Skip to contentSkip to conversation

virtio pmem driver

PATCH Superseded Pankaj Gupta 4 participants 46 messages May 10, 2019 – May 14, 2019

Subsystems (12)
VFS KVM ACPI virtio core +8 more subsystems

v8 of 15 Superseded Latest is v15 →

lore
Share & tools
lore
#0 lore raw

v8 cover virtio pmem driver

Hi Michael & Dan,

Please review/ack the patch series from LIBNVDIMM & VIRTIO side. We have ack on ext4, xfs patches(4, 5 & 6) patch 2. Still need your ack on nvdimm patches(1 & 3) & virtio patch 2.

Changes done from v7 are only in patch(2 & 3) and not affecting existing reviews. Request to please review.
----

This patch series has implementation for "virtio pmem". "virtio pmem" is fake persistent memory(nvdimm) in guest which allows to bypass the guest page cache. This also implements a VIRTIO based asynchronous flush mechanism.

Sharing guest kernel driver in this patchset with the changes suggested in v4. Tested with Qemu side device emulation [6] for virtio-pmem. Documented the impact of possible page cache side channel attacks with suggested countermeasures.

Details of project idea for 'virtio pmem' flushing interface is shared [3] & [4].

Implementation is divided into two parts:
New virtio pmem guest driver and qemu code changes for new virtio pmem paravirtualized device.

1. Guest virtio-pmem kernel driver
---------------------------------
- Reads persistent memory range from paravirt device and registers with 'nvdimm_bus'.
- 'nvdimm/pmem' driver uses this information to allocate persistent memory region and setup filesystem operations to the allocated memory.
- virtio pmem driver implements asynchronous flushing interface to flush from guest to host.

2. Qemu virtio-pmem device
---------------------------------
- Creates virtio pmem device and exposes a memory range to KVM guest.
- At host side this is file backed memory which acts as persistent memory.
- Qemu side flush uses aio thread pool API's and virtio for asynchronous guest multi request handling.

David Hildenbrand CCed also posted a modified version[7] of qemu virtio-pmem code based on updated Qemu memory device API.

Virtio-pmem security implications and countermeasures:
-----------------------------------------------------

In previous posting of kernel driver, there was discussion [9] on possible implications of page cache side channel attacks with virtio pmem. After thorough analysis of details of known side channel attacks, below are the suggestions:

- Depends entirely on how host backing image file is mapped into guest address space.

- virtio-pmem device emulation, by default shared mapping is used to map host backing file. It is recommended to use separate backing file at host side for every guest. This will prevent any possibility of executing common code from multiple guests and any chance of inferring guest local data based based on execution time.

- If backing file is required to be shared among multiple guests it is recommended to don't support host page cache eviction commands from the guest driver. This will avoid any possibility of inferring guest local data or host data from another guest.

- Proposed device specification [8] for virtio-pmem device with details of possible security implications and suggested countermeasures for device emulation.

Virtio-pmem errors handling:
----------------------------------------
Checked behaviour of virtio-pmem for below types of errors Need suggestions on expected behaviour for handling these errors?

- Hardware Errors: Uncorrectable recoverable Errors:
a] virtio-pmem:
- As per current logic if error page belongs to Qemu process, host MCE handler isolates(hwpoison) that page and send SIGBUS. Qemu SIGBUS handler injects exception to KVM guest.
- KVM guest then isolates the page and send SIGBUS to guest userspace process which has mapped the page.

b] Existing implementation for ACPI pmem driver:
- Handles such errors with MCE notifier and creates a list of bad blocks. Read/direct access DAX operation return EIO if accessed memory page fall in bad block list.
- It also starts backgound scrubbing.
- Similar functionality can be reused in virtio-pmem with MCE notifier but without scrubbing(no ACPI/ARS)? Need inputs to confirm if this behaviour is ok or needs any change?

Changes from PATCH v7: [1]
- Corrected pending request queue logic (patch 2) - Jakub Staroń
- Used unsigned long flags for passing DAXDEV_F_SYNC (patch 3) - Dan
- Fixed typo => vma 'flag' to 'vm_flag' (patch 4)
- Added rob in patch 6 & patch 2

Changes from PATCH v6: [1]
- Corrected comment format in patch 5 & patch 6. [Dave]
- Changed variable declaration indentation in patch 6 [Darrick]
- Add Reviewed-by tag by 'Jan Kara' in patch 4 & patch 5

Changes from PATCH v5: [2]
Changes suggested in by - [Cornelia, Yuval]
- Remove assignment chaining in virtio driver
- Better error message and remove not required free
- Check nd_region before use

Changes suggested by - [Jan Kara]
- dax_synchronous() for !CONFIG_DAX
- Correct 'daxdev_mapping_supported' comment and non-dax implementation

Changes suggested by - [Dan Williams]
- Pass meaningful flag 'DAXDEV_F_SYNC' to alloc_dax
- Gate nvdimm_flush instead of additional async parameter
- Move block chaining logic to flush callback than common nvdimm_flush
- Use NULL flush callback for generic flush for better readability [Dan, Jan]

- Use virtio device id 27 from 25(already used) - [MST]

Changes from PATCH v4:
- Factor out MAP_SYNC supported functionality to a common helper [Dave, Darrick, Jan]
- Comment, indentation and virtqueue_kick failure handle - Yuval Shaia

Changes from PATCH v3:
- Use generic dax_synchronous() helper to check for DAXDEV_SYNC flag - [Dan, Darrick, Jan]
- Add 'is_nvdimm_async' function
- Document page cache side channel attacks implications & countermeasures - [Dave Chinner, Michael]

Changes from PATCH v2:
- Disable MAP_SYNC for ext4 & XFS filesystems - [Dan]
- Use name 'virtio pmem' in place of 'fake dax'

Changes from PATCH v1:
- 0-day build test for build dependency on libnvdimm

Changes suggested by - [Dan Williams]
- Split the driver into two parts virtio & pmem
- Move queuing of async block request to block layer
- Add "sync" parameter in nvdimm_flush function
- Use indirect call for nvdimm_flush
- Don’t move declarations to common global header e.g nd.h
- nvdimm_flush() return 0 or -EIO if it fails
- Teach nsio_rw_bytes() that the flush can fail
- Rename nvdimm_flush() to generic_nvdimm_flush()
- Use 'nd_region->provider_data' for long dereferencing
- Remove virtio_pmem_freeze/restore functions
- Remove BSD license text with SPDX license text

- Add might_sleep() in virtio_pmem_flush - [Luiz]
- Make spin_lock_irqsave() narrow

Pankaj Gupta (6):
libnvdimm: nd_region flush callback support
virtio-pmem: Add virtio-pmem guest driver
libnvdimm: add nd_region buffered dax_dev flag
dax: check synchronous mapping is supported
ext4: disable map_sync for virtio pmem
xfs: disable map_sync for virtio pmem

[1] https://lkml.org/lkml/2019/4/26/36
[2] https://lkml.org/lkml/2019/4/23/1092
[3] https://www.spinics.net/lists/kvm/msg149761.html
[4] https://www.spinics.net/lists/kvm/msg153095.html
[5] https://lkml.org/lkml/2018/8/31/413
[6] https://marc.info/?l=linux-kernel&m=153572228719237&w=2
[7] https://marc.info/?l=qemu-devel&m=153555721901824&w=2
[8] https://lists.oasis-open.org/archives/virtio-dev/201903/msg00083.html
[9] https://lkml.org/lkml/2019/1/9/1191

 drivers/acpi/nfit/core.c         |    4 -
 drivers/dax/bus.c                |    2 
 drivers/dax/super.c              |   13 +++
 drivers/md/dm.c                  |    3 
 drivers/nvdimm/Makefile          |    1 
 drivers/nvdimm/claim.c           |    6 +
 drivers/nvdimm/nd.h              |    1 
 drivers/nvdimm/nd_virtio.c       |  129 +++++++++++++++++++++++++++++++++++++++
 drivers/nvdimm/pmem.c            |   18 +++--
 drivers/nvdimm/region_devs.c     |   33 +++++++++
 drivers/nvdimm/virtio_pmem.c     |  117 +++++++++++++++++++++++++++++++++++
 drivers/virtio/Kconfig           |   10 +++
 fs/ext4/file.c                   |   10 +--
 fs/xfs/xfs_file.c                |    9 +-
 include/linux/dax.h              |   25 ++++++-
 include/linux/libnvdimm.h        |    9 ++
 include/linux/virtio_pmem.h      |   60 ++++++++++++++++++
 include/uapi/linux/virtio_ids.h  |    1 
 include/uapi/linux/virtio_pmem.h |   10 +++
 19 files changed, 436 insertions(+), 25 deletions(-)

_______________________________________________
Virtualization mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/virtualization

#1 lore raw

PATCH v8 1/6 libnvdimm: nd_region flush callback support

This patch adds functionality to perform flush from guest to host over VIRTIO. We are registering a callback based on 'nd_region' type. virtio_pmem driver requires this special flush function. For rest of the region types we are registering existing flush function. Report error returned by host fsync failure to userspace.

---
 drivers/acpi/nfit/core.c     |  4 ++--
 drivers/nvdimm/claim.c       |  6 ++++--
 drivers/nvdimm/nd.h          |  1 +
 drivers/nvdimm/pmem.c        | 13 ++++++++-----
 drivers/nvdimm/region_devs.c | 26 ++++++++++++++++++++++++--
 include/linux/libnvdimm.h    |  8 +++++++-
 6 files changed, 46 insertions(+), 12 deletions(-)
drivers/acpi/nfit/core.c +2 -2
index 5a389a4f4f65..08dde76cf459 100644
@@ -2434,7 +2434,7 @@ static void write_blk_ctl(struct nfit_blk *nfit_blk, unsigned int bw,
 		offset = to_interleave_offset(offset, mmio);
 
 	writeq(cmd, mmio->addr.base + offset);
-	nvdimm_flush(nfit_blk->nd_region);
+	nvdimm_flush(nfit_blk->nd_region, NULL);
 
 	if (nfit_blk->dimm_flags & NFIT_BLK_DCR_LATCH)
 		readq(mmio->addr.base + offset);
@@ -2483,7 +2483,7 @@ static int acpi_nfit_blk_single_io(struct nfit_blk *nfit_blk,
 	}
 
 	if (rw)
-		nvdimm_flush(nfit_blk->nd_region);
+		nvdimm_flush(nfit_blk->nd_region, NULL);
 
 	rc = read_blk_stat(nfit_blk, lane) ? -EIO : 0;
 	return rc;
drivers/nvdimm/claim.c +4 -2
index fb667bf469c7..13510bae1e6f 100644
@@ -263,7 +263,7 @@ static int nsio_rw_bytes(struct nd_namespace_common *ndns,
 	struct nd_namespace_io *nsio = to_nd_namespace_io(&ndns->dev);
 	unsigned int sz_align = ALIGN(size + (offset & (512 - 1)), 512);
 	sector_t sector = offset >> 9;
-	int rc = 0;
+	int rc = 0, ret = 0;
 
 	if (unlikely(!size))
 		return 0;
@@ -301,7 +301,9 @@ static int nsio_rw_bytes(struct nd_namespace_common *ndns,
 	}
 
 	memcpy_flushcache(nsio->addr + offset, buf, size);
-	nvdimm_flush(to_nd_region(ndns->dev.parent));
+	ret = nvdimm_flush(to_nd_region(ndns->dev.parent), NULL);
+	if (ret)
+		rc = ret;
 
 	return rc;
 }
drivers/nvdimm/nd.h +1 -0
index a5ac3b240293..0c74d2428bd7 100644
@@ -159,6 +159,7 @@ struct nd_region {
 	struct badblocks bb;
 	struct nd_interleave_set *nd_set;
 	struct nd_percpu_lane __percpu *lane;
+	int (*flush)(struct nd_region *nd_region, struct bio *bio);
 	struct nd_mapping mapping[0];
 };
 
drivers/nvdimm/pmem.c +8 -5
index bc2f700feef8..f719245da170 100644
@@ -192,6 +192,7 @@ static blk_status_t pmem_do_bvec(struct pmem_device *pmem, struct page *page,
 
 static blk_qc_t pmem_make_request(struct request_queue *q, struct bio *bio)
 {
+	int ret = 0;
 	blk_status_t rc = 0;
 	bool do_acct;
 	unsigned long start;
@@ -201,7 +202,7 @@ static blk_qc_t pmem_make_request(struct request_queue *q, struct bio *bio)
 	struct nd_region *nd_region = to_region(pmem);
 
 	if (bio->bi_opf & REQ_PREFLUSH)
-		nvdimm_flush(nd_region);
+		ret = nvdimm_flush(nd_region, bio);
 
 	do_acct = nd_iostat_start(bio, &start);
 	bio_for_each_segment(bvec, bio, iter) {
@@ -216,7 +217,10 @@ static blk_qc_t pmem_make_request(struct request_queue *q, struct bio *bio)
 		nd_iostat_end(bio, start);
 
 	if (bio->bi_opf & REQ_FUA)
-		nvdimm_flush(nd_region);
+		ret = nvdimm_flush(nd_region, bio);
+
+	if (ret)
+		bio->bi_status = errno_to_blk_status(ret);
 
 	bio_endio(bio);
 	return BLK_QC_T_NONE;
@@ -469,7 +473,6 @@ static int pmem_attach_disk(struct device *dev,
 	}
 	dax_write_cache(dax_dev, nvdimm_has_cache(nd_region));
 	pmem->dax_dev = dax_dev;
-
 	gendev = disk_to_dev(disk);
 	gendev->groups = pmem_attribute_groups;
 
@@ -527,14 +530,14 @@ static int nd_pmem_remove(struct device *dev)
 		sysfs_put(pmem->bb_state);
 		pmem->bb_state = NULL;
 	}
-	nvdimm_flush(to_nd_region(dev->parent));
+	nvdimm_flush(to_nd_region(dev->parent), NULL);
 
 	return 0;
 }
 
 static void nd_pmem_shutdown(struct device *dev)
 {
-	nvdimm_flush(to_nd_region(dev->parent));
+	nvdimm_flush(to_nd_region(dev->parent), NULL);
 }
 
 static void nd_pmem_notify(struct device *dev, enum nvdimm_event event)
drivers/nvdimm/region_devs.c +24 -2
index b4ef7d9ff22e..e5b59708865e 100644
@@ -295,7 +295,9 @@ static ssize_t deep_flush_store(struct device *dev, struct device_attribute *att
 		return rc;
 	if (!flush)
 		return -EINVAL;
-	nvdimm_flush(nd_region);
+	rc = nvdimm_flush(nd_region, NULL);
+	if (rc)
+		return rc;
 
 	return len;
 }
@@ -1085,6 +1087,11 @@ static struct nd_region *nd_region_create(struct nvdimm_bus *nvdimm_bus,
 	dev->of_node = ndr_desc->of_node;
 	nd_region->ndr_size = resource_size(ndr_desc->res);
 	nd_region->ndr_start = ndr_desc->res->start;
+	if (ndr_desc->flush)
+		nd_region->flush = ndr_desc->flush;
+	else
+		nd_region->flush = NULL;
+
 	nd_device_register(dev);
 
 	return nd_region;
@@ -1125,11 +1132,24 @@ struct nd_region *nvdimm_volatile_region_create(struct nvdimm_bus *nvdimm_bus,
 }
 EXPORT_SYMBOL_GPL(nvdimm_volatile_region_create);
 
+int nvdimm_flush(struct nd_region *nd_region, struct bio *bio)
+{
+	int rc = 0;
+
+	if (!nd_region->flush)
+		rc = generic_nvdimm_flush(nd_region);
+	else {
+		if (nd_region->flush(nd_region, bio))
+			rc = -EIO;
+	}
+
+	return rc;
+}
 /**
  * nvdimm_flush - flush any posted write queues between the cpu and pmem media
  * @nd_region: blk or interleaved pmem region
  */
-void nvdimm_flush(struct nd_region *nd_region)
+int generic_nvdimm_flush(struct nd_region *nd_region)
 {
 	struct nd_region_data *ndrd = dev_get_drvdata(&nd_region->dev);
 	int i, idx;
@@ -1153,6 +1173,8 @@ void nvdimm_flush(struct nd_region *nd_region)
 		if (ndrd_get_flush_wpq(ndrd, i, 0))
 			writeq(1, ndrd_get_flush_wpq(ndrd, i, idx));
 	wmb();
+
+	return 0;
 }
 EXPORT_SYMBOL_GPL(nvdimm_flush);
 
include/linux/libnvdimm.h +7 -1
index feb342d026f2..a5f369ec3726 100644
@@ -65,6 +65,9 @@ enum {
 	 */
 	ND_REGION_PERSIST_MEMCTRL = 2,
 
+	/* Platform provides asynchronous flush mechanism */
+	ND_REGION_ASYNC = 3,
+
 	/* mark newly adjusted resources as requiring a label update */
 	DPA_RESOURCE_ADJUSTED = 1 << 0,
 };
@@ -121,6 +124,7 @@ struct nd_mapping_desc {
 	int position;
 };
 
+struct nd_region;
 struct nd_region_desc {
 	struct resource *res;
 	struct nd_mapping_desc *mapping;
@@ -133,6 +137,7 @@ struct nd_region_desc {
 	int target_node;
 	unsigned long flags;
 	struct device_node *of_node;
+	int (*flush)(struct nd_region *nd_region, struct bio *bio);
 };
 
 struct device;
@@ -260,7 +265,8 @@ unsigned long nd_blk_memremap_flags(struct nd_blk_region *ndbr);
 unsigned int nd_region_acquire_lane(struct nd_region *nd_region);
 void nd_region_release_lane(struct nd_region *nd_region, unsigned int lane);
 u64 nd_fletcher64(void *addr, size_t len, bool le);
-void nvdimm_flush(struct nd_region *nd_region);
+int nvdimm_flush(struct nd_region *nd_region, struct bio *bio);
+int generic_nvdimm_flush(struct nd_region *nd_region);
 int nvdimm_has_flush(struct nd_region *nd_region);
 int nvdimm_has_cache(struct nd_region *nd_region);
 int nvdimm_in_overwrite(struct nvdimm *nvdimm);
Signature · 1 line
2.20.1
#2 lore raw

PATCH v8 1/6 libnvdimm: nd_region flush callback support

In reply to Pankaj Gupta

This patch adds functionality to perform flush from guest to host over VIRTIO. We are registering a callback based on 'nd_region' type. virtio_pmem driver requires this special flush function. For rest of the region types we are registering existing flush function. Report error returned by host fsync failure to userspace.

---
 drivers/acpi/nfit/core.c     |  4 ++--
 drivers/nvdimm/claim.c       |  6 ++++--
 drivers/nvdimm/nd.h          |  1 +
 drivers/nvdimm/pmem.c        | 13 ++++++++-----
 drivers/nvdimm/region_devs.c | 26 ++++++++++++++++++++++++--
 include/linux/libnvdimm.h    |  8 +++++++-
 6 files changed, 46 insertions(+), 12 deletions(-)
drivers/acpi/nfit/core.c +2 -2
index 5a389a4f4f65..08dde76cf459 100644
@@ -2434,7 +2434,7 @@ static void write_blk_ctl(struct nfit_blk *nfit_blk, unsigned int bw,
 		offset = to_interleave_offset(offset, mmio);
 
 	writeq(cmd, mmio->addr.base + offset);
-	nvdimm_flush(nfit_blk->nd_region);
+	nvdimm_flush(nfit_blk->nd_region, NULL);
 
 	if (nfit_blk->dimm_flags & NFIT_BLK_DCR_LATCH)
 		readq(mmio->addr.base + offset);
@@ -2483,7 +2483,7 @@ static int acpi_nfit_blk_single_io(struct nfit_blk *nfit_blk,
 	}
 
 	if (rw)
-		nvdimm_flush(nfit_blk->nd_region);
+		nvdimm_flush(nfit_blk->nd_region, NULL);
 
 	rc = read_blk_stat(nfit_blk, lane) ? -EIO : 0;
 	return rc;
drivers/nvdimm/claim.c +4 -2
index fb667bf469c7..13510bae1e6f 100644
@@ -263,7 +263,7 @@ static int nsio_rw_bytes(struct nd_namespace_common *ndns,
 	struct nd_namespace_io *nsio = to_nd_namespace_io(&ndns->dev);
 	unsigned int sz_align = ALIGN(size + (offset & (512 - 1)), 512);
 	sector_t sector = offset >> 9;
-	int rc = 0;
+	int rc = 0, ret = 0;
 
 	if (unlikely(!size))
 		return 0;
@@ -301,7 +301,9 @@ static int nsio_rw_bytes(struct nd_namespace_common *ndns,
 	}
 
 	memcpy_flushcache(nsio->addr + offset, buf, size);
-	nvdimm_flush(to_nd_region(ndns->dev.parent));
+	ret = nvdimm_flush(to_nd_region(ndns->dev.parent), NULL);
+	if (ret)
+		rc = ret;
 
 	return rc;
 }
drivers/nvdimm/nd.h +1 -0
index a5ac3b240293..0c74d2428bd7 100644
@@ -159,6 +159,7 @@ struct nd_region {
 	struct badblocks bb;
 	struct nd_interleave_set *nd_set;
 	struct nd_percpu_lane __percpu *lane;
+	int (*flush)(struct nd_region *nd_region, struct bio *bio);
 	struct nd_mapping mapping[0];
 };
 
drivers/nvdimm/pmem.c +8 -5
index bc2f700feef8..f719245da170 100644
@@ -192,6 +192,7 @@ static blk_status_t pmem_do_bvec(struct pmem_device *pmem, struct page *page,
 
 static blk_qc_t pmem_make_request(struct request_queue *q, struct bio *bio)
 {
+	int ret = 0;
 	blk_status_t rc = 0;
 	bool do_acct;
 	unsigned long start;
@@ -201,7 +202,7 @@ static blk_qc_t pmem_make_request(struct request_queue *q, struct bio *bio)
 	struct nd_region *nd_region = to_region(pmem);
 
 	if (bio->bi_opf & REQ_PREFLUSH)
-		nvdimm_flush(nd_region);
+		ret = nvdimm_flush(nd_region, bio);
 
 	do_acct = nd_iostat_start(bio, &start);
 	bio_for_each_segment(bvec, bio, iter) {
@@ -216,7 +217,10 @@ static blk_qc_t pmem_make_request(struct request_queue *q, struct bio *bio)
 		nd_iostat_end(bio, start);
 
 	if (bio->bi_opf & REQ_FUA)
-		nvdimm_flush(nd_region);
+		ret = nvdimm_flush(nd_region, bio);
+
+	if (ret)
+		bio->bi_status = errno_to_blk_status(ret);
 
 	bio_endio(bio);
 	return BLK_QC_T_NONE;
@@ -469,7 +473,6 @@ static int pmem_attach_disk(struct device *dev,
 	}
 	dax_write_cache(dax_dev, nvdimm_has_cache(nd_region));
 	pmem->dax_dev = dax_dev;
-
 	gendev = disk_to_dev(disk);
 	gendev->groups = pmem_attribute_groups;
 
@@ -527,14 +530,14 @@ static int nd_pmem_remove(struct device *dev)
 		sysfs_put(pmem->bb_state);
 		pmem->bb_state = NULL;
 	}
-	nvdimm_flush(to_nd_region(dev->parent));
+	nvdimm_flush(to_nd_region(dev->parent), NULL);
 
 	return 0;
 }
 
 static void nd_pmem_shutdown(struct device *dev)
 {
-	nvdimm_flush(to_nd_region(dev->parent));
+	nvdimm_flush(to_nd_region(dev->parent), NULL);
 }
 
 static void nd_pmem_notify(struct device *dev, enum nvdimm_event event)
drivers/nvdimm/region_devs.c +24 -2
index b4ef7d9ff22e..e5b59708865e 100644
@@ -295,7 +295,9 @@ static ssize_t deep_flush_store(struct device *dev, struct device_attribute *att
 		return rc;
 	if (!flush)
 		return -EINVAL;
-	nvdimm_flush(nd_region);
+	rc = nvdimm_flush(nd_region, NULL);
+	if (rc)
+		return rc;
 
 	return len;
 }
@@ -1085,6 +1087,11 @@ static struct nd_region *nd_region_create(struct nvdimm_bus *nvdimm_bus,
 	dev->of_node = ndr_desc->of_node;
 	nd_region->ndr_size = resource_size(ndr_desc->res);
 	nd_region->ndr_start = ndr_desc->res->start;
+	if (ndr_desc->flush)
+		nd_region->flush = ndr_desc->flush;
+	else
+		nd_region->flush = NULL;
+
 	nd_device_register(dev);
 
 	return nd_region;
@@ -1125,11 +1132,24 @@ struct nd_region *nvdimm_volatile_region_create(struct nvdimm_bus *nvdimm_bus,
 }
 EXPORT_SYMBOL_GPL(nvdimm_volatile_region_create);
 
+int nvdimm_flush(struct nd_region *nd_region, struct bio *bio)
+{
+	int rc = 0;
+
+	if (!nd_region->flush)
+		rc = generic_nvdimm_flush(nd_region);
+	else {
+		if (nd_region->flush(nd_region, bio))
+			rc = -EIO;
+	}
+
+	return rc;
+}
 /**
  * nvdimm_flush - flush any posted write queues between the cpu and pmem media
  * @nd_region: blk or interleaved pmem region
  */
-void nvdimm_flush(struct nd_region *nd_region)
+int generic_nvdimm_flush(struct nd_region *nd_region)
 {
 	struct nd_region_data *ndrd = dev_get_drvdata(&nd_region->dev);
 	int i, idx;
@@ -1153,6 +1173,8 @@ void nvdimm_flush(struct nd_region *nd_region)
 		if (ndrd_get_flush_wpq(ndrd, i, 0))
 			writeq(1, ndrd_get_flush_wpq(ndrd, i, idx));
 	wmb();
+
+	return 0;
 }
 EXPORT_SYMBOL_GPL(nvdimm_flush);
 
include/linux/libnvdimm.h +7 -1
index feb342d026f2..a5f369ec3726 100644
@@ -65,6 +65,9 @@ enum {
 	 */
 	ND_REGION_PERSIST_MEMCTRL = 2,
 
+	/* Platform provides asynchronous flush mechanism */
+	ND_REGION_ASYNC = 3,
+
 	/* mark newly adjusted resources as requiring a label update */
 	DPA_RESOURCE_ADJUSTED = 1 << 0,
 };
@@ -121,6 +124,7 @@ struct nd_mapping_desc {
 	int position;
 };
 
+struct nd_region;
 struct nd_region_desc {
 	struct resource *res;
 	struct nd_mapping_desc *mapping;
@@ -133,6 +137,7 @@ struct nd_region_desc {
 	int target_node;
 	unsigned long flags;
 	struct device_node *of_node;
+	int (*flush)(struct nd_region *nd_region, struct bio *bio);
 };
 
 struct device;
@@ -260,7 +265,8 @@ unsigned long nd_blk_memremap_flags(struct nd_blk_region *ndbr);
 unsigned int nd_region_acquire_lane(struct nd_region *nd_region);
 void nd_region_release_lane(struct nd_region *nd_region, unsigned int lane);
 u64 nd_fletcher64(void *addr, size_t len, bool le);
-void nvdimm_flush(struct nd_region *nd_region);
+int nvdimm_flush(struct nd_region *nd_region, struct bio *bio);
+int generic_nvdimm_flush(struct nd_region *nd_region);
 int nvdimm_has_flush(struct nd_region *nd_region);
 int nvdimm_has_cache(struct nd_region *nd_region);
 int nvdimm_in_overwrite(struct nvdimm *nvdimm);
Signature · 6 lines
2.20.1

_______________________________________________
Linux-nvdimm mailing list
[email protected]
https://lists.01.org/mailman/listinfo/linux-nvdimm
#3 lore raw

PATCH v8 2/6 virtio-pmem: Add virtio pmem driver

In reply to Pankaj Gupta

This patch adds virtio-pmem driver for KVM guest.

Guest reads the persistent memory range information from Qemu over VIRTIO and registers it on nvdimm_bus. It also creates a nd_region object with the persistent memory range information so that existing 'nvdimm/pmem' driver can reserve this into system memory map. This way 'virtio-pmem' driver uses existing functionality of pmem driver to register persistent memory compatible for DAX capable filesystems.

This also provides function to perform guest flush over VIRTIO from 'pmem' driver when userspace performs flush on DAX memory range.

---
 drivers/nvdimm/Makefile          |   1 +
 drivers/nvdimm/nd_virtio.c       | 129 +++++++++++++++++++++++++++++++
 drivers/nvdimm/virtio_pmem.c     | 117 ++++++++++++++++++++++++++++
 drivers/virtio/Kconfig           |  10 +++
 include/linux/virtio_pmem.h      |  60 ++++++++++++++
 include/uapi/linux/virtio_ids.h  |   1 +
 include/uapi/linux/virtio_pmem.h |  10 +++
 7 files changed, 328 insertions(+)
 create mode 100644 drivers/nvdimm/nd_virtio.c
 create mode 100644 drivers/nvdimm/virtio_pmem.c
 create mode 100644 include/linux/virtio_pmem.h
 create mode 100644 include/uapi/linux/virtio_pmem.h
drivers/nvdimm/Makefile +1 -0
index 6f2a088afad6..cefe233e0b52 100644
@@ -5,6 +5,7 @@ obj-$(CONFIG_ND_BTT) += nd_btt.o
 obj-$(CONFIG_ND_BLK) += nd_blk.o
 obj-$(CONFIG_X86_PMEM_LEGACY) += nd_e820.o
 obj-$(CONFIG_OF_PMEM) += of_pmem.o
+obj-$(CONFIG_VIRTIO_PMEM) += virtio_pmem.o nd_virtio.o
 
 nd_pmem-y := pmem.o
 
drivers/nvdimm/nd_virtio.c new file +129 -0

129 lines not on this page · raw message

drivers/nvdimm/virtio_pmem.c new file +117 -0

117 lines not on this page · raw message

drivers/virtio/Kconfig +10 -0
index 35897649c24f..9f634a2ed638 100644
@@ -42,6 +42,16 @@ config VIRTIO_PCI_LEGACY
 
 	  If unsure, say Y.
 
+config VIRTIO_PMEM
+	tristate "Support for virtio pmem driver"
+	depends on VIRTIO
+	depends on LIBNVDIMM
+	help
+	This driver provides support for virtio based flushing interface
+	for persistent memory range.
+
+	If unsure, say M.
+
 config VIRTIO_BALLOON
 	tristate "Virtio balloon driver"
 	depends on VIRTIO
include/linux/virtio_pmem.h new file +60 -0

60 lines not on this page · raw message

include/uapi/linux/virtio_ids.h +1 -0
index 6d5c3b2d4f4d..32b2f94d1f58 100644
@@ -43,5 +43,6 @@
 #define VIRTIO_ID_INPUT        18 /* virtio input */
 #define VIRTIO_ID_VSOCK        19 /* virtio vsock transport */
 #define VIRTIO_ID_CRYPTO       20 /* virtio crypto */
+#define VIRTIO_ID_PMEM         27 /* virtio pmem */
 
 #endif /* _LINUX_VIRTIO_IDS_H */
include/uapi/linux/virtio_pmem.h new file +10 -0
new file mode 100644
index 000000000000..fa3f7d52717a
@@ -0,0 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef _UAPI_LINUX_VIRTIO_PMEM_H
+#define _UAPI_LINUX_VIRTIO_PMEM_H
+
+struct virtio_pmem_config {
+	__le64 start;
+	__le64 size;
+};
+#endif
Signature · 1 line
2.20.1
#4 lore raw

PATCH v8 2/6 virtio-pmem: Add virtio pmem driver

In reply to Pankaj Gupta

This patch adds virtio-pmem driver for KVM guest.

Guest reads the persistent memory range information from Qemu over VIRTIO and registers it on nvdimm_bus. It also creates a nd_region object with the persistent memory range information so that existing 'nvdimm/pmem' driver can reserve this into system memory map. This way 'virtio-pmem' driver uses existing functionality of pmem driver to register persistent memory compatible for DAX capable filesystems.

This also provides function to perform guest flush over VIRTIO from 'pmem' driver when userspace performs flush on DAX memory range.

---
 drivers/nvdimm/Makefile          |   1 +
 drivers/nvdimm/nd_virtio.c       | 129 +++++++++++++++++++++++++++++++
 drivers/nvdimm/virtio_pmem.c     | 117 ++++++++++++++++++++++++++++
 drivers/virtio/Kconfig           |  10 +++
 include/linux/virtio_pmem.h      |  60 ++++++++++++++
 include/uapi/linux/virtio_ids.h  |   1 +
 include/uapi/linux/virtio_pmem.h |  10 +++
 7 files changed, 328 insertions(+)
 create mode 100644 drivers/nvdimm/nd_virtio.c
 create mode 100644 drivers/nvdimm/virtio_pmem.c
 create mode 100644 include/linux/virtio_pmem.h
 create mode 100644 include/uapi/linux/virtio_pmem.h
drivers/nvdimm/Makefile +1 -0
index 6f2a088afad6..cefe233e0b52 100644
@@ -5,6 +5,7 @@ obj-$(CONFIG_ND_BTT) += nd_btt.o
 obj-$(CONFIG_ND_BLK) += nd_blk.o
 obj-$(CONFIG_X86_PMEM_LEGACY) += nd_e820.o
 obj-$(CONFIG_OF_PMEM) += of_pmem.o
+obj-$(CONFIG_VIRTIO_PMEM) += virtio_pmem.o nd_virtio.o
 
 nd_pmem-y := pmem.o
 
drivers/nvdimm/nd_virtio.c new file +129 -0

129 lines not on this page · raw message

drivers/nvdimm/virtio_pmem.c new file +117 -0

117 lines not on this page · raw message

drivers/virtio/Kconfig +10 -0
index 35897649c24f..9f634a2ed638 100644
@@ -42,6 +42,16 @@ config VIRTIO_PCI_LEGACY
 
 	  If unsure, say Y.
 
+config VIRTIO_PMEM
+	tristate "Support for virtio pmem driver"
+	depends on VIRTIO
+	depends on LIBNVDIMM
+	help
+	This driver provides support for virtio based flushing interface
+	for persistent memory range.
+
+	If unsure, say M.
+
 config VIRTIO_BALLOON
 	tristate "Virtio balloon driver"
 	depends on VIRTIO
include/linux/virtio_pmem.h new file +60 -0

60 lines not on this page · raw message

include/uapi/linux/virtio_ids.h +1 -0
index 6d5c3b2d4f4d..32b2f94d1f58 100644
@@ -43,5 +43,6 @@
 #define VIRTIO_ID_INPUT        18 /* virtio input */
 #define VIRTIO_ID_VSOCK        19 /* virtio vsock transport */
 #define VIRTIO_ID_CRYPTO       20 /* virtio crypto */
+#define VIRTIO_ID_PMEM         27 /* virtio pmem */
 
 #endif /* _LINUX_VIRTIO_IDS_H */
include/uapi/linux/virtio_pmem.h new file +10 -0
new file mode 100644
index 000000000000..fa3f7d52717a
@@ -0,0 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef _UAPI_LINUX_VIRTIO_PMEM_H
+#define _UAPI_LINUX_VIRTIO_PMEM_H
+
+struct virtio_pmem_config {
+	__le64 start;
+	__le64 size;
+};
+#endif
Signature · 6 lines
2.20.1

_______________________________________________
Linux-nvdimm mailing list
[email protected]
https://lists.01.org/mailman/listinfo/linux-nvdimm
maintainer Acked-by on v8 2/6
#5 lore raw

Re: [PATCH v8 2/6] virtio-pmem: Add virtio pmem driver

Quoted 11 lines · Pankaj Gupta

This patch adds virtio-pmem driver for KVM guest.

Guest reads the persistent memory range information from Qemu over VIRTIO and registers it on nvdimm_bus. It also creates a nd_region object with the persistent memory range information so that existing 'nvdimm/pmem' driver can reserve this into system memory map. This way 'virtio-pmem' driver uses existing functionality of pmem driver to register persistent memory compatible for DAX capable filesystems.

Quoted 6 lines

This also provides function to perform guest flush over VIRTIO from 'pmem' driver when userspace performs flush on DAX memory range.

Quoted 400 lines
---
 drivers/nvdimm/Makefile          |   1 +
 drivers/nvdimm/nd_virtio.c       | 129 +++++++++++++++++++++++++++++++
 drivers/nvdimm/virtio_pmem.c     | 117 ++++++++++++++++++++++++++++
 drivers/virtio/Kconfig           |  10 +++
 include/linux/virtio_pmem.h      |  60 ++++++++++++++
 include/uapi/linux/virtio_ids.h  |   1 +
 include/uapi/linux/virtio_pmem.h |  10 +++
 7 files changed, 328 insertions(+)
 create mode 100644 drivers/nvdimm/nd_virtio.c
 create mode 100644 drivers/nvdimm/virtio_pmem.c
 create mode 100644 include/linux/virtio_pmem.h
 create mode 100644 include/uapi/linux/virtio_pmem.h
drivers/nvdimm/Makefile +1 -0
index 6f2a088afad6..cefe233e0b52 100644
@@ -5,6 +5,7 @@ obj-$(CONFIG_ND_BTT) += nd_btt.o
 obj-$(CONFIG_ND_BLK) += nd_blk.o
 obj-$(CONFIG_X86_PMEM_LEGACY) += nd_e820.o
 obj-$(CONFIG_OF_PMEM) += of_pmem.o
+obj-$(CONFIG_VIRTIO_PMEM) += virtio_pmem.o nd_virtio.o
 
 nd_pmem-y := pmem.o
 
drivers/nvdimm/nd_virtio.c new file +129 -0
new file mode 100644
index 000000000000..ed7ddcc5a62c
@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * virtio_pmem.c: Virtio pmem Driver
+ *
+ * Discovers persistent memory range information
+ * from host and provides a virtio based flushing
+ * interface.
+ */
+#include <linux/virtio_pmem.h>
+#include "nd.h"
+
+ /* The interrupt handler */
+void host_ack(struct virtqueue *vq)
+{
+	unsigned int len;
+	unsigned long flags;
+	struct virtio_pmem_request *req, *req_buf;
+	struct virtio_pmem *vpmem = vq->vdev->priv;
+
+	spin_lock_irqsave(&vpmem->pmem_lock, flags);
+	while ((req = virtqueue_get_buf(vq, &len)) != NULL) {
+		req->done = true;
+		wake_up(&req->host_acked);
+
+		if (!list_empty(&vpmem->req_list)) {
+			req_buf = list_first_entry(&vpmem->req_list,
+					struct virtio_pmem_request, list);
+			req_buf->wq_buf_avail = true;
+			wake_up(&req_buf->wq_buf);
+			list_del(&req_buf->list);
+		}
+	}
+	spin_unlock_irqrestore(&vpmem->pmem_lock, flags);
+}
+EXPORT_SYMBOL_GPL(host_ack);
+
+ /* The request submission function */
+int virtio_pmem_flush(struct nd_region *nd_region)
+{
+	int err, err1;
+	unsigned long flags;
+	struct scatterlist *sgs[2], sg, ret;
+	struct virtio_device *vdev = nd_region->provider_data;
+	struct virtio_pmem *vpmem = vdev->priv;
+	struct virtio_pmem_request *req;
+
+	might_sleep();
+	req = kmalloc(sizeof(*req), GFP_KERNEL);
+	if (!req)
+		return -ENOMEM;
+
+	req->done = false;
+	strcpy(req->name, "FLUSH");
+	init_waitqueue_head(&req->host_acked);
+	init_waitqueue_head(&req->wq_buf);
+	INIT_LIST_HEAD(&req->list);
+	sg_init_one(&sg, req->name, strlen(req->name));
+	sgs[0] = &sg;
+	sg_init_one(&ret, &req->ret, sizeof(req->ret));
+	sgs[1] = &ret;
+
+	spin_lock_irqsave(&vpmem->pmem_lock, flags);
+	 /*
+	  * If virtqueue_add_sgs returns -ENOSPC then req_vq virtual
+	  * queue does not have free descriptor. We add the request
+	  * to req_list and wait for host_ack to wake us up when free
+	  * slots are available.
+	  */
+	while ((err = virtqueue_add_sgs(vpmem->req_vq, sgs, 1, 1, req,
+					GFP_ATOMIC)) == -ENOSPC) {
+
+		dev_err(&vdev->dev, "failed to send command to virtio pmem"\
+			"device, no free slots in the virtqueue\n");
+		req->wq_buf_avail = false;
+		list_add_tail(&req->list, &vpmem->req_list);
+		spin_unlock_irqrestore(&vpmem->pmem_lock, flags);
+
+		/* When host has read buffer, this completes via host_ack */
+		wait_event(req->wq_buf, req->wq_buf_avail);
+		spin_lock_irqsave(&vpmem->pmem_lock, flags);
+	}
+	err1 = virtqueue_kick(vpmem->req_vq);
+	spin_unlock_irqrestore(&vpmem->pmem_lock, flags);
+
+	/*
+	 * virtqueue_add_sgs failed with error different than -ENOSPC, we can't
+	 * do anything about that.
+	 */
+	if (err || !err1) {
+		dev_info(&vdev->dev, "failed to send command to virtio pmem device\n");
+		err = -EIO;
+		goto ret;
+	}
+
+	/* When host has read buffer, this completes via host_ack */
+	wait_event(req->host_acked, req->done);
+	err = req->ret;
+ret:
+	kfree(req);
+	return err;
+};
+
+/* The asynchronous flush callback function */
+int async_pmem_flush(struct nd_region *nd_region, struct bio *bio)
+{
+	int rc = 0;
+
+	/* Create child bio for asynchronous flush and chain with
+	 * parent bio. Otherwise directly call nd_region flush.
+	 */
+	if (bio && bio->bi_iter.bi_sector != -1) {
+		struct bio *child = bio_alloc(GFP_ATOMIC, 0);
+
+		if (!child)
+			return -ENOMEM;
+		bio_copy_dev(child, bio);
+		child->bi_opf = REQ_PREFLUSH;
+		child->bi_iter.bi_sector = -1;
+		bio_chain(child, bio);
+		submit_bio(child);
+	} else {
+		if (virtio_pmem_flush(nd_region))
+			rc = -EIO;
+	}
+
+	return rc;
+};
+EXPORT_SYMBOL_GPL(async_pmem_flush);
+MODULE_LICENSE("GPL");
drivers/nvdimm/virtio_pmem.c new file +117 -0
new file mode 100644
index 000000000000..cfc6381c4e5d
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * virtio_pmem.c: Virtio pmem Driver
+ *
+ * Discovers persistent memory range information
+ * from host and registers the virtual pmem device
+ * with libnvdimm core.
+ */
+#include <linux/virtio_pmem.h>
+#include "nd.h"
+
+static struct virtio_device_id id_table[] = {
+	{ VIRTIO_ID_PMEM, VIRTIO_DEV_ANY_ID },
+	{ 0 },
+};
+
+ /* Initialize virt queue */
+static int init_vq(struct virtio_pmem *vpmem)
+{
+	/* single vq */
+	vpmem->req_vq = virtio_find_single_vq(vpmem->vdev,
+				host_ack, "flush_queue");
+	if (IS_ERR(vpmem->req_vq))
+		return PTR_ERR(vpmem->req_vq);
+
+	spin_lock_init(&vpmem->pmem_lock);
+	INIT_LIST_HEAD(&vpmem->req_list);
+
+	return 0;
+};
+
+static int virtio_pmem_probe(struct virtio_device *vdev)
+{
+	int err = 0;
+	struct resource res;
+	struct virtio_pmem *vpmem;
+	struct nd_region_desc ndr_desc = {};
+	int nid = dev_to_node(&vdev->dev);
+	struct nd_region *nd_region;
+
+	if (!vdev->config->get) {
+		dev_err(&vdev->dev, "%s failure: config access disabled\n",
+			__func__);
+		return -EINVAL;
+	}
+
+	vpmem = devm_kzalloc(&vdev->dev, sizeof(*vpmem), GFP_KERNEL);
+	if (!vpmem) {
+		err = -ENOMEM;
+		goto out_err;
+	}
+
+	vpmem->vdev = vdev;
+	vdev->priv = vpmem;
+	err = init_vq(vpmem);
+	if (err)
+		goto out_err;
+
+	virtio_cread(vpmem->vdev, struct virtio_pmem_config,
+			start, &vpmem->start);
+	virtio_cread(vpmem->vdev, struct virtio_pmem_config,
+			size, &vpmem->size);
+
+	res.start = vpmem->start;
+	res.end   = vpmem->start + vpmem->size-1;
+	vpmem->nd_desc.provider_name = "virtio-pmem";
+	vpmem->nd_desc.module = THIS_MODULE;
+
+	vpmem->nvdimm_bus = nvdimm_bus_register(&vdev->dev,
+						&vpmem->nd_desc);
+	if (!vpmem->nvdimm_bus)
+		goto out_vq;
+
+	dev_set_drvdata(&vdev->dev, vpmem->nvdimm_bus);
+
+	ndr_desc.res = &res;
+	ndr_desc.numa_node = nid;
+	ndr_desc.flush = async_pmem_flush;
+	set_bit(ND_REGION_PAGEMAP, &ndr_desc.flags);
+	set_bit(ND_REGION_ASYNC, &ndr_desc.flags);
+	nd_region = nvdimm_pmem_region_create(vpmem->nvdimm_bus, &ndr_desc);
+
+	if (!nd_region)
+		goto out_nd;
+	nd_region->provider_data = dev_to_virtio(nd_region->dev.parent->parent);
+	return 0;
+out_nd:
+	err = -ENXIO;
+	nvdimm_bus_unregister(vpmem->nvdimm_bus);
+out_vq:
+	vdev->config->del_vqs(vdev);
+out_err:
+	dev_err(&vdev->dev, "failed to register virtio pmem memory\n");
+	return err;
+}
+
+static void virtio_pmem_remove(struct virtio_device *vdev)
+{
+	struct nvdimm_bus *nvdimm_bus = dev_get_drvdata(&vdev->dev);
+
+	nvdimm_bus_unregister(nvdimm_bus);
+	vdev->config->del_vqs(vdev);
+	vdev->config->reset(vdev);
+}
+
+static struct virtio_driver virtio_pmem_driver = {
+	.driver.name		= KBUILD_MODNAME,
+	.driver.owner		= THIS_MODULE,
+	.id_table		= id_table,
+	.probe			= virtio_pmem_probe,
+	.remove			= virtio_pmem_remove,
+};
+
+module_virtio_driver(virtio_pmem_driver);
+MODULE_DEVICE_TABLE(virtio, id_table);
+MODULE_DESCRIPTION("Virtio pmem driver");
+MODULE_LICENSE("GPL");
drivers/virtio/Kconfig +10 -0
index 35897649c24f..9f634a2ed638 100644
@@ -42,6 +42,16 @@ config VIRTIO_PCI_LEGACY
 
 	  If unsure, say Y.
 
+config VIRTIO_PMEM
+	tristate "Support for virtio pmem driver"
+	depends on VIRTIO
+	depends on LIBNVDIMM
+	help
+	This driver provides support for virtio based flushing interface
+	for persistent memory range.
+
+	If unsure, say M.
+
 config VIRTIO_BALLOON
 	tristate "Virtio balloon driver"
 	depends on VIRTIO
include/linux/virtio_pmem.h new file +60 -0
new file mode 100644
index 000000000000..ab1da877575d
@@ -0,0 +1,60 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * virtio_pmem.h: virtio pmem Driver
+ *
+ * Discovers persistent memory range information
+ * from host and provides a virtio based flushing
+ * interface.
+ **/
+
+#ifndef _LINUX_VIRTIO_PMEM_H
+#define _LINUX_VIRTIO_PMEM_H
+
+#include <linux/virtio_ids.h>
+#include <linux/module.h>
+#include <linux/virtio_config.h>
+#include <uapi/linux/virtio_pmem.h>
+#include <linux/libnvdimm.h>
+#include <linux/spinlock.h>
+
+struct virtio_pmem_request {
+	/* Host return status corresponding to flush request */
+	int ret;
+
+	/* command name*/
+	char name[16];
+
+	/* Wait queue to process deferred work after ack from host */
+	wait_queue_head_t host_acked;
+	bool done;
+
+	/* Wait queue to process deferred work after virt queue buffer avail */
+	wait_queue_head_t wq_buf;
+	bool wq_buf_avail;
+	struct list_head list;
+};
+
+struct virtio_pmem {
+	struct virtio_device *vdev;
+
+	/* Virtio pmem request queue */
+	struct virtqueue *req_vq;
+
+	/* nvdimm bus registers virtio pmem device */
+	struct nvdimm_bus *nvdimm_bus;
+	struct nvdimm_bus_descriptor nd_desc;
+
+	/* List to store deferred work if virtqueue is full */
+	struct list_head req_list;
+
+	/* Synchronize virtqueue data */
+	spinlock_t pmem_lock;
+
+	/* Memory region information */
+	uint64_t start;
+	uint64_t size;
+};
+
+void host_ack(struct virtqueue *vq);
+int async_pmem_flush(struct nd_region *nd_region, struct bio *bio);
+#endif
include/uapi/linux/virtio_ids.h +1 -0
index 6d5c3b2d4f4d..32b2f94d1f58 100644
@@ -43,5 +43,6 @@
 #define VIRTIO_ID_INPUT        18 /* virtio input */
 #define VIRTIO_ID_VSOCK        19 /* virtio vsock transport */
 #define VIRTIO_ID_CRYPTO       20 /* virtio crypto */
+#define VIRTIO_ID_PMEM         27 /* virtio pmem */
 
 #endif /* _LINUX_VIRTIO_IDS_H */
include/uapi/linux/virtio_pmem.h new file +10 -0
new file mode 100644
index 000000000000..fa3f7d52717a
@@ -0,0 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef _UAPI_LINUX_VIRTIO_PMEM_H
+#define _UAPI_LINUX_VIRTIO_PMEM_H
+
+struct virtio_pmem_config {
+	__le64 start;
+	__le64 size;
+};
+#endif
Signature · 1 line
2.20.1
maintainer Acked-by on v8 2/6
#6 lore raw

Re: [PATCH v8 2/6] virtio-pmem: Add virtio pmem driver

In reply to Pankaj Gupta
Quoted 11 lines · Pankaj Gupta

This patch adds virtio-pmem driver for KVM guest.

Guest reads the persistent memory range information from Qemu over VIRTIO and registers it on nvdimm_bus. It also creates a nd_region object with the persistent memory range information so that existing 'nvdimm/pmem' driver can reserve this into system memory map. This way 'virtio-pmem' driver uses existing functionality of pmem driver to register persistent memory compatible for DAX capable filesystems.

Quoted 6 lines

This also provides function to perform guest flush over VIRTIO from 'pmem' driver when userspace performs flush on DAX memory range.

Quoted 400 lines
---
 drivers/nvdimm/Makefile          |   1 +
 drivers/nvdimm/nd_virtio.c       | 129 +++++++++++++++++++++++++++++++
 drivers/nvdimm/virtio_pmem.c     | 117 ++++++++++++++++++++++++++++
 drivers/virtio/Kconfig           |  10 +++
 include/linux/virtio_pmem.h      |  60 ++++++++++++++
 include/uapi/linux/virtio_ids.h  |   1 +
 include/uapi/linux/virtio_pmem.h |  10 +++
 7 files changed, 328 insertions(+)
 create mode 100644 drivers/nvdimm/nd_virtio.c
 create mode 100644 drivers/nvdimm/virtio_pmem.c
 create mode 100644 include/linux/virtio_pmem.h
 create mode 100644 include/uapi/linux/virtio_pmem.h
drivers/nvdimm/Makefile +1 -0
index 6f2a088afad6..cefe233e0b52 100644
@@ -5,6 +5,7 @@ obj-$(CONFIG_ND_BTT) += nd_btt.o
 obj-$(CONFIG_ND_BLK) += nd_blk.o
 obj-$(CONFIG_X86_PMEM_LEGACY) += nd_e820.o
 obj-$(CONFIG_OF_PMEM) += of_pmem.o
+obj-$(CONFIG_VIRTIO_PMEM) += virtio_pmem.o nd_virtio.o
 
 nd_pmem-y := pmem.o
 
drivers/nvdimm/nd_virtio.c new file +129 -0
new file mode 100644
index 000000000000..ed7ddcc5a62c
@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * virtio_pmem.c: Virtio pmem Driver
+ *
+ * Discovers persistent memory range information
+ * from host and provides a virtio based flushing
+ * interface.
+ */
+#include <linux/virtio_pmem.h>
+#include "nd.h"
+
+ /* The interrupt handler */
+void host_ack(struct virtqueue *vq)
+{
+	unsigned int len;
+	unsigned long flags;
+	struct virtio_pmem_request *req, *req_buf;
+	struct virtio_pmem *vpmem = vq->vdev->priv;
+
+	spin_lock_irqsave(&vpmem->pmem_lock, flags);
+	while ((req = virtqueue_get_buf(vq, &len)) != NULL) {
+		req->done = true;
+		wake_up(&req->host_acked);
+
+		if (!list_empty(&vpmem->req_list)) {
+			req_buf = list_first_entry(&vpmem->req_list,
+					struct virtio_pmem_request, list);
+			req_buf->wq_buf_avail = true;
+			wake_up(&req_buf->wq_buf);
+			list_del(&req_buf->list);
+		}
+	}
+	spin_unlock_irqrestore(&vpmem->pmem_lock, flags);
+}
+EXPORT_SYMBOL_GPL(host_ack);
+
+ /* The request submission function */
+int virtio_pmem_flush(struct nd_region *nd_region)
+{
+	int err, err1;
+	unsigned long flags;
+	struct scatterlist *sgs[2], sg, ret;
+	struct virtio_device *vdev = nd_region->provider_data;
+	struct virtio_pmem *vpmem = vdev->priv;
+	struct virtio_pmem_request *req;
+
+	might_sleep();
+	req = kmalloc(sizeof(*req), GFP_KERNEL);
+	if (!req)
+		return -ENOMEM;
+
+	req->done = false;
+	strcpy(req->name, "FLUSH");
+	init_waitqueue_head(&req->host_acked);
+	init_waitqueue_head(&req->wq_buf);
+	INIT_LIST_HEAD(&req->list);
+	sg_init_one(&sg, req->name, strlen(req->name));
+	sgs[0] = &sg;
+	sg_init_one(&ret, &req->ret, sizeof(req->ret));
+	sgs[1] = &ret;
+
+	spin_lock_irqsave(&vpmem->pmem_lock, flags);
+	 /*
+	  * If virtqueue_add_sgs returns -ENOSPC then req_vq virtual
+	  * queue does not have free descriptor. We add the request
+	  * to req_list and wait for host_ack to wake us up when free
+	  * slots are available.
+	  */
+	while ((err = virtqueue_add_sgs(vpmem->req_vq, sgs, 1, 1, req,
+					GFP_ATOMIC)) == -ENOSPC) {
+
+		dev_err(&vdev->dev, "failed to send command to virtio pmem"\
+			"device, no free slots in the virtqueue\n");
+		req->wq_buf_avail = false;
+		list_add_tail(&req->list, &vpmem->req_list);
+		spin_unlock_irqrestore(&vpmem->pmem_lock, flags);
+
+		/* When host has read buffer, this completes via host_ack */
+		wait_event(req->wq_buf, req->wq_buf_avail);
+		spin_lock_irqsave(&vpmem->pmem_lock, flags);
+	}
+	err1 = virtqueue_kick(vpmem->req_vq);
+	spin_unlock_irqrestore(&vpmem->pmem_lock, flags);
+
+	/*
+	 * virtqueue_add_sgs failed with error different than -ENOSPC, we can't
+	 * do anything about that.
+	 */
+	if (err || !err1) {
+		dev_info(&vdev->dev, "failed to send command to virtio pmem device\n");
+		err = -EIO;
+		goto ret;
+	}
+
+	/* When host has read buffer, this completes via host_ack */
+	wait_event(req->host_acked, req->done);
+	err = req->ret;
+ret:
+	kfree(req);
+	return err;
+};
+
+/* The asynchronous flush callback function */
+int async_pmem_flush(struct nd_region *nd_region, struct bio *bio)
+{
+	int rc = 0;
+
+	/* Create child bio for asynchronous flush and chain with
+	 * parent bio. Otherwise directly call nd_region flush.
+	 */
+	if (bio && bio->bi_iter.bi_sector != -1) {
+		struct bio *child = bio_alloc(GFP_ATOMIC, 0);
+
+		if (!child)
+			return -ENOMEM;
+		bio_copy_dev(child, bio);
+		child->bi_opf = REQ_PREFLUSH;
+		child->bi_iter.bi_sector = -1;
+		bio_chain(child, bio);
+		submit_bio(child);
+	} else {
+		if (virtio_pmem_flush(nd_region))
+			rc = -EIO;
+	}
+
+	return rc;
+};
+EXPORT_SYMBOL_GPL(async_pmem_flush);
+MODULE_LICENSE("GPL");
drivers/nvdimm/virtio_pmem.c new file +117 -0
new file mode 100644
index 000000000000..cfc6381c4e5d
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * virtio_pmem.c: Virtio pmem Driver
+ *
+ * Discovers persistent memory range information
+ * from host and registers the virtual pmem device
+ * with libnvdimm core.
+ */
+#include <linux/virtio_pmem.h>
+#include "nd.h"
+
+static struct virtio_device_id id_table[] = {
+	{ VIRTIO_ID_PMEM, VIRTIO_DEV_ANY_ID },
+	{ 0 },
+};
+
+ /* Initialize virt queue */
+static int init_vq(struct virtio_pmem *vpmem)
+{
+	/* single vq */
+	vpmem->req_vq = virtio_find_single_vq(vpmem->vdev,
+				host_ack, "flush_queue");
+	if (IS_ERR(vpmem->req_vq))
+		return PTR_ERR(vpmem->req_vq);
+
+	spin_lock_init(&vpmem->pmem_lock);
+	INIT_LIST_HEAD(&vpmem->req_list);
+
+	return 0;
+};
+
+static int virtio_pmem_probe(struct virtio_device *vdev)
+{
+	int err = 0;
+	struct resource res;
+	struct virtio_pmem *vpmem;
+	struct nd_region_desc ndr_desc = {};
+	int nid = dev_to_node(&vdev->dev);
+	struct nd_region *nd_region;
+
+	if (!vdev->config->get) {
+		dev_err(&vdev->dev, "%s failure: config access disabled\n",
+			__func__);
+		return -EINVAL;
+	}
+
+	vpmem = devm_kzalloc(&vdev->dev, sizeof(*vpmem), GFP_KERNEL);
+	if (!vpmem) {
+		err = -ENOMEM;
+		goto out_err;
+	}
+
+	vpmem->vdev = vdev;
+	vdev->priv = vpmem;
+	err = init_vq(vpmem);
+	if (err)
+		goto out_err;
+
+	virtio_cread(vpmem->vdev, struct virtio_pmem_config,
+			start, &vpmem->start);
+	virtio_cread(vpmem->vdev, struct virtio_pmem_config,
+			size, &vpmem->size);
+
+	res.start = vpmem->start;
+	res.end   = vpmem->start + vpmem->size-1;
+	vpmem->nd_desc.provider_name = "virtio-pmem";
+	vpmem->nd_desc.module = THIS_MODULE;
+
+	vpmem->nvdimm_bus = nvdimm_bus_register(&vdev->dev,
+						&vpmem->nd_desc);
+	if (!vpmem->nvdimm_bus)
+		goto out_vq;
+
+	dev_set_drvdata(&vdev->dev, vpmem->nvdimm_bus);
+
+	ndr_desc.res = &res;
+	ndr_desc.numa_node = nid;
+	ndr_desc.flush = async_pmem_flush;
+	set_bit(ND_REGION_PAGEMAP, &ndr_desc.flags);
+	set_bit(ND_REGION_ASYNC, &ndr_desc.flags);
+	nd_region = nvdimm_pmem_region_create(vpmem->nvdimm_bus, &ndr_desc);
+
+	if (!nd_region)
+		goto out_nd;
+	nd_region->provider_data = dev_to_virtio(nd_region->dev.parent->parent);
+	return 0;
+out_nd:
+	err = -ENXIO;
+	nvdimm_bus_unregister(vpmem->nvdimm_bus);
+out_vq:
+	vdev->config->del_vqs(vdev);
+out_err:
+	dev_err(&vdev->dev, "failed to register virtio pmem memory\n");
+	return err;
+}
+
+static void virtio_pmem_remove(struct virtio_device *vdev)
+{
+	struct nvdimm_bus *nvdimm_bus = dev_get_drvdata(&vdev->dev);
+
+	nvdimm_bus_unregister(nvdimm_bus);
+	vdev->config->del_vqs(vdev);
+	vdev->config->reset(vdev);
+}
+
+static struct virtio_driver virtio_pmem_driver = {
+	.driver.name		= KBUILD_MODNAME,
+	.driver.owner		= THIS_MODULE,
+	.id_table		= id_table,
+	.probe			= virtio_pmem_probe,
+	.remove			= virtio_pmem_remove,
+};
+
+module_virtio_driver(virtio_pmem_driver);
+MODULE_DEVICE_TABLE(virtio, id_table);
+MODULE_DESCRIPTION("Virtio pmem driver");
+MODULE_LICENSE("GPL");
drivers/virtio/Kconfig +10 -0
index 35897649c24f..9f634a2ed638 100644
@@ -42,6 +42,16 @@ config VIRTIO_PCI_LEGACY
 
 	  If unsure, say Y.
 
+config VIRTIO_PMEM
+	tristate "Support for virtio pmem driver"
+	depends on VIRTIO
+	depends on LIBNVDIMM
+	help
+	This driver provides support for virtio based flushing interface
+	for persistent memory range.
+
+	If unsure, say M.
+
 config VIRTIO_BALLOON
 	tristate "Virtio balloon driver"
 	depends on VIRTIO
include/linux/virtio_pmem.h new file +60 -0
new file mode 100644
index 000000000000..ab1da877575d
@@ -0,0 +1,60 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * virtio_pmem.h: virtio pmem Driver
+ *
+ * Discovers persistent memory range information
+ * from host and provides a virtio based flushing
+ * interface.
+ **/
+
+#ifndef _LINUX_VIRTIO_PMEM_H
+#define _LINUX_VIRTIO_PMEM_H
+
+#include <linux/virtio_ids.h>
+#include <linux/module.h>
+#include <linux/virtio_config.h>
+#include <uapi/linux/virtio_pmem.h>
+#include <linux/libnvdimm.h>
+#include <linux/spinlock.h>
+
+struct virtio_pmem_request {
+	/* Host return status corresponding to flush request */
+	int ret;
+
+	/* command name*/
+	char name[16];
+
+	/* Wait queue to process deferred work after ack from host */
+	wait_queue_head_t host_acked;
+	bool done;
+
+	/* Wait queue to process deferred work after virt queue buffer avail */
+	wait_queue_head_t wq_buf;
+	bool wq_buf_avail;
+	struct list_head list;
+};
+
+struct virtio_pmem {
+	struct virtio_device *vdev;
+
+	/* Virtio pmem request queue */
+	struct virtqueue *req_vq;
+
+	/* nvdimm bus registers virtio pmem device */
+	struct nvdimm_bus *nvdimm_bus;
+	struct nvdimm_bus_descriptor nd_desc;
+
+	/* List to store deferred work if virtqueue is full */
+	struct list_head req_list;
+
+	/* Synchronize virtqueue data */
+	spinlock_t pmem_lock;
+
+	/* Memory region information */
+	uint64_t start;
+	uint64_t size;
+};
+
+void host_ack(struct virtqueue *vq);
+int async_pmem_flush(struct nd_region *nd_region, struct bio *bio);
+#endif
include/uapi/linux/virtio_ids.h +1 -0
index 6d5c3b2d4f4d..32b2f94d1f58 100644
@@ -43,5 +43,6 @@
 #define VIRTIO_ID_INPUT        18 /* virtio input */
 #define VIRTIO_ID_VSOCK        19 /* virtio vsock transport */
 #define VIRTIO_ID_CRYPTO       20 /* virtio crypto */
+#define VIRTIO_ID_PMEM         27 /* virtio pmem */
 
 #endif /* _LINUX_VIRTIO_IDS_H */
include/uapi/linux/virtio_pmem.h new file +10 -0
new file mode 100644
index 000000000000..fa3f7d52717a
@@ -0,0 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef _UAPI_LINUX_VIRTIO_PMEM_H
+#define _UAPI_LINUX_VIRTIO_PMEM_H
+
+struct virtio_pmem_config {
+	__le64 start;
+	__le64 size;
+};
+#endif
Signature · 1 line
2.20.1

_______________________________________________
Linux-nvdimm mailing list
[email protected]
https://lists.01.org/mailman/listinfo/linux-nvdimm

#7 lore raw

Re: [Qemu-devel] [PATCH v8 2/6] virtio-pmem: Add virtio pmem driver

Quoted 10 lines
Quoted 10 lines

Guest reads the persistent memory range information from Qemu over VIRTIO and registers it on nvdimm_bus. It also creates a nd_region object with the persistent memory range information so that existing 'nvdimm/pmem' driver can reserve this into system memory map. This way 'virtio-pmem' driver uses existing functionality of pmem driver to register persistent memory compatible for DAX capable filesystems.

Quoted 8 lines
Quoted 6 lines

This also provides function to perform guest flush over VIRTIO from 'pmem' driver when userspace performs flush on DAX memory range.

Thank you, Michael.

Best regards,
Pankaj

Quoted 405 lines
Quoted 403 lines
---
 drivers/nvdimm/Makefile          |   1 +
 drivers/nvdimm/nd_virtio.c       | 129 +++++++++++++++++++++++++++++++
 drivers/nvdimm/virtio_pmem.c     | 117 ++++++++++++++++++++++++++++
 drivers/virtio/Kconfig           |  10 +++
 include/linux/virtio_pmem.h      |  60 ++++++++++++++
 include/uapi/linux/virtio_ids.h  |   1 +
 include/uapi/linux/virtio_pmem.h |  10 +++
 7 files changed, 328 insertions(+)
 create mode 100644 drivers/nvdimm/nd_virtio.c
 create mode 100644 drivers/nvdimm/virtio_pmem.c
 create mode 100644 include/linux/virtio_pmem.h
 create mode 100644 include/uapi/linux/virtio_pmem.h
drivers/nvdimm/Makefile +1 -0
index 6f2a088afad6..cefe233e0b52 100644
@@ -5,6 +5,7 @@ obj-$(CONFIG_ND_BTT) += nd_btt.o
 obj-$(CONFIG_ND_BLK) += nd_blk.o
 obj-$(CONFIG_X86_PMEM_LEGACY) += nd_e820.o
 obj-$(CONFIG_OF_PMEM) += of_pmem.o
+obj-$(CONFIG_VIRTIO_PMEM) += virtio_pmem.o nd_virtio.o
 
 nd_pmem-y := pmem.o
 
drivers/nvdimm/nd_virtio.c new file +129 -0
new file mode 100644
index 000000000000..ed7ddcc5a62c
@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * virtio_pmem.c: Virtio pmem Driver
+ *
+ * Discovers persistent memory range information
+ * from host and provides a virtio based flushing
+ * interface.
+ */
+#include <linux/virtio_pmem.h>
+#include "nd.h"
+
+ /* The interrupt handler */
+void host_ack(struct virtqueue *vq)
+{
+	unsigned int len;
+	unsigned long flags;
+	struct virtio_pmem_request *req, *req_buf;
+	struct virtio_pmem *vpmem = vq->vdev->priv;
+
+	spin_lock_irqsave(&vpmem->pmem_lock, flags);
+	while ((req = virtqueue_get_buf(vq, &len)) != NULL) {
+		req->done = true;
+		wake_up(&req->host_acked);
+
+		if (!list_empty(&vpmem->req_list)) {
+			req_buf = list_first_entry(&vpmem->req_list,
+					struct virtio_pmem_request, list);
+			req_buf->wq_buf_avail = true;
+			wake_up(&req_buf->wq_buf);
+			list_del(&req_buf->list);
+		}
+	}
+	spin_unlock_irqrestore(&vpmem->pmem_lock, flags);
+}
+EXPORT_SYMBOL_GPL(host_ack);
+
+ /* The request submission function */
+int virtio_pmem_flush(struct nd_region *nd_region)
+{
+	int err, err1;
+	unsigned long flags;
+	struct scatterlist *sgs[2], sg, ret;
+	struct virtio_device *vdev = nd_region->provider_data;
+	struct virtio_pmem *vpmem = vdev->priv;
+	struct virtio_pmem_request *req;
+
+	might_sleep();
+	req = kmalloc(sizeof(*req), GFP_KERNEL);
+	if (!req)
+		return -ENOMEM;
+
+	req->done = false;
+	strcpy(req->name, "FLUSH");
+	init_waitqueue_head(&req->host_acked);
+	init_waitqueue_head(&req->wq_buf);
+	INIT_LIST_HEAD(&req->list);
+	sg_init_one(&sg, req->name, strlen(req->name));
+	sgs[0] = &sg;
+	sg_init_one(&ret, &req->ret, sizeof(req->ret));
+	sgs[1] = &ret;
+
+	spin_lock_irqsave(&vpmem->pmem_lock, flags);
+	 /*
+	  * If virtqueue_add_sgs returns -ENOSPC then req_vq virtual
+	  * queue does not have free descriptor. We add the request
+	  * to req_list and wait for host_ack to wake us up when free
+	  * slots are available.
+	  */
+	while ((err = virtqueue_add_sgs(vpmem->req_vq, sgs, 1, 1, req,
+					GFP_ATOMIC)) == -ENOSPC) {
+
+		dev_err(&vdev->dev, "failed to send command to virtio pmem"\
+			"device, no free slots in the virtqueue\n");
+		req->wq_buf_avail = false;
+		list_add_tail(&req->list, &vpmem->req_list);
+		spin_unlock_irqrestore(&vpmem->pmem_lock, flags);
+
+		/* When host has read buffer, this completes via host_ack */
+		wait_event(req->wq_buf, req->wq_buf_avail);
+		spin_lock_irqsave(&vpmem->pmem_lock, flags);
+	}
+	err1 = virtqueue_kick(vpmem->req_vq);
+	spin_unlock_irqrestore(&vpmem->pmem_lock, flags);
+
+	/*
+	 * virtqueue_add_sgs failed with error different than -ENOSPC, we can't
+	 * do anything about that.
+	 */
+	if (err || !err1) {
+		dev_info(&vdev->dev, "failed to send command to virtio pmem device\n");
+		err = -EIO;
+		goto ret;
+	}
+
+	/* When host has read buffer, this completes via host_ack */
+	wait_event(req->host_acked, req->done);
+	err = req->ret;
+ret:
+	kfree(req);
+	return err;
+};
+
+/* The asynchronous flush callback function */
+int async_pmem_flush(struct nd_region *nd_region, struct bio *bio)
+{
+	int rc = 0;
+
+	/* Create child bio for asynchronous flush and chain with
+	 * parent bio. Otherwise directly call nd_region flush.
+	 */
+	if (bio && bio->bi_iter.bi_sector != -1) {
+		struct bio *child = bio_alloc(GFP_ATOMIC, 0);
+
+		if (!child)
+			return -ENOMEM;
+		bio_copy_dev(child, bio);
+		child->bi_opf = REQ_PREFLUSH;
+		child->bi_iter.bi_sector = -1;
+		bio_chain(child, bio);
+		submit_bio(child);
+	} else {
+		if (virtio_pmem_flush(nd_region))
+			rc = -EIO;
+	}
+
+	return rc;
+};
+EXPORT_SYMBOL_GPL(async_pmem_flush);
+MODULE_LICENSE("GPL");
drivers/nvdimm/virtio_pmem.c new file +117 -0
new file mode 100644
index 000000000000..cfc6381c4e5d
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * virtio_pmem.c: Virtio pmem Driver
+ *
+ * Discovers persistent memory range information
+ * from host and registers the virtual pmem device
+ * with libnvdimm core.
+ */
+#include <linux/virtio_pmem.h>
+#include "nd.h"
+
+static struct virtio_device_id id_table[] = {
+	{ VIRTIO_ID_PMEM, VIRTIO_DEV_ANY_ID },
+	{ 0 },
+};
+
+ /* Initialize virt queue */
+static int init_vq(struct virtio_pmem *vpmem)
+{
+	/* single vq */
+	vpmem->req_vq = virtio_find_single_vq(vpmem->vdev,
+				host_ack, "flush_queue");
+	if (IS_ERR(vpmem->req_vq))
+		return PTR_ERR(vpmem->req_vq);
+
+	spin_lock_init(&vpmem->pmem_lock);
+	INIT_LIST_HEAD(&vpmem->req_list);
+
+	return 0;
+};
+
+static int virtio_pmem_probe(struct virtio_device *vdev)
+{
+	int err = 0;
+	struct resource res;
+	struct virtio_pmem *vpmem;
+	struct nd_region_desc ndr_desc = {};
+	int nid = dev_to_node(&vdev->dev);
+	struct nd_region *nd_region;
+
+	if (!vdev->config->get) {
+		dev_err(&vdev->dev, "%s failure: config access disabled\n",
+			__func__);
+		return -EINVAL;
+	}
+
+	vpmem = devm_kzalloc(&vdev->dev, sizeof(*vpmem), GFP_KERNEL);
+	if (!vpmem) {
+		err = -ENOMEM;
+		goto out_err;
+	}
+
+	vpmem->vdev = vdev;
+	vdev->priv = vpmem;
+	err = init_vq(vpmem);
+	if (err)
+		goto out_err;
+
+	virtio_cread(vpmem->vdev, struct virtio_pmem_config,
+			start, &vpmem->start);
+	virtio_cread(vpmem->vdev, struct virtio_pmem_config,
+			size, &vpmem->size);
+
+	res.start = vpmem->start;
+	res.end   = vpmem->start + vpmem->size-1;
+	vpmem->nd_desc.provider_name = "virtio-pmem";
+	vpmem->nd_desc.module = THIS_MODULE;
+
+	vpmem->nvdimm_bus = nvdimm_bus_register(&vdev->dev,
+						&vpmem->nd_desc);
+	if (!vpmem->nvdimm_bus)
+		goto out_vq;
+
+	dev_set_drvdata(&vdev->dev, vpmem->nvdimm_bus);
+
+	ndr_desc.res = &res;
+	ndr_desc.numa_node = nid;
+	ndr_desc.flush = async_pmem_flush;
+	set_bit(ND_REGION_PAGEMAP, &ndr_desc.flags);
+	set_bit(ND_REGION_ASYNC, &ndr_desc.flags);
+	nd_region = nvdimm_pmem_region_create(vpmem->nvdimm_bus, &ndr_desc);
+
+	if (!nd_region)
+		goto out_nd;
+	nd_region->provider_data = dev_to_virtio(nd_region->dev.parent->parent);
+	return 0;
+out_nd:
+	err = -ENXIO;
+	nvdimm_bus_unregister(vpmem->nvdimm_bus);
+out_vq:
+	vdev->config->del_vqs(vdev);
+out_err:
+	dev_err(&vdev->dev, "failed to register virtio pmem memory\n");
+	return err;
+}
+
+static void virtio_pmem_remove(struct virtio_device *vdev)
+{
+	struct nvdimm_bus *nvdimm_bus = dev_get_drvdata(&vdev->dev);
+
+	nvdimm_bus_unregister(nvdimm_bus);
+	vdev->config->del_vqs(vdev);
+	vdev->config->reset(vdev);
+}
+
+static struct virtio_driver virtio_pmem_driver = {
+	.driver.name		= KBUILD_MODNAME,
+	.driver.owner		= THIS_MODULE,
+	.id_table		= id_table,
+	.probe			= virtio_pmem_probe,
+	.remove			= virtio_pmem_remove,
+};
+
+module_virtio_driver(virtio_pmem_driver);
+MODULE_DEVICE_TABLE(virtio, id_table);
+MODULE_DESCRIPTION("Virtio pmem driver");
+MODULE_LICENSE("GPL");
drivers/virtio/Kconfig +10 -0
index 35897649c24f..9f634a2ed638 100644
@@ -42,6 +42,16 @@ config VIRTIO_PCI_LEGACY
 
 	  If unsure, say Y.
 
+config VIRTIO_PMEM
+	tristate "Support for virtio pmem driver"
+	depends on VIRTIO
+	depends on LIBNVDIMM
+	help
+	This driver provides support for virtio based flushing interface
+	for persistent memory range.
+
+	If unsure, say M.
+
 config VIRTIO_BALLOON
 	tristate "Virtio balloon driver"
 	depends on VIRTIO
include/linux/virtio_pmem.h new file +60 -0
new file mode 100644
index 000000000000..ab1da877575d
@@ -0,0 +1,60 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * virtio_pmem.h: virtio pmem Driver
+ *
+ * Discovers persistent memory range information
+ * from host and provides a virtio based flushing
+ * interface.
+ **/
+
+#ifndef _LINUX_VIRTIO_PMEM_H
+#define _LINUX_VIRTIO_PMEM_H
+
+#include <linux/virtio_ids.h>
+#include <linux/module.h>
+#include <linux/virtio_config.h>
+#include <uapi/linux/virtio_pmem.h>
+#include <linux/libnvdimm.h>
+#include <linux/spinlock.h>
+
+struct virtio_pmem_request {
+	/* Host return status corresponding to flush request */
+	int ret;
+
+	/* command name*/
+	char name[16];
+
+	/* Wait queue to process deferred work after ack from host */
+	wait_queue_head_t host_acked;
+	bool done;
+
+	/* Wait queue to process deferred work after virt queue buffer avail */
+	wait_queue_head_t wq_buf;
+	bool wq_buf_avail;
+	struct list_head list;
+};
+
+struct virtio_pmem {
+	struct virtio_device *vdev;
+
+	/* Virtio pmem request queue */
+	struct virtqueue *req_vq;
+
+	/* nvdimm bus registers virtio pmem device */
+	struct nvdimm_bus *nvdimm_bus;
+	struct nvdimm_bus_descriptor nd_desc;
+
+	/* List to store deferred work if virtqueue is full */
+	struct list_head req_list;
+
+	/* Synchronize virtqueue data */
+	spinlock_t pmem_lock;
+
+	/* Memory region information */
+	uint64_t start;
+	uint64_t size;
+};
+
+void host_ack(struct virtqueue *vq);
+int async_pmem_flush(struct nd_region *nd_region, struct bio *bio);
+#endif
include/uapi/linux/virtio_ids.h +1 -0
index 6d5c3b2d4f4d..32b2f94d1f58 100644
@@ -43,5 +43,6 @@
 #define VIRTIO_ID_INPUT        18 /* virtio input */
 #define VIRTIO_ID_VSOCK        19 /* virtio vsock transport */
 #define VIRTIO_ID_CRYPTO       20 /* virtio crypto */
+#define VIRTIO_ID_PMEM         27 /* virtio pmem */
 
 #endif /* _LINUX_VIRTIO_IDS_H */
include/uapi/linux/virtio_pmem.h new file +10 -1
new file mode 100644
index 000000000000..fa3f7d52717a
@@ -0,0 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef _UAPI_LINUX_VIRTIO_PMEM_H
+#define _UAPI_LINUX_VIRTIO_PMEM_H
+
+struct virtio_pmem_config {
+	__le64 start;
+	__le64 size;
+};
+#endif
--

2.20.1

#8 lore raw

Re: [Qemu-devel] [PATCH v8 2/6] virtio-pmem: Add virtio pmem driver

In reply to Michael S. Tsirkin
Quoted 10 lines
Quoted 10 lines

Guest reads the persistent memory range information from Qemu over VIRTIO and registers it on nvdimm_bus. It also creates a nd_region object with the persistent memory range information so that existing 'nvdimm/pmem' driver can reserve this into system memory map. This way 'virtio-pmem' driver uses existing functionality of pmem driver to register persistent memory compatible for DAX capable filesystems.

Quoted 8 lines
Quoted 6 lines

This also provides function to perform guest flush over VIRTIO from 'pmem' driver when userspace performs flush on DAX memory range.

Thank you, Michael.

Best regards,
Pankaj

Quoted 395 lines
Quoted 395 lines
---
 drivers/nvdimm/Makefile          |   1 +
 drivers/nvdimm/nd_virtio.c       | 129 +++++++++++++++++++++++++++++++
 drivers/nvdimm/virtio_pmem.c     | 117 ++++++++++++++++++++++++++++
 drivers/virtio/Kconfig           |  10 +++
 include/linux/virtio_pmem.h      |  60 ++++++++++++++
 include/uapi/linux/virtio_ids.h  |   1 +
 include/uapi/linux/virtio_pmem.h |  10 +++
 7 files changed, 328 insertions(+)
 create mode 100644 drivers/nvdimm/nd_virtio.c
 create mode 100644 drivers/nvdimm/virtio_pmem.c
 create mode 100644 include/linux/virtio_pmem.h
 create mode 100644 include/uapi/linux/virtio_pmem.h
drivers/nvdimm/Makefile +1 -0
index 6f2a088afad6..cefe233e0b52 100644
@@ -5,6 +5,7 @@ obj-$(CONFIG_ND_BTT) += nd_btt.o
 obj-$(CONFIG_ND_BLK) += nd_blk.o
 obj-$(CONFIG_X86_PMEM_LEGACY) += nd_e820.o
 obj-$(CONFIG_OF_PMEM) += of_pmem.o
+obj-$(CONFIG_VIRTIO_PMEM) += virtio_pmem.o nd_virtio.o
 
 nd_pmem-y := pmem.o
 
drivers/nvdimm/nd_virtio.c new file +129 -0
new file mode 100644
index 000000000000..ed7ddcc5a62c
@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * virtio_pmem.c: Virtio pmem Driver
+ *
+ * Discovers persistent memory range information
+ * from host and provides a virtio based flushing
+ * interface.
+ */
+#include <linux/virtio_pmem.h>
+#include "nd.h"
+
+ /* The interrupt handler */
+void host_ack(struct virtqueue *vq)
+{
+	unsigned int len;
+	unsigned long flags;
+	struct virtio_pmem_request *req, *req_buf;
+	struct virtio_pmem *vpmem = vq->vdev->priv;
+
+	spin_lock_irqsave(&vpmem->pmem_lock, flags);
+	while ((req = virtqueue_get_buf(vq, &len)) != NULL) {
+		req->done = true;
+		wake_up(&req->host_acked);
+
+		if (!list_empty(&vpmem->req_list)) {
+			req_buf = list_first_entry(&vpmem->req_list,
+					struct virtio_pmem_request, list);
+			req_buf->wq_buf_avail = true;
+			wake_up(&req_buf->wq_buf);
+			list_del(&req_buf->list);
+		}
+	}
+	spin_unlock_irqrestore(&vpmem->pmem_lock, flags);
+}
+EXPORT_SYMBOL_GPL(host_ack);
+
+ /* The request submission function */
+int virtio_pmem_flush(struct nd_region *nd_region)
+{
+	int err, err1;
+	unsigned long flags;
+	struct scatterlist *sgs[2], sg, ret;
+	struct virtio_device *vdev = nd_region->provider_data;
+	struct virtio_pmem *vpmem = vdev->priv;
+	struct virtio_pmem_request *req;
+
+	might_sleep();
+	req = kmalloc(sizeof(*req), GFP_KERNEL);
+	if (!req)
+		return -ENOMEM;
+
+	req->done = false;
+	strcpy(req->name, "FLUSH");
+	init_waitqueue_head(&req->host_acked);
+	init_waitqueue_head(&req->wq_buf);
+	INIT_LIST_HEAD(&req->list);
+	sg_init_one(&sg, req->name, strlen(req->name));
+	sgs[0] = &sg;
+	sg_init_one(&ret, &req->ret, sizeof(req->ret));
+	sgs[1] = &ret;
+
+	spin_lock_irqsave(&vpmem->pmem_lock, flags);
+	 /*
+	  * If virtqueue_add_sgs returns -ENOSPC then req_vq virtual
+	  * queue does not have free descriptor. We add the request
+	  * to req_list and wait for host_ack to wake us up when free
+	  * slots are available.
+	  */
+	while ((err = virtqueue_add_sgs(vpmem->req_vq, sgs, 1, 1, req,
+					GFP_ATOMIC)) == -ENOSPC) {
+
+		dev_err(&vdev->dev, "failed to send command to virtio pmem"\
+			"device, no free slots in the virtqueue\n");
+		req->wq_buf_avail = false;
+		list_add_tail(&req->list, &vpmem->req_list);
+		spin_unlock_irqrestore(&vpmem->pmem_lock, flags);
+
+		/* When host has read buffer, this completes via host_ack */
+		wait_event(req->wq_buf, req->wq_buf_avail);
+		spin_lock_irqsave(&vpmem->pmem_lock, flags);
+	}
+	err1 = virtqueue_kick(vpmem->req_vq);
+	spin_unlock_irqrestore(&vpmem->pmem_lock, flags);
+
+	/*
+	 * virtqueue_add_sgs failed with error different than -ENOSPC, we can't
+	 * do anything about that.
+	 */
+	if (err || !err1) {
+		dev_info(&vdev->dev, "failed to send command to virtio pmem device\n");
+		err = -EIO;
+		goto ret;
+	}
+
+	/* When host has read buffer, this completes via host_ack */
+	wait_event(req->host_acked, req->done);
+	err = req->ret;
+ret:
+	kfree(req);
+	return err;
+};
+
+/* The asynchronous flush callback function */
+int async_pmem_flush(struct nd_region *nd_region, struct bio *bio)
+{
+	int rc = 0;
+
+	/* Create child bio for asynchronous flush and chain with
+	 * parent bio. Otherwise directly call nd_region flush.
+	 */
+	if (bio && bio->bi_iter.bi_sector != -1) {
+		struct bio *child = bio_alloc(GFP_ATOMIC, 0);
+
+		if (!child)
+			return -ENOMEM;
+		bio_copy_dev(child, bio);
+		child->bi_opf = REQ_PREFLUSH;
+		child->bi_iter.bi_sector = -1;
+		bio_chain(child, bio);
+		submit_bio(child);
+	} else {
+		if (virtio_pmem_flush(nd_region))
+			rc = -EIO;
+	}
+
+	return rc;
+};
+EXPORT_SYMBOL_GPL(async_pmem_flush);
+MODULE_LICENSE("GPL");
drivers/nvdimm/virtio_pmem.c new file +117 -0
new file mode 100644
index 000000000000..cfc6381c4e5d
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * virtio_pmem.c: Virtio pmem Driver
+ *
+ * Discovers persistent memory range information
+ * from host and registers the virtual pmem device
+ * with libnvdimm core.
+ */
+#include <linux/virtio_pmem.h>
+#include "nd.h"
+
+static struct virtio_device_id id_table[] = {
+	{ VIRTIO_ID_PMEM, VIRTIO_DEV_ANY_ID },
+	{ 0 },
+};
+
+ /* Initialize virt queue */
+static int init_vq(struct virtio_pmem *vpmem)
+{
+	/* single vq */
+	vpmem->req_vq = virtio_find_single_vq(vpmem->vdev,
+				host_ack, "flush_queue");
+	if (IS_ERR(vpmem->req_vq))
+		return PTR_ERR(vpmem->req_vq);
+
+	spin_lock_init(&vpmem->pmem_lock);
+	INIT_LIST_HEAD(&vpmem->req_list);
+
+	return 0;
+};
+
+static int virtio_pmem_probe(struct virtio_device *vdev)
+{
+	int err = 0;
+	struct resource res;
+	struct virtio_pmem *vpmem;
+	struct nd_region_desc ndr_desc = {};
+	int nid = dev_to_node(&vdev->dev);
+	struct nd_region *nd_region;
+
+	if (!vdev->config->get) {
+		dev_err(&vdev->dev, "%s failure: config access disabled\n",
+			__func__);
+		return -EINVAL;
+	}
+
+	vpmem = devm_kzalloc(&vdev->dev, sizeof(*vpmem), GFP_KERNEL);
+	if (!vpmem) {
+		err = -ENOMEM;
+		goto out_err;
+	}
+
+	vpmem->vdev = vdev;
+	vdev->priv = vpmem;
+	err = init_vq(vpmem);
+	if (err)
+		goto out_err;
+
+	virtio_cread(vpmem->vdev, struct virtio_pmem_config,
+			start, &vpmem->start);
+	virtio_cread(vpmem->vdev, struct virtio_pmem_config,
+			size, &vpmem->size);
+
+	res.start = vpmem->start;
+	res.end   = vpmem->start + vpmem->size-1;
+	vpmem->nd_desc.provider_name = "virtio-pmem";
+	vpmem->nd_desc.module = THIS_MODULE;
+
+	vpmem->nvdimm_bus = nvdimm_bus_register(&vdev->dev,
+						&vpmem->nd_desc);
+	if (!vpmem->nvdimm_bus)
+		goto out_vq;
+
+	dev_set_drvdata(&vdev->dev, vpmem->nvdimm_bus);
+
+	ndr_desc.res = &res;
+	ndr_desc.numa_node = nid;
+	ndr_desc.flush = async_pmem_flush;
+	set_bit(ND_REGION_PAGEMAP, &ndr_desc.flags);
+	set_bit(ND_REGION_ASYNC, &ndr_desc.flags);
+	nd_region = nvdimm_pmem_region_create(vpmem->nvdimm_bus, &ndr_desc);
+
+	if (!nd_region)
+		goto out_nd;
+	nd_region->provider_data = dev_to_virtio(nd_region->dev.parent->parent);
+	return 0;
+out_nd:
+	err = -ENXIO;
+	nvdimm_bus_unregister(vpmem->nvdimm_bus);
+out_vq:
+	vdev->config->del_vqs(vdev);
+out_err:
+	dev_err(&vdev->dev, "failed to register virtio pmem memory\n");
+	return err;
+}
+
+static void virtio_pmem_remove(struct virtio_device *vdev)
+{
+	struct nvdimm_bus *nvdimm_bus = dev_get_drvdata(&vdev->dev);
+
+	nvdimm_bus_unregister(nvdimm_bus);
+	vdev->config->del_vqs(vdev);
+	vdev->config->reset(vdev);
+}
+
+static struct virtio_driver virtio_pmem_driver = {
+	.driver.name		= KBUILD_MODNAME,
+	.driver.owner		= THIS_MODULE,
+	.id_table		= id_table,
+	.probe			= virtio_pmem_probe,
+	.remove			= virtio_pmem_remove,
+};
+
+module_virtio_driver(virtio_pmem_driver);
+MODULE_DEVICE_TABLE(virtio, id_table);
+MODULE_DESCRIPTION("Virtio pmem driver");
+MODULE_LICENSE("GPL");
drivers/virtio/Kconfig +10 -0
index 35897649c24f..9f634a2ed638 100644
@@ -42,6 +42,16 @@ config VIRTIO_PCI_LEGACY
 
 	  If unsure, say Y.
 
+config VIRTIO_PMEM
+	tristate "Support for virtio pmem driver"
+	depends on VIRTIO
+	depends on LIBNVDIMM
+	help
+	This driver provides support for virtio based flushing interface
+	for persistent memory range.
+
+	If unsure, say M.
+
 config VIRTIO_BALLOON
 	tristate "Virtio balloon driver"
 	depends on VIRTIO
include/linux/virtio_pmem.h new file +60 -0
new file mode 100644
index 000000000000..ab1da877575d
@@ -0,0 +1,60 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * virtio_pmem.h: virtio pmem Driver
+ *
+ * Discovers persistent memory range information
+ * from host and provides a virtio based flushing
+ * interface.
+ **/
+
+#ifndef _LINUX_VIRTIO_PMEM_H
+#define _LINUX_VIRTIO_PMEM_H
+
+#include <linux/virtio_ids.h>
+#include <linux/module.h>
+#include <linux/virtio_config.h>
+#include <uapi/linux/virtio_pmem.h>
+#include <linux/libnvdimm.h>
+#include <linux/spinlock.h>
+
+struct virtio_pmem_request {
+	/* Host return status corresponding to flush request */
+	int ret;
+
+	/* command name*/
+	char name[16];
+
+	/* Wait queue to process deferred work after ack from host */
+	wait_queue_head_t host_acked;
+	bool done;
+
+	/* Wait queue to process deferred work after virt queue buffer avail */
+	wait_queue_head_t wq_buf;
+	bool wq_buf_avail;
+	struct list_head list;
+};
+
+struct virtio_pmem {
+	struct virtio_device *vdev;
+
+	/* Virtio pmem request queue */
+	struct virtqueue *req_vq;
+
+	/* nvdimm bus registers virtio pmem device */
+	struct nvdimm_bus *nvdimm_bus;
+	struct nvdimm_bus_descriptor nd_desc;
+
+	/* List to store deferred work if virtqueue is full */
+	struct list_head req_list;
+
+	/* Synchronize virtqueue data */
+	spinlock_t pmem_lock;
+
+	/* Memory region information */
+	uint64_t start;
+	uint64_t size;
+};
+
+void host_ack(struct virtqueue *vq);
+int async_pmem_flush(struct nd_region *nd_region, struct bio *bio);
+#endif
include/uapi/linux/virtio_ids.h +1 -0
index 6d5c3b2d4f4d..32b2f94d1f58 100644
@@ -43,5 +43,6 @@
 #define VIRTIO_ID_INPUT        18 /* virtio input */
 #define VIRTIO_ID_VSOCK        19 /* virtio vsock transport */
 #define VIRTIO_ID_CRYPTO       20 /* virtio crypto */
+#define VIRTIO_ID_PMEM         27 /* virtio pmem */
 
 #endif /* _LINUX_VIRTIO_IDS_H */
include/uapi/linux/virtio_pmem.h new file +4 -0
new file mode 100644
index 000000000000..fa3f7d52717a
@@ -0,0 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef _UAPI_LINUX_VIRTIO_PMEM_H
+#define _UAPI_LINUX_VIRTIO_PMEM_H
Quoted 10 lines
Quoted 8 lines
include/uapi/linux/virtio_pmem.h new file +6 -1
+
+struct virtio_pmem_config {
+	__le64 start;
+	__le64 size;
+};
+#endif
--

2.20.1

_______________________________________________
Linux-nvdimm mailing list
[email protected]
https://lists.01.org/mailman/listinfo/linux-nvdimm

#9 lore raw

Re: [PATCH v8 2/6] virtio-pmem: Add virtio pmem driver

In reply to Pankaj Gupta
Quoted 57 lines · Pankaj Gupta

This patch adds virtio-pmem driver for KVM guest.

Guest reads the persistent memory range information from Qemu over VIRTIO and registers it on nvdimm_bus. It also creates a nd_region object with the persistent memory range information so that existing 'nvdimm/pmem' driver can reserve this into system memory map. This way 'virtio-pmem' driver uses existing functionality of pmem driver to register persistent memory compatible for DAX capable filesystems.

This also provides function to perform guest flush over VIRTIO from 'pmem' driver when userspace performs flush on DAX memory range.

---
 drivers/nvdimm/Makefile          |   1 +
 drivers/nvdimm/nd_virtio.c       | 129 +++++++++++++++++++++++++++++++
 drivers/nvdimm/virtio_pmem.c     | 117 ++++++++++++++++++++++++++++
 drivers/virtio/Kconfig           |  10 +++
 include/linux/virtio_pmem.h      |  60 ++++++++++++++
 include/uapi/linux/virtio_ids.h  |   1 +
 include/uapi/linux/virtio_pmem.h |  10 +++
 7 files changed, 328 insertions(+)
 create mode 100644 drivers/nvdimm/nd_virtio.c
 create mode 100644 drivers/nvdimm/virtio_pmem.c
 create mode 100644 include/linux/virtio_pmem.h
 create mode 100644 include/uapi/linux/virtio_pmem.h
drivers/nvdimm/Makefile +1 -0
index 6f2a088afad6..cefe233e0b52 100644
@@ -5,6 +5,7 @@ obj-$(CONFIG_ND_BTT) += nd_btt.o
 obj-$(CONFIG_ND_BLK) += nd_blk.o
 obj-$(CONFIG_X86_PMEM_LEGACY) += nd_e820.o
 obj-$(CONFIG_OF_PMEM) += of_pmem.o
+obj-$(CONFIG_VIRTIO_PMEM) += virtio_pmem.o nd_virtio.o
 
 nd_pmem-y := pmem.o
 
drivers/nvdimm/nd_virtio.c new file +8 -0
new file mode 100644
index 000000000000..ed7ddcc5a62c
@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * virtio_pmem.c: Virtio pmem Driver
+ *
+ * Discovers persistent memory range information
+ * from host and provides a virtio based flushing
+ * interface.
+ */

drivers/nvdimm/nd_virtio.c line 18

Quoted 10 lines
drivers/nvdimm/nd_virtio.c new file +10 -0
+#include <linux/virtio_pmem.h>
+#include "nd.h"
+
+ /* The interrupt handler */
+void host_ack(struct virtqueue *vq)
+{
+	unsigned int len;
+	unsigned long flags;
+	struct virtio_pmem_request *req, *req_buf;
+	struct virtio_pmem *vpmem = vq->vdev->priv;

Nit: use reverse Christmas tree layout :)

Quoted 17 lines
drivers/nvdimm/nd_virtio.c new file +17 -0
+
+	spin_lock_irqsave(&vpmem->pmem_lock, flags);
+	while ((req = virtqueue_get_buf(vq, &len)) != NULL) {
+		req->done = true;
+		wake_up(&req->host_acked);
+
+		if (!list_empty(&vpmem->req_list)) {
+			req_buf = list_first_entry(&vpmem->req_list,
+					struct virtio_pmem_request, list);
+			req_buf->wq_buf_avail = true;
+			wake_up(&req_buf->wq_buf);
+			list_del(&req_buf->list);
+		}
+	}
+	spin_unlock_irqrestore(&vpmem->pmem_lock, flags);
+}
+EXPORT_SYMBOL_GPL(host_ack);

drivers/nvdimm/nd_virtio.c line 45

Quoted 10 lines
drivers/nvdimm/nd_virtio.c new file +10 -0
+
+ /* The request submission function */
+int virtio_pmem_flush(struct nd_region *nd_region)
+{
+	int err, err1;
+	unsigned long flags;
+	struct scatterlist *sgs[2], sg, ret;
+	struct virtio_device *vdev = nd_region->provider_data;
+	struct virtio_pmem *vpmem = vdev->priv;
+	struct virtio_pmem_request *req;

Nit: use reverse Christmas tree layout :)

Quoted 23 lines
drivers/nvdimm/nd_virtio.c new file +23 -0
+
+	might_sleep();
+	req = kmalloc(sizeof(*req), GFP_KERNEL);
+	if (!req)
+		return -ENOMEM;
+
+	req->done = false;
+	strcpy(req->name, "FLUSH");
+	init_waitqueue_head(&req->host_acked);
+	init_waitqueue_head(&req->wq_buf);
+	INIT_LIST_HEAD(&req->list);
+	sg_init_one(&sg, req->name, strlen(req->name));
+	sgs[0] = &sg;
+	sg_init_one(&ret, &req->ret, sizeof(req->ret));
+	sgs[1] = &ret;
+
+	spin_lock_irqsave(&vpmem->pmem_lock, flags);
+	 /*
+	  * If virtqueue_add_sgs returns -ENOSPC then req_vq virtual
+	  * queue does not have free descriptor. We add the request
+	  * to req_list and wait for host_ack to wake us up when free
+	  * slots are available.
+	  */

drivers/nvdimm/nd_virtio.c line 78

Quoted 10 lines
drivers/nvdimm/nd_virtio.c new file +10 -0
+	while ((err = virtqueue_add_sgs(vpmem->req_vq, sgs, 1, 1, req,
+					GFP_ATOMIC)) == -ENOSPC) {
+
+		dev_err(&vdev->dev, "failed to send command to virtio pmem"\
+			"device, no free slots in the virtqueue\n");
+		req->wq_buf_avail = false;
+		list_add_tail(&req->list, &vpmem->req_list);
+		spin_unlock_irqrestore(&vpmem->pmem_lock, flags);
+
+		/* When host has read buffer, this completes via host_ack */

"A host repsonse results in "host_ack" getting called" ... ?

Quoted 4 lines
drivers/nvdimm/nd_virtio.c new file +4 -0
+		wait_event(req->wq_buf, req->wq_buf_avail);
+		spin_lock_irqsave(&vpmem->pmem_lock, flags);
+	}
+	err1 = virtqueue_kick(vpmem->req_vq);

drivers/nvdimm/nd_virtio.c line 92

Quoted 10 lines
drivers/nvdimm/nd_virtio.c new file +10 -0
+	spin_unlock_irqrestore(&vpmem->pmem_lock, flags);
+
+	/*
+	 * virtqueue_add_sgs failed with error different than -ENOSPC, we can't
+	 * do anything about that.
+	 */
+	if (err || !err1) {
+		dev_info(&vdev->dev, "failed to send command to virtio pmem device\n");
+		err = -EIO;
+		goto ret;

Avoid the goto. Just move the following statements into an "else" case.

drivers/nvdimm/nd_virtio.c line 78

Quoted 3 lines
drivers/nvdimm/nd_virtio.c new file +3 -0
+	}
+
+	/* When host has read buffer, this completes via host_ack */

"A host repsonse results in "host_ack" getting called" ... ?

Quoted 15 lines
drivers/nvdimm/nd_virtio.c new file +15 -0
+	wait_event(req->host_acked, req->done);
+	err = req->ret;
+ret:
+	kfree(req);
+	return err;
+};
+
+/* The asynchronous flush callback function */
+int async_pmem_flush(struct nd_region *nd_region, struct bio *bio)
+{
+	int rc = 0;
+
+	/* Create child bio for asynchronous flush and chain with
+	 * parent bio. Otherwise directly call nd_region flush.
+	 */

drivers/nvdimm/nd_virtio.c line 120

Quoted 10 lines
drivers/nvdimm/nd_virtio.c new file +10 -0
+	if (bio && bio->bi_iter.bi_sector != -1) {
+		struct bio *child = bio_alloc(GFP_ATOMIC, 0);
+
+		if (!child)
+			return -ENOMEM;
+		bio_copy_dev(child, bio);
+		child->bi_opf = REQ_PREFLUSH;
+		child->bi_iter.bi_sector = -1;
+		bio_chain(child, bio);
+		submit_bio(child);

return 0;

Then, drop the "else" case and "int rc" and do directly

if (virtio_pmem_flush(nd_region))

	return -EIO;
Quoted 27 lines
drivers/nvdimm/nd_virtio.c new file +9 -0
+	} else {
+		
+			rc = -EIO;
+	}
+
+	return rc;
+};
+EXPORT_SYMBOL_GPL(async_pmem_flush);
+MODULE_LICENSE("GPL");
drivers/nvdimm/virtio_pmem.c new file +12 -0
new file mode 100644
index 000000000000..cfc6381c4e5d
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * virtio_pmem.c: Virtio pmem Driver
+ *
+ * Discovers persistent memory range information
+ * from host and registers the virtual pmem device
+ * with libnvdimm core.
+ */
+#include <linux/virtio_pmem.h>
+#include "nd.h"
+
+static struct virtio_device_id id_table[] = {

drivers/nvdimm/virtio_pmem.c line 22

Quoted 10 lines
drivers/nvdimm/virtio_pmem.c new file +10 -0
+	{ VIRTIO_ID_PMEM, VIRTIO_DEV_ANY_ID },
+	{ 0 },
+};
+
+ /* Initialize virt queue */
+static int init_vq(struct virtio_pmem *vpmem)
+{
+	/* single vq */
+	vpmem->req_vq = virtio_find_single_vq(vpmem->vdev,
+				host_ack, "flush_queue");

Nit: Wrong indentation of parameters.

drivers/nvdimm/virtio_pmem.c line 27

Quoted 5 lines
drivers/nvdimm/virtio_pmem.c new file +5 -0
+	if (IS_ERR(vpmem->req_vq))
+		return PTR_ERR(vpmem->req_vq);
+
+	spin_lock_init(&vpmem->pmem_lock);
+	INIT_LIST_HEAD(&vpmem->req_list);

I would initialize the locks in the virtio_pmem_probe() directly, earlier (directly after allocating vpmem).

drivers/nvdimm/virtio_pmem.c line 39

Quoted 12 lines
drivers/nvdimm/virtio_pmem.c new file +12 -0
+
+	return 0;
+};
+
+static int virtio_pmem_probe(struct virtio_device *vdev)
+{
+	int err = 0;
+	struct resource res;
+	struct virtio_pmem *vpmem;
+	struct nd_region_desc ndr_desc = {};
+	int nid = dev_to_node(&vdev->dev);
+	struct nd_region *nd_region;

Nit: use reverse Christmas tree layout :)

Quoted 33 lines
drivers/nvdimm/virtio_pmem.c new file +33 -0
+
+	if (!vdev->config->get) {
+		dev_err(&vdev->dev, "%s failure: config access disabled\n",
+			__func__);
+		return -EINVAL;
+	}
+
+	vpmem = devm_kzalloc(&vdev->dev, sizeof(*vpmem), GFP_KERNEL);
+	if (!vpmem) {
+		err = -ENOMEM;
+		goto out_err;
+	}
+
+	vpmem->vdev = vdev;
+	vdev->priv = vpmem;
+	err = init_vq(vpmem);
+	if (err)
+		goto out_err;
+
+	virtio_cread(vpmem->vdev, struct virtio_pmem_config,
+			start, &vpmem->start);
+	virtio_cread(vpmem->vdev, struct virtio_pmem_config,
+			size, &vpmem->size);
+
+	res.start = vpmem->start;
+	res.end   = vpmem->start + vpmem->size-1;
+	vpmem->nd_desc.provider_name = "virtio-pmem";
+	vpmem->nd_desc.module = THIS_MODULE;
+
+	vpmem->nvdimm_bus = nvdimm_bus_register(&vdev->dev,
+						&vpmem->nd_desc);
+	if (!vpmem->nvdimm_bus)
+		goto out_vq;

drivers/nvdimm/virtio_pmem.c line 82

Quoted 10 lines
drivers/nvdimm/virtio_pmem.c new file +10 -0
+
+	dev_set_drvdata(&vdev->dev, vpmem->nvdimm_bus);
+
+	ndr_desc.res = &res;
+	ndr_desc.numa_node = nid;
+	ndr_desc.flush = async_pmem_flush;
+	set_bit(ND_REGION_PAGEMAP, &ndr_desc.flags);
+	set_bit(ND_REGION_ASYNC, &ndr_desc.flags);
+	nd_region = nvdimm_pmem_region_create(vpmem->nvdimm_bus, &ndr_desc);
+

I'd drop this empty line.

drivers/nvdimm/virtio_pmem.c line 85

Quoted 3 lines
drivers/nvdimm/virtio_pmem.c new file +3 -0
+	if (!nd_region)
+		goto out_nd;
+	nd_region->provider_data = dev_to_virtio(nd_region->dev.parent->parent);

Does it make sense to move some parts into separate functions for readability? E.g., virtio_pmem_init_nvdimm_bus()

drivers/nvdimm/virtio_pmem.c line 88

Quoted 3 lines
drivers/nvdimm/virtio_pmem.c new file +3 -0
+	return 0;
+out_nd:
+	err = -ENXIO;

I'd always initialize "err" along with the goto statement for readability, especially because ...

drivers/nvdimm/virtio_pmem.c line 90

Quoted 2 lines
drivers/nvdimm/virtio_pmem.c new file +2 -0
+	nvdimm_bus_unregister(vpmem->nvdimm_bus);
+out_vq:

... you don't initialize err in this case. Err is here 0 if I am not wrong.

drivers/nvdimm/virtio_pmem.c line 93

Quoted 3 lines
drivers/nvdimm/virtio_pmem.c new file +3 -0
+	vdev->config->del_vqs(vdev);
+out_err:
+	dev_err(&vdev->dev, "failed to register virtio pmem memory\n");

Should we try to give more meaning full messages? I can think of scenarios like "memory region is not properly aligned" or "out of memory".

drivers/nvdimm/virtio_pmem.c line 100

Quoted 7 lines
drivers/nvdimm/virtio_pmem.c new file +7 -0
+	return err;
+}
+
+static void virtio_pmem_remove(struct virtio_device *vdev)
+{
+	struct nvdimm_bus *nvdimm_bus = dev_get_drvdata(&vdev->dev);
+

Is the nd_region implicitly cleaned up?

You are not freeing "vdev->priv".

Quoted 22 lines
drivers/nvdimm/virtio_pmem.c new file +17 -0
+	nvdimm_bus_unregister(nvdimm_bus);
+	vdev->config->del_vqs(vdev);
+	vdev->config->reset(vdev);
+}
+
+static struct virtio_driver virtio_pmem_driver = {
+	.driver.name		= KBUILD_MODNAME,
+	.driver.owner		= THIS_MODULE,
+	.id_table		= id_table,
+	.probe			= virtio_pmem_probe,
+	.remove			= virtio_pmem_remove,
+};
+
+module_virtio_driver(virtio_pmem_driver);
+MODULE_DEVICE_TABLE(virtio, id_table);
+MODULE_DESCRIPTION("Virtio pmem driver");
+MODULE_LICENSE("GPL");
drivers/virtio/Kconfig +0 -0
index 35897649c24f..9f634a2ed638 100644

drivers/virtio/Kconfig config VIRTIO_PCI_LEGACY · line 51

Quoted 10 lines
drivers/virtio/Kconfig +7 -0
@@ -42,6 +42,16 @@ config VIRTIO_PCI_LEGACY
 
 	  If unsure, say Y.
 
+config VIRTIO_PMEM
+	tristate "Support for virtio pmem driver"
+	depends on VIRTIO
+	depends on LIBNVDIMM
+	help
+	This driver provides support for virtio based flushing interface
+	for persistent memory range.

"This driver provides access to virtio-pmem devices, storage devices that are mapped into the physical address space - similar to NVDIMMs - with a virtio-based flushing interface." ... ?

Quoted 3 lines
drivers/virtio/Kconfig +3 -0
+
+	If unsure, say M.
+
Signature · 3 lines
Thanks,

David / dhildenb
#10 lore raw

Re: [PATCH v8 2/6] virtio-pmem: Add virtio pmem driver

In reply to Pankaj Gupta
Quoted 57 lines · Pankaj Gupta

This patch adds virtio-pmem driver for KVM guest.

Guest reads the persistent memory range information from Qemu over VIRTIO and registers it on nvdimm_bus. It also creates a nd_region object with the persistent memory range information so that existing 'nvdimm/pmem' driver can reserve this into system memory map. This way 'virtio-pmem' driver uses existing functionality of pmem driver to register persistent memory compatible for DAX capable filesystems.

This also provides function to perform guest flush over VIRTIO from 'pmem' driver when userspace performs flush on DAX memory range.

---
 drivers/nvdimm/Makefile          |   1 +
 drivers/nvdimm/nd_virtio.c       | 129 +++++++++++++++++++++++++++++++
 drivers/nvdimm/virtio_pmem.c     | 117 ++++++++++++++++++++++++++++
 drivers/virtio/Kconfig           |  10 +++
 include/linux/virtio_pmem.h      |  60 ++++++++++++++
 include/uapi/linux/virtio_ids.h  |   1 +
 include/uapi/linux/virtio_pmem.h |  10 +++
 7 files changed, 328 insertions(+)
 create mode 100644 drivers/nvdimm/nd_virtio.c
 create mode 100644 drivers/nvdimm/virtio_pmem.c
 create mode 100644 include/linux/virtio_pmem.h
 create mode 100644 include/uapi/linux/virtio_pmem.h
drivers/nvdimm/Makefile +1 -0
index 6f2a088afad6..cefe233e0b52 100644
@@ -5,6 +5,7 @@ obj-$(CONFIG_ND_BTT) += nd_btt.o
 obj-$(CONFIG_ND_BLK) += nd_blk.o
 obj-$(CONFIG_X86_PMEM_LEGACY) += nd_e820.o
 obj-$(CONFIG_OF_PMEM) += of_pmem.o
+obj-$(CONFIG_VIRTIO_PMEM) += virtio_pmem.o nd_virtio.o
 
 nd_pmem-y := pmem.o
 
drivers/nvdimm/nd_virtio.c new file +8 -0
new file mode 100644
index 000000000000..ed7ddcc5a62c
@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * virtio_pmem.c: Virtio pmem Driver
+ *
+ * Discovers persistent memory range information
+ * from host and provides a virtio based flushing
+ * interface.
+ */

drivers/nvdimm/nd_virtio.c line 18

Quoted 10 lines
drivers/nvdimm/nd_virtio.c new file +10 -0
+#include <linux/virtio_pmem.h>
+#include "nd.h"
+
+ /* The interrupt handler */
+void host_ack(struct virtqueue *vq)
+{
+	unsigned int len;
+	unsigned long flags;
+	struct virtio_pmem_request *req, *req_buf;
+	struct virtio_pmem *vpmem = vq->vdev->priv;

Nit: use reverse Christmas tree layout :)

Quoted 17 lines
drivers/nvdimm/nd_virtio.c new file +17 -0
+
+	spin_lock_irqsave(&vpmem->pmem_lock, flags);
+	while ((req = virtqueue_get_buf(vq, &len)) != NULL) {
+		req->done = true;
+		wake_up(&req->host_acked);
+
+		if (!list_empty(&vpmem->req_list)) {
+			req_buf = list_first_entry(&vpmem->req_list,
+					struct virtio_pmem_request, list);
+			req_buf->wq_buf_avail = true;
+			wake_up(&req_buf->wq_buf);
+			list_del(&req_buf->list);
+		}
+	}
+	spin_unlock_irqrestore(&vpmem->pmem_lock, flags);
+}
+EXPORT_SYMBOL_GPL(host_ack);

drivers/nvdimm/nd_virtio.c line 45

Quoted 10 lines
drivers/nvdimm/nd_virtio.c new file +10 -0
+
+ /* The request submission function */
+int virtio_pmem_flush(struct nd_region *nd_region)
+{
+	int err, err1;
+	unsigned long flags;
+	struct scatterlist *sgs[2], sg, ret;
+	struct virtio_device *vdev = nd_region->provider_data;
+	struct virtio_pmem *vpmem = vdev->priv;
+	struct virtio_pmem_request *req;

Nit: use reverse Christmas tree layout :)

Quoted 23 lines
drivers/nvdimm/nd_virtio.c new file +23 -0
+
+	might_sleep();
+	req = kmalloc(sizeof(*req), GFP_KERNEL);
+	if (!req)
+		return -ENOMEM;
+
+	req->done = false;
+	strcpy(req->name, "FLUSH");
+	init_waitqueue_head(&req->host_acked);
+	init_waitqueue_head(&req->wq_buf);
+	INIT_LIST_HEAD(&req->list);
+	sg_init_one(&sg, req->name, strlen(req->name));
+	sgs[0] = &sg;
+	sg_init_one(&ret, &req->ret, sizeof(req->ret));
+	sgs[1] = &ret;
+
+	spin_lock_irqsave(&vpmem->pmem_lock, flags);
+	 /*
+	  * If virtqueue_add_sgs returns -ENOSPC then req_vq virtual
+	  * queue does not have free descriptor. We add the request
+	  * to req_list and wait for host_ack to wake us up when free
+	  * slots are available.
+	  */

drivers/nvdimm/nd_virtio.c line 78

Quoted 10 lines
drivers/nvdimm/nd_virtio.c new file +10 -0
+	while ((err = virtqueue_add_sgs(vpmem->req_vq, sgs, 1, 1, req,
+					GFP_ATOMIC)) == -ENOSPC) {
+
+		dev_err(&vdev->dev, "failed to send command to virtio pmem"\
+			"device, no free slots in the virtqueue\n");
+		req->wq_buf_avail = false;
+		list_add_tail(&req->list, &vpmem->req_list);
+		spin_unlock_irqrestore(&vpmem->pmem_lock, flags);
+
+		/* When host has read buffer, this completes via host_ack */

"A host repsonse results in "host_ack" getting called" ... ?

Quoted 4 lines
drivers/nvdimm/nd_virtio.c new file +4 -0
+		wait_event(req->wq_buf, req->wq_buf_avail);
+		spin_lock_irqsave(&vpmem->pmem_lock, flags);
+	}
+	err1 = virtqueue_kick(vpmem->req_vq);

drivers/nvdimm/nd_virtio.c line 92

Quoted 10 lines
drivers/nvdimm/nd_virtio.c new file +10 -0
+	spin_unlock_irqrestore(&vpmem->pmem_lock, flags);
+
+	/*
+	 * virtqueue_add_sgs failed with error different than -ENOSPC, we can't
+	 * do anything about that.
+	 */
+	if (err || !err1) {
+		dev_info(&vdev->dev, "failed to send command to virtio pmem device\n");
+		err = -EIO;
+		goto ret;

Avoid the goto. Just move the following statements into an "else" case.

drivers/nvdimm/nd_virtio.c line 78

Quoted 3 lines
drivers/nvdimm/nd_virtio.c new file +3 -0
+	}
+
+	/* When host has read buffer, this completes via host_ack */

"A host repsonse results in "host_ack" getting called" ... ?

Quoted 15 lines
drivers/nvdimm/nd_virtio.c new file +15 -0
+	wait_event(req->host_acked, req->done);
+	err = req->ret;
+ret:
+	kfree(req);
+	return err;
+};
+
+/* The asynchronous flush callback function */
+int async_pmem_flush(struct nd_region *nd_region, struct bio *bio)
+{
+	int rc = 0;
+
+	/* Create child bio for asynchronous flush and chain with
+	 * parent bio. Otherwise directly call nd_region flush.
+	 */

drivers/nvdimm/nd_virtio.c line 120

Quoted 10 lines
drivers/nvdimm/nd_virtio.c new file +10 -0
+	if (bio && bio->bi_iter.bi_sector != -1) {
+		struct bio *child = bio_alloc(GFP_ATOMIC, 0);
+
+		if (!child)
+			return -ENOMEM;
+		bio_copy_dev(child, bio);
+		child->bi_opf = REQ_PREFLUSH;
+		child->bi_iter.bi_sector = -1;
+		bio_chain(child, bio);
+		submit_bio(child);

return 0;

Then, drop the "else" case and "int rc" and do directly

if (virtio_pmem_flush(nd_region))

	return -EIO;
Quoted 27 lines
drivers/nvdimm/nd_virtio.c new file +9 -0
+	} else {
+		
+			rc = -EIO;
+	}
+
+	return rc;
+};
+EXPORT_SYMBOL_GPL(async_pmem_flush);
+MODULE_LICENSE("GPL");
drivers/nvdimm/virtio_pmem.c new file +12 -0
new file mode 100644
index 000000000000..cfc6381c4e5d
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * virtio_pmem.c: Virtio pmem Driver
+ *
+ * Discovers persistent memory range information
+ * from host and registers the virtual pmem device
+ * with libnvdimm core.
+ */
+#include <linux/virtio_pmem.h>
+#include "nd.h"
+
+static struct virtio_device_id id_table[] = {

drivers/nvdimm/virtio_pmem.c line 22

Quoted 10 lines
drivers/nvdimm/virtio_pmem.c new file +10 -0
+	{ VIRTIO_ID_PMEM, VIRTIO_DEV_ANY_ID },
+	{ 0 },
+};
+
+ /* Initialize virt queue */
+static int init_vq(struct virtio_pmem *vpmem)
+{
+	/* single vq */
+	vpmem->req_vq = virtio_find_single_vq(vpmem->vdev,
+				host_ack, "flush_queue");

Nit: Wrong indentation of parameters.

drivers/nvdimm/virtio_pmem.c line 27

Quoted 5 lines
drivers/nvdimm/virtio_pmem.c new file +5 -0
+	if (IS_ERR(vpmem->req_vq))
+		return PTR_ERR(vpmem->req_vq);
+
+	spin_lock_init(&vpmem->pmem_lock);
+	INIT_LIST_HEAD(&vpmem->req_list);

I would initialize the locks in the virtio_pmem_probe() directly, earlier (directly after allocating vpmem).

drivers/nvdimm/virtio_pmem.c line 39

Quoted 12 lines
drivers/nvdimm/virtio_pmem.c new file +12 -0
+
+	return 0;
+};
+
+static int virtio_pmem_probe(struct virtio_device *vdev)
+{
+	int err = 0;
+	struct resource res;
+	struct virtio_pmem *vpmem;
+	struct nd_region_desc ndr_desc = {};
+	int nid = dev_to_node(&vdev->dev);
+	struct nd_region *nd_region;

Nit: use reverse Christmas tree layout :)

Quoted 33 lines
drivers/nvdimm/virtio_pmem.c new file +33 -0
+
+	if (!vdev->config->get) {
+		dev_err(&vdev->dev, "%s failure: config access disabled\n",
+			__func__);
+		return -EINVAL;
+	}
+
+	vpmem = devm_kzalloc(&vdev->dev, sizeof(*vpmem), GFP_KERNEL);
+	if (!vpmem) {
+		err = -ENOMEM;
+		goto out_err;
+	}
+
+	vpmem->vdev = vdev;
+	vdev->priv = vpmem;
+	err = init_vq(vpmem);
+	if (err)
+		goto out_err;
+
+	virtio_cread(vpmem->vdev, struct virtio_pmem_config,
+			start, &vpmem->start);
+	virtio_cread(vpmem->vdev, struct virtio_pmem_config,
+			size, &vpmem->size);
+
+	res.start = vpmem->start;
+	res.end   = vpmem->start + vpmem->size-1;
+	vpmem->nd_desc.provider_name = "virtio-pmem";
+	vpmem->nd_desc.module = THIS_MODULE;
+
+	vpmem->nvdimm_bus = nvdimm_bus_register(&vdev->dev,
+						&vpmem->nd_desc);
+	if (!vpmem->nvdimm_bus)
+		goto out_vq;

drivers/nvdimm/virtio_pmem.c line 82

Quoted 10 lines
drivers/nvdimm/virtio_pmem.c new file +10 -0
+
+	dev_set_drvdata(&vdev->dev, vpmem->nvdimm_bus);
+
+	ndr_desc.res = &res;
+	ndr_desc.numa_node = nid;
+	ndr_desc.flush = async_pmem_flush;
+	set_bit(ND_REGION_PAGEMAP, &ndr_desc.flags);
+	set_bit(ND_REGION_ASYNC, &ndr_desc.flags);
+	nd_region = nvdimm_pmem_region_create(vpmem->nvdimm_bus, &ndr_desc);
+

I'd drop this empty line.

drivers/nvdimm/virtio_pmem.c line 85

Quoted 3 lines
drivers/nvdimm/virtio_pmem.c new file +3 -0
+	if (!nd_region)
+		goto out_nd;
+	nd_region->provider_data = dev_to_virtio(nd_region->dev.parent->parent);

Does it make sense to move some parts into separate functions for readability? E.g., virtio_pmem_init_nvdimm_bus()

drivers/nvdimm/virtio_pmem.c line 88

Quoted 3 lines
drivers/nvdimm/virtio_pmem.c new file +3 -0
+	return 0;
+out_nd:
+	err = -ENXIO;

I'd always initialize "err" along with the goto statement for readability, especially because ...

drivers/nvdimm/virtio_pmem.c line 90

Quoted 2 lines
drivers/nvdimm/virtio_pmem.c new file +2 -0
+	nvdimm_bus_unregister(vpmem->nvdimm_bus);
+out_vq:

... you don't initialize err in this case. Err is here 0 if I am not wrong.

drivers/nvdimm/virtio_pmem.c line 93

Quoted 3 lines
drivers/nvdimm/virtio_pmem.c new file +3 -0
+	vdev->config->del_vqs(vdev);
+out_err:
+	dev_err(&vdev->dev, "failed to register virtio pmem memory\n");

Should we try to give more meaning full messages? I can think of scenarios like "memory region is not properly aligned" or "out of memory".

drivers/nvdimm/virtio_pmem.c line 100

Quoted 7 lines
drivers/nvdimm/virtio_pmem.c new file +7 -0
+	return err;
+}
+
+static void virtio_pmem_remove(struct virtio_device *vdev)
+{
+	struct nvdimm_bus *nvdimm_bus = dev_get_drvdata(&vdev->dev);
+

Is the nd_region implicitly cleaned up?

You are not freeing "vdev->priv".

Quoted 22 lines
drivers/nvdimm/virtio_pmem.c new file +17 -0
+	nvdimm_bus_unregister(nvdimm_bus);
+	vdev->config->del_vqs(vdev);
+	vdev->config->reset(vdev);
+}
+
+static struct virtio_driver virtio_pmem_driver = {
+	.driver.name		= KBUILD_MODNAME,
+	.driver.owner		= THIS_MODULE,
+	.id_table		= id_table,
+	.probe			= virtio_pmem_probe,
+	.remove			= virtio_pmem_remove,
+};
+
+module_virtio_driver(virtio_pmem_driver);
+MODULE_DEVICE_TABLE(virtio, id_table);
+MODULE_DESCRIPTION("Virtio pmem driver");
+MODULE_LICENSE("GPL");
drivers/virtio/Kconfig +0 -0
index 35897649c24f..9f634a2ed638 100644

drivers/virtio/Kconfig config VIRTIO_PCI_LEGACY · line 51

Quoted 10 lines
drivers/virtio/Kconfig +7 -0
@@ -42,6 +42,16 @@ config VIRTIO_PCI_LEGACY
 
 	  If unsure, say Y.
 
+config VIRTIO_PMEM
+	tristate "Support for virtio pmem driver"
+	depends on VIRTIO
+	depends on LIBNVDIMM
+	help
+	This driver provides support for virtio based flushing interface
+	for persistent memory range.

"This driver provides access to virtio-pmem devices, storage devices that are mapped into the physical address space - similar to NVDIMMs - with a virtio-based flushing interface." ... ?

Quoted 3 lines
drivers/virtio/Kconfig +3 -0
+
+	If unsure, say M.
+
Signature · 7 lines
Thanks,

David / dhildenb
_______________________________________________
Linux-nvdimm mailing list
[email protected]
https://lists.01.org/mailman/listinfo/linux-nvdimm
#11 lore raw

Re: [PATCH v8 2/6] virtio-pmem: Add virtio pmem driver

Hi David,

Thank you for the review.

Quoted 62 lines · Pankaj Gupta
Quoted 61 lines

This patch adds virtio-pmem driver for KVM guest.

Guest reads the persistent memory range information from Qemu over VIRTIO and registers it on nvdimm_bus. It also creates a nd_region object with the persistent memory range information so that existing 'nvdimm/pmem' driver can reserve this into system memory map. This way 'virtio-pmem' driver uses existing functionality of pmem driver to register persistent memory compatible for DAX capable filesystems.

This also provides function to perform guest flush over VIRTIO from 'pmem' driver when userspace performs flush on DAX memory range.

---
 drivers/nvdimm/Makefile          |   1 +
 drivers/nvdimm/nd_virtio.c       | 129 +++++++++++++++++++++++++++++++
 drivers/nvdimm/virtio_pmem.c     | 117 ++++++++++++++++++++++++++++
 drivers/virtio/Kconfig           |  10 +++
 include/linux/virtio_pmem.h      |  60 ++++++++++++++
 include/uapi/linux/virtio_ids.h  |   1 +
 include/uapi/linux/virtio_pmem.h |  10 +++
 7 files changed, 328 insertions(+)
 create mode 100644 drivers/nvdimm/nd_virtio.c
 create mode 100644 drivers/nvdimm/virtio_pmem.c
 create mode 100644 include/linux/virtio_pmem.h
 create mode 100644 include/uapi/linux/virtio_pmem.h
drivers/nvdimm/Makefile +1 -0
index 6f2a088afad6..cefe233e0b52 100644
@@ -5,6 +5,7 @@ obj-$(CONFIG_ND_BTT) += nd_btt.o
 obj-$(CONFIG_ND_BLK) += nd_blk.o
 obj-$(CONFIG_X86_PMEM_LEGACY) += nd_e820.o
 obj-$(CONFIG_OF_PMEM) += of_pmem.o
+obj-$(CONFIG_VIRTIO_PMEM) += virtio_pmem.o nd_virtio.o
 
 nd_pmem-y := pmem.o
 
drivers/nvdimm/nd_virtio.c new file +12 -0
new file mode 100644
index 000000000000..ed7ddcc5a62c
@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * virtio_pmem.c: Virtio pmem Driver
+ *
+ * Discovers persistent memory range information
+ * from host and provides a virtio based flushing
+ * interface.
+ */
+#include <linux/virtio_pmem.h>
+#include "nd.h"
+
+ /* The interrupt handler */
Quoted 8 lines

drivers/nvdimm/nd_virtio.c line 18

Quoted 6 lines
drivers/nvdimm/nd_virtio.c new file +6 -0
+void host_ack(struct virtqueue *vq)
+{
+	unsigned int len;
+	unsigned long flags;
+	struct virtio_pmem_request *req, *req_buf;
+	struct virtio_pmem *vpmem = vq->vdev->priv;

Nit: use reverse Christmas tree layout :)

o.k

Quoted 22 lines
Quoted 22 lines
drivers/nvdimm/nd_virtio.c new file +21 -0
+
+	spin_lock_irqsave(&vpmem->pmem_lock, flags);
+	while ((req = virtqueue_get_buf(vq, &len)) != NULL) {
+		req->done = true;
+		wake_up(&req->host_acked);
+
+		if (!list_empty(&vpmem->req_list)) {
+			req_buf = list_first_entry(&vpmem->req_list,
+					struct virtio_pmem_request, list);
+			req_buf->wq_buf_avail = true;
+			wake_up(&req_buf->wq_buf);
+			list_del(&req_buf->list);
+		}
+	}
+	spin_unlock_irqrestore(&vpmem->pmem_lock, flags);
+}
+EXPORT_SYMBOL_GPL(host_ack);
+
+ /* The request submission function */
+int virtio_pmem_flush(struct nd_region *nd_region)
+{
Quoted 8 lines

drivers/nvdimm/nd_virtio.c line 45

Quoted 6 lines
drivers/nvdimm/nd_virtio.c new file +6 -0
+	int err, err1;
+	unsigned long flags;
+	struct scatterlist *sgs[2], sg, ret;
+	struct virtio_device *vdev = nd_region->provider_data;
+	struct virtio_pmem *vpmem = vdev->priv;
+	struct virtio_pmem_request *req;

Nit: use reverse Christmas tree layout :)

o.k

Quoted 28 lines
Quoted 28 lines
drivers/nvdimm/nd_virtio.c new file +27 -0
+
+	might_sleep();
+	req = kmalloc(sizeof(*req), GFP_KERNEL);
+	if (!req)
+		return -ENOMEM;
+
+	req->done = false;
+	strcpy(req->name, "FLUSH");
+	init_waitqueue_head(&req->host_acked);
+	init_waitqueue_head(&req->wq_buf);
+	INIT_LIST_HEAD(&req->list);
+	sg_init_one(&sg, req->name, strlen(req->name));
+	sgs[0] = &sg;
+	sg_init_one(&ret, &req->ret, sizeof(req->ret));
+	sgs[1] = &ret;
+
+	spin_lock_irqsave(&vpmem->pmem_lock, flags);
+	 /*
+	  * If virtqueue_add_sgs returns -ENOSPC then req_vq virtual
+	  * queue does not have free descriptor. We add the request
+	  * to req_list and wait for host_ack to wake us up when free
+	  * slots are available.
+	  */
+	while ((err = virtqueue_add_sgs(vpmem->req_vq, sgs, 1, 1, req,
+					GFP_ATOMIC)) == -ENOSPC) {
+
+		dev_err(&vdev->dev, "failed to send command to virtio pmem"\
Quoted 8 lines

drivers/nvdimm/nd_virtio.c line 78

Quoted 6 lines
drivers/nvdimm/nd_virtio.c new file +6 -0
+			"device, no free slots in the virtqueue\n");
+		req->wq_buf_avail = false;
+		list_add_tail(&req->list, &vpmem->req_list);
+		spin_unlock_irqrestore(&vpmem->pmem_lock, flags);
+
+		/* When host has read buffer, this completes via host_ack */

"A host repsonse results in "host_ack" getting called" ... ?

o.k

Quoted 17 lines
Quoted 5 lines
drivers/nvdimm/nd_virtio.c new file +4 -0
+		wait_event(req->wq_buf, req->wq_buf_avail);
+		spin_lock_irqsave(&vpmem->pmem_lock, flags);
+	}
+	err1 = virtqueue_kick(vpmem->req_vq);

drivers/nvdimm/nd_virtio.c line 92

Quoted 10 lines
drivers/nvdimm/nd_virtio.c new file +10 -0
+	spin_unlock_irqrestore(&vpmem->pmem_lock, flags);
+
+	/*
+	 * virtqueue_add_sgs failed with error different than -ENOSPC, we can't
+	 * do anything about that.
+	 */
+	if (err || !err1) {
+		dev_info(&vdev->dev, "failed to send command to virtio pmem device\n");
+		err = -EIO;
+		goto ret;

Avoid the goto. Just move the following statements into an "else" case.

o.k

Quoted 35 lines

drivers/nvdimm/nd_virtio.c line 78

Quoted 4 lines
drivers/nvdimm/nd_virtio.c new file +3 -0
+	}
+
+	/* When host has read buffer, this completes via host_ack */

"A host repsonse results in "host_ack" getting called" ... ?

Quoted 15 lines
drivers/nvdimm/nd_virtio.c new file +15 -0
+	wait_event(req->host_acked, req->done);
+	err = req->ret;
+ret:
+	kfree(req);
+	return err;
+};
+
+/* The asynchronous flush callback function */
+int async_pmem_flush(struct nd_region *nd_region, struct bio *bio)
+{
+	int rc = 0;
+
+	/* Create child bio for asynchronous flush and chain with
+	 * parent bio. Otherwise directly call nd_region flush.
+	 */

drivers/nvdimm/nd_virtio.c line 120

Quoted 10 lines
drivers/nvdimm/nd_virtio.c new file +10 -0
+	if (bio && bio->bi_iter.bi_sector != -1) {
+		struct bio *child = bio_alloc(GFP_ATOMIC, 0);
+
+		if (!child)
+			return -ENOMEM;
+		bio_copy_dev(child, bio);
+		child->bi_opf = REQ_PREFLUSH;
+		child->bi_iter.bi_sector = -1;
+		bio_chain(child, bio);
+		submit_bio(child);

return 0;

Quoted 4 lines

Then, drop the "else" case and "int rc" and do directly

if (virtio_pmem_flush(nd_region))

	return -EIO;

and another 'return 0' here :)

I don't like return from multiple places instead I prefer single exit point from function.

Quoted 32 lines
Quoted 32 lines
drivers/nvdimm/nd_virtio.c new file +9 -0
+	} else {
+
+			rc = -EIO;
+	}
+
+	return rc;
+};
+EXPORT_SYMBOL_GPL(async_pmem_flush);
+MODULE_LICENSE("GPL");
drivers/nvdimm/virtio_pmem.c new file +16 -0
new file mode 100644
index 000000000000..cfc6381c4e5d
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * virtio_pmem.c: Virtio pmem Driver
+ *
+ * Discovers persistent memory range information
+ * from host and registers the virtual pmem device
+ * with libnvdimm core.
+ */
+#include <linux/virtio_pmem.h>
+#include "nd.h"
+
+static struct virtio_device_id id_table[] = {
+	{ VIRTIO_ID_PMEM, VIRTIO_DEV_ANY_ID },
+	{ 0 },
+};
+
Quoted 8 lines

drivers/nvdimm/virtio_pmem.c line 22

Quoted 6 lines
drivers/nvdimm/virtio_pmem.c new file +6 -0
+ /* Initialize virt queue */
+static int init_vq(struct virtio_pmem *vpmem)
+{
+	/* single vq */
+	vpmem->req_vq = virtio_find_single_vq(vpmem->vdev,
+				host_ack, "flush_queue");

Nit: Wrong indentation of parameters.

o.k

Quoted 9 lines

drivers/nvdimm/virtio_pmem.c line 27

Quoted 6 lines
drivers/nvdimm/virtio_pmem.c new file +5 -0
+	if (IS_ERR(vpmem->req_vq))
+		return PTR_ERR(vpmem->req_vq);
+
+	spin_lock_init(&vpmem->pmem_lock);
+	INIT_LIST_HEAD(&vpmem->req_list);

I would initialize the locks in the virtio_pmem_probe() directly, earlier (directly after allocating vpmem).

Since the lock is to protect the vq so logically I put it in 'init_vq' which is eventually called by probe.

Quoted 15 lines

drivers/nvdimm/virtio_pmem.c line 39

Quoted 13 lines
drivers/nvdimm/virtio_pmem.c new file +12 -0
+
+	return 0;
+};
+
+static int virtio_pmem_probe(struct virtio_device *vdev)
+{
+	int err = 0;
+	struct resource res;
+	struct virtio_pmem *vpmem;
+	struct nd_region_desc ndr_desc = {};
+	int nid = dev_to_node(&vdev->dev);
+	struct nd_region *nd_region;

Nit: use reverse Christmas tree layout :)

Done.

Quoted 38 lines
Quoted 38 lines
drivers/nvdimm/virtio_pmem.c new file +37 -0
+
+	if (!vdev->config->get) {
+		dev_err(&vdev->dev, "%s failure: config access disabled\n",
+			__func__);
+		return -EINVAL;
+	}
+
+	vpmem = devm_kzalloc(&vdev->dev, sizeof(*vpmem), GFP_KERNEL);
+	if (!vpmem) {
+		err = -ENOMEM;
+		goto out_err;
+	}
+
+	vpmem->vdev = vdev;
+	vdev->priv = vpmem;
+	err = init_vq(vpmem);
+	if (err)
+		goto out_err;
+
+	virtio_cread(vpmem->vdev, struct virtio_pmem_config,
+			start, &vpmem->start);
+	virtio_cread(vpmem->vdev, struct virtio_pmem_config,
+			size, &vpmem->size);
+
+	res.start = vpmem->start;
+	res.end   = vpmem->start + vpmem->size-1;
+	vpmem->nd_desc.provider_name = "virtio-pmem";
+	vpmem->nd_desc.module = THIS_MODULE;
+
+	vpmem->nvdimm_bus = nvdimm_bus_register(&vdev->dev,
+						&vpmem->nd_desc);
+	if (!vpmem->nvdimm_bus)
+		goto out_vq;
+
+	dev_set_drvdata(&vdev->dev, vpmem->nvdimm_bus);
+
+	ndr_desc.res = &res;
Quoted 8 lines

drivers/nvdimm/virtio_pmem.c line 82

Quoted 6 lines
drivers/nvdimm/virtio_pmem.c new file +6 -0
+	ndr_desc.numa_node = nid;
+	ndr_desc.flush = async_pmem_flush;
+	set_bit(ND_REGION_PAGEMAP, &ndr_desc.flags);
+	set_bit(ND_REGION_ASYNC, &ndr_desc.flags);
+	nd_region = nvdimm_pmem_region_create(vpmem->nvdimm_bus, &ndr_desc);
+

I'd drop this empty line.

hmm.

Quoted 7 lines

drivers/nvdimm/virtio_pmem.c line 85

Quoted 4 lines
drivers/nvdimm/virtio_pmem.c new file +3 -0
+	if (!nd_region)
+		goto out_nd;
+	nd_region->provider_data = dev_to_virtio(nd_region->dev.parent->parent);

Does it make sense to move some parts into separate functions for readability? E.g., virtio_pmem_init_nvdimm_bus()

I think this function only has initialization and don't have any complex logic.

Quoted 8 lines

drivers/nvdimm/virtio_pmem.c line 88

Quoted 4 lines
drivers/nvdimm/virtio_pmem.c new file +3 -0
+	return 0;
+out_nd:
+	err = -ENXIO;

I'd always initialize "err" along with the goto statement for readability, especially because ...

Quoted 4 lines

drivers/nvdimm/virtio_pmem.c line 90

Quoted 2 lines
drivers/nvdimm/virtio_pmem.c new file +2 -0
+	nvdimm_bus_unregister(vpmem->nvdimm_bus);
+out_vq:

... you don't initialize err in this case. Err is here 0 if I am not wrong.

Right. Changed.

Quoted 7 lines

drivers/nvdimm/virtio_pmem.c line 93

Quoted 4 lines
drivers/nvdimm/virtio_pmem.c new file +3 -0
+	vdev->config->del_vqs(vdev);
+out_err:
+	dev_err(&vdev->dev, "failed to register virtio pmem memory\n");

Should we try to give more meaning full messages? I can think of scenarios like "memory region is not properly aligned" or "out of memory".

o.k

Quoted 10 lines

drivers/nvdimm/virtio_pmem.c line 100

Quoted 8 lines
drivers/nvdimm/virtio_pmem.c new file +7 -0
+	return err;
+}
+
+static void virtio_pmem_remove(struct virtio_device *vdev)
+{
+	struct nvdimm_bus *nvdimm_bus = dev_get_drvdata(&vdev->dev);
+

Is the nd_region implicitly cleaned up?

yes. it will be.

Quoted 2 lines

You are not freeing "vdev->priv".

vdev->priv is vpmem which is allocated using devm API.

Quoted 26 lines
Quoted 26 lines
drivers/nvdimm/virtio_pmem.c new file +17 -0
+	nvdimm_bus_unregister(nvdimm_bus);
+	vdev->config->del_vqs(vdev);
+	vdev->config->reset(vdev);
+}
+
+static struct virtio_driver virtio_pmem_driver = {
+	.driver.name		= KBUILD_MODNAME,
+	.driver.owner		= THIS_MODULE,
+	.id_table		= id_table,
+	.probe			= virtio_pmem_probe,
+	.remove			= virtio_pmem_remove,
+};
+
+module_virtio_driver(virtio_pmem_driver);
+MODULE_DEVICE_TABLE(virtio, id_table);
+MODULE_DESCRIPTION("Virtio pmem driver");
+MODULE_LICENSE("GPL");
drivers/virtio/Kconfig +0 -0
index 35897649c24f..9f634a2ed638 100644
@@ -42,6 +42,16 @@ config VIRTIO_PCI_LEGACY
 
 	  If unsure, say Y.
 
Quoted 11 lines

drivers/virtio/Kconfig config VIRTIO_PCI_LEGACY · line 51

Quoted 7 lines
drivers/virtio/Kconfig +7 -0
+config VIRTIO_PMEM
+	tristate "Support for virtio pmem driver"
+	depends on VIRTIO
+	depends on LIBNVDIMM
+	help
+	This driver provides support for virtio based flushing interface
+	for persistent memory range.

"This driver provides access to virtio-pmem devices, storage devices that are mapped into the physical address space - similar to NVDIMMs - with a virtio-based flushing interface." ... ?

looks better. Incorporated.

Thanks,
Pankaj

Quoted 12 lines

drivers/virtio/Kconfig config VIRTIO_PCI_LEGACY · line 54

Quoted 4 lines
drivers/virtio/Kconfig +3 -0
+
+	If unsure, say M.
+

--

Thanks,

David / dhildenb

#12 lore raw

Re: [PATCH v8 2/6] virtio-pmem: Add virtio pmem driver

In reply to David Hildenbrand

Hi David,

Thank you for the review.

Quoted 62 lines · Pankaj Gupta
Quoted 61 lines

This patch adds virtio-pmem driver for KVM guest.

Guest reads the persistent memory range information from Qemu over VIRTIO and registers it on nvdimm_bus. It also creates a nd_region object with the persistent memory range information so that existing 'nvdimm/pmem' driver can reserve this into system memory map. This way 'virtio-pmem' driver uses existing functionality of pmem driver to register persistent memory compatible for DAX capable filesystems.

This also provides function to perform guest flush over VIRTIO from 'pmem' driver when userspace performs flush on DAX memory range.

---
 drivers/nvdimm/Makefile          |   1 +
 drivers/nvdimm/nd_virtio.c       | 129 +++++++++++++++++++++++++++++++
 drivers/nvdimm/virtio_pmem.c     | 117 ++++++++++++++++++++++++++++
 drivers/virtio/Kconfig           |  10 +++
 include/linux/virtio_pmem.h      |  60 ++++++++++++++
 include/uapi/linux/virtio_ids.h  |   1 +
 include/uapi/linux/virtio_pmem.h |  10 +++
 7 files changed, 328 insertions(+)
 create mode 100644 drivers/nvdimm/nd_virtio.c
 create mode 100644 drivers/nvdimm/virtio_pmem.c
 create mode 100644 include/linux/virtio_pmem.h
 create mode 100644 include/uapi/linux/virtio_pmem.h
drivers/nvdimm/Makefile +1 -0
index 6f2a088afad6..cefe233e0b52 100644
@@ -5,6 +5,7 @@ obj-$(CONFIG_ND_BTT) += nd_btt.o
 obj-$(CONFIG_ND_BLK) += nd_blk.o
 obj-$(CONFIG_X86_PMEM_LEGACY) += nd_e820.o
 obj-$(CONFIG_OF_PMEM) += of_pmem.o
+obj-$(CONFIG_VIRTIO_PMEM) += virtio_pmem.o nd_virtio.o
 
 nd_pmem-y := pmem.o
 
drivers/nvdimm/nd_virtio.c new file +12 -0
new file mode 100644
index 000000000000..ed7ddcc5a62c
@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * virtio_pmem.c: Virtio pmem Driver
+ *
+ * Discovers persistent memory range information
+ * from host and provides a virtio based flushing
+ * interface.
+ */
+#include <linux/virtio_pmem.h>
+#include "nd.h"
+
+ /* The interrupt handler */
Quoted 8 lines

drivers/nvdimm/nd_virtio.c line 18

Quoted 6 lines
drivers/nvdimm/nd_virtio.c new file +6 -0
+void host_ack(struct virtqueue *vq)
+{
+	unsigned int len;
+	unsigned long flags;
+	struct virtio_pmem_request *req, *req_buf;
+	struct virtio_pmem *vpmem = vq->vdev->priv;

Nit: use reverse Christmas tree layout :)

o.k

Quoted 22 lines
Quoted 22 lines
drivers/nvdimm/nd_virtio.c new file +21 -0
+
+	spin_lock_irqsave(&vpmem->pmem_lock, flags);
+	while ((req = virtqueue_get_buf(vq, &len)) != NULL) {
+		req->done = true;
+		wake_up(&req->host_acked);
+
+		if (!list_empty(&vpmem->req_list)) {
+			req_buf = list_first_entry(&vpmem->req_list,
+					struct virtio_pmem_request, list);
+			req_buf->wq_buf_avail = true;
+			wake_up(&req_buf->wq_buf);
+			list_del(&req_buf->list);
+		}
+	}
+	spin_unlock_irqrestore(&vpmem->pmem_lock, flags);
+}
+EXPORT_SYMBOL_GPL(host_ack);
+
+ /* The request submission function */
+int virtio_pmem_flush(struct nd_region *nd_region)
+{
Quoted 8 lines

drivers/nvdimm/nd_virtio.c line 45

Quoted 6 lines
drivers/nvdimm/nd_virtio.c new file +6 -0
+	int err, err1;
+	unsigned long flags;
+	struct scatterlist *sgs[2], sg, ret;
+	struct virtio_device *vdev = nd_region->provider_data;
+	struct virtio_pmem *vpmem = vdev->priv;
+	struct virtio_pmem_request *req;

Nit: use reverse Christmas tree layout :)

o.k

Quoted 28 lines
Quoted 28 lines
drivers/nvdimm/nd_virtio.c new file +27 -0
+
+	might_sleep();
+	req = kmalloc(sizeof(*req), GFP_KERNEL);
+	if (!req)
+		return -ENOMEM;
+
+	req->done = false;
+	strcpy(req->name, "FLUSH");
+	init_waitqueue_head(&req->host_acked);
+	init_waitqueue_head(&req->wq_buf);
+	INIT_LIST_HEAD(&req->list);
+	sg_init_one(&sg, req->name, strlen(req->name));
+	sgs[0] = &sg;
+	sg_init_one(&ret, &req->ret, sizeof(req->ret));
+	sgs[1] = &ret;
+
+	spin_lock_irqsave(&vpmem->pmem_lock, flags);
+	 /*
+	  * If virtqueue_add_sgs returns -ENOSPC then req_vq virtual
+	  * queue does not have free descriptor. We add the request
+	  * to req_list and wait for host_ack to wake us up when free
+	  * slots are available.
+	  */
+	while ((err = virtqueue_add_sgs(vpmem->req_vq, sgs, 1, 1, req,
+					GFP_ATOMIC)) == -ENOSPC) {
+
+		dev_err(&vdev->dev, "failed to send command to virtio pmem"\
Quoted 8 lines

drivers/nvdimm/nd_virtio.c line 78

Quoted 6 lines
drivers/nvdimm/nd_virtio.c new file +6 -0
+			"device, no free slots in the virtqueue\n");
+		req->wq_buf_avail = false;
+		list_add_tail(&req->list, &vpmem->req_list);
+		spin_unlock_irqrestore(&vpmem->pmem_lock, flags);
+
+		/* When host has read buffer, this completes via host_ack */

"A host repsonse results in "host_ack" getting called" ... ?

o.k

Quoted 17 lines
Quoted 5 lines
drivers/nvdimm/nd_virtio.c new file +4 -0
+		wait_event(req->wq_buf, req->wq_buf_avail);
+		spin_lock_irqsave(&vpmem->pmem_lock, flags);
+	}
+	err1 = virtqueue_kick(vpmem->req_vq);

drivers/nvdimm/nd_virtio.c line 92

Quoted 10 lines
drivers/nvdimm/nd_virtio.c new file +10 -0
+	spin_unlock_irqrestore(&vpmem->pmem_lock, flags);
+
+	/*
+	 * virtqueue_add_sgs failed with error different than -ENOSPC, we can't
+	 * do anything about that.
+	 */
+	if (err || !err1) {
+		dev_info(&vdev->dev, "failed to send command to virtio pmem device\n");
+		err = -EIO;
+		goto ret;

Avoid the goto. Just move the following statements into an "else" case.

o.k

Quoted 35 lines

drivers/nvdimm/nd_virtio.c line 78

Quoted 4 lines
drivers/nvdimm/nd_virtio.c new file +3 -0
+	}
+
+	/* When host has read buffer, this completes via host_ack */

"A host repsonse results in "host_ack" getting called" ... ?

Quoted 15 lines
drivers/nvdimm/nd_virtio.c new file +15 -0
+	wait_event(req->host_acked, req->done);
+	err = req->ret;
+ret:
+	kfree(req);
+	return err;
+};
+
+/* The asynchronous flush callback function */
+int async_pmem_flush(struct nd_region *nd_region, struct bio *bio)
+{
+	int rc = 0;
+
+	/* Create child bio for asynchronous flush and chain with
+	 * parent bio. Otherwise directly call nd_region flush.
+	 */

drivers/nvdimm/nd_virtio.c line 120

Quoted 10 lines
drivers/nvdimm/nd_virtio.c new file +10 -0
+	if (bio && bio->bi_iter.bi_sector != -1) {
+		struct bio *child = bio_alloc(GFP_ATOMIC, 0);
+
+		if (!child)
+			return -ENOMEM;
+		bio_copy_dev(child, bio);
+		child->bi_opf = REQ_PREFLUSH;
+		child->bi_iter.bi_sector = -1;
+		bio_chain(child, bio);
+		submit_bio(child);

return 0;

Quoted 4 lines

Then, drop the "else" case and "int rc" and do directly

if (virtio_pmem_flush(nd_region))

	return -EIO;

and another 'return 0' here :)

I don't like return from multiple places instead I prefer single exit point from function.

Quoted 32 lines
Quoted 32 lines
drivers/nvdimm/nd_virtio.c new file +9 -0
+	} else {
+
+			rc = -EIO;
+	}
+
+	return rc;
+};
+EXPORT_SYMBOL_GPL(async_pmem_flush);
+MODULE_LICENSE("GPL");
drivers/nvdimm/virtio_pmem.c new file +16 -0
new file mode 100644
index 000000000000..cfc6381c4e5d
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * virtio_pmem.c: Virtio pmem Driver
+ *
+ * Discovers persistent memory range information
+ * from host and registers the virtual pmem device
+ * with libnvdimm core.
+ */
+#include <linux/virtio_pmem.h>
+#include "nd.h"
+
+static struct virtio_device_id id_table[] = {
+	{ VIRTIO_ID_PMEM, VIRTIO_DEV_ANY_ID },
+	{ 0 },
+};
+
Quoted 8 lines

drivers/nvdimm/virtio_pmem.c line 22

Quoted 6 lines
drivers/nvdimm/virtio_pmem.c new file +6 -0
+ /* Initialize virt queue */
+static int init_vq(struct virtio_pmem *vpmem)
+{
+	/* single vq */
+	vpmem->req_vq = virtio_find_single_vq(vpmem->vdev,
+				host_ack, "flush_queue");

Nit: Wrong indentation of parameters.

o.k

Quoted 9 lines

drivers/nvdimm/virtio_pmem.c line 27

Quoted 6 lines
drivers/nvdimm/virtio_pmem.c new file +5 -0
+	if (IS_ERR(vpmem->req_vq))
+		return PTR_ERR(vpmem->req_vq);
+
+	spin_lock_init(&vpmem->pmem_lock);
+	INIT_LIST_HEAD(&vpmem->req_list);

I would initialize the locks in the virtio_pmem_probe() directly, earlier (directly after allocating vpmem).

Since the lock is to protect the vq so logically I put it in 'init_vq' which is eventually called by probe.

Quoted 15 lines

drivers/nvdimm/virtio_pmem.c line 39

Quoted 13 lines
drivers/nvdimm/virtio_pmem.c new file +12 -0
+
+	return 0;
+};
+
+static int virtio_pmem_probe(struct virtio_device *vdev)
+{
+	int err = 0;
+	struct resource res;
+	struct virtio_pmem *vpmem;
+	struct nd_region_desc ndr_desc = {};
+	int nid = dev_to_node(&vdev->dev);
+	struct nd_region *nd_region;

Nit: use reverse Christmas tree layout :)

Done.

Quoted 38 lines
Quoted 38 lines
drivers/nvdimm/virtio_pmem.c new file +37 -0
+
+	if (!vdev->config->get) {
+		dev_err(&vdev->dev, "%s failure: config access disabled\n",
+			__func__);
+		return -EINVAL;
+	}
+
+	vpmem = devm_kzalloc(&vdev->dev, sizeof(*vpmem), GFP_KERNEL);
+	if (!vpmem) {
+		err = -ENOMEM;
+		goto out_err;
+	}
+
+	vpmem->vdev = vdev;
+	vdev->priv = vpmem;
+	err = init_vq(vpmem);
+	if (err)
+		goto out_err;
+
+	virtio_cread(vpmem->vdev, struct virtio_pmem_config,
+			start, &vpmem->start);
+	virtio_cread(vpmem->vdev, struct virtio_pmem_config,
+			size, &vpmem->size);
+
+	res.start = vpmem->start;
+	res.end   = vpmem->start + vpmem->size-1;
+	vpmem->nd_desc.provider_name = "virtio-pmem";
+	vpmem->nd_desc.module = THIS_MODULE;
+
+	vpmem->nvdimm_bus = nvdimm_bus_register(&vdev->dev,
+						&vpmem->nd_desc);
+	if (!vpmem->nvdimm_bus)
+		goto out_vq;
+
+	dev_set_drvdata(&vdev->dev, vpmem->nvdimm_bus);
+
+	ndr_desc.res = &res;
Quoted 8 lines

drivers/nvdimm/virtio_pmem.c line 82

Quoted 6 lines
drivers/nvdimm/virtio_pmem.c new file +6 -0
+	ndr_desc.numa_node = nid;
+	ndr_desc.flush = async_pmem_flush;
+	set_bit(ND_REGION_PAGEMAP, &ndr_desc.flags);
+	set_bit(ND_REGION_ASYNC, &ndr_desc.flags);
+	nd_region = nvdimm_pmem_region_create(vpmem->nvdimm_bus, &ndr_desc);
+

I'd drop this empty line.

hmm.

Quoted 7 lines

drivers/nvdimm/virtio_pmem.c line 85

Quoted 4 lines
drivers/nvdimm/virtio_pmem.c new file +3 -0
+	if (!nd_region)
+		goto out_nd;
+	nd_region->provider_data = dev_to_virtio(nd_region->dev.parent->parent);

Does it make sense to move some parts into separate functions for readability? E.g., virtio_pmem_init_nvdimm_bus()

I think this function only has initialization and don't have any complex logic.

Quoted 8 lines

drivers/nvdimm/virtio_pmem.c line 88

Quoted 4 lines
drivers/nvdimm/virtio_pmem.c new file +3 -0
+	return 0;
+out_nd:
+	err = -ENXIO;

I'd always initialize "err" along with the goto statement for readability, especially because ...

Quoted 4 lines

drivers/nvdimm/virtio_pmem.c line 90

Quoted 2 lines
drivers/nvdimm/virtio_pmem.c new file +2 -0
+	nvdimm_bus_unregister(vpmem->nvdimm_bus);
+out_vq:

... you don't initialize err in this case. Err is here 0 if I am not wrong.

Right. Changed.

Quoted 7 lines

drivers/nvdimm/virtio_pmem.c line 93

Quoted 4 lines
drivers/nvdimm/virtio_pmem.c new file +3 -0
+	vdev->config->del_vqs(vdev);
+out_err:
+	dev_err(&vdev->dev, "failed to register virtio pmem memory\n");

Should we try to give more meaning full messages? I can think of scenarios like "memory region is not properly aligned" or "out of memory".

o.k

Quoted 10 lines

drivers/nvdimm/virtio_pmem.c line 100

Quoted 8 lines
drivers/nvdimm/virtio_pmem.c new file +7 -0
+	return err;
+}
+
+static void virtio_pmem_remove(struct virtio_device *vdev)
+{
+	struct nvdimm_bus *nvdimm_bus = dev_get_drvdata(&vdev->dev);
+

Is the nd_region implicitly cleaned up?

yes. it will be.

Quoted 2 lines

You are not freeing "vdev->priv".

vdev->priv is vpmem which is allocated using devm API.

Quoted 26 lines
Quoted 26 lines
drivers/nvdimm/virtio_pmem.c new file +17 -0
+	nvdimm_bus_unregister(nvdimm_bus);
+	vdev->config->del_vqs(vdev);
+	vdev->config->reset(vdev);
+}
+
+static struct virtio_driver virtio_pmem_driver = {
+	.driver.name		= KBUILD_MODNAME,
+	.driver.owner		= THIS_MODULE,
+	.id_table		= id_table,
+	.probe			= virtio_pmem_probe,
+	.remove			= virtio_pmem_remove,
+};
+
+module_virtio_driver(virtio_pmem_driver);
+MODULE_DEVICE_TABLE(virtio, id_table);
+MODULE_DESCRIPTION("Virtio pmem driver");
+MODULE_LICENSE("GPL");
drivers/virtio/Kconfig +0 -0
index 35897649c24f..9f634a2ed638 100644
@@ -42,6 +42,16 @@ config VIRTIO_PCI_LEGACY
 
 	  If unsure, say Y.
 
Quoted 11 lines

drivers/virtio/Kconfig config VIRTIO_PCI_LEGACY · line 51

Quoted 7 lines
drivers/virtio/Kconfig +7 -0
+config VIRTIO_PMEM
+	tristate "Support for virtio pmem driver"
+	depends on VIRTIO
+	depends on LIBNVDIMM
+	help
+	This driver provides support for virtio based flushing interface
+	for persistent memory range.

"This driver provides access to virtio-pmem devices, storage devices that are mapped into the physical address space - similar to NVDIMMs - with a virtio-based flushing interface." ... ?

looks better. Incorporated.

Thanks,
Pankaj

Quoted 8 lines

drivers/virtio/Kconfig config VIRTIO_PCI_LEGACY · line 54

Quoted 4 lines
drivers/virtio/Kconfig +3 -0
+
+	If unsure, say M.
+

--

Quoted 4 lines

Thanks,

David / dhildenb

_______________________________________________
Linux-nvdimm mailing list
[email protected]
https://lists.01.org/mailman/listinfo/linux-nvdimm

#13 lore raw

Re: [PATCH v8 2/6] virtio-pmem: Add virtio pmem driver

Quoted 37 lines
Quoted 37 lines

drivers/nvdimm/nd_virtio.c line 78

Quoted 4 lines
drivers/nvdimm/nd_virtio.c new file +3 -0
+	}
+
+	/* When host has read buffer, this completes via host_ack */

"A host repsonse results in "host_ack" getting called" ... ?

Quoted 15 lines
drivers/nvdimm/nd_virtio.c new file +15 -0
+	wait_event(req->host_acked, req->done);
+	err = req->ret;
+ret:
+	kfree(req);
+	return err;
+};
+
+/* The asynchronous flush callback function */
+int async_pmem_flush(struct nd_region *nd_region, struct bio *bio)
+{
+	int rc = 0;
+
+	/* Create child bio for asynchronous flush and chain with
+	 * parent bio. Otherwise directly call nd_region flush.
+	 */

drivers/nvdimm/nd_virtio.c line 120

Quoted 10 lines
drivers/nvdimm/nd_virtio.c new file +10 -0
+	if (bio && bio->bi_iter.bi_sector != -1) {
+		struct bio *child = bio_alloc(GFP_ATOMIC, 0);
+
+		if (!child)
+			return -ENOMEM;
+		bio_copy_dev(child, bio);
+		child->bi_opf = REQ_PREFLUSH;
+		child->bi_iter.bi_sector = -1;
+		bio_chain(child, bio);
+		submit_bio(child);

return 0;

Then, drop the "else" case and "int rc" and do directly

Quoted 7 lines
Quoted 2 lines

if (virtio_pmem_flush(nd_region))

	return -EIO;

and another 'return 0' here :)

I don't like return from multiple places instead I prefer single exit point from function.

Makes this function more complicated than necessary. I agree when there are locks involved.

Quoted 66 lines
Quoted 16 lines
Quoted 4 lines
drivers/nvdimm/virtio_pmem.c new file +2 -0
+
+	return 0;

drivers/nvdimm/virtio_pmem.c line 39

Quoted 10 lines
drivers/nvdimm/virtio_pmem.c new file +10 -0
+};
+
+static int virtio_pmem_probe(struct virtio_device *vdev)
+{
+	int err = 0;
+	struct resource res;
+	struct virtio_pmem *vpmem;
+	struct nd_region_desc ndr_desc = {};
+	int nid = dev_to_node(&vdev->dev);
+	struct nd_region *nd_region;

Nit: use reverse Christmas tree layout :)

Done.

Quoted 38 lines
Quoted 38 lines
drivers/nvdimm/virtio_pmem.c new file +37 -0
+
+	if (!vdev->config->get) {
+		dev_err(&vdev->dev, "%s failure: config access disabled\n",
+			__func__);
+		return -EINVAL;
+	}
+
+	vpmem = devm_kzalloc(&vdev->dev, sizeof(*vpmem), GFP_KERNEL);
+	if (!vpmem) {
+		err = -ENOMEM;
+		goto out_err;
+	}
+
+	vpmem->vdev = vdev;
+	vdev->priv = vpmem;
+	err = init_vq(vpmem);
+	if (err)
+		goto out_err;
+
+	virtio_cread(vpmem->vdev, struct virtio_pmem_config,
+			start, &vpmem->start);
+	virtio_cread(vpmem->vdev, struct virtio_pmem_config,
+			size, &vpmem->size);
+
+	res.start = vpmem->start;
+	res.end   = vpmem->start + vpmem->size-1;
+	vpmem->nd_desc.provider_name = "virtio-pmem";
+	vpmem->nd_desc.module = THIS_MODULE;
+
+	vpmem->nvdimm_bus = nvdimm_bus_register(&vdev->dev,
+						&vpmem->nd_desc);
+	if (!vpmem->nvdimm_bus)
+		goto out_vq;
+
+	dev_set_drvdata(&vdev->dev, vpmem->nvdimm_bus);
+
+	ndr_desc.res = &res;
Quoted 8 lines

drivers/nvdimm/virtio_pmem.c line 82

Quoted 6 lines
drivers/nvdimm/virtio_pmem.c new file +6 -0
+	ndr_desc.numa_node = nid;
+	ndr_desc.flush = async_pmem_flush;
+	set_bit(ND_REGION_PAGEMAP, &ndr_desc.flags);
+	set_bit(ND_REGION_ASYNC, &ndr_desc.flags);
+	nd_region = nvdimm_pmem_region_create(vpmem->nvdimm_bus, &ndr_desc);
+

I'd drop this empty line.

Quoted 2 lines

hmm.

The common pattern after allocating something, immediately check for it in the next line (like you do throughout this patch ;) )

...

Quoted 3 lines
Quoted 1 line

You are not freeing "vdev->priv".

vdev->priv is vpmem which is allocated using devm API.

I'm confused. Looking at drivers/virtio/virtio_balloon.c:

static void virtballoon_remove(struct virtio_device *vdev)

{
	struct virtio_balloon *vb = vdev->priv;

	...

	kfree(vb);
}

I think you should do the same here, vdev->priv is allocated in virtio_pmem_probe.

But maybe I am missing something important here :)

Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
drivers/nvdimm/virtio_pmem.c new file +5 -0
+	nvdimm_bus_unregister(nvdimm_bus);
+	vdev->config->del_vqs(vdev);
+	vdev->config->reset(vdev);
+}
+
Signature · 3 lines
Thanks,

David / dhildenb
#14 lore raw

Re: [PATCH v8 2/6] virtio-pmem: Add virtio pmem driver

In reply to Pankaj Gupta
Quoted 37 lines
Quoted 37 lines

drivers/nvdimm/nd_virtio.c line 78

Quoted 4 lines
drivers/nvdimm/nd_virtio.c new file +3 -0
+	}
+
+	/* When host has read buffer, this completes via host_ack */

"A host repsonse results in "host_ack" getting called" ... ?

Quoted 15 lines
drivers/nvdimm/nd_virtio.c new file +15 -0
+	wait_event(req->host_acked, req->done);
+	err = req->ret;
+ret:
+	kfree(req);
+	return err;
+};
+
+/* The asynchronous flush callback function */
+int async_pmem_flush(struct nd_region *nd_region, struct bio *bio)
+{
+	int rc = 0;
+
+	/* Create child bio for asynchronous flush and chain with
+	 * parent bio. Otherwise directly call nd_region flush.
+	 */

drivers/nvdimm/nd_virtio.c line 120

Quoted 10 lines
drivers/nvdimm/nd_virtio.c new file +10 -0
+	if (bio && bio->bi_iter.bi_sector != -1) {
+		struct bio *child = bio_alloc(GFP_ATOMIC, 0);
+
+		if (!child)
+			return -ENOMEM;
+		bio_copy_dev(child, bio);
+		child->bi_opf = REQ_PREFLUSH;
+		child->bi_iter.bi_sector = -1;
+		bio_chain(child, bio);
+		submit_bio(child);

return 0;

Then, drop the "else" case and "int rc" and do directly

Quoted 7 lines
Quoted 2 lines

if (virtio_pmem_flush(nd_region))

	return -EIO;

and another 'return 0' here :)

I don't like return from multiple places instead I prefer single exit point from function.

Makes this function more complicated than necessary. I agree when there are locks involved.

Quoted 66 lines
Quoted 16 lines
Quoted 4 lines
drivers/nvdimm/virtio_pmem.c new file +2 -0
+
+	return 0;

drivers/nvdimm/virtio_pmem.c line 39

Quoted 10 lines
drivers/nvdimm/virtio_pmem.c new file +10 -0
+};
+
+static int virtio_pmem_probe(struct virtio_device *vdev)
+{
+	int err = 0;
+	struct resource res;
+	struct virtio_pmem *vpmem;
+	struct nd_region_desc ndr_desc = {};
+	int nid = dev_to_node(&vdev->dev);
+	struct nd_region *nd_region;

Nit: use reverse Christmas tree layout :)

Done.

Quoted 38 lines
Quoted 38 lines
drivers/nvdimm/virtio_pmem.c new file +37 -0
+
+	if (!vdev->config->get) {
+		dev_err(&vdev->dev, "%s failure: config access disabled\n",
+			__func__);
+		return -EINVAL;
+	}
+
+	vpmem = devm_kzalloc(&vdev->dev, sizeof(*vpmem), GFP_KERNEL);
+	if (!vpmem) {
+		err = -ENOMEM;
+		goto out_err;
+	}
+
+	vpmem->vdev = vdev;
+	vdev->priv = vpmem;
+	err = init_vq(vpmem);
+	if (err)
+		goto out_err;
+
+	virtio_cread(vpmem->vdev, struct virtio_pmem_config,
+			start, &vpmem->start);
+	virtio_cread(vpmem->vdev, struct virtio_pmem_config,
+			size, &vpmem->size);
+
+	res.start = vpmem->start;
+	res.end   = vpmem->start + vpmem->size-1;
+	vpmem->nd_desc.provider_name = "virtio-pmem";
+	vpmem->nd_desc.module = THIS_MODULE;
+
+	vpmem->nvdimm_bus = nvdimm_bus_register(&vdev->dev,
+						&vpmem->nd_desc);
+	if (!vpmem->nvdimm_bus)
+		goto out_vq;
+
+	dev_set_drvdata(&vdev->dev, vpmem->nvdimm_bus);
+
+	ndr_desc.res = &res;
Quoted 8 lines

drivers/nvdimm/virtio_pmem.c line 82

Quoted 6 lines
drivers/nvdimm/virtio_pmem.c new file +6 -0
+	ndr_desc.numa_node = nid;
+	ndr_desc.flush = async_pmem_flush;
+	set_bit(ND_REGION_PAGEMAP, &ndr_desc.flags);
+	set_bit(ND_REGION_ASYNC, &ndr_desc.flags);
+	nd_region = nvdimm_pmem_region_create(vpmem->nvdimm_bus, &ndr_desc);
+

I'd drop this empty line.

Quoted 2 lines

hmm.

The common pattern after allocating something, immediately check for it in the next line (like you do throughout this patch ;) )

...

Quoted 3 lines
Quoted 1 line

You are not freeing "vdev->priv".

vdev->priv is vpmem which is allocated using devm API.

I'm confused. Looking at drivers/virtio/virtio_balloon.c:

static void virtballoon_remove(struct virtio_device *vdev)

{
	struct virtio_balloon *vb = vdev->priv;

	...

	kfree(vb);
}

I think you should do the same here, vdev->priv is allocated in virtio_pmem_probe.

But maybe I am missing something important here :)

Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
drivers/nvdimm/virtio_pmem.c new file +5 -0
+	nvdimm_bus_unregister(nvdimm_bus);
+	vdev->config->del_vqs(vdev);
+	vdev->config->reset(vdev);
+}
+
Signature · 7 lines
Thanks,

David / dhildenb
_______________________________________________
Linux-nvdimm mailing list
[email protected]
https://lists.01.org/mailman/listinfo/linux-nvdimm
#15 lore raw

Re: [PATCH v8 2/6] virtio-pmem: Add virtio pmem driver

Quoted 42 lines
Quoted 42 lines
Quoted 41 lines

drivers/nvdimm/nd_virtio.c line 78

Quoted 6 lines
drivers/nvdimm/nd_virtio.c new file +3 -0
+	}
+
+	/* When host has read buffer, this completes via host_ack */

"A host repsonse results in "host_ack" getting called" ... ?

Quoted 15 lines
drivers/nvdimm/nd_virtio.c new file +15 -0
+	wait_event(req->host_acked, req->done);
+	err = req->ret;
+ret:
+	kfree(req);
+	return err;
+};
+
+/* The asynchronous flush callback function */
+int async_pmem_flush(struct nd_region *nd_region, struct bio *bio)
+{
+	int rc = 0;
+
+	/* Create child bio for asynchronous flush and chain with
+	 * parent bio. Otherwise directly call nd_region flush.
+	 */

drivers/nvdimm/nd_virtio.c line 120

Quoted 10 lines
drivers/nvdimm/nd_virtio.c new file +10 -0
+	if (bio && bio->bi_iter.bi_sector != -1) {
+		struct bio *child = bio_alloc(GFP_ATOMIC, 0);
+
+		if (!child)
+			return -ENOMEM;
+		bio_copy_dev(child, bio);
+		child->bi_opf = REQ_PREFLUSH;
+		child->bi_iter.bi_sector = -1;
+		bio_chain(child, bio);
+		submit_bio(child);

return 0;

Then, drop the "else" case and "int rc" and do directly

if (virtio_pmem_flush(nd_region))

	return -EIO;
Quoted 7 lines
Quoted 4 lines

and another 'return 0' here :)

I don't like return from multiple places instead I prefer single exit point from function.

Makes this function more complicated than necessary. I agree when there are locks involved.

o.k. I will change as you suggest :)

Quoted 67 lines
Quoted 67 lines
Quoted 17 lines
Quoted 5 lines
drivers/nvdimm/virtio_pmem.c new file +2 -0
+
+	return 0;

drivers/nvdimm/virtio_pmem.c line 39

Quoted 10 lines
drivers/nvdimm/virtio_pmem.c new file +10 -0
+};
+
+static int virtio_pmem_probe(struct virtio_device *vdev)
+{
+	int err = 0;
+	struct resource res;
+	struct virtio_pmem *vpmem;
+	struct nd_region_desc ndr_desc = {};
+	int nid = dev_to_node(&vdev->dev);
+	struct nd_region *nd_region;

Nit: use reverse Christmas tree layout :)

Done.

Quoted 46 lines
Quoted 34 lines
drivers/nvdimm/virtio_pmem.c new file +33 -0
+
+	if (!vdev->config->get) {
+		dev_err(&vdev->dev, "%s failure: config access disabled\n",
+			__func__);
+		return -EINVAL;
+	}
+
+	vpmem = devm_kzalloc(&vdev->dev, sizeof(*vpmem), GFP_KERNEL);
+	if (!vpmem) {
+		err = -ENOMEM;
+		goto out_err;
+	}
+
+	vpmem->vdev = vdev;
+	vdev->priv = vpmem;
+	err = init_vq(vpmem);
+	if (err)
+		goto out_err;
+
+	virtio_cread(vpmem->vdev, struct virtio_pmem_config,
+			start, &vpmem->start);
+	virtio_cread(vpmem->vdev, struct virtio_pmem_config,
+			size, &vpmem->size);
+
+	res.start = vpmem->start;
+	res.end   = vpmem->start + vpmem->size-1;
+	vpmem->nd_desc.provider_name = "virtio-pmem";
+	vpmem->nd_desc.module = THIS_MODULE;
+
+	vpmem->nvdimm_bus = nvdimm_bus_register(&vdev->dev,
+						&vpmem->nd_desc);
+	if (!vpmem->nvdimm_bus)
+		goto out_vq;

drivers/nvdimm/virtio_pmem.c line 82

Quoted 10 lines
drivers/nvdimm/virtio_pmem.c new file +10 -0
+
+	dev_set_drvdata(&vdev->dev, vpmem->nvdimm_bus);
+
+	ndr_desc.res = &res;
+	ndr_desc.numa_node = nid;
+	ndr_desc.flush = async_pmem_flush;
+	set_bit(ND_REGION_PAGEMAP, &ndr_desc.flags);
+	set_bit(ND_REGION_ASYNC, &ndr_desc.flags);
+	nd_region = nvdimm_pmem_region_create(vpmem->nvdimm_bus, &ndr_desc);
+

I'd drop this empty line.

Quoted 5 lines
Quoted 2 lines

hmm.

The common pattern after allocating something, immediately check for it in the next line (like you do throughout this patch ;) )

Right. But rare times when I see space will beauty the code I tend to add it. Maybe I should not :)

Quoted 17 lines

...

Quoted 3 lines
Quoted 1 line

You are not freeing "vdev->priv".

vdev->priv is vpmem which is allocated using devm API.

I'm confused. Looking at drivers/virtio/virtio_balloon.c:

static void virtballoon_remove(struct virtio_device *vdev)

{
	struct virtio_balloon *vb = vdev->priv;

	...

	kfree(vb);
}
Quoted 4 lines

I think you should do the same here, vdev->priv is allocated in virtio_pmem_probe.

But maybe I am missing something important here :)

Because virtio_balloon use "kzalloc" for allocation and needs to be freed. But virtio pmem uses "devm_kzalloc" which takes care of automatically deleting the device memory when associated device is detached.

Thanks,
Pankaj

Quoted 14 lines
Quoted 7 lines
Quoted 7 lines

drivers/nvdimm/virtio_pmem.c line 105

Quoted 7 lines
drivers/nvdimm/virtio_pmem.c new file +5 -0
+	nvdimm_bus_unregister(nvdimm_bus);
+	vdev->config->del_vqs(vdev);
+	vdev->config->reset(vdev);
+}
+

--

Thanks,

David / dhildenb

#16 lore raw

Re: [PATCH v8 2/6] virtio-pmem: Add virtio pmem driver

In reply to David Hildenbrand
Quoted 42 lines
Quoted 42 lines
Quoted 41 lines

drivers/nvdimm/nd_virtio.c line 78

Quoted 6 lines
drivers/nvdimm/nd_virtio.c new file +3 -0
+	}
+
+	/* When host has read buffer, this completes via host_ack */

"A host repsonse results in "host_ack" getting called" ... ?

Quoted 15 lines
drivers/nvdimm/nd_virtio.c new file +15 -0
+	wait_event(req->host_acked, req->done);
+	err = req->ret;
+ret:
+	kfree(req);
+	return err;
+};
+
+/* The asynchronous flush callback function */
+int async_pmem_flush(struct nd_region *nd_region, struct bio *bio)
+{
+	int rc = 0;
+
+	/* Create child bio for asynchronous flush and chain with
+	 * parent bio. Otherwise directly call nd_region flush.
+	 */

drivers/nvdimm/nd_virtio.c line 120

Quoted 10 lines
drivers/nvdimm/nd_virtio.c new file +10 -0
+	if (bio && bio->bi_iter.bi_sector != -1) {
+		struct bio *child = bio_alloc(GFP_ATOMIC, 0);
+
+		if (!child)
+			return -ENOMEM;
+		bio_copy_dev(child, bio);
+		child->bi_opf = REQ_PREFLUSH;
+		child->bi_iter.bi_sector = -1;
+		bio_chain(child, bio);
+		submit_bio(child);

return 0;

Then, drop the "else" case and "int rc" and do directly

if (virtio_pmem_flush(nd_region))

	return -EIO;
Quoted 7 lines
Quoted 4 lines

and another 'return 0' here :)

I don't like return from multiple places instead I prefer single exit point from function.

Makes this function more complicated than necessary. I agree when there are locks involved.

o.k. I will change as you suggest :)

Quoted 67 lines
Quoted 67 lines
Quoted 17 lines
Quoted 5 lines
drivers/nvdimm/virtio_pmem.c new file +2 -0
+
+	return 0;

drivers/nvdimm/virtio_pmem.c line 39

Quoted 10 lines
drivers/nvdimm/virtio_pmem.c new file +10 -0
+};
+
+static int virtio_pmem_probe(struct virtio_device *vdev)
+{
+	int err = 0;
+	struct resource res;
+	struct virtio_pmem *vpmem;
+	struct nd_region_desc ndr_desc = {};
+	int nid = dev_to_node(&vdev->dev);
+	struct nd_region *nd_region;

Nit: use reverse Christmas tree layout :)

Done.

Quoted 46 lines
Quoted 34 lines
drivers/nvdimm/virtio_pmem.c new file +33 -0
+
+	if (!vdev->config->get) {
+		dev_err(&vdev->dev, "%s failure: config access disabled\n",
+			__func__);
+		return -EINVAL;
+	}
+
+	vpmem = devm_kzalloc(&vdev->dev, sizeof(*vpmem), GFP_KERNEL);
+	if (!vpmem) {
+		err = -ENOMEM;
+		goto out_err;
+	}
+
+	vpmem->vdev = vdev;
+	vdev->priv = vpmem;
+	err = init_vq(vpmem);
+	if (err)
+		goto out_err;
+
+	virtio_cread(vpmem->vdev, struct virtio_pmem_config,
+			start, &vpmem->start);
+	virtio_cread(vpmem->vdev, struct virtio_pmem_config,
+			size, &vpmem->size);
+
+	res.start = vpmem->start;
+	res.end   = vpmem->start + vpmem->size-1;
+	vpmem->nd_desc.provider_name = "virtio-pmem";
+	vpmem->nd_desc.module = THIS_MODULE;
+
+	vpmem->nvdimm_bus = nvdimm_bus_register(&vdev->dev,
+						&vpmem->nd_desc);
+	if (!vpmem->nvdimm_bus)
+		goto out_vq;

drivers/nvdimm/virtio_pmem.c line 82

Quoted 10 lines
drivers/nvdimm/virtio_pmem.c new file +10 -0
+
+	dev_set_drvdata(&vdev->dev, vpmem->nvdimm_bus);
+
+	ndr_desc.res = &res;
+	ndr_desc.numa_node = nid;
+	ndr_desc.flush = async_pmem_flush;
+	set_bit(ND_REGION_PAGEMAP, &ndr_desc.flags);
+	set_bit(ND_REGION_ASYNC, &ndr_desc.flags);
+	nd_region = nvdimm_pmem_region_create(vpmem->nvdimm_bus, &ndr_desc);
+

I'd drop this empty line.

Quoted 5 lines
Quoted 2 lines

hmm.

The common pattern after allocating something, immediately check for it in the next line (like you do throughout this patch ;) )

Right. But rare times when I see space will beauty the code I tend to add it. Maybe I should not :)

Quoted 17 lines

...

Quoted 3 lines
Quoted 1 line

You are not freeing "vdev->priv".

vdev->priv is vpmem which is allocated using devm API.

I'm confused. Looking at drivers/virtio/virtio_balloon.c:

static void virtballoon_remove(struct virtio_device *vdev)

{
	struct virtio_balloon *vb = vdev->priv;

	...

	kfree(vb);
}
Quoted 4 lines

I think you should do the same here, vdev->priv is allocated in virtio_pmem_probe.

But maybe I am missing something important here :)

Because virtio_balloon use "kzalloc" for allocation and needs to be freed. But virtio pmem uses "devm_kzalloc" which takes care of automatically deleting the device memory when associated device is detached.

Thanks,
Pankaj

Quoted 10 lines
Quoted 7 lines
Quoted 7 lines

drivers/nvdimm/virtio_pmem.c line 105

Quoted 7 lines
drivers/nvdimm/virtio_pmem.c new file +5 -0
+	nvdimm_bus_unregister(nvdimm_bus);
+	vdev->config->del_vqs(vdev);
+	vdev->config->reset(vdev);
+}
+

--

Quoted 4 lines

Thanks,

David / dhildenb

_______________________________________________
Linux-nvdimm mailing list
[email protected]
https://lists.01.org/mailman/listinfo/linux-nvdimm

#17 lore raw

Re: [PATCH v8 2/6] virtio-pmem: Add virtio pmem driver

Quoted 9 lines
Quoted 5 lines

I think you should do the same here, vdev->priv is allocated in virtio_pmem_probe.

But maybe I am missing something important here :)

Because virtio_balloon use "kzalloc" for allocation and needs to be freed. But virtio pmem uses "devm_kzalloc" which takes care of automatically deleting the device memory when associated device is detached.

Hehe, thanks, that was the part that I was missing!

Signature · 3 lines
Thanks,

David / dhildenb
#18 lore raw

Re: [PATCH v8 2/6] virtio-pmem: Add virtio pmem driver

In reply to Pankaj Gupta
Quoted 9 lines
Quoted 5 lines

I think you should do the same here, vdev->priv is allocated in virtio_pmem_probe.

But maybe I am missing something important here :)

Because virtio_balloon use "kzalloc" for allocation and needs to be freed. But virtio pmem uses "devm_kzalloc" which takes care of automatically deleting the device memory when associated device is detached.

Hehe, thanks, that was the part that I was missing!

Signature · 7 lines
Thanks,

David / dhildenb
_______________________________________________
Linux-nvdimm mailing list
[email protected]
https://lists.01.org/mailman/listinfo/linux-nvdimm
#19 lore raw

Re: [PATCH v8 2/6] virtio-pmem: Add virtio pmem driver

Quoted 5 lines
Quoted 5 lines
Quoted 5 lines

I think you should do the same here, vdev->priv is allocated in virtio_pmem_probe.

Quoted 8 lines
Quoted 6 lines
Quoted 1 line

But maybe I am missing something important here :)

Because virtio_balloon use "kzalloc" for allocation and needs to be freed. But virtio pmem uses "devm_kzalloc" which takes care of automatically deleting
the device memory when associated device is detached.

Hehe, thanks, that was the part that I was missing!

Thank you for the review.

Best regards,
Pankaj

Quoted 7 lines

--

Thanks,

David / dhildenb

#20 lore raw

Re: [PATCH v8 2/6] virtio-pmem: Add virtio pmem driver

In reply to David Hildenbrand
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines

I think you should do the same here, vdev->priv is allocated in virtio_pmem_probe.

Quoted 8 lines
Quoted 6 lines
Quoted 1 line

But maybe I am missing something important here :)

Because virtio_balloon use "kzalloc" for allocation and needs to be freed. But virtio pmem uses "devm_kzalloc" which takes care of automatically deleting
the device memory when associated device is detached.

Hehe, thanks, that was the part that I was missing!

Thank you for the review.

Best regards,
Pankaj

Quoted 7 lines

--

Thanks,

David / dhildenb

#21 lore raw

PATCH v8 3/6 libnvdimm: add dax_dev sync flag

In reply to Pankaj Gupta

This patch adds 'DAXDEV_SYNC' flag which is set for nd_region doing synchronous flush. This later is used to disable MAP_SYNC functionality for ext4 & xfs filesystem for devices don't support synchronous flush.

---
 drivers/dax/bus.c            |  2 +-
 drivers/dax/super.c          | 13 ++++++++++++-
 drivers/md/dm.c              |  3 ++-
 drivers/nvdimm/pmem.c        |  5 ++++-
 drivers/nvdimm/region_devs.c |  7 +++++++
 include/linux/dax.h          |  8 ++++++--
 include/linux/libnvdimm.h    |  1 +
 7 files changed, 33 insertions(+), 6 deletions(-)
drivers/dax/bus.c +1 -1
index 2109cfe80219..5f184e751c82 100644
@@ -388,7 +388,7 @@ struct dev_dax *__devm_create_dev_dax(struct dax_region *dax_region, int id,
 	 * No 'host' or dax_operations since there is no access to this
 	 * device outside of mmap of the resulting character device.
 	 */
-	dax_dev = alloc_dax(dev_dax, NULL, NULL);
+	dax_dev = alloc_dax(dev_dax, NULL, NULL, DAXDEV_F_SYNC);
 	if (!dax_dev)
 		goto err;
 
drivers/dax/super.c +12 -1
index bbd57ca0634a..b6c44b5062e9 100644
@@ -186,6 +186,8 @@ enum dax_device_flags {
 	DAXDEV_ALIVE,
 	/* gate whether dax_flush() calls the low level flush routine */
 	DAXDEV_WRITE_CACHE,
+	/* flag to check if device supports synchronous flush */
+	DAXDEV_SYNC,
 };
 
 /**
@@ -354,6 +356,12 @@ bool dax_write_cache_enabled(struct dax_device *dax_dev)
 }
 EXPORT_SYMBOL_GPL(dax_write_cache_enabled);
 
+bool dax_synchronous(struct dax_device *dax_dev)
+{
+	return test_bit(DAXDEV_SYNC, &dax_dev->flags);
+}
+EXPORT_SYMBOL_GPL(dax_synchronous);
+
 bool dax_alive(struct dax_device *dax_dev)
 {
 	lockdep_assert_held(&dax_srcu);
@@ -508,7 +516,7 @@ static void dax_add_host(struct dax_device *dax_dev, const char *host)
 }
 
 struct dax_device *alloc_dax(void *private, const char *__host,
-		const struct dax_operations *ops)
+		const struct dax_operations *ops, unsigned long flags)
 {
 	struct dax_device *dax_dev;
 	const char *host;
@@ -531,6 +539,9 @@ struct dax_device *alloc_dax(void *private, const char *__host,
 	dax_add_host(dax_dev, host);
 	dax_dev->ops = ops;
 	dax_dev->private = private;
+	if (flags & DAXDEV_F_SYNC)
+		set_bit(DAXDEV_SYNC, &dax_dev->flags);
+
 	return dax_dev;
 
  err_dev:
drivers/md/dm.c +2 -1
index 043f0761e4a0..ee007b75d9fd 100644
@@ -1969,7 +1969,8 @@ static struct mapped_device *alloc_dev(int minor)
 	sprintf(md->disk->disk_name, "dm-%d", minor);
 
 	if (IS_ENABLED(CONFIG_DAX_DRIVER)) {
-		dax_dev = alloc_dax(md, md->disk->disk_name, &dm_dax_ops);
+		dax_dev = alloc_dax(md, md->disk->disk_name, &dm_dax_ops,
+							 DAXDEV_F_SYNC);
 		if (!dax_dev)
 			goto bad;
 	}
drivers/nvdimm/pmem.c +4 -1
index 0279eb1da3ef..bdbd2b414d3d 100644
@@ -365,6 +365,7 @@ static int pmem_attach_disk(struct device *dev,
 	struct gendisk *disk;
 	void *addr;
 	int rc;
+	unsigned long flags = 0UL;
 
 	pmem = devm_kzalloc(dev, sizeof(*pmem), GFP_KERNEL);
 	if (!pmem)
@@ -462,7 +463,9 @@ static int pmem_attach_disk(struct device *dev,
 	nvdimm_badblocks_populate(nd_region, &pmem->bb, &bb_res);
 	disk->bb = &pmem->bb;
 
-	dax_dev = alloc_dax(pmem, disk->disk_name, &pmem_dax_ops);
+	if (is_nvdimm_sync(nd_region))
+		flags = DAXDEV_F_SYNC;
+	dax_dev = alloc_dax(pmem, disk->disk_name, &pmem_dax_ops, flags);
 	if (!dax_dev) {
 		put_disk(disk);
 		return -ENOMEM;
drivers/nvdimm/region_devs.c +7 -0
index b4ef7d9ff22e..f3ea5369d20a 100644
@@ -1197,6 +1197,13 @@ int nvdimm_has_cache(struct nd_region *nd_region)
 }
 EXPORT_SYMBOL_GPL(nvdimm_has_cache);
 
+bool is_nvdimm_sync(struct nd_region *nd_region)
+{
+	return is_nd_pmem(&nd_region->dev) &&
+		!test_bit(ND_REGION_ASYNC, &nd_region->flags);
+}
+EXPORT_SYMBOL_GPL(is_nvdimm_sync);
+
 struct conflict_context {
 	struct nd_region *nd_region;
 	resource_size_t start, size;
include/linux/dax.h +6 -2
index 0dd316a74a29..ed75b7d9d178 100644
@@ -7,6 +7,9 @@
 #include <linux/radix-tree.h>
 #include <asm/pgtable.h>
 
+/* Flag for synchronous flush */
+#define DAXDEV_F_SYNC (1UL << 0)
+
 typedef unsigned long dax_entry_t;
 
 struct iomap_ops;
@@ -32,18 +35,19 @@ extern struct attribute_group dax_attribute_group;
 #if IS_ENABLED(CONFIG_DAX)
 struct dax_device *dax_get_by_host(const char *host);
 struct dax_device *alloc_dax(void *private, const char *host,
-		const struct dax_operations *ops);
+		const struct dax_operations *ops, unsigned long flags);
 void put_dax(struct dax_device *dax_dev);
 void kill_dax(struct dax_device *dax_dev);
 void dax_write_cache(struct dax_device *dax_dev, bool wc);
 bool dax_write_cache_enabled(struct dax_device *dax_dev);
+bool dax_synchronous(struct dax_device *dax_dev);
 #else
 static inline struct dax_device *dax_get_by_host(const char *host)
 {
 	return NULL;
 }
 static inline struct dax_device *alloc_dax(void *private, const char *host,
-		const struct dax_operations *ops)
+		const struct dax_operations *ops, unsigned long flags)
 {
 	/*
 	 * Callers should check IS_ENABLED(CONFIG_DAX) to know if this
include/linux/libnvdimm.h +1 -0
index feb342d026f2..3238a206e563 100644
@@ -264,6 +264,7 @@ void nvdimm_flush(struct nd_region *nd_region);
 int nvdimm_has_flush(struct nd_region *nd_region);
 int nvdimm_has_cache(struct nd_region *nd_region);
 int nvdimm_in_overwrite(struct nvdimm *nvdimm);
+bool is_nvdimm_sync(struct nd_region *nd_region);
 
 static inline int nvdimm_ctl(struct nvdimm *nvdimm, unsigned int cmd, void *buf,
 		unsigned int buf_len, int *cmd_rc)
Signature · 1 line
2.20.1
#22 lore raw

PATCH v8 3/6 libnvdimm: add dax_dev sync flag

In reply to Pankaj Gupta

This patch adds 'DAXDEV_SYNC' flag which is set for nd_region doing synchronous flush. This later is used to disable MAP_SYNC functionality for ext4 & xfs filesystem for devices don't support synchronous flush.

---
 drivers/dax/bus.c            |  2 +-
 drivers/dax/super.c          | 13 ++++++++++++-
 drivers/md/dm.c              |  3 ++-
 drivers/nvdimm/pmem.c        |  5 ++++-
 drivers/nvdimm/region_devs.c |  7 +++++++
 include/linux/dax.h          |  8 ++++++--
 include/linux/libnvdimm.h    |  1 +
 7 files changed, 33 insertions(+), 6 deletions(-)
drivers/dax/bus.c +1 -1
index 2109cfe80219..5f184e751c82 100644
@@ -388,7 +388,7 @@ struct dev_dax *__devm_create_dev_dax(struct dax_region *dax_region, int id,
 	 * No 'host' or dax_operations since there is no access to this
 	 * device outside of mmap of the resulting character device.
 	 */
-	dax_dev = alloc_dax(dev_dax, NULL, NULL);
+	dax_dev = alloc_dax(dev_dax, NULL, NULL, DAXDEV_F_SYNC);
 	if (!dax_dev)
 		goto err;
 
drivers/dax/super.c +12 -1
index bbd57ca0634a..b6c44b5062e9 100644
@@ -186,6 +186,8 @@ enum dax_device_flags {
 	DAXDEV_ALIVE,
 	/* gate whether dax_flush() calls the low level flush routine */
 	DAXDEV_WRITE_CACHE,
+	/* flag to check if device supports synchronous flush */
+	DAXDEV_SYNC,
 };
 
 /**
@@ -354,6 +356,12 @@ bool dax_write_cache_enabled(struct dax_device *dax_dev)
 }
 EXPORT_SYMBOL_GPL(dax_write_cache_enabled);
 
+bool dax_synchronous(struct dax_device *dax_dev)
+{
+	return test_bit(DAXDEV_SYNC, &dax_dev->flags);
+}
+EXPORT_SYMBOL_GPL(dax_synchronous);
+
 bool dax_alive(struct dax_device *dax_dev)
 {
 	lockdep_assert_held(&dax_srcu);
@@ -508,7 +516,7 @@ static void dax_add_host(struct dax_device *dax_dev, const char *host)
 }
 
 struct dax_device *alloc_dax(void *private, const char *__host,
-		const struct dax_operations *ops)
+		const struct dax_operations *ops, unsigned long flags)
 {
 	struct dax_device *dax_dev;
 	const char *host;
@@ -531,6 +539,9 @@ struct dax_device *alloc_dax(void *private, const char *__host,
 	dax_add_host(dax_dev, host);
 	dax_dev->ops = ops;
 	dax_dev->private = private;
+	if (flags & DAXDEV_F_SYNC)
+		set_bit(DAXDEV_SYNC, &dax_dev->flags);
+
 	return dax_dev;
 
  err_dev:
drivers/md/dm.c +2 -1
index 043f0761e4a0..ee007b75d9fd 100644
@@ -1969,7 +1969,8 @@ static struct mapped_device *alloc_dev(int minor)
 	sprintf(md->disk->disk_name, "dm-%d", minor);
 
 	if (IS_ENABLED(CONFIG_DAX_DRIVER)) {
-		dax_dev = alloc_dax(md, md->disk->disk_name, &dm_dax_ops);
+		dax_dev = alloc_dax(md, md->disk->disk_name, &dm_dax_ops,
+							 DAXDEV_F_SYNC);
 		if (!dax_dev)
 			goto bad;
 	}
drivers/nvdimm/pmem.c +4 -1
index 0279eb1da3ef..bdbd2b414d3d 100644
@@ -365,6 +365,7 @@ static int pmem_attach_disk(struct device *dev,
 	struct gendisk *disk;
 	void *addr;
 	int rc;
+	unsigned long flags = 0UL;
 
 	pmem = devm_kzalloc(dev, sizeof(*pmem), GFP_KERNEL);
 	if (!pmem)
@@ -462,7 +463,9 @@ static int pmem_attach_disk(struct device *dev,
 	nvdimm_badblocks_populate(nd_region, &pmem->bb, &bb_res);
 	disk->bb = &pmem->bb;
 
-	dax_dev = alloc_dax(pmem, disk->disk_name, &pmem_dax_ops);
+	if (is_nvdimm_sync(nd_region))
+		flags = DAXDEV_F_SYNC;
+	dax_dev = alloc_dax(pmem, disk->disk_name, &pmem_dax_ops, flags);
 	if (!dax_dev) {
 		put_disk(disk);
 		return -ENOMEM;
drivers/nvdimm/region_devs.c +7 -0
index b4ef7d9ff22e..f3ea5369d20a 100644
@@ -1197,6 +1197,13 @@ int nvdimm_has_cache(struct nd_region *nd_region)
 }
 EXPORT_SYMBOL_GPL(nvdimm_has_cache);
 
+bool is_nvdimm_sync(struct nd_region *nd_region)
+{
+	return is_nd_pmem(&nd_region->dev) &&
+		!test_bit(ND_REGION_ASYNC, &nd_region->flags);
+}
+EXPORT_SYMBOL_GPL(is_nvdimm_sync);
+
 struct conflict_context {
 	struct nd_region *nd_region;
 	resource_size_t start, size;
include/linux/dax.h +6 -2
index 0dd316a74a29..ed75b7d9d178 100644
@@ -7,6 +7,9 @@
 #include <linux/radix-tree.h>
 #include <asm/pgtable.h>
 
+/* Flag for synchronous flush */
+#define DAXDEV_F_SYNC (1UL << 0)
+
 typedef unsigned long dax_entry_t;
 
 struct iomap_ops;
@@ -32,18 +35,19 @@ extern struct attribute_group dax_attribute_group;
 #if IS_ENABLED(CONFIG_DAX)
 struct dax_device *dax_get_by_host(const char *host);
 struct dax_device *alloc_dax(void *private, const char *host,
-		const struct dax_operations *ops);
+		const struct dax_operations *ops, unsigned long flags);
 void put_dax(struct dax_device *dax_dev);
 void kill_dax(struct dax_device *dax_dev);
 void dax_write_cache(struct dax_device *dax_dev, bool wc);
 bool dax_write_cache_enabled(struct dax_device *dax_dev);
+bool dax_synchronous(struct dax_device *dax_dev);
 #else
 static inline struct dax_device *dax_get_by_host(const char *host)
 {
 	return NULL;
 }
 static inline struct dax_device *alloc_dax(void *private, const char *host,
-		const struct dax_operations *ops)
+		const struct dax_operations *ops, unsigned long flags)
 {
 	/*
 	 * Callers should check IS_ENABLED(CONFIG_DAX) to know if this
include/linux/libnvdimm.h +1 -0
index feb342d026f2..3238a206e563 100644
@@ -264,6 +264,7 @@ void nvdimm_flush(struct nd_region *nd_region);
 int nvdimm_has_flush(struct nd_region *nd_region);
 int nvdimm_has_cache(struct nd_region *nd_region);
 int nvdimm_in_overwrite(struct nvdimm *nvdimm);
+bool is_nvdimm_sync(struct nd_region *nd_region);
 
 static inline int nvdimm_ctl(struct nvdimm *nvdimm, unsigned int cmd, void *buf,
 		unsigned int buf_len, int *cmd_rc)
Signature · 6 lines
2.20.1

_______________________________________________
Linux-nvdimm mailing list
[email protected]
https://lists.01.org/mailman/listinfo/linux-nvdimm
#23 lore raw

Re: [PATCH v8 3/6] libnvdimm: add dax_dev sync flag

Quoted 17 lines · Pankaj Gupta

This patch adds 'DAXDEV_SYNC' flag which is set for nd_region doing synchronous flush. This later is used to disable MAP_SYNC functionality for ext4 & xfs filesystem for devices don't support synchronous flush.

---
 drivers/dax/bus.c            |  2 +-
 drivers/dax/super.c          | 13 ++++++++++++-
 drivers/md/dm.c              |  3 ++-
 drivers/nvdimm/pmem.c        |  5 ++++-
 drivers/nvdimm/region_devs.c |  7 +++++++
 include/linux/dax.h          |  8 ++++++--
 include/linux/libnvdimm.h    |  1 +
 7 files changed, 33 insertions(+), 6 deletions(-)

[..]

drivers/md/dm.c static struct mapped_device *alloc_dev(int minor) · line 1973

Quoted 11 lines
drivers/md/dm.c +2 -1
index 043f0761e4a0..ee007b75d9fd 100644
@@ -1969,7 +1969,8 @@ static struct mapped_device *alloc_dev(int minor)
        sprintf(md->disk->disk_name, "dm-%d", minor);
 
        if (IS_ENABLED(CONFIG_DAX_DRIVER)) {
-               dax_dev = alloc_dax(md, md->disk->disk_name, &dm_dax_ops);
+               dax_dev = alloc_dax(md, md->disk->disk_name, &dm_dax_ops,
+                                                        DAXDEV_F_SYNC);

Apologies for not realizing this until now, but this is broken. Imaging a device-mapper configuration composed of both 'async' virtio-pmem and 'sync' pmem. The 'sync' flag needs to be unified across all members. I would change this argument to '0' and then arrange for it to be set at dm_table_supports_dax() time after validating that all components support synchronous dax.

#24 lore raw

Re: [PATCH v8 3/6] libnvdimm: add dax_dev sync flag

Quoted 27 lines
Quoted 19 lines

This patch adds 'DAXDEV_SYNC' flag which is set for nd_region doing synchronous flush. This later is used to disable MAP_SYNC functionality for ext4 & xfs filesystem for devices don't support synchronous flush.

---
 drivers/dax/bus.c            |  2 +-
 drivers/dax/super.c          | 13 ++++++++++++-
 drivers/md/dm.c              |  3 ++-
 drivers/nvdimm/pmem.c        |  5 ++++-
 drivers/nvdimm/region_devs.c |  7 +++++++
 include/linux/dax.h          |  8 ++++++--
 include/linux/libnvdimm.h    |  1 +
 7 files changed, 33 insertions(+), 6 deletions(-)

[..]

Quoted 7 lines
drivers/md/dm.c +0 -0
index 043f0761e4a0..ee007b75d9fd 100644
@@ -1969,7 +1969,8 @@ static struct mapped_device *alloc_dev(int minor)
        sprintf(md->disk->disk_name, "dm-%d", minor);
 
Quoted 11 lines

drivers/md/dm.c static struct mapped_device *alloc_dev(int minor) · line 1973

Quoted 4 lines
drivers/md/dm.c +2 -1
        if (IS_ENABLED(CONFIG_DAX_DRIVER)) {
-               dax_dev = alloc_dax(md, md->disk->disk_name, &dm_dax_ops);
+               dax_dev = alloc_dax(md, md->disk->disk_name, &dm_dax_ops,
+                                                        DAXDEV_F_SYNC);

Apologies for not realizing this until now, but this is broken. Imaging a device-mapper configuration composed of both 'async' virtio-pmem and 'sync' pmem. The 'sync' flag needs to be unified across all members. I would change this argument to '0' and then arrange for it to be set at dm_table_supports_dax() time after validating that all components support synchronous dax.

o.k. Need to set 'DAXDEV_F_SYNC' flag after verifying all the target components support synchronous DAX.

Just a question, If device mapper configuration have composed of both virtio-pmem or pmem devices, we want to configure device mapper for async flush?

Thank you,
Pankaj

Quoted 1 line
#25 lore raw

Re: [PATCH v8 3/6] libnvdimm: add dax_dev sync flag

In reply to Dan Williams
Quoted 27 lines
Quoted 19 lines

This patch adds 'DAXDEV_SYNC' flag which is set for nd_region doing synchronous flush. This later is used to disable MAP_SYNC functionality for ext4 & xfs filesystem for devices don't support synchronous flush.

---
 drivers/dax/bus.c            |  2 +-
 drivers/dax/super.c          | 13 ++++++++++++-
 drivers/md/dm.c              |  3 ++-
 drivers/nvdimm/pmem.c        |  5 ++++-
 drivers/nvdimm/region_devs.c |  7 +++++++
 include/linux/dax.h          |  8 ++++++--
 include/linux/libnvdimm.h    |  1 +
 7 files changed, 33 insertions(+), 6 deletions(-)

[..]

Quoted 7 lines
drivers/md/dm.c +0 -0
index 043f0761e4a0..ee007b75d9fd 100644
@@ -1969,7 +1969,8 @@ static struct mapped_device *alloc_dev(int minor)
        sprintf(md->disk->disk_name, "dm-%d", minor);
 
Quoted 11 lines

drivers/md/dm.c static struct mapped_device *alloc_dev(int minor) · line 1973

Quoted 4 lines
drivers/md/dm.c +2 -1
        if (IS_ENABLED(CONFIG_DAX_DRIVER)) {
-               dax_dev = alloc_dax(md, md->disk->disk_name, &dm_dax_ops);
+               dax_dev = alloc_dax(md, md->disk->disk_name, &dm_dax_ops,
+                                                        DAXDEV_F_SYNC);

Apologies for not realizing this until now, but this is broken. Imaging a device-mapper configuration composed of both 'async' virtio-pmem and 'sync' pmem. The 'sync' flag needs to be unified across all members. I would change this argument to '0' and then arrange for it to be set at dm_table_supports_dax() time after validating that all components support synchronous dax.

o.k. Need to set 'DAXDEV_F_SYNC' flag after verifying all the target components support synchronous DAX.

Just a question, If device mapper configuration have composed of both virtio-pmem or pmem devices, we want to configure device mapper for async flush?

Thank you,
Pankaj

Quoted 1 line
#26 lore raw

Re: [PATCH v8 3/6] libnvdimm: add dax_dev sync flag

Quoted 40 lines · Pankaj Gupta
Quoted 28 lines
Quoted 20 lines

This patch adds 'DAXDEV_SYNC' flag which is set for nd_region doing synchronous flush. This later is used to disable MAP_SYNC functionality for ext4 & xfs filesystem for devices don't support synchronous flush.

---
 drivers/dax/bus.c            |  2 +-
 drivers/dax/super.c          | 13 ++++++++++++-
 drivers/md/dm.c              |  3 ++-
 drivers/nvdimm/pmem.c        |  5 ++++-
 drivers/nvdimm/region_devs.c |  7 +++++++
 include/linux/dax.h          |  8 ++++++--
 include/linux/libnvdimm.h    |  1 +
 7 files changed, 33 insertions(+), 6 deletions(-)

[..]

Quoted 7 lines
drivers/md/dm.c +0 -0
index 043f0761e4a0..ee007b75d9fd 100644
@@ -1969,7 +1969,8 @@ static struct mapped_device *alloc_dev(int minor)
        sprintf(md->disk->disk_name, "dm-%d", minor);
 
Quoted 11 lines

drivers/md/dm.c static struct mapped_device *alloc_dev(int minor) · line 1973

Quoted 4 lines
drivers/md/dm.c +2 -1
        if (IS_ENABLED(CONFIG_DAX_DRIVER)) {
-               dax_dev = alloc_dax(md, md->disk->disk_name, &dm_dax_ops);
+               dax_dev = alloc_dax(md, md->disk->disk_name, &dm_dax_ops,
+                                                        DAXDEV_F_SYNC);

Apologies for not realizing this until now, but this is broken. Imaging a device-mapper configuration composed of both 'async' virtio-pmem and 'sync' pmem. The 'sync' flag needs to be unified across all members. I would change this argument to '0' and then arrange for it to be set at dm_table_supports_dax() time after validating that all components support synchronous dax.

Quoted 5 lines

o.k. Need to set 'DAXDEV_F_SYNC' flag after verifying all the target components support synchronous DAX.

Just a question, If device mapper configuration have composed of both virtio-pmem or pmem devices, we want to configure device mapper for async flush?

If it's composed of both then, yes, it needs to be async flush at the device-mapper level. Otherwise MAP_SYNC will succeed and fail to trigger fsync on the host file when necessary for the virtio-pmem backed portion of the device-mapper device.

#27 lore raw

Re: [PATCH v8 3/6] libnvdimm: add dax_dev sync flag

In reply to Pankaj Gupta
Quoted 40 lines · Pankaj Gupta
Quoted 28 lines
Quoted 20 lines

This patch adds 'DAXDEV_SYNC' flag which is set for nd_region doing synchronous flush. This later is used to disable MAP_SYNC functionality for ext4 & xfs filesystem for devices don't support synchronous flush.

---
 drivers/dax/bus.c            |  2 +-
 drivers/dax/super.c          | 13 ++++++++++++-
 drivers/md/dm.c              |  3 ++-
 drivers/nvdimm/pmem.c        |  5 ++++-
 drivers/nvdimm/region_devs.c |  7 +++++++
 include/linux/dax.h          |  8 ++++++--
 include/linux/libnvdimm.h    |  1 +
 7 files changed, 33 insertions(+), 6 deletions(-)

[..]

Quoted 7 lines
drivers/md/dm.c +0 -0
index 043f0761e4a0..ee007b75d9fd 100644
@@ -1969,7 +1969,8 @@ static struct mapped_device *alloc_dev(int minor)
        sprintf(md->disk->disk_name, "dm-%d", minor);
 
Quoted 11 lines

drivers/md/dm.c static struct mapped_device *alloc_dev(int minor) · line 1973

Quoted 4 lines
drivers/md/dm.c +2 -1
        if (IS_ENABLED(CONFIG_DAX_DRIVER)) {
-               dax_dev = alloc_dax(md, md->disk->disk_name, &dm_dax_ops);
+               dax_dev = alloc_dax(md, md->disk->disk_name, &dm_dax_ops,
+                                                        DAXDEV_F_SYNC);

Apologies for not realizing this until now, but this is broken. Imaging a device-mapper configuration composed of both 'async' virtio-pmem and 'sync' pmem. The 'sync' flag needs to be unified across all members. I would change this argument to '0' and then arrange for it to be set at dm_table_supports_dax() time after validating that all components support synchronous dax.

Quoted 5 lines

o.k. Need to set 'DAXDEV_F_SYNC' flag after verifying all the target components support synchronous DAX.

Just a question, If device mapper configuration have composed of both virtio-pmem or pmem devices, we want to configure device mapper for async flush?

If it's composed of both then, yes, it needs to be async flush at the device-mapper level. Otherwise MAP_SYNC will succeed and fail to trigger fsync on the host file when necessary for the virtio-pmem backed portion of the device-mapper device.
_______________________________________________
Linux-nvdimm mailing list
[email protected]
https://lists.01.org/mailman/listinfo/linux-nvdimm

#28 lore raw

Re: [Qemu-devel] [PATCH v8 3/6] libnvdimm: add dax_dev sync flag

Quoted 44 lines
Quoted 44 lines
Quoted 26 lines
Quoted 18 lines

This patch adds 'DAXDEV_SYNC' flag which is set for nd_region doing synchronous flush. This later is used to disable MAP_SYNC functionality for ext4 & xfs filesystem for devices don't support synchronous flush.

---
 drivers/dax/bus.c            |  2 +-
 drivers/dax/super.c          | 13 ++++++++++++-
 drivers/md/dm.c              |  3 ++-
 drivers/nvdimm/pmem.c        |  5 ++++-
 drivers/nvdimm/region_devs.c |  7 +++++++
 include/linux/dax.h          |  8 ++++++--
 include/linux/libnvdimm.h    |  1 +
 7 files changed, 33 insertions(+), 6 deletions(-)

[..]

Quoted 7 lines
drivers/md/dm.c +0 -0
index 043f0761e4a0..ee007b75d9fd 100644
@@ -1969,7 +1969,8 @@ static struct mapped_device *alloc_dev(int minor)
        sprintf(md->disk->disk_name, "dm-%d", minor);
 
Quoted 14 lines

drivers/md/dm.c static struct mapped_device *alloc_dev(int minor) · line 1976

Quoted 7 lines
drivers/md/dm.c +2 -1
        if (IS_ENABLED(CONFIG_DAX_DRIVER)) {
-               dax_dev = alloc_dax(md, md->disk->disk_name,
 &dm_dax_ops);
+               dax_dev = alloc_dax(md, md->disk->disk_name,
 &dm_dax_ops,
+
 DAXDEV_F_SYNC);

Apologies for not realizing this until now, but this is broken. Imaging a device-mapper configuration composed of both 'async' virtio-pmem and 'sync' pmem. The 'sync' flag needs to be unified across all members. I would change this argument to '0' and then arrange for it to be set at dm_table_supports_dax() time after validating that all components support synchronous dax.

o.k. Need to set 'DAXDEV_F_SYNC' flag after verifying all the target components support synchronous DAX.

Quoted 8 lines
Quoted 3 lines

Just a question, If device mapper configuration have composed of both virtio-pmem or pmem devices, we want to configure device mapper for async flush?

If it's composed of both then, yes, it needs to be async flush at the device-mapper level. Otherwise MAP_SYNC will succeed and fail to trigger fsync on the host file when necessary for the virtio-pmem backed portion of the device-mapper device.

o.k. Agree.

Thanks you,
Pankaj

Quoted 2 lines
#29 lore raw

Re: [Qemu-devel] [PATCH v8 3/6] libnvdimm: add dax_dev sync flag

Hi Dan,

While testing device mapper with DAX, I faced a bug with the commit:

commit ad428cdb525a97d15c0349fdc80f3d58befb50df

Author: Dan Williams <[email protected]>
Date:   Wed Feb 20 21:12:50 2019 -0800

When I reverted the condition to old code[1] it worked for me. I am thinking when we map two different devices (e.g with device mapper), will start & end pfn still point to same pgmap? Or there is something else which I am missing here.

Note: I tested only EXT4.

[1]

-               if (pgmap && pgmap->type == MEMORY_DEVICE_FS_DAX)
+               end_pgmap = get_dev_pagemap(pfn_t_to_pfn(end_pfn), NULL);
+               if (pgmap && pgmap == end_pgmap && pgmap->type == MEMORY_DEVICE_FS_DAX
+                               && pfn_t_to_page(pfn)->pgmap == pgmap
+                               && pfn_t_to_page(end_pfn)->pgmap == pgmap
+                               && pfn_t_to_pfn(pfn) == PHYS_PFN(__pa(kaddr))
+                               && pfn_t_to_pfn(end_pfn) == PHYS_PFN(__pa(end_kaddr)))
                        dax_enabled = true;
                put_dev_pagemap(pgmap);

Thanks,
Pankaj

#30 lore raw

Re: [Qemu-devel] [PATCH v8 3/6] libnvdimm: add dax_dev sync flag

In reply to Pankaj Gupta

Hi Dan,

While testing device mapper with DAX, I faced a bug with the commit:

commit ad428cdb525a97d15c0349fdc80f3d58befb50df

Author: Dan Williams <[email protected]>
Date:   Wed Feb 20 21:12:50 2019 -0800

When I reverted the condition to old code[1] it worked for me. I am thinking when we map two different devices (e.g with device mapper), will start & end pfn still point to same pgmap? Or there is something else which I am missing here.

Note: I tested only EXT4.

[1]

-               if (pgmap && pgmap->type == MEMORY_DEVICE_FS_DAX)
+               end_pgmap = get_dev_pagemap(pfn_t_to_pfn(end_pfn), NULL);
+               if (pgmap && pgmap == end_pgmap && pgmap->type == MEMORY_DEVICE_FS_DAX
+                               && pfn_t_to_page(pfn)->pgmap == pgmap
+                               && pfn_t_to_page(end_pfn)->pgmap == pgmap
+                               && pfn_t_to_pfn(pfn) == PHYS_PFN(__pa(kaddr))
+                               && pfn_t_to_pfn(end_pfn) == PHYS_PFN(__pa(end_kaddr)))
                        dax_enabled = true;
                put_dev_pagemap(pgmap);

Thanks,
Pankaj

#31 lore raw

Re: [Qemu-devel] [PATCH v8 3/6] libnvdimm: add dax_dev sync flag

Quoted 19 lines · Pankaj Gupta

Hi Dan,

While testing device mapper with DAX, I faced a bug with the commit:

commit ad428cdb525a97d15c0349fdc80f3d58befb50df

Author: Dan Williams <[email protected]>
Date:   Wed Feb 20 21:12:50 2019 -0800

When I reverted the condition to old code[1] it worked for me. I am thinking when we map two different devices (e.g with device mapper), will start & end pfn still point to same pgmap? Or there is something else which I am missing here.

Note: I tested only EXT4.

[1]

Review

Quoted 7 lines
(quoted diff) +6 -1
-               if (pgmap && pgmap->type == MEMORY_DEVICE_FS_DAX)
+               end_pgmap = get_dev_pagemap(pfn_t_to_pfn(end_pfn), NULL);
+               if (pgmap && pgmap == end_pgmap && pgmap->type == MEMORY_DEVICE_FS_DAX
+                               && pfn_t_to_page(pfn)->pgmap == pgmap
+                               && pfn_t_to_page(end_pfn)->pgmap == pgmap
+                               && pfn_t_to_pfn(pfn) == PHYS_PFN(__pa(kaddr))
+                               && pfn_t_to_pfn(end_pfn) == PHYS_PFN(__pa(end_kaddr)))

Ugh, yes, device-mapper continues to be an awkward fit for dax (or vice versa). We would either need a way to have a multi-level pfn to pagemap lookup for composite devices, or a way to discern that even though the pagemap is different that the result is still valid / not an indication that we have leaked into an unassociated address range. Perhaps a per-daxdev callback for ->dax_supported() so that device-mapper internals can be used for this validation.

We need to get that fixed up, but I don't see it as a blocker / pre-requisite for virtio-pmem.

#32 lore raw

Re: [Qemu-devel] [PATCH v8 3/6] libnvdimm: add dax_dev sync flag

Quoted 32 lines
Quoted 28 lines

Hi Dan,

While testing device mapper with DAX, I faced a bug with the commit:

commit ad428cdb525a97d15c0349fdc80f3d58befb50df

Author: Dan Williams <[email protected]>
Date:   Wed Feb 20 21:12:50 2019 -0800

When I reverted the condition to old code[1] it worked for me. I am thinking when we map two different devices (e.g with device mapper), will
start & end pfn still point to same pgmap? Or there is something else which I am missing here.

Note: I tested only EXT4.

[1]

(quoted diff) +2 -1
-               if (pgmap && pgmap->type == MEMORY_DEVICE_FS_DAX)
+               end_pgmap = get_dev_pagemap(pfn_t_to_pfn(end_pfn), NULL);
+               if (pgmap && pgmap == end_pgmap && pgmap->type ==

MEMORY_DEVICE_FS_DAX

(quoted diff) +3 -0
+                               && pfn_t_to_page(pfn)->pgmap == pgmap
+                               && pfn_t_to_page(end_pfn)->pgmap == pgmap
+                               && pfn_t_to_pfn(pfn) ==
Quoted 3 lines

PHYS_PFN(__pa(kaddr))
+ && pfn_t_to_pfn(end_pfn) ==
PHYS_PFN(__pa(end_kaddr)))

Quoted 7 lines

Ugh, yes, device-mapper continues to be an awkward fit for dax (or vice versa). We would either need a way to have a multi-level pfn to pagemap lookup for composite devices, or a way to discern that even though the pagemap is different that the result is still valid / not an indication that we have leaked into an unassociated address range. Perhaps a per-daxdev callback for ->dax_supported() so that device-mapper internals can be used for this validation.

Yes, Will look at it.

Quoted 3 lines

We need to get that fixed up, but I don't see it as a blocker / pre-requisite for virtio-pmem.

Agree. Will send virtio-pmem patch series.

Thank you,
Pankaj

Quoted 2 lines
#33 lore raw

Re: [PATCH v8 3/6] libnvdimm: add dax_dev sync flag

In reply to Pankaj Gupta
Quoted 17 lines · Pankaj Gupta

This patch adds 'DAXDEV_SYNC' flag which is set for nd_region doing synchronous flush. This later is used to disable MAP_SYNC functionality for ext4 & xfs filesystem for devices don't support synchronous flush.

---
 drivers/dax/bus.c            |  2 +-
 drivers/dax/super.c          | 13 ++++++++++++-
 drivers/md/dm.c              |  3 ++-
 drivers/nvdimm/pmem.c        |  5 ++++-
 drivers/nvdimm/region_devs.c |  7 +++++++
 include/linux/dax.h          |  8 ++++++--
 include/linux/libnvdimm.h    |  1 +
 7 files changed, 33 insertions(+), 6 deletions(-)

[..]

drivers/md/dm.c static struct mapped_device *alloc_dev(int minor) · line 1973

Quoted 11 lines
drivers/md/dm.c +2 -1
index 043f0761e4a0..ee007b75d9fd 100644
@@ -1969,7 +1969,8 @@ static struct mapped_device *alloc_dev(int minor)
        sprintf(md->disk->disk_name, "dm-%d", minor);
 
        if (IS_ENABLED(CONFIG_DAX_DRIVER)) {
-               dax_dev = alloc_dax(md, md->disk->disk_name, &dm_dax_ops);
+               dax_dev = alloc_dax(md, md->disk->disk_name, &dm_dax_ops,
+                                                        DAXDEV_F_SYNC);

Apologies for not realizing this until now, but this is broken. Imaging a device-mapper configuration composed of both 'async' virtio-pmem and 'sync' pmem. The 'sync' flag needs to be unified across all members. I would change this argument to '0' and then arrange for it to be set at dm_table_supports_dax() time after validating that all components support synchronous dax.

#34 lore raw

PATCH v8 4/6 dax: check synchronous mapping is supported

In reply to Pankaj Gupta

This patch introduces 'daxdev_mapping_supported' helper which checks if 'MAP_SYNC' is supported with filesystem mapping. It also checks if corresponding dax_device is synchronous. Virtio pmem device is asynchronous and does not not support VM_SYNC.

---
 include/linux/dax.h | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)
include/linux/dax.h +17 -0
index c97fc0cc7167..41b4a5db6305 100644
@@ -41,6 +41,18 @@ void kill_dax(struct dax_device *dax_dev);
 void dax_write_cache(struct dax_device *dax_dev, bool wc);
 bool dax_write_cache_enabled(struct dax_device *dax_dev);
 bool dax_synchronous(struct dax_device *dax_dev);
+/*
+ * Check if given mapping is supported by the file / underlying device.
+ */
+static inline bool daxdev_mapping_supported(struct vm_area_struct *vma,
+				struct dax_device *dax_dev)
+{
+	if (!(vma->vm_flags & VM_SYNC))
+		return true;
+	if (!IS_DAX(file_inode(vma->vm_file)))
+		return false;
+	return dax_synchronous(dax_dev);
+}
 #else
 static inline struct dax_device *dax_get_by_host(const char *host)
 {
@@ -68,6 +80,11 @@ static inline bool dax_write_cache_enabled(struct dax_device *dax_dev)
 {
 	return false;
 }
+static inline bool daxdev_mapping_supported(struct vm_area_struct *vma,
+				struct dax_device *dax_dev)
+{
+	return !(vma->vm_flags & VM_SYNC);
+}
 #endif
 
 struct writeback_control;
Signature · 1 line
2.20.1
#35 lore raw

PATCH v8 4/6 dax: check synchronous mapping is supported

In reply to Pankaj Gupta

This patch introduces 'daxdev_mapping_supported' helper which checks if 'MAP_SYNC' is supported with filesystem mapping. It also checks if corresponding dax_device is synchronous. Virtio pmem device is asynchronous and does not not support VM_SYNC.

---
 include/linux/dax.h | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)
include/linux/dax.h +17 -0
index c97fc0cc7167..41b4a5db6305 100644
@@ -41,6 +41,18 @@ void kill_dax(struct dax_device *dax_dev);
 void dax_write_cache(struct dax_device *dax_dev, bool wc);
 bool dax_write_cache_enabled(struct dax_device *dax_dev);
 bool dax_synchronous(struct dax_device *dax_dev);
+/*
+ * Check if given mapping is supported by the file / underlying device.
+ */
+static inline bool daxdev_mapping_supported(struct vm_area_struct *vma,
+				struct dax_device *dax_dev)
+{
+	if (!(vma->vm_flags & VM_SYNC))
+		return true;
+	if (!IS_DAX(file_inode(vma->vm_file)))
+		return false;
+	return dax_synchronous(dax_dev);
+}
 #else
 static inline struct dax_device *dax_get_by_host(const char *host)
 {
@@ -68,6 +80,11 @@ static inline bool dax_write_cache_enabled(struct dax_device *dax_dev)
 {
 	return false;
 }
+static inline bool daxdev_mapping_supported(struct vm_area_struct *vma,
+				struct dax_device *dax_dev)
+{
+	return !(vma->vm_flags & VM_SYNC);
+}
 #endif
 
 struct writeback_control;
Signature · 6 lines
2.20.1

_______________________________________________
Linux-nvdimm mailing list
[email protected]
https://lists.01.org/mailman/listinfo/linux-nvdimm
#36 lore raw

PATCH v8 5/6 ext4: disable map_sync for async flush

In reply to Pankaj Gupta

Dont support 'MAP_SYNC' with non-DAX files and DAX files with asynchronous dax_device. Virtio pmem provides asynchronous host page cache flush mechanism. We don't support 'MAP_SYNC' with virtio pmem and ext4.

---
 fs/ext4/file.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)
fs/ext4/file.c +6 -4
index 98ec11f69cd4..dee549339e13 100644
@@ -360,15 +360,17 @@ static const struct vm_operations_struct ext4_file_vm_ops = {
 static int ext4_file_mmap(struct file *file, struct vm_area_struct *vma)
 {
 	struct inode *inode = file->f_mapping->host;
+	struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
+	struct dax_device *dax_dev = sbi->s_daxdev;
 
-	if (unlikely(ext4_forced_shutdown(EXT4_SB(inode->i_sb))))
+	if (unlikely(ext4_forced_shutdown(sbi)))
 		return -EIO;
 
 	/*
-	 * We don't support synchronous mappings for non-DAX files. At least
-	 * until someone comes with a sensible use case.
+	 * We don't support synchronous mappings for non-DAX files and
+	 * for DAX files if underneath dax_device is not synchronous.
 	 */
-	if (!IS_DAX(file_inode(file)) && (vma->vm_flags & VM_SYNC))
+	if (!daxdev_mapping_supported(vma, dax_dev))
 		return -EOPNOTSUPP;
 
 	file_accessed(file);
Signature · 1 line
2.20.1
#37 lore raw

PATCH v8 5/6 ext4: disable map_sync for async flush

In reply to Pankaj Gupta

Dont support 'MAP_SYNC' with non-DAX files and DAX files with asynchronous dax_device. Virtio pmem provides asynchronous host page cache flush mechanism. We don't support 'MAP_SYNC' with virtio pmem and ext4.

---
 fs/ext4/file.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)
fs/ext4/file.c +6 -4
index 98ec11f69cd4..dee549339e13 100644
@@ -360,15 +360,17 @@ static const struct vm_operations_struct ext4_file_vm_ops = {
 static int ext4_file_mmap(struct file *file, struct vm_area_struct *vma)
 {
 	struct inode *inode = file->f_mapping->host;
+	struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
+	struct dax_device *dax_dev = sbi->s_daxdev;
 
-	if (unlikely(ext4_forced_shutdown(EXT4_SB(inode->i_sb))))
+	if (unlikely(ext4_forced_shutdown(sbi)))
 		return -EIO;
 
 	/*
-	 * We don't support synchronous mappings for non-DAX files. At least
-	 * until someone comes with a sensible use case.
+	 * We don't support synchronous mappings for non-DAX files and
+	 * for DAX files if underneath dax_device is not synchronous.
 	 */
-	if (!IS_DAX(file_inode(file)) && (vma->vm_flags & VM_SYNC))
+	if (!daxdev_mapping_supported(vma, dax_dev))
 		return -EOPNOTSUPP;
 
 	file_accessed(file);
Signature · 1 line
2.20.1
#38 lore raw

PATCH v8 6/6 xfs: disable map_sync for async flush

In reply to Pankaj Gupta

Dont support 'MAP_SYNC' with non-DAX files and DAX files with asynchronous dax_device. Virtio pmem provides asynchronous host page cache flush mechanism. We don't support 'MAP_SYNC' with virtio pmem and xfs.

---
 fs/xfs/xfs_file.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)
fs/xfs/xfs_file.c +6 -3
index a7ceae90110e..f17652cca5ff 100644
@@ -1203,11 +1203,14 @@ xfs_file_mmap(
 	struct file	*filp,
 	struct vm_area_struct *vma)
 {
+	struct dax_device 	*dax_dev;
+
+	dax_dev = xfs_find_daxdev_for_inode(file_inode(filp));
 	/*
-	 * We don't support synchronous mappings for non-DAX files. At least
-	 * until someone comes with a sensible use case.
+	 * We don't support synchronous mappings for non-DAX files and
+	 * for DAX files if underneath dax_device is not synchronous.
 	 */
-	if (!IS_DAX(file_inode(filp)) && (vma->vm_flags & VM_SYNC))
+	if (!daxdev_mapping_supported(vma, dax_dev))
 		return -EOPNOTSUPP;
 
 	file_accessed(filp);
Signature · 1 line
2.20.1
#39 lore raw

PATCH v8 6/6 xfs: disable map_sync for async flush

In reply to Pankaj Gupta

Dont support 'MAP_SYNC' with non-DAX files and DAX files with asynchronous dax_device. Virtio pmem provides asynchronous host page cache flush mechanism. We don't support 'MAP_SYNC' with virtio pmem and xfs.

---
 fs/xfs/xfs_file.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)
fs/xfs/xfs_file.c +6 -3
index a7ceae90110e..f17652cca5ff 100644
@@ -1203,11 +1203,14 @@ xfs_file_mmap(
 	struct file	*filp,
 	struct vm_area_struct *vma)
 {
+	struct dax_device 	*dax_dev;
+
+	dax_dev = xfs_find_daxdev_for_inode(file_inode(filp));
 	/*
-	 * We don't support synchronous mappings for non-DAX files. At least
-	 * until someone comes with a sensible use case.
+	 * We don't support synchronous mappings for non-DAX files and
+	 * for DAX files if underneath dax_device is not synchronous.
 	 */
-	if (!IS_DAX(file_inode(filp)) && (vma->vm_flags & VM_SYNC))
+	if (!daxdev_mapping_supported(vma, dax_dev))
 		return -EOPNOTSUPP;
 
 	file_accessed(filp);
Signature · 6 lines
2.20.1

_______________________________________________
Linux-nvdimm mailing list
[email protected]
https://lists.01.org/mailman/listinfo/linux-nvdimm
#40 lore raw
In reply to Pankaj Gupta
Quoted 3 lines · Pankaj Gupta

Hi Michael & Dan,

Please review/ack the patch series from LIBNVDIMM & VIRTIO side.

Thanks!
Hope to do this early next week.

Quoted 190 lines

We have ack on ext4, xfs patches(4, 5 & 6) patch 2. Still need your ack on nvdimm patches(1 & 3) & virtio patch 2.

Changes done from v7 are only in patch(2 & 3) and not affecting existing reviews. Request to please review.
----

This patch series has implementation for "virtio pmem". "virtio pmem" is fake persistent memory(nvdimm) in guest which allows to bypass the guest page cache. This also implements a VIRTIO based asynchronous flush mechanism.

Sharing guest kernel driver in this patchset with the changes suggested in v4. Tested with Qemu side device emulation [6] for virtio-pmem. Documented the impact of possible page cache side channel attacks with suggested countermeasures.

Details of project idea for 'virtio pmem' flushing interface is shared [3] & [4].

Implementation is divided into two parts:
New virtio pmem guest driver and qemu code changes for new virtio pmem paravirtualized device.

1. Guest virtio-pmem kernel driver
---------------------------------
- Reads persistent memory range from paravirt device and registers with 'nvdimm_bus'.
- 'nvdimm/pmem' driver uses this information to allocate persistent memory region and setup filesystem operations to the allocated memory.
- virtio pmem driver implements asynchronous flushing interface to flush from guest to host.

2. Qemu virtio-pmem device
---------------------------------
- Creates virtio pmem device and exposes a memory range to KVM guest.
- At host side this is file backed memory which acts as persistent memory.
- Qemu side flush uses aio thread pool API's and virtio for asynchronous guest multi request handling.

David Hildenbrand CCed also posted a modified version[7] of qemu virtio-pmem code based on updated Qemu memory device API.

Virtio-pmem security implications and countermeasures:
-----------------------------------------------------

In previous posting of kernel driver, there was discussion [9] on possible implications of page cache side channel attacks with virtio pmem. After thorough analysis of details of known side channel attacks, below are the suggestions:

- Depends entirely on how host backing image file is mapped into guest address space.

- virtio-pmem device emulation, by default shared mapping is used to map host backing file. It is recommended to use separate backing file at host side for every guest. This will prevent any possibility of executing common code from multiple guests and any chance of inferring guest local data based based on execution time.

- If backing file is required to be shared among multiple guests it is recommended to don't support host page cache eviction commands from the guest driver. This will avoid any possibility of inferring guest local data or host data from another guest.

- Proposed device specification [8] for virtio-pmem device with details of possible security implications and suggested countermeasures for device emulation.

Virtio-pmem errors handling:
----------------------------------------
Checked behaviour of virtio-pmem for below types of errors Need suggestions on expected behaviour for handling these errors?

- Hardware Errors: Uncorrectable recoverable Errors:
a] virtio-pmem:
- As per current logic if error page belongs to Qemu process, host MCE handler isolates(hwpoison) that page and send SIGBUS. Qemu SIGBUS handler injects exception to KVM guest.
- KVM guest then isolates the page and send SIGBUS to guest userspace process which has mapped the page.

b] Existing implementation for ACPI pmem driver:
- Handles such errors with MCE notifier and creates a list of bad blocks. Read/direct access DAX operation return EIO if accessed memory page fall in bad block list.
- It also starts backgound scrubbing.
- Similar functionality can be reused in virtio-pmem with MCE notifier but without scrubbing(no ACPI/ARS)? Need inputs to confirm if this behaviour is ok or needs any change?

Changes from PATCH v7: [1]
- Corrected pending request queue logic (patch 2) - Jakub Staroń
- Used unsigned long flags for passing DAXDEV_F_SYNC (patch 3) - Dan
- Fixed typo => vma 'flag' to 'vm_flag' (patch 4)
- Added rob in patch 6 & patch 2

Changes from PATCH v6: [1]
- Corrected comment format in patch 5 & patch 6. [Dave]
- Changed variable declaration indentation in patch 6 [Darrick]
- Add Reviewed-by tag by 'Jan Kara' in patch 4 & patch 5

Changes from PATCH v5: [2]
Changes suggested in by - [Cornelia, Yuval]
- Remove assignment chaining in virtio driver
- Better error message and remove not required free
- Check nd_region before use

Changes suggested by - [Jan Kara]
- dax_synchronous() for !CONFIG_DAX
- Correct 'daxdev_mapping_supported' comment and non-dax implementation

Changes suggested by - [Dan Williams]
- Pass meaningful flag 'DAXDEV_F_SYNC' to alloc_dax
- Gate nvdimm_flush instead of additional async parameter
- Move block chaining logic to flush callback than common nvdimm_flush
- Use NULL flush callback for generic flush for better readability [Dan, Jan]

- Use virtio device id 27 from 25(already used) - [MST]

Changes from PATCH v4:
- Factor out MAP_SYNC supported functionality to a common helper [Dave, Darrick, Jan]
- Comment, indentation and virtqueue_kick failure handle - Yuval Shaia

Changes from PATCH v3:
- Use generic dax_synchronous() helper to check for DAXDEV_SYNC flag - [Dan, Darrick, Jan]
- Add 'is_nvdimm_async' function
- Document page cache side channel attacks implications & countermeasures - [Dave Chinner, Michael]

Changes from PATCH v2:
- Disable MAP_SYNC for ext4 & XFS filesystems - [Dan]
- Use name 'virtio pmem' in place of 'fake dax'

Changes from PATCH v1:
- 0-day build test for build dependency on libnvdimm

Changes suggested by - [Dan Williams]
- Split the driver into two parts virtio & pmem
- Move queuing of async block request to block layer
- Add "sync" parameter in nvdimm_flush function
- Use indirect call for nvdimm_flush
- Don’t move declarations to common global header e.g nd.h
- nvdimm_flush() return 0 or -EIO if it fails
- Teach nsio_rw_bytes() that the flush can fail
- Rename nvdimm_flush() to generic_nvdimm_flush()
- Use 'nd_region->provider_data' for long dereferencing
- Remove virtio_pmem_freeze/restore functions
- Remove BSD license text with SPDX license text

- Add might_sleep() in virtio_pmem_flush - [Luiz]
- Make spin_lock_irqsave() narrow

Pankaj Gupta (6):
libnvdimm: nd_region flush callback support
virtio-pmem: Add virtio-pmem guest driver
libnvdimm: add nd_region buffered dax_dev flag
dax: check synchronous mapping is supported
ext4: disable map_sync for virtio pmem
xfs: disable map_sync for virtio pmem

[1] https://lkml.org/lkml/2019/4/26/36
[2] https://lkml.org/lkml/2019/4/23/1092
[3] https://www.spinics.net/lists/kvm/msg149761.html
[4] https://www.spinics.net/lists/kvm/msg153095.html
[5] https://lkml.org/lkml/2018/8/31/413
[6] https://marc.info/?l=linux-kernel&m=153572228719237&w=2
[7] https://marc.info/?l=qemu-devel&m=153555721901824&w=2
[8] https://lists.oasis-open.org/archives/virtio-dev/201903/msg00083.html
[9] https://lkml.org/lkml/2019/1/9/1191

 drivers/acpi/nfit/core.c         |    4 -
 drivers/dax/bus.c                |    2 
 drivers/dax/super.c              |   13 +++
 drivers/md/dm.c                  |    3 
 drivers/nvdimm/Makefile          |    1 
 drivers/nvdimm/claim.c           |    6 +
 drivers/nvdimm/nd.h              |    1 
 drivers/nvdimm/nd_virtio.c       |  129 +++++++++++++++++++++++++++++++++++++++
 drivers/nvdimm/pmem.c            |   18 +++--
 drivers/nvdimm/region_devs.c     |   33 +++++++++
 drivers/nvdimm/virtio_pmem.c     |  117 +++++++++++++++++++++++++++++++++++
 drivers/virtio/Kconfig           |   10 +++
Quoted 8 lines
 fs/ext4/file.c                   |   10 +--
 fs/xfs/xfs_file.c                |    9 +-
 include/linux/dax.h              |   25 ++++++-
 include/linux/libnvdimm.h        |    9 ++
 include/linux/virtio_pmem.h      |   60 ++++++++++++++++++
 include/uapi/linux/virtio_ids.h  |    1 
 include/uapi/linux/virtio_pmem.h |   10 +++
 19 files changed, 436 insertions(+), 25 deletions(-)

_______________________________________________
Virtualization mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/virtualization

#41 lore raw
In reply to Pankaj Gupta
Quoted 3 lines · Pankaj Gupta

Hi Michael & Dan,

Please review/ack the patch series from LIBNVDIMM & VIRTIO side.

Thanks!
Hope to do this early next week.

Quoted 190 lines

We have ack on ext4, xfs patches(4, 5 & 6) patch 2. Still need your ack on nvdimm patches(1 & 3) & virtio patch 2.

Changes done from v7 are only in patch(2 & 3) and not affecting existing reviews. Request to please review.
----

This patch series has implementation for "virtio pmem". "virtio pmem" is fake persistent memory(nvdimm) in guest which allows to bypass the guest page cache. This also implements a VIRTIO based asynchronous flush mechanism.

Sharing guest kernel driver in this patchset with the changes suggested in v4. Tested with Qemu side device emulation [6] for virtio-pmem. Documented the impact of possible page cache side channel attacks with suggested countermeasures.

Details of project idea for 'virtio pmem' flushing interface is shared [3] & [4].

Implementation is divided into two parts:
New virtio pmem guest driver and qemu code changes for new virtio pmem paravirtualized device.

1. Guest virtio-pmem kernel driver
---------------------------------
- Reads persistent memory range from paravirt device and registers with 'nvdimm_bus'.
- 'nvdimm/pmem' driver uses this information to allocate persistent memory region and setup filesystem operations to the allocated memory.
- virtio pmem driver implements asynchronous flushing interface to flush from guest to host.

2. Qemu virtio-pmem device
---------------------------------
- Creates virtio pmem device and exposes a memory range to KVM guest.
- At host side this is file backed memory which acts as persistent memory.
- Qemu side flush uses aio thread pool API's and virtio for asynchronous guest multi request handling.

David Hildenbrand CCed also posted a modified version[7] of qemu virtio-pmem code based on updated Qemu memory device API.

Virtio-pmem security implications and countermeasures:
-----------------------------------------------------

In previous posting of kernel driver, there was discussion [9] on possible implications of page cache side channel attacks with virtio pmem. After thorough analysis of details of known side channel attacks, below are the suggestions:

- Depends entirely on how host backing image file is mapped into guest address space.

- virtio-pmem device emulation, by default shared mapping is used to map host backing file. It is recommended to use separate backing file at host side for every guest. This will prevent any possibility of executing common code from multiple guests and any chance of inferring guest local data based based on execution time.

- If backing file is required to be shared among multiple guests it is recommended to don't support host page cache eviction commands from the guest driver. This will avoid any possibility of inferring guest local data or host data from another guest.

- Proposed device specification [8] for virtio-pmem device with details of possible security implications and suggested countermeasures for device emulation.

Virtio-pmem errors handling:
----------------------------------------
Checked behaviour of virtio-pmem for below types of errors Need suggestions on expected behaviour for handling these errors?

- Hardware Errors: Uncorrectable recoverable Errors:
a] virtio-pmem:
- As per current logic if error page belongs to Qemu process, host MCE handler isolates(hwpoison) that page and send SIGBUS. Qemu SIGBUS handler injects exception to KVM guest.
- KVM guest then isolates the page and send SIGBUS to guest userspace process which has mapped the page.

b] Existing implementation for ACPI pmem driver:
- Handles such errors with MCE notifier and creates a list of bad blocks. Read/direct access DAX operation return EIO if accessed memory page fall in bad block list.
- It also starts backgound scrubbing.
- Similar functionality can be reused in virtio-pmem with MCE notifier but without scrubbing(no ACPI/ARS)? Need inputs to confirm if this behaviour is ok or needs any change?

Changes from PATCH v7: [1]
- Corrected pending request queue logic (patch 2) - Jakub Staroń
- Used unsigned long flags for passing DAXDEV_F_SYNC (patch 3) - Dan
- Fixed typo => vma 'flag' to 'vm_flag' (patch 4)
- Added rob in patch 6 & patch 2

Changes from PATCH v6: [1]
- Corrected comment format in patch 5 & patch 6. [Dave]
- Changed variable declaration indentation in patch 6 [Darrick]
- Add Reviewed-by tag by 'Jan Kara' in patch 4 & patch 5

Changes from PATCH v5: [2]
Changes suggested in by - [Cornelia, Yuval]
- Remove assignment chaining in virtio driver
- Better error message and remove not required free
- Check nd_region before use

Changes suggested by - [Jan Kara]
- dax_synchronous() for !CONFIG_DAX
- Correct 'daxdev_mapping_supported' comment and non-dax implementation

Changes suggested by - [Dan Williams]
- Pass meaningful flag 'DAXDEV_F_SYNC' to alloc_dax
- Gate nvdimm_flush instead of additional async parameter
- Move block chaining logic to flush callback than common nvdimm_flush
- Use NULL flush callback for generic flush for better readability [Dan, Jan]

- Use virtio device id 27 from 25(already used) - [MST]

Changes from PATCH v4:
- Factor out MAP_SYNC supported functionality to a common helper [Dave, Darrick, Jan]
- Comment, indentation and virtqueue_kick failure handle - Yuval Shaia

Changes from PATCH v3:
- Use generic dax_synchronous() helper to check for DAXDEV_SYNC flag - [Dan, Darrick, Jan]
- Add 'is_nvdimm_async' function
- Document page cache side channel attacks implications & countermeasures - [Dave Chinner, Michael]

Changes from PATCH v2:
- Disable MAP_SYNC for ext4 & XFS filesystems - [Dan]
- Use name 'virtio pmem' in place of 'fake dax'

Changes from PATCH v1:
- 0-day build test for build dependency on libnvdimm

Changes suggested by - [Dan Williams]
- Split the driver into two parts virtio & pmem
- Move queuing of async block request to block layer
- Add "sync" parameter in nvdimm_flush function
- Use indirect call for nvdimm_flush
- Don’t move declarations to common global header e.g nd.h
- nvdimm_flush() return 0 or -EIO if it fails
- Teach nsio_rw_bytes() that the flush can fail
- Rename nvdimm_flush() to generic_nvdimm_flush()
- Use 'nd_region->provider_data' for long dereferencing
- Remove virtio_pmem_freeze/restore functions
- Remove BSD license text with SPDX license text

- Add might_sleep() in virtio_pmem_flush - [Luiz]
- Make spin_lock_irqsave() narrow

Pankaj Gupta (6):
libnvdimm: nd_region flush callback support
virtio-pmem: Add virtio-pmem guest driver
libnvdimm: add nd_region buffered dax_dev flag
dax: check synchronous mapping is supported
ext4: disable map_sync for virtio pmem
xfs: disable map_sync for virtio pmem

[1] https://lkml.org/lkml/2019/4/26/36
[2] https://lkml.org/lkml/2019/4/23/1092
[3] https://www.spinics.net/lists/kvm/msg149761.html
[4] https://www.spinics.net/lists/kvm/msg153095.html
[5] https://lkml.org/lkml/2018/8/31/413
[6] https://marc.info/?l=linux-kernel&m=153572228719237&w=2
[7] https://marc.info/?l=qemu-devel&m=153555721901824&w=2
[8] https://lists.oasis-open.org/archives/virtio-dev/201903/msg00083.html
[9] https://lkml.org/lkml/2019/1/9/1191

 drivers/acpi/nfit/core.c         |    4 -
 drivers/dax/bus.c                |    2 
 drivers/dax/super.c              |   13 +++
 drivers/md/dm.c                  |    3 
 drivers/nvdimm/Makefile          |    1 
 drivers/nvdimm/claim.c           |    6 +
 drivers/nvdimm/nd.h              |    1 
 drivers/nvdimm/nd_virtio.c       |  129 +++++++++++++++++++++++++++++++++++++++
 drivers/nvdimm/pmem.c            |   18 +++--
 drivers/nvdimm/region_devs.c     |   33 +++++++++
 drivers/nvdimm/virtio_pmem.c     |  117 +++++++++++++++++++++++++++++++++++
 drivers/virtio/Kconfig           |   10 +++
Quoted 8 lines
 fs/ext4/file.c                   |   10 +--
 fs/xfs/xfs_file.c                |    9 +-
 include/linux/dax.h              |   25 ++++++-
 include/linux/libnvdimm.h        |    9 ++
 include/linux/virtio_pmem.h      |   60 ++++++++++++++++++
 include/uapi/linux/virtio_ids.h  |    1 
 include/uapi/linux/virtio_pmem.h |   10 +++
 19 files changed, 436 insertions(+), 25 deletions(-)

_______________________________________________
Linux-nvdimm mailing list
[email protected]
https://lists.01.org/mailman/listinfo/linux-nvdimm

#42 lore raw
In reply to Pankaj Gupta
Quoted 6 lines · Pankaj Gupta

Hi Michael & Dan,

Please review/ack the patch series from LIBNVDIMM & VIRTIO side. We have ack on ext4, xfs patches(4, 5 & 6) patch 2. Still need your ack on nvdimm patches(1 & 3) & virtio patch 2.

I was planning to merge these via the nvdimm tree, not ack them. Did you have another maintainer lined up to take these patches?

#43 lore raw
In reply to Pankaj Gupta
Quoted 6 lines · Pankaj Gupta

Hi Michael & Dan,

Please review/ack the patch series from LIBNVDIMM & VIRTIO side. We have ack on ext4, xfs patches(4, 5 & 6) patch 2. Still need your ack on nvdimm patches(1 & 3) & virtio patch 2.

I was planning to merge these via the nvdimm tree, not ack them. Did you have another maintainer lined up to take these patches?
_______________________________________________
Linux-nvdimm mailing list
[email protected]
https://lists.01.org/mailman/listinfo/linux-nvdimm

#44 lore raw
Quoted 10 lines
Quoted 7 lines

Hi Michael & Dan,

Please review/ack the patch series from LIBNVDIMM & VIRTIO side. We have ack on ext4, xfs patches(4, 5 & 6) patch 2. Still need your ack on nvdimm patches(1 & 3) & virtio patch 2.

I was planning to merge these via the nvdimm tree, not ack them. Did you have another maintainer lined up to take these patches?

Sorry! for not being clear on this. I wanted to say same.

Proposed the patch series to be merged via nvdimm tree as kindly agreed by you. We only need an ack on virtio patch 2 from Micahel.

Thank you for all your help.

Best regards,
Pankaj Gupta

Quoted 1 line
#45 lore raw
Quoted 13 lines · Pankaj Gupta
Quoted 10 lines
Quoted 7 lines

Hi Michael & Dan,

Please review/ack the patch series from LIBNVDIMM & VIRTIO side. We have ack on ext4, xfs patches(4, 5 & 6) patch 2. Still need your ack on nvdimm patches(1 & 3) & virtio patch 2.

I was planning to merge these via the nvdimm tree, not ack them. Did you have another maintainer lined up to take these patches?

Sorry! for not being clear on this. I wanted to say same.

Quoted 7 lines

Proposed the patch series to be merged via nvdimm tree as kindly agreed by you. We only need an ack on virtio patch 2 from Micahel.

Thank you for all your help.

Best regards,
Pankaj Gupta

Fine by me.

Quoted 1 line
Quoted 1 line