Skip to contentSkip to conversation

slab debug and ARCH_SLAB_MINALIGN don't get along

PATCH In review Kevin Hilman 2 participants 3 messages Oct 19, 2006 – Oct 20, 2006 Memory management

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 slab debug and ARCH_SLAB_MINALIGN don't get along

When CONFIG_SLAB_DEBUG is used in combination with ARCH_SLAB_MINALIGN, some debug flags should be disabled which depend on BYTES_PER_WORD alignment.

The disabling of these debug flags is not properly handled when BYTES_PER_WORD < ARCH_SLAB_MEMALIGN < cache_line_size()

This patch fixes that and also adds an alignment check to cache_alloc_debugcheck_after() when ARCH_SLAB_MINALIGN is used.

---
 mm/slab.c |   17 +++++++++++------
 1 files changed, 11 insertions(+), 6 deletions(-)
mm/slab.c +11 -6
index 266449d..5b71267 100644
@@ -2197,18 +2197,17 @@ #endif
 	if (flags & SLAB_RED_ZONE || flags & SLAB_STORE_USER)
 		ralign = BYTES_PER_WORD;
 
-	/* 2) arch mandated alignment: disables debug if necessary */
+	/* 2) arch mandated alignment */
 	if (ralign < ARCH_SLAB_MINALIGN) {
 		ralign = ARCH_SLAB_MINALIGN;
-		if (ralign > BYTES_PER_WORD)
-			flags &= ~(SLAB_RED_ZONE | SLAB_STORE_USER);
 	}
-	/* 3) caller mandated alignment: disables debug if necessary */
+	/* 3) caller mandated alignment */
 	if (ralign < align) {
 		ralign = align;
-		if (ralign > BYTES_PER_WORD)
-			flags &= ~(SLAB_RED_ZONE | SLAB_STORE_USER);
 	}
+	/* disable deubg if necessary */
+	if (ralign > BYTES_PER_WORD)
+		flags &= ~(SLAB_RED_ZONE | SLAB_STORE_USER);
 	/*
 	 * 4) Store it.
 	 */
@@ -3063,6 +3062,12 @@ #endif
 
 		cachep->ctor(objp, cachep, ctor_flags);
 	}
+#if ARCH_SLAB_MINALIGN
+	if ((u32)objp & (ARCH_SLAB_MINALIGN-1)) {
+		printk(KERN_ERR "0x%p: not aligned to ARCH_SLAB_MINALIGN=%d\n",
+		       objp, ARCH_SLAB_MINALIGN);
+	}
+#endif
 	return objp;
 }
 #else
Signature · 1 line
1.4.2
#1 lore raw

Hi Kevin,

Quoted 9 lines · Kevin Hilman

When CONFIG_SLAB_DEBUG is used in combination with ARCH_SLAB_MINALIGN, some debug flags should be disabled which depend on BYTES_PER_WORD alignment.

The disabling of these debug flags is not properly handled when BYTES_PER_WORD < ARCH_SLAB_MEMALIGN < cache_line_size()

This patch fixes that and also adds an alignment check to cache_alloc_debugcheck_after() when ARCH_SLAB_MINALIGN is used.

You forgot to mention which case you are fixing in the patch description (that is, SLAB_HWCACHE_ALIGN, when cache_line_size() > BYTES_PER_WORD) which made the patch bit hard to decipher. Anyway, looks good, thanks!

Pekka

#2 lore raw
Quoted 8 lines · Pekka Enberg
Quoted 7 lines · Kevin Hilman

When CONFIG_SLAB_DEBUG is used in combination with ARCH_SLAB_MINALIGN, some debug flags should be disabled which depend on BYTES_PER_WORD alignment.

The disabling of these debug flags is not properly handled when BYTES_PER_WORD < ARCH_SLAB_MEMALIGN < cache_line_size()

Quoted 7 lines
Quoted 2 lines

This patch fixes that and also adds an alignment check to cache_alloc_debugcheck_after() when ARCH_SLAB_MINALIGN is used.

You forgot to mention which case you are fixing in the patch description (that is, SLAB_HWCACHE_ALIGN, when cache_line_size() > BYTES_PER_WORD) which made the patch bit hard to decipher. Anyway, looks good, thanks!

Hi Pekka,

I found this on an ARM platform where ARCH_SLAB_MINALIGN=8, and the default SLAB_HWCACHE_ALIGN is set also.

The ARM EABI requires 8-byte alignment to take full advantage of 8-byte loads/stores for ARM arch >= v5.

Kevin