Skip to contentSkip to conversation

ML410 PCI support

DISCUSSION khollan 2 participants 3 messages Jul 11, 2007 – Jul 16, 2007

lore
Share & tools
lore

khollan

author
#0 lore raw

I have two questions:
1) Has anyone wrote linux 2.6 PCI drviers for the xilinx development boards. I want to get the PCI slots working on my board.
2)How do I set the HwAddr for the TEMAC driver? Im using Grants latest git tree. My board boots and the HwAddr is set to 00:00:00:00:00:00 Thanks for your help
Kevin

Signature · 2 lines
View this message in context: http://www.nabble.com/ML410-PCI-support-tf4064052.html#a11547023
Sent from the linuxppc-embedded mailing list archive at Nabble.com.
author
#1 lore raw
Quoted 9 lines · khollan

I have two questions:
1) Has anyone wrote linux 2.6 PCI drviers for the xilinx development boards. I want to get the PCI slots working on my board. 2)How do I set the HwAddr for the TEMAC driver? Im using Grants latest git tree. My board boots and the HwAddr is set to 00:00:00:00:00:00 Thanks for your help
Kevin

1) Still waiting to see if someone knows how to go about doing this...
2) Solved this by hardcoding it in the embed_config.c file

Any help would be appreciated for the PCI issue.
Kevin

Signature · 2 lines
View this message in context: http://www.nabble.com/ML410-PCI-support-tf4064052.html#a11620099
Sent from the linuxppc-embedded mailing list archive at Nabble.com.
#2 lore raw
Quoted 13 lines · khollan
Quoted 9 lines · khollan

I have two questions:
1) Has anyone wrote linux 2.6 PCI drviers for the xilinx development boards. I want to get the PCI slots working on my board. 2)How do I set the HwAddr for the TEMAC driver? Im using Grants latest git tree. My board boots and the HwAddr is set to 00:00:00:00:00:00 Thanks for your help
Kevin

Quoted 1 line

1) Still waiting to see if someone knows how to go about doing this...

No, I don't think anyone has done proper PCI support. But you might want to double check the MontaVista 2.4 tree.

Quoted 1 line

2) Solved this by hardcoding it in the embed_config.c file

Which is probably the best way to do it if you're booting from a zImage. If you're booting from u-boot or another bootloader, you can pass the addr in the board info structure.

Cheers,
g.

Signature · 4 lines
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
[email protected]
(403) 399-0195