Set Rev 2.x 86xx PIC in mixed mode.
PATCH 1/1 Set Rev 2.x 86xx PIC in mixed mode.
Hello list,
inside the automatic U-Boot patch tracking system a new ticket [DNX#2006120742000036] was created:
<snip>
Quoted 59 lines
From: Haiying Wang <[email protected]>
Prevent false interrupt from hanging Linux as MSR[EE] is set to enable interrupts by changing the PIC out of the default pass through mode into mixed mode.
Signed-off-by Haiying Wang <[email protected]>Signed-off-by Jon Loeliger <[email protected]>--- cpu/mpc86xx/interrupts.c | 20 ++++++++++++++++++++ include/asm-ppc/immap_86xx.h | 2 ++ 2 files changed, 22 insertions(+), 0 deletions(-)cpu/mpc86xx/interrupts.c +20
-0@@ -80,6 +80,26 @@ int interrupt_init(void) {int ret; +/* +* The IRQ0 on Rev 2 is pulled high (low in Rev 1.x) to +* implement PEX10 errata. As INT is active high, it +* will cause core to take 0x500 interrupt. +* +* Due to the PIC's default pass through mode, as soon +* as interrupts are enabled (MSR[EE] = 1), an interrupt +* will be taken and u-boot will hang. This is due to a +* hardware change (per an errata fix) on new revisions +* of the board with Rev 2.x parts. +* +* Setting the PIC to mixed mode prevents the hang. +*/ +if ((get_svr () &0xf0 ) ==0x20 ) { +volatile immap_t *immr = (immap_t *)CFG_IMMR ; + immr->im_pic.gcr = MPC86xx_PICGCR_RST; +while (immr->im_pic.gcr & MPC86xx_PICGCR_RST); + immr->im_pic.gcr = MPC86xx_PICGCR_MODE; + } +/* call cpu specific function from $(CPU)/interrupts.c */ ret =interrupt_init_cpu (&decrementer_count);include/asm-ppc/immap_86xx.h +2
-0@@ -721,6 +721,8 @@ typedef struct ccsr_pic {uint frr;/* 0x41000 - Feature Reporting Register */ char res10[28 ];uint gcr;/* 0x41020 - Global Configuration Register */ +#define MPC86xx_PICGCR_RST 0x80000000 +#define MPC86xx_PICGCR_MODE 0x20000000char res11[92 ];uint vir;/* 0x41080 - Vendor Identification Register */ char res12[12 ];Signature · 1 line
1.4.2.3
</snip>
Your U-Boot support team