2.6.18, I decided to switch to a vanilla kernel but I realized that the above issue reappeared.
I tracked it down to the ACPI merge that took place on July 1st. More precisely the commit 967440e3be1af06ad4dc7bb18d2e3c16130fe067 (ACPI:
ACPICA 20060623) contains the following hunk:
@@ -635,6 +663,25 @@ acpi_status acpi_hw_register_write(u8 us
case ACPI_REGISTER_PM1_CONTROL: /* 16-bit access */
+ /*
+ * Perform a read first to preserve certain bits (per ACPI spec)
+ *
+ * Note: This includes SCI_EN, we never want to change this bit
+ */
+ status = acpi_hw_register_read(ACPI_MTX_DO_NOT_LOCK,
+ ACPI_REGISTER_PM1_CONTROL,
+ &read_value);
+ if (ACPI_FAILURE(status)) {
+ goto unlock_and_exit;
+ }
+
+ /* Insert the bits to be preserved */
+
+ ACPI_INSERT_BITS(value, ACPI_PM1_CONTROL_PRESERVED_BITS,
+ read_value);
+
+ /* Now we can write the data */
+
status =
acpi_hw_low_level_write(16, value,
&acpi_gbl_FADT->xpm1a_cnt_blk);
which makes Linus' fix a no-op, because it disallows setting the SCI_EN bit.
Fred.
Hi!
Quoted 2 lines
Well, I'm not sure it qualifies as a regression, because AFAIK no official kernels can s2ram/resume Intel Macs correctly out of the box.
...
Quoted 6 lines
There has already been some discussion about the
SCI_ENACPI control bit not being set when the Mactel boxes come out of suspend to ram.
http://marc.theaimsgroup.com/?l=linux-acpi&m=114957637501557&w=2
http://marc.theaimsgroup.com/?l=linux-kernel&m=115005083610700&w=2
http://bugme.osdl.org/show_bug.cgi?id=6670
Quoted 7 lines
The symptom is:
irq 9: nobody cared (try booting with the "irqpoll" option) Disabling IRQ #9
when the system comes out of sleep, making ACPI non-functional.Two days after having released 2.6.17, Linus commited a fix for this issue in his tree (commit
5603509137940f4cbc577281cee62110d4097b1b):
If fix was in 2.6.18-gitX, yes, that probably counts as a regression.
Quoted 36 lines
I since then used lightly patched 2.6.17 kernels on my MacMini without a problem. With the release of 2.6.18, I decided to switch to a vanilla kernel but I realized that the above issue reappeared.
I tracked it down to the ACPI merge that took place on July 1st. More precisely the commit
967440e3be1af06ad4dc7bb18d2e3c16130fe067(ACPI:
ACPICA 20060623) contains the following hunk:(quoted diff) +19
-0@@ -635,6 +663,25 @@ acpi_status acpi_hw_register_write(u8 us case ACPI_REGISTER_PM1_CONTROL: /* 16-bit access */ + /* + * Perform a read first to preserve certain bits (per ACPI spec) + * + * Note: This includes SCI_EN, we never want to change this bit + */ + status = acpi_hw_register_read(ACPI_MTX_DO_NOT_LOCK, + ACPI_REGISTER_PM1_CONTROL, + &read_value); + if (ACPI_FAILURE(status)) { + goto unlock_and_exit; + } + + /* Insert the bits to be preserved */ + + ACPI_INSERT_BITS(value, ACPI_PM1_CONTROL_PRESERVED_BITS, + read_value); + + /* Now we can write the data */ + status = acpi_hw_low_level_write(16, value, &acpi_gbl_FADT->xpm1a_cnt_blk);
Quoted 2 lines
which makes Linus' fix a no-op, because it disallows setting the
SCI_ENbit.
Okay, just submit a (tested) patch. (And add massive comments why it is neccessary on mac mini).
Pavel
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Quoted 17 lines · Pavel Machek
Hi!
Quoted 2 lines
Well, I'm not sure it qualifies as a regression, because AFAIK no official kernels can s2ram/resume Intel Macs correctly out of the box.
...
Quoted 11 lines
There has already been some discussion about the
SCI_ENACPI control bit not being set when the Mactel boxes come out of suspend to ram.
http://marc.theaimsgroup.com/?l=linux-acpi&m=114957637501557&w=2
http://marc.theaimsgroup.com/?l=linux-kernel&m=115005083610700&w=2
http://bugme.osdl.org/show_bug.cgi?id=6670The symptom is:
irq 9: nobody cared (try booting with the "irqpoll" option) Disabling IRQ #9
when the system comes out of sleep, making ACPI non-functional.
Quoted 4 lines
Quoted 2 lines
Two days after having released 2.6.17, Linus commited a fix for this issue in his tree (commit
5603509137940f4cbc577281cee62110d4097b1b):If fix was in 2.6.18-gitX, yes, that probably counts as a regression
"fix" for some value of the word.
The problem is that this is very much against the spec, and also quite likely breaks a bunch of machines...
If we do this we probably should at least key this of some DMI identification for the mac mini..
Hi!
Quoted 11 lines
Quoted 11 lines
Quoted 10 lines
http://marc.theaimsgroup.com/?l=linux-kernel&m=115005083610700&w=2
http://bugme.osdl.org/show_bug.cgi?id=6670The symptom is:
irq 9: nobody cared (try booting with the "irqpoll" option) Disabling IRQ #9
when the system comes out of sleep, making ACPI non-functional.Two days after having released 2.6.17, Linus commited a fix for this issue in his tree (commit
5603509137940f4cbc577281cee62110d4097b1b):
Quoted 8 lines
Quoted 1 line
If fix was in 2.6.18-gitX, yes, that probably counts as a regression
"fix" for some value of the word.
The problem is that this is very much against the spec, and also quite likely breaks a bunch of machines...If we do this we probably should at least key this of some DMI identification for the mac mini..
Do we have reports of machines breaking?
But okay, basing it on DMI works for me. (Do those crappy Apple machines have a DMI?)
Pavel
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Quoted 2 lines · Arjan van de Ven
"fix" for some value of the word.
The value would be every _meaningful_ value.
Quoted 2 lines
The problem is that this is very much against the spec, and also quite likely breaks a bunch of machines...
No, it was not shown to break a single machine, and since the SCI bit was supposed to be on, it's a no-op on any non-broken hardware.
Quoted 2 lines
If we do this we probably should at least key this of some DMI identification for the mac mini..
No. That would be silly.
Having _conditional_ code is not only bigger, it's orders of magnitude more complex and likely to break. It's much better to say: "We know at least one machine needs this" than it is to say "We know machine X needs this", because the latter has extra complexity that just doesn't buy you anything.
It's much better to treat everybody the same, if that works. That way, you don't have different code-paths.
Linus
Quoted 5 lines · Linus Torvalds
Quoted 2 lines
If we do this we probably should at least key this of some DMI identification for the mac mini..
No. That would be silly.
Quoted 8 lines
Having _conditional_ code is not only bigger, it's orders of magnitude more complex and likely to break. It's much better to say: "We know at least one machine needs this" than it is to say "We know machine X needs this", because the latter has extra complexity that just doesn't buy you anything.
It's much better to treat everybody the same, if that works. That way, you don't have different code-paths.
So what's the plan? Should/Will the ACPI guys remove the bit-preserving change brought in with the latest ACPICA merge?
Fred.
Quoted 12 lines · Frédéric Riss
Quoted 11 lines · Linus Torvalds
Quoted 2 lines
If we do this we probably should at least key this of some DMI identification for the mac mini..
No. That would be silly.
Having _conditional_ code is not only bigger, it's orders of magnitude more complex and likely to break. It's much better to say: "We know at least one machine needs this" than it is to say "We know machine X needs this", because the latter has extra complexity that just doesn't buy you anything.
Quoted 5 lines
Quoted 2 lines
It's much better to treat everybody the same, if that works. That way, you don't have different code-paths.
So what's the plan? Should/Will the ACPI guys remove the bit-preserving change brought in with the latest ACPICA merge?
it sounds like a good idea to at least put the workaround back for now, until a more elegant solution (maybe something can be done to make it not needed anymore) is found...
(or until it shows it breaks other machines at which point reconsideration is also needed)
Signature · 1 line
if you want to mail me at work (you don't), use arjan (at) linux.intel.com
Quoted 9 lines · Arjan van de Ven
Quoted 2 lines
So what's the plan? Should/Will the ACPI guys remove the bit-preserving change brought in with the latest ACPICA merge?
it sounds like a good idea to at least put the workaround back for now, until a more elegant solution (maybe something can be done to make it not needed anymore) is found...
(or until it shows it breaks other machines at which point reconsideration is also needed)
The workaround hasn't been removed. It's still there, drivers/acpi/pci_link.c:
788
789 /* Make sure SCI is enabled again (Apple firmware bug?) */ 790 acpi_set_register(ACPI_BITREG_SCI_ENABLE, 1, ACPI_MTX_DO_NOT_LOCK); 791
The thing is acpi_set_register doesn't permit anymore to write the SCI bit since the last ACPI merge. Or maybe you meant that the acpi_hw_register_write modifications should be reverted until a better solution is found?
Fred.
Hi!
Quoted 17 lines
Quoted 9 lines
Quoted 2 lines
So what's the plan? Should/Will the ACPI guys remove the bit-preserving change brought in with the latest ACPICA merge?
it sounds like a good idea to at least put the workaround back for now, until a more elegant solution (maybe something can be done to make it not needed anymore) is found...
(or until it shows it breaks other machines at which point reconsideration is also needed)The workaround hasn't been removed. It's still there,
drivers/acpi/pci_link.c:
788
789 /* Make sure SCI is enabled again (Apple firmware bug?) */ 790acpi_set_register(ACPI_BITREG_SCI_ENABLE, 1, ACPI_MTX_DO_NOT_LOCK); 791
Quoted 4 lines
The thing is
acpi_set_registerdoesn't permit anymore to write the SCI bit since the last ACPI merge. Or maybe you meant that theacpi_hw_register_writemodifications should be reverted until a better solution is found?
Maybe you can just create a patch that modifies ACPI not to mask the SCI bit? Reverting big chunk of ACPI code is likely not the right solution.
Pavel
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Quoted 4 lines · Pavel Machek
Maybe you can just create a patch that modifies ACPI not to mask the SCI bit? Reverting big chunk of ACPI code is likely not the right solution.
I'm going to apply this after I've confirmed that it fixes the Mac Mini.
It would be nice if somebody documented what the heck that "bit 9" actually is that we're trying to preserve. I wonder if that one is any better..
It's entirely possible that what we should do in acpi_hw_register_write() is to always force SCI_EN to be on, but in the meantime, this would seem to be the minimal fix that undoes the damage done by the ACPI merge.
Linus
---
drivers/acpi/hardware/hwregs.c +0 -2
@@ -665,8 +665,6 @@ acpi_status acpi_hw_register_write(u8 us/* * Perform a read first to preserve certain bits (per ACPI spec) -* -* Note: This includes SCI_EN, we never want to change this bit */ status = acpi_hw_register_read(ACPI_MTX_DO_NOT_LOCK, ACPI_REGISTER_PM1_CONTROL,
include/acpi/aclocal.h +1 -1
@@ -708,7 +708,7 @@ struct acpi_bit_register_info {* must be preserved. */ #define ACPI_PM1_STATUS_PRESERVED_BITS 0x0800/* Bit 11 */ -#define ACPI_PM1_CONTROL_PRESERVED_BITS 0x0201/* Bit 9, Bit 0 (SCI_EN) */ +#define ACPI_PM1_CONTROL_PRESERVED_BITS 0x0200/* Bit 9 (whatever) */ /* * Register IDs
Quoted 8 lines · Linus Torvalds
Quoted 4 lines · Pavel Machek
Maybe you can just create a patch that modifies ACPI not to mask the SCI bit? Reverting big chunk of ACPI code is likely not the right solution.
I'm going to apply this after I've confirmed that it fixes the Mac Mini.
I was about to send a patch doing exactly the same. It fixes the issue for me. Thanks.
Fred.
Quoted 3 lines · Frédéric Riss
I was about to send a patch doing exactly the same. It fixes the issue for me. Thanks.
Hmm. My Mac Mini doesn't restore properly even with it, but I suspect it's the old DRM "resume AGP in the wrong order" problem.
When trying to verify that, though, I noticed that if I enable the "keep console active over suspend", then it won't even suspend. It hangs after printing "i801_smbus 0000:00:1f.3: suspend".
I'm wondering what Pavel does for debugging these things, since the claim was that keeping printk() active would make debugging easier. As it is, it just seems to break suspend exactly because it wants to access devices that are turned off.
Pavel?
Linus
Quoted 8 lines · Linus Torvalds
Quoted 3 lines · Frédéric Riss
I was about to send a patch doing exactly the same. It fixes the issue for me. Thanks.
Hmm. My Mac Mini doesn't restore properly even with it, but I suspect it's the old DRM "resume AGP in the wrong order" problem.
I should have mentioned that I've tested it by patching a 2.6.18 and not the current git tree (current git wouldn't boot for me, need to investigate). Maybe something got pulled recently that introduced new issues?
Fred.
Quoted 12 lines
When trying to verify that, though, I noticed that if I enable the "keep console active over suspend", then it won't even suspend. It hangs after printing "
i801_smbus0000:00:1f.3: suspend".I'm wondering what Pavel does for debugging these things, since the claim was that keeping
printk()active would make debugging easier. As it is, it just seems to break suspend exactly because it wants to access devices that are turned off.Pavel?
Linus
suspend debugging Re: 2.6.18 suspend regression on Intel Macs
In reply to Linus TorvaldsHi!
Quoted 6 lines
I'm wondering what Pavel does for debugging these things, since the claim was that keeping
printk()active would make debugging easier. As it is, it just seems to break suspend exactly because it wants to access devices that are turned off.Pavel?
I have framebuffer console here, and just leave printk enabled during system. Last messages usually tell me where to look for problem... Plus I test suspend quite often so that regressions show up quickly.
In the early days, plain vga console on machine where bios kicks video card to work after resume did wonders, and I had to use hardware debugger on one machine, too.
Another common trick is to test s2disk, first. It tends to catch many driver problems.
Pavel
Signature · 1 line
Thanks for all the (sleeping) penguins.
Len Brown
Acked-byQuoted 8 lines · Linus Torvalds
Quoted 4 lines · Pavel Machek
Maybe you can just create a patch that modifies ACPI not to mask the SCI bit? Reverting big chunk of ACPI code is likely not the right solution.
I'm going to apply this after I've confirmed that it fixes the Mac Mini.
It is troubling that Linux now gets to add the burden of MacOS bug compatibility to Windows bug compatibility. I asked the apple folks and they
said they didn't see anyplace in MacOS where SCI_EN is restored
from the OS, so perhaps we are following a different path through their firmware...
I don't think the risk here isn't that setting SCI_EN is going to break something. The risk is that excluding it from ACPI_PM1_CONTROL_PRESERVED_BITS will allow other writes to this register to clear that bit from the OS, which is clearly counter to what the spec says to do.
But I looked through bugzilla to see if there are any systems whose SCI isn't working, and I did not find any systems where the old behaviour of not explicitly preserving SCI_EN breaks the SCI.
Quoted 3 lines
It would be nice if somebody documented what the heck that "bit 9" actually is that we're trying to preserve. I wonder if that one is any better..
All I know is that bit 9 is to be "Ignored", which the spec says to preserve along with other "Reserved" hardware register bits -- so we should keep bit 9 in the mask.
Quoted 3 lines
It's entirely possible that what we should do in
acpi_hw_register_write()is to always forceSCI_ENto be on, but in the meantime, this would seem to be the minimal fix that undoes the damage done by the ACPI merge.
Lets stick with the minimum patch until we learn more.
thanks,
-Len
Quoted 35 lines
Linus
---
drivers/acpi/hardware/hwregs.c +0
-2@@ -665,8 +665,6 @@ acpi_status acpi_hw_register_write(u8 us/* * Perform a read first to preserve certain bits (per ACPI spec) -* -* Note: This includes SCI_EN, we never want to change this bit */ status = acpi_hw_register_read(ACPI_MTX_DO_NOT_LOCK, ACPI_REGISTER_PM1_CONTROL,include/acpi/aclocal.h +1
-2@@ -708,7 +708,7 @@ struct acpi_bit_register_info {* must be preserved. */ #define ACPI_PM1_STATUS_PRESERVED_BITS 0x0800/* Bit 11 */ -#define ACPI_PM1_CONTROL_PRESERVED_BITS 0x0201/* Bit 9, Bit 0 (SCI_EN) */ +#define ACPI_PM1_CONTROL_PRESERVED_BITS 0x0200/* Bit 9 (whatever) */ /* * Register IDs -To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Quoted 6 lines · Len Brown
It is troubling that Linux now gets to add the burden of MacOS bug compatibility to Windows bug compatibility. I asked the apple folks and they
said they didn't see anyplace in MacOS whereSCI_ENis restored
from the OS, so perhaps we are following a different path through their firmware...
We definitely are. MacOS uses EFI. Linux (if you want to use a standard Linux distro image) uses Boot Camp, aka BIOS emulation.
Quoted 4 lines
I don't think the risk here isn't that setting
SCI_ENis going to break something. The risk is that excluding it fromACPI_PM1_CONTROL_PRESERVED_BITSwill allow other writes to this register to clear that bit from the OS, which is clearly counter to what the spec says to do.
Is there _ever_ any valid reason to clear it? I wouldn't object at all to a patch that just forces it..
That said, I could imagine some strange AML sequence that clears that bit in order to do something really nasty (and then sets it again at the end). There's no limit to what horrors can lurk in peoples BIOSes.
Linus
Quoted 3 lines · Arjan van de Ven
"fix" for some value of the word.
The problem is that this is very much against the spec, and also quite likely breaks a bunch of machines...
It works fine under Windows, which suggests that the Windows behaviour is to reenable the bit. I wouldn't really expect any existing hardware to expect any other sort of behaviour.
Signature · 1 line
Matthew Garrett | [email protected]
Quoted 8 lines · Matthew Garrett
Quoted 3 lines · Arjan van de Ven
"fix" for some value of the word.
The problem is that this is very much against the spec, and also quite likely breaks a bunch of machines...It works fine under Windows, which suggests that the Windows behaviour is to reenable the bit.
To me it suggests that both Windows and MacOS provoke the firmware to re-enable this bit -- it doesn't suggest that the OS is doing it.
Quoted 2 lines
I wouldn't really expect any existing hardware
to expect any other sort of behaviour.
I would. In the known universe, the Mac-mini is the only machine that seems to need us to explicitly set SCI_EN.
-Len