Correct initial and close hardware step.
Subsystems (2)
PATCH 4/5 Correct initial and close hardware step.
From: Jesse Huang <[email protected]>
Change Logs:
Correct initial and close hardware step. In some embedded system down and up IP100A will cause DMA crash. We add some for safe down and up IP100A.
Signed-off-by Jesse Huang <[email protected]>
---
drivers/net/sundance.c | 8 ++++++++ 1 files changed, 8 insertions(+), 0 deletions(-)
1bbb3f6231fa1f52a9f61e299f22610d357f6041
drivers/net/sundance.c +8 -0
@@ -789,6 +789,7 @@ static int netdev_open(struct net_device {struct netdev_private *np =netdev_priv (dev);void __iomem *ioaddr = np->base; +unsigned long flags;int i;/* Do we need to reset the chip??? */
@@ -833,6 +834,10 @@ #endifiowrite8 (0x01 , ioaddr + DebugCtrl1);netif_start_queue (dev); +spin_lock_irqsave (&np->lock, flags); +reset_tx (dev); +spin_unlock_irqrestore (&np->lock, flags); +iowrite16 (StatsEnable | RxEnable | TxEnable, ioaddr + MACCtrl1);if (netif_msg_ifup (np))
@@ -1652,6 +1657,9 @@ static int netdev_close(struct net_devic/* Disable interrupts by clearing the interrupt mask. */ iowrite16 (0x0000 , ioaddr + IntrEnable); +/* Disable Rx and Tx DMA for safely release resource */ +iowrite32 (0x500 , ioaddr + DMACtrl); +/* Stop the chip's Tx and Rx processes. */ iowrite16 (TxDisable | RxDisable | StatsDisable, ioaddr + MACCtrl1);
Signature · 1 line
1.3.GIT