SMSC LAN911x and LAN921x vendor driver
Subsystems (2)
PATCH 1/1 SMSC LAN911x and LAN921x vendor driver
Attached is a driver for SMSC's LAN911x and LAN921x families of embedded ethernet controllers. There is an existing smc911x driver in the tree; this is intended to replace it.
This driver contains workarounds for all known hardware issues, and has been tested on all flavours of the chip on multiple architectures.
Dustin McIntire (the author of the smc911x driver) has also expressed his support for switching to this driver.
Signed-off-by Steve Glendinning <[email protected]>
--- drivers/net/Kconfig | 13 drivers/net/Makefile | 1 drivers/net/smsc911x.c | 2034 ++++++++++++++++++++++++++++++++++++++++++++++++ drivers/net/smsc911x.h | 445 +++++++++++ 4 files changed, 2493 insertions(+), 0 deletions(-)
drivers/net/Kconfig +13 -0
@@ -873,6 +873,19 @@ config NET_NETX <file:Documentation/networking/net-modules.txt>. The module will be called netx-eth. +config SMSC911X + tristate "SMSC LAN911x/LAN921x families embedded ethernet support" + depends on NET_ETHERNET + select CRC32 + select MII + ---help--- + Say Y here if you want support for SMSC LAN911x and LAN921x families + of ethernet controllers. + + To compile this driver as a module, choose M here and read + <file:Documentation/networking/net-modules.txt>. The module + will be called smsc911x. + config DM9000 tristate "DM9000 support" depends on (ARM || MIPS) && NET_ETHERNET
drivers/net/Makefile +1 -0
@@ -194,6 +194,7 @@ obj-$(CONFIG_S2IO) += s2io.o obj-$(CONFIG_MYRI10GE) += myri10ge/ obj-$(CONFIG_SMC91X) += smc91x.o obj-$(CONFIG_SMC911X) += smc911x.o +obj-$(CONFIG_SMSC911X) += smsc911x.o obj-$(CONFIG_DM9000) += dm9000.o obj-$(CONFIG_FEC_8XX) += fec_8xx/
drivers/net/smsc911x.c new file +2034 -0
2,034 lines not on this page · raw message
drivers/net/smsc911x.h new file +445 -0
445 lines not on this page · raw message
Signature · 1 line
1.4.2.4