[Buildroot] [Fwd: Re: SDL_image, SDL_ttf & Co (libpng12.So bug)]
A message that is not in the archive (sent off-list or not yet received): [email protected]
Hi,
I was using buildroot version 20061111 and managed to compile SDL_image including the following flags (LDFLAGS) for the linker.
$(SDL_IMAGE_DIR)/.compiled: $(SDL_IMAGE_DIR)/.configured
$(MAKE) LDFLAGS=$(STAGING_DIR)/lib/libpng12.so -C $(SDL_IMAGE_DIR) touch $(SDL_IMAGE_DIR)/.compiled
I checked the dependencies of the generated libSDL_image.so file and it seemed OK, but I haven't tested it yet in the target.
But then I changed to a newer buildroot version: 20061124 and the previous modification was not enough, other linker errors appeared, regarding the host directfb library.
I had to change the sdl.mk for SDL adding the following line to configure:
--disable-video-directfb
(I am not using directfb, only the framebuffer)
I am now having problems compiling SDL_ttf ...
Regards,
Quoted 19 lines
Hi,
I have tried an older Buildroot version (20060217) and
SDL_imageis compiling fine. uClibc version is the same (0.9.28) than on my "non working" Buildroot snapshot (20060908).Claudio, which Buildroot version are you using ?
Does somebody from buildroot team working on the very similar DirectFB/libpng12.so bug (ID 959) has already found something ?
regards,
Julien_______________________________________________
buildroot mailing list
buildroot at uclibc.org
http://busybox.net/mailman/listinfo/buildroot
Hi,
Quoted 8 lines
I was using buildroot version 20061111 and managed to compile
SDL_imageincluding the following flags (LDFLAGS) for the linker.$(SDL_IMAGE_DIR)/.compiled: $(SDL_IMAGE_DIR)/.configured
$(MAKE) LDFLAGS=$(STAGING_DIR)/lib/libpng12.so -C $(SDL_IMAGE_DIR) touch $(SDL_IMAGE_DIR)/.compiled
Well I investigate a little too and find that when removing "showimage" example compilation from Makefile, then I was able to compile SDL_image. (The error on libpng12.so is during showimage tool link.) But if think your solution is cleaner
;-)
Quoted 4 lines
I had to change the sdl.mk for SDL adding the following line to configure:
--disable-video-directfb
ok ,thanks for the tip !
Quoted 1 line
I am now having problems compiling
SDL_ttf...
I had problems too :-). I suppose you have the same: missing OpenGL library. I was able to compile SDL_ttf (2.0.8) when adding the following options to configure:
--disable-sdltest --without-x --disable-opengl
I attach my SDL_ttf makefile if it can help you. Let me know if it solves your problem !
regards,
Julien
-------------- next part --------------
A non-text attachment was scrubbed...
Name: sdl_ttf.mk
Type: application/octet-stream
Size: 2218 bytes
Desc: not available
Url : http://busybox.net/lists/buildroot/attachments/20061127/d139ca79/attachment.obj
Hi,
Thanks, using this flags in configure, SDL_ttf
compiled OK !
Regards,
Quoted 43 lines · julien.boibessot at free.fr
Hi,
Quoted 8 lines
I was using buildroot version 20061111 and managed to compile
SDL_imageincluding the following flags (LDFLAGS) for the linker.$(SDL_IMAGE_DIR)/.compiled: $(SDL_IMAGE_DIR)/.configured
$(MAKE) LDFLAGS=$(STAGING_DIR)/lib/libpng12.so -C $(SDL_IMAGE_DIR) touch $(SDL_IMAGE_DIR)/.compiledWell I investigate a little too and find that when removing "showimage" example compilation from
Makefile, then I was able to compileSDL_image. (The error on libpng12.so is during showimage tool link.) But if think your solution is cleaner
;-)Quoted 4 lines
I had to change the sdl.mk for SDL adding the following line to configure:
--disable-video-directfbok ,thanks for the tip !
Quoted 1 line
I am now having problems compiling
SDL_ttf...I had problems too :-). I suppose you have the same: missing OpenGL library. I was able to compile
SDL_ttf(2.0.8) when adding the following options to configure:--disable-sdltest --without-x --disable-openglI attach my
SDL_ttfmakefile if it can help you. Let me know if it solves your problem !regards,
Julien
Hi,
I have tried your "trick" for SDL_image compilation and even if I put the LDFLAGS you advised I always have the same link error (/usr/lib/libpng12.so pb)
Are you sure it was the only thing you changed ?
Thanks,
Julien
Quoting Claudio Leonel <[email protected]>:
Quoted 10 lines
Quoted 10 lines
Quoted 8 lines
I was using buildroot version 20061111 and managed to compile
SDL_imageincluding the following flags (LDFLAGS) for the linker.$(SDL_IMAGE_DIR)/.compiled: $(SDL_IMAGE_DIR)/.configured
$(MAKE) LDFLAGS=$(STAGING_DIR)/lib/libpng12.so -C $(SDL_IMAGE_DIR) touch $(SDL_IMAGE_DIR)/.compiled