Skip to contentSkip to conversation

Solve host error problem in low performance embedded system when continune down and up.

PATCH In review Jesse Huang 1 participant 2 messages Oct 14, 2006 – Oct 31, 2006

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 5/5 Solve host error problem in low performance embedded system when continune down and up.

From: Jesse Huang <[email protected]>

Change Logs:
Solve host error problem in low performance embedded system when continune down and up. It will cause IP100A DMA TargetAbort. So we need more safe process to up and down IP100A with wait hardware completely stop and software cur_tx/ dirty_tx/cur_task/last_tx be clear.

---

 drivers/net/sundance.c |   26 +++++++++++++++++++++++---
 1 files changed, 23 insertions(+), 3 deletions(-)

c06c70e20a85facd640528ca66e0b579fc3ee745

drivers/net/sundance.c +23 -3
index 14b4933..b4a6010 100755
@@ -1643,6 +1643,14 @@ static int netdev_close(struct net_devic
 	struct sk_buff *skb;
 	int i;
 
+	/* Wait and kill tasklet */
+	tasklet_kill(&np->rx_tasklet);
+	tasklet_kill(&np->tx_tasklet);
+	np->cur_tx = 0;
+	np->dirty_tx = 0;
+	np->cur_task = 0;
+	np->last_tx = 0;
+
 	netif_stop_queue(dev);
 
 	if (netif_msg_ifdown(np)) {
@@ -1663,9 +1671,20 @@ static int netdev_close(struct net_devic
 	/* Stop the chip's Tx and Rx processes. */
 	iowrite16(TxDisable | RxDisable | StatsDisable, ioaddr + MACCtrl1);
 
-	/* Wait and kill tasklet */
-	tasklet_kill(&np->rx_tasklet);
-	tasklet_kill(&np->tx_tasklet);
+    	for (i = 2000; i > 0; i--) {
+ 		if ((ioread32(ioaddr + DMACtrl) &0xC000) == 0)
+			break;
+		mdelay(1);
+    	}
+
+    	iowrite16(GlobalReset | DMAReset | FIFOReset | NetworkReset, ioaddr +ASICCtrl + 2);
+
+    	for (i = 2000; i > 0; i--)
+    	{
+ 		if ((ioread16(ioaddr + ASICCtrl +2) &ResetBusy) == 0)
+			break;
+		mdelay(1);
+    	}
 
 #ifdef __i386__
 	if (netif_msg_hw(np)) {
@@ -1703,6 +1722,7 @@ #endif /* __i386__ debugging only */
 		}
 	}
 	for (i = 0; i < TX_RING_SIZE; i++) {
+		np->tx_ring[i].next_desc = 0;
 		skb = np->tx_skbuff[i];
 		if (skb) {
 			pci_unmap_single(np->pci_dev,
Signature · 1 line
1.3.GIT
#1 lore raw

How about current IP100A status? 10/31/2006

Dear All:

How about current IP100A, sundance.c status? Should it be put into kernel or not?
Is there any sentence should I need to modify?

Thanks for your help!

Jesse Huang

----- Original Message -----
From: "Jesse Huang" <[email protected]>
To: <[email protected]>; <[email protected]>; <[email protected]>; <[email protected]>; <[email protected]>
Sent: Sunday, October 15, 2006 3:57 AM
Subject: [PATCH 5/5] Solve host error problem in low performance embeddedsystem when continune down and up.

From: Jesse Huang <[email protected]>