Skip to contentSkip to conversation

seagate: remove BROKEN tag

PATCH New James Bottomley 1 participant 1 message Dec 13, 2006 SCSI

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 seagate: remove BROKEN tag

Apparently the driver compiles and runs, so tidy up some macro warnings and bring it back as unBROKEN.

James

drivers/scsi/Kconfig +1 -1
index 60f5827..adf1639 100644
@@ -1303,7 +1303,7 @@ config SCSI_LPFC
 
 config SCSI_SEAGATE
 	tristate "Seagate ST-02 and Future Domain TMC-8xx SCSI support"
-	depends on X86 && ISA && SCSI && BROKEN
+	depends on X86 && ISA && SCSI 
 	---help---
 	  These are 8-bit SCSI controllers; the ST-01 is also supported by
 	  this driver.  It is explained in section 3.9 of the SCSI-HOWTO,
drivers/scsi/seagate.c +3 -2
index 5ffec27..ff62e97 100644
@@ -114,6 +114,7 @@
 #define DPRINTK( when, msg... ) do { if ( (DEBUG & (when)) == (when) ) printk( msg ); } while (0)
 #else
 #define DPRINTK( when, msg... ) do { } while (0)
+#define DEBUG 0
 #endif
 #define DANY( msg... ) DPRINTK( 0xffff, msg );
 
@@ -523,7 +524,7 @@ int __init seagate_st0x_detect (struct s
 #ifdef ARBITRATE
 		" ARBITRATE"
 #endif
-#ifdef DEBUG
+#if DEBUG
 		" DEBUG"
 #endif
 #ifdef FAST
@@ -733,7 +734,7 @@ static int internal_command (unsigned ch
 	unsigned char *data = NULL;
 	struct scatterlist *buffer = NULL;
 	int clock, temp, nobuffs = 0, done = 0, len = 0;
-#ifdef DEBUG
+#if DEBUG
 	int transfered = 0, phase = 0, newphase;
 #endif
 	register unsigned char status_read;