SMSC LAN911x and LAN921x vendor driver
Subsystems (2)
PATCH 1/1 SMSC LAN911x and LAN921x vendor driver
Attached is a driver for SMSC's LAN911x and LAN921x families of embedded ethernet controllers. There is an existing smc911x driver in the tree; this is intended to replace it.
This driver contains workarounds for all known hardware issues, and has been tested on all flavours of the chip on multiple architectures.
Dustin McIntire (the author of the smc911x driver) has expressed his support for switching to this driver.
--- drivers/net/Kconfig | 13 + drivers/net/Makefile | 1 + drivers/net/smsc911x.c | 2095 ++++++++++++++++++++++++++++++++++++++++++++++++ drivers/net/smsc911x.h | 417 ++++++++++ 4 files changed, 2526 insertions(+), 0 deletions(-)
drivers/net/Kconfig +13 -0
@@ -873,6 +873,19 @@ config NET_NETX <file:Documentation/networking/net-modules.txt>. The module will be called netx-eth. +config SMSC911X + tristate "SMSC LAN911x/LAN921x families embedded ethernet support" + depends on NET_ETHERNET + select CRC32 + select MII + ---help--- + Say Y here if you want support for SMSC LAN911x and LAN921x families + of ethernet controllers. + + To compile this driver as a module, choose M here and read + <file:Documentation/networking/net-modules.txt>. The module + will be called smsc911x. + config DM9000 tristate "DM9000 support" depends on (ARM || MIPS) && NET_ETHERNET
drivers/net/Makefile +1 -0
@@ -194,6 +194,7 @@ obj-$(CONFIG_S2IO) += s2io.o obj-$(CONFIG_MYRI10GE) += myri10ge/ obj-$(CONFIG_SMC91X) += smc91x.o obj-$(CONFIG_SMC911X) += smc911x.o +obj-$(CONFIG_SMSC911X) += smsc911x.o obj-$(CONFIG_DM9000) += dm9000.o obj-$(CONFIG_FEC_8XX) += fec_8xx/
drivers/net/smsc911x.c new file +2095 -0
2,095 lines not on this page · raw message
drivers/net/smsc911x.h new file +417 -0
417 lines not on this page · raw message
Signature · 1 line
1.4.4.2
Quoted 4 lines · Steve Glendinning
Attached is a driver for SMSC's LAN911x and LAN921x families of embedded ethernet controllers. There is an existing smc911x driver in the tree; this is intended to replace it.
Quoted 8 lines
This driver contains workarounds for all known hardware issues, and has been tested on all flavours of the chip on multiple architectures.
Dustin McIntire (the author of the smc911x driver) has expressed his support for switching to this driver.
Signed-off-by Steve Glendinning <[email protected]>
This patch has just been tested on my Freescale mx31 board, with a smsc9117, and Linux version 2.6.16.19. I agree to include it in mainstream.
old smc911x is restricted to one architecture (PXA) and one chip (9118).
Signature · 1 line
Pierre Tardy