Skip to contentSkip to conversation

16BIT SPANSION Flash writing problem with CFI Driver

U-Boot-Users Bastos Fernandez Alexandre 2 participants 2 messages Nov 20, 2006

lore
Share & tools
lore
#0 lore raw

Hi,

Quoted 10 lines
Quoted 6 lines

I didn't enable buffer writes. Once I defined CFG_FLASH_USE_BUFFER_WRITE, all save operations would encounter an error. Actually, I noticed it was unaccptable to enable buffer write for AMD flash.

I guess you can implement CFG_FLASH_USE_BUFFER_WRITE for AMD style flash. The details is in the datasheet. It should speed up the programming anyway.

I use CFG_FLASH_USE_BUFFER_WRITE in my board with a Spansion S29GL032 Flash in 8BIT mode, and til now, it works perfectly.

This mode is the only one allowed in 8BIT mode, so I guess that it is acceptable for Spansion/AMD flashes

Best regards,

Alexandre

#1 lore raw
Quoted 7 lines · Bastos Fernandez Alexandre

I use CFG_FLASH_USE_BUFFER_WRITE in my board with a Spansion S29GL032 Flash in 8BIT mode, and til now, it works perfectly.

This mode is the only one allowed in 8BIT mode, so I guess that it is acceptable for Spansion/AMD flashes

Glad to see your input on this point. My misleading understanding was from old notes in CHANGELOG. Should be updated this time. This way, the implementation of buffer writes support is an issue of 16-bit support.

Thanks,

Sam

___________________________________________________________
Mp3???-???????
http://music.yahoo.com.cn/?source=mail_mailbox_footer