Update udf documentation to reflect current state of read/write support
PATCH 1/1 Update udf documentation to reflect current state of read/write support
This patch changes Documentation/filesystems/udf.txt from saying that read/write mounts on cd media are not supported to instead state the current level of support. Specifically that it works fine on dvd+rw media and can be made to work on cd-rw media via the pktcdvd device.
--- Documentation/filesystems/udf.txt | 13 +++++++++++-- 1 files changed, 11 insertions(+), 2 deletions(-)
Documentation/filesystems/udf.txt +11 -2
@@ -7,8 +7,17 @@ If you encounter problems with reading U please report them to [email protected], which is the developer's list. -Write support requires a block driver which supports writing. The current -scsi and ide cdrom drivers do not support writing. +Write support requires a block driver which supports writing. Currently +dvd+rw drives and media support true random sector writes, and so a udf +filesystem on such devices can be directly mounted read/write. CD-RW +media however, does not support this. Instead the media can be formatted +for packet mode using the utility cdrwtool, then the pktcdvd driver can +be bound to the underlying cd device to provide the required buffering +and read-modify-write cycles to allow the filesystem random sector writes +while providing the hardware with only full packet writes. While not +required for dvd+rw media, use of the pktcdvd driver often enhances +performance due to very poor read-modify-write support supplied internally +by drive firmware. ------------------------------------------------------------------------------- The following mount options are supported:
Signature · 1 line
1.4.1