Skip to contentSkip to conversation

Ubuntu trivial powerpc patches

PATCH In review Ben Collins 2 participants 2 messages Oct 18, 2006 PowerPC

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Ubuntu trivial powerpc patches

Here's a couple of small patches I've got in the Ubuntu kernel tree for powerpc. They can be synced from:

git.kernel.org:/pub/scm/linux/kernel/git/bcollins/ubuntu-2.6#ubuntu-powerpc

The patch for prom init printf's disabling is just to make the boot a little cleaner.

Ben Collins:
[powerpc] Allow disabling of prom init messages. [powerpc] Make pSeries_init_panel message configurable.

 arch/powerpc/Kconfig                   |    5 +++++
 arch/powerpc/Kconfig.debug             |    9 +++++++++
 arch/powerpc/kernel/prom_init.c        |    5 ++++-
 arch/powerpc/platforms/pseries/setup.c |    2 +-
 4 files changed, 19 insertions(+), 2 deletions(-)
arch/powerpc/Kconfig +5 -0
index 8b69104..58b9ed9 100644
@@ -371,6 +371,11 @@ config PPC_PSERIES
 	select PPC_UDBG_16550
 	default y
 
+config PPC_PSERIES_PANEL_MSG
+	depends on PPC_PSERIES
+	string "Message for pSeries progress panel"
+	default "Linux ppc64"
+
 config PPC_ISERIES
 	bool "IBM Legacy iSeries"
 	depends on PPC_MULTIPLATFORM && PPC64
arch/powerpc/Kconfig.debug +9 -0
index 5ad149b..0f7a26c 100644
@@ -121,6 +121,15 @@ config BOOTX_TEXT
 	  Say Y here to see progress messages from the boot firmware in text
 	  mode. Requires either BootX or Open Firmware.
 
+config EARLY_PROM_PRINT
+	bool "Support early messages from the kernel via the prom console"
+	depends PPC_OF
+	default y
+	help
+	  Say Y here to see early messages from the kernel through the
+	  prom console. These are usually only related to the prom init
+	  and detection code.
+
 config SERIAL_TEXT_DEBUG
 	bool "Support for early boot texts over serial port"
 	depends on 4xx || LOPEC || MV64X60 || PPLUS || PRPMC800 || \
arch/powerpc/kernel/prom_init.c +4 -1
index b917616..e95cd81 100644
@@ -297,7 +297,7 @@ static void __init prom_print(const char
 	}
 }
 
-
+#ifdef CONFIG_EARLY_PROM_PRINT
 static void __init prom_print_hex(unsigned long val)
 {
 	int i, nibbles = sizeof(val)*2;
@@ -356,6 +356,9 @@ #endif
 		}
 	}
 }
+#else
+#define prom_printf(fmt, ...)	do {} while(0)
+#endif
 
 
 static unsigned int __init prom_claim(unsigned long virt, unsigned long size,
arch/powerpc/platforms/pseries/setup.c +1 -1
index 89a8119..c9fc362 100644
@@ -340,7 +340,7 @@ static void __init pSeries_setup_arch(vo
 static int __init pSeries_init_panel(void)
 {
 	/* Manually leave the kernel version on the panel. */
-	ppc_md.progress("Linux ppc64\n", 0);
+	ppc_md.progress(CONFIG_PPC_PSERIES_PANEL_MSG "\n", 0);
 	ppc_md.progress(init_utsname()->version, 0);
 
 	return 0;
#1 lore raw

arch/powerpc/Kconfig.debug config BOOTX_TEXT · line 132

Quoted 9 lines · Ben Collins
arch/powerpc/Kconfig.debug +9 -0
+config EARLY_PROM_PRINT
+	bool "Support early messages from the kernel via the prom console"
+	depends PPC_OF
+	default y
+	help
+	  Say Y here to see early messages from the kernel through the
+	  prom console. These are usually only related to the prom init
+	  and detection code.
+

The help text should probably be a little bit less cryptic :) Something like saying that those messages are displayed by the Open Firmware wrapper.

Ben.