Skip to contentSkip to conversation

Fix sparse warning in xmon Cell code

PATCH New Michael Ellerman 1 participant 3 messages Nov 3, 2006 PowerPC

lore
Share & tools
lore
#0 lore raw

PATCH 1/3 Fix sparse warning in xmon Cell code

My patch to add spu helpers to xmon (a898497088f46252e6750405504064e2dce53117) introduced a few sparse warnings, because I was dereferencing an __iomem pointer.

I think the best way to handle it is to actually use the appropriate in_beXX functions. Need to rejigger the DUMP macro a little to accomodate that.

---

Arnd, it might be nice to merge this for SDK 2.0 if that's still an option, just so that it matches upstream as much as possible.

 arch/powerpc/xmon/xmon.c |   22 +++++++++++++++-------
 1 file changed, 15 insertions(+), 7 deletions(-)
arch/powerpc/xmon/xmon.c +15 -7
Index: cell/arch/powerpc/xmon/xmon.c
===================================================================
@@ -2746,13 +2746,13 @@ static void restart_spus(void)
 }
 
 #define DUMP_WIDTH	23
-#define DUMP_FIELD(obj, format, field)					\
+#define DUMP_VALUE(format, field, value)				\
 do {									\
 	if (setjmp(bus_error_jmp) == 0) {				\
 		catch_memory_errors = 1;				\
 		sync();							\
 		printf("  %-*s = "format"\n", DUMP_WIDTH,		\
-				#field, obj->field);			\
+				#field, value);				\
 		sync();							\
 		__delay(200);						\
 	} else {							\
@@ -2763,6 +2763,9 @@ do {									\
 	catch_memory_errors = 0;					\
 } while (0)
 
+#define DUMP_FIELD(obj, format, field)	\
+	DUMP_VALUE(format, field, obj->field)
+
 static void dump_spu_fields(struct spu *spu)
 {
 	printf("Dumping spu fields at address %p:\n", spu);
@@ -2791,13 +2794,18 @@ static void dump_spu_fields(struct spu *
 	DUMP_FIELD(spu, "0x%p", timestamp);
 	DUMP_FIELD(spu, "0x%lx", problem_phys);
 	DUMP_FIELD(spu, "0x%p", problem);
-	DUMP_FIELD(spu, "0x%x", problem->spu_runcntl_RW);
-	DUMP_FIELD(spu, "0x%x", problem->spu_status_R);
-	DUMP_FIELD(spu, "0x%x", problem->spu_npc_RW);
+	DUMP_VALUE("0x%x", problem->spu_runcntl_RW,
+			in_be32(&spu->problem->spu_runcntl_RW));
+	DUMP_VALUE("0x%x", problem->spu_status_R,
+			in_be32(&spu->problem->spu_status_R));
+	DUMP_VALUE("0x%x", problem->spu_npc_RW,
+			in_be32(&spu->problem->spu_npc_RW));
 	DUMP_FIELD(spu, "0x%p", priv1);
 
-	if (spu->priv1)
-		DUMP_FIELD(spu, "0x%lx", priv1->mfc_sr1_RW);
+	if (spu->priv1) {
+		DUMP_VALUE("0x%lx", priv1->mfc_sr1_RW,
+				in_be64(&spu->priv1->mfc_sr1_RW));
+	}
 
 	DUMP_FIELD(spu, "0x%p", priv2);
 }
#1 lore raw

PATCH 2/3 Show state of spus as they're stopped in Cell xmon helper

After stopping spus in xmon I often find myself trawling through the field dumps to find out which spus were running. The spu stopping code actually knows what's running, so let's print it out to save the user some futzing.

 arch/powerpc/xmon/xmon.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
arch/powerpc/xmon/xmon.c +4 -1
Index: cell/arch/powerpc/xmon/xmon.c
===================================================================
@@ -2700,7 +2700,10 @@ static void stop_spus(void)
 			__delay(200);
 
 			spu_info[i].stopped_ok = 1;
-			printf("Stopped spu %.2d\n", i);
+
+			printf("Stopped spu %.2d (was %s)\n", i,
+					spu_info[i].saved_spu_runcntl_RW ?
+					"running" : "stopped");
 		} else {
 			catch_memory_errors = 0;
 			printf("*** Error stopping spu %.2d\n", i);
#2 lore raw

PATCH 3/3 Add a 'sd' command (spu dump) to xmon to dump spu local store

In reply to Michael Ellerman

Add a command to xmon to dump the memory of a spu's local store. This mimics the 'd' command which dumps regular memory, but does a little hand holding by taking the user supplied address and finding that offset in the local store for the specified spu.

This makes it easy for example to look at what was executing on a spu:

1:mon> ss
...
Stopped spu 04 (was running)
...
1:mon> sf 4
Dumping spu fields at address c0000000019e0a00:
...
problem->spu_npc_RW = 0x228
...
1:mon> sd 4 0x228
d000080080318228 01a00c021cffc408 4020007f217ff488 |........@ ..!...|

Aha, 01a00c02, which is of course rdch $2,$ch24 !

 arch/powerpc/xmon/xmon.c |   52 ++++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 51 insertions(+), 1 deletion(-)
arch/powerpc/xmon/xmon.c +51 -1
Index: cell/arch/powerpc/xmon/xmon.c
===================================================================
@@ -217,7 +217,8 @@ Commands:\n\
 #ifdef CONFIG_PPC_CELL
 "  ss	stop execution on all spus\n\
   sr	restore execution on stopped spus\n\
-  sf #	dump spu fields for spu # (in hex)\n"
+  sf #	dump spu fields for spu # (in hex)\n\
+  sd #	dump spu local store for spu # (in hex)\n"
 #endif
 "  S	print special registers\n\
   t	print backtrace\n\
@@ -2649,6 +2650,7 @@ struct spu_info {
 	struct spu *spu;
 	u64 saved_mfc_sr1_RW;
 	u32 saved_spu_runcntl_RW;
+	unsigned long dump_addr;
 	u8 stopped_ok;
 };
 
@@ -2668,6 +2670,8 @@ void xmon_register_spus(struct list_head
 
 		spu_info[spu->number].spu = spu;
 		spu_info[spu->number].stopped_ok = 0;
+		spu_info[spu->number].dump_addr = (unsigned long)
+				spu_info[spu->number].spu->local_store;
 	}
 }
 
@@ -2813,6 +2817,48 @@ static void dump_spu_fields(struct spu *
 	DUMP_FIELD(spu, "0x%p", priv2);
 }
 
+static void dump_spu_ls(void)
+{
+	static unsigned long num;
+	unsigned long offset, addr, ls_addr;
+	int rc;
+
+	scanhex(&num);
+	if (num >= XMON_NUM_SPUS || !spu_info[num].spu) {
+		printf("*** Error: invalid spu number\n");
+		return;
+	}
+
+	rc = scanhex(&offset);
+
+	if (setjmp(bus_error_jmp) == 0) {
+		catch_memory_errors = 1;
+		sync();
+
+		ls_addr = (unsigned long)spu_info[num].spu->local_store;
+		if (rc)
+			addr = ls_addr + offset;
+		else
+			addr = spu_info[num].dump_addr;
+
+		if (addr < ls_addr + LS_SIZE) {
+			prdump(addr, 64);
+			spu_info[num].dump_addr = addr + 64;
+		} else {
+			printf("*** Error: address outside of local store\n");
+			last_cmd = NULL;
+		}
+
+		sync();
+		__delay(200);
+	} else {
+		catch_memory_errors = 0;
+		printf("*** Error: dumping local store for spu %d\n", num);
+	}
+
+	catch_memory_errors = 0;
+}
+
 static int do_spu_cmd(void)
 {
 	unsigned long num = 0;
@@ -2832,6 +2878,10 @@ static int do_spu_cmd(void)
 		else
 			printf("*** Error: invalid spu number\n");
 		break;
+	case 'd':
+		last_cmd = "sd\n";
+		dump_spu_ls();
+		break;
 	default:
 		return -1;
 	}