Skip to contentSkip to conversation

Porting uClinux to OMAP5912

DISCUSSION Sun Chao 2 participants 2 messages Nov 2, 2006 – Nov 3, 2006

lore
Share & tools
lore

Sun Chao

author
#0 lore raw

Hi every one:
I'm working on a project that will port uClinux on the
OMAP 5912 board. Because I'm now a newbie to uClinux and embedded systems, I have some questions:
1. Does the current uClinux support OMAP 5912? When I
config the linux 2.6 kernel in uClinux, I can find the choice of TI OMAP, but there are only OMAP 16** and other choices without the OMAP 5912 being included.
2. If I must do some work to make the uClinux be able to
run on the OMAP 5912 platform, what shall I do?
I will be great appreciate for your patient answer.

Signature · 1 line
Best Regards!
#1 lore raw

uClinux on OMAP 5912 - do you intend to run ucLinux on the ARM core ? or the DSP core?
The requirements change accordingly. If you want to get it up on the ARM, you'd need to disable the mmu. Getting uCLinux on the DSP would be a whole new thing. toolchain and all. :) . Much like what was done with the AD blackfin..

Quoted 12 lines · Sun Chao

Hi every one:
I'm working on a project that will port uClinux on the
OMAP 5912 board. Because I'm now a newbie to uClinux and embedded systems, I have some questions:
1. Does the current uClinux support OMAP 5912? When I
config the linux 2.6 kernel in uClinux, I can find the choice of TI OMAP, but there are only OMAP 16** and other choices without the OMAP 5912 being included.
2. If I must do some work to make the uClinux be able to
run on the OMAP 5912 platform, what shall I do?
I will be great appreciate for your patient answer.